5510 - prints via USB and wirelessly but can't print emails from ePrint on iphone

Just installed new Photosmart 5510. Prints fine via USB (main computer) and wirelessly (laptop) but I can't print anything from ePrint app on iPhone. HP ePrint Home & Biz works from iPhone but it doesn't have email printing function!

Hi Andy760,
From your iPhone, printing email would be from Apple Airprint. With your email open, touch the action button and select Print. You might have to select the printer, but it should print fine at that point.
To send email to print by using ePrint, you would forward the email to the printer's ePrint email address. Have you registered the printer on www.eprintcenter.com?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

HP210a print jobs fail over wireless, but can still print Test Diagnostic page over network

Help! I cannot print over the wireless network anymore. When I try, the print job queues up and I get "Error - Printer" message. I can print the Test Diagnostic page just fine over the network. I can also print fine when connecting via USB port. I have the latest firmware. Any ideas?

Hi HP_210a_user,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 210a printer and not printing over wireless. HP Print and Scan Doctor.
The HP Print and Scan Doctor will help resolve this issue. I would also restart the printer. Unplug wait 1 min plug back in.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I synched iPhone and PC but can't locate any of library on iPhone - am i missing something obvious ?

i synched iPhone and Pc but can't locate any of library on IPhone - am I missing something obvious ?

What did you select to sync?
It will only sync what you tell it to sync.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

Unable to print via Airprint and Wireless - Print utility (wireless) is working fine

Hi,
I have a Photosmart 310a (Device model number: CN503B). I am not able to print wirelessly or via Airprint from the iPhone or from the Mac. But the Printer Utility (Mac OS X Lion 10.7.2) can connect to the printer (wirelessly) and show infos and prints test pages.
I have restarted the printer, checked that the networksettings are correct. Is there anything else to try?
Thanks.

Hi Nic0linux,
Try unplugging the printer for about a minute. Make sure the iPhone is also connected to the same wifi network as the printer. Also, try checking for product updates on the printer. Go to "setup" > 'web menu' > "product updates" > "check for product updates". If there is an update available then allow it to install. The printer will then reboot itself after it installs the update. Try AirPrint again. If that still does not work, try unplugging the printer, router, and power cycle the iPhone. When you power everything back on, you want to let the router get booted back up completely first, then the printer (make sure that the printer is still connected to your wifi), then the iPhone. Then try to AirPrint again. I hope some of this information helps. If you still need further assistance, please don't hesitate to call us at 1-800-474-6836 and ask to speak to Cloud Services.
I am an HP employee.
Josh M.
Although I work for HP, my posts and replies are my own opinion and not those of HP.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!

Sharing printer with PC using bonjour but can't print in color

I successfully shared my HP Photosmart C3100 printer with windows XP, got the test page printed out...but no color. I tried changing different drivers as other threads recommended (Apple Color LW12/660PS, Apple Color LaserWriter 12/600, Apple LaserWriter 12/640 PS, Apple LaserWriter 16/600 PS, and even the HP C3100 driver. Still can't get the color print out. I print the test page in color directly from Mac with no problem though. Have anybody experience this problem before? Please help....thank you.

Hi AppleForum, and a warm welcome to the forums!
Not too familiar with Windows, but is there not something in the Printer Dialog that selects B&W , Grayscale, or Color?

Printer is Connected to Wireless but Won't Print

I've tried restarting (both the iMac computer running Maverick 10.9.4 and the Photosmart Premium 310 printer) Tried deleting and reinstalling the printer. It passes all the diagnostics. It prints things from the web apps on the keypad. It was working fine last night and now will print nothing from the computer. I cannot figure out what to do next.

Hi AngieOli,
Welcome to the HP Forums.
I see that you are having an issue when attempting to print from your Mac.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I am also going to give you two documents. The first one gives instructions on How to reset the printing system.
The second document is for how to Repair disk permissions.
Please let me know how you make out and if you have any othe questions, please feel free to write back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I can send but can't receive emails through exchange on iPhone 4s

I can send but cant receive exchange e-mails on my iphone 4s. My older Iphone 3 worled fine, and still does on wifi. I have deleted and reinstalled, I have restarted the phone and tried different settings. When I check for emails, it just looks and looks and then stops looking with no e-mails showing up (even when I know there are e-mails). I can send emails fine. Any help or advice is appreciated.

There's clearly something wrong with your incoming mail server. Double check with your IT department to see what the proper settings are.

On my iPad I have installed the update ios 7.0.4 and now I can't send emails from the mail app is it just me or a problem with the update?

On my iPad I have updated the software to iOS 7.0.4 and now I can't send any emails from the mail app. Is this me or the update?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

"Sender Name is Invalid" (can't send email from POP account) iPhone 2.1

I updated from V2.0.2 to V2.1 today. I also swapped out my original iPhone EDGE for a new iPhone EDGE due to unrelated problems with the speaker.
Upon testing things after restoring from backup to the new phone I discovered that I could no longer SEND email from my POP account. I could receive email just fine on that account. Sending and receiving email on my MobilMe account also worked, as did sending and receiving email via the POP account while on the Mac computer I use to sync with this iPhone.
After digging into this with AppleCare we discovered that somehow the Port Address for the Outgoing Mail Server for that POP account had been changed from 25 to 587 on the iPhone.
Changing it back to 25 fixed my problem.
We don't know whether the problem was due to the 2.1 upgrade or due to something in the restore process after swapping the phones.
If you get the error message "Sender Name is Invalid" while trying to send email from a POP account on your iPhone, go to Settings > Mail, Contacts, Calendars and select the line for your POP account.
Now scroll down to the Outgoing Mail Server entry which should show "SMTP" and the name of the outgoing mail server for that POP account. Select that line. This will display a list of servers with your POP account server showing at the top as the Primary Server. Select that line.
In the panel that displays, check the Server Port. If it is something odd like 587, that may be your problem. Select the line and you can edit it to something more normal like 25. Touch the "SMTP" button at the top left of the number entry screen to accept that new value.
We discovered that after correcting that value on the iPhone it STAYS corrected even after doing a new Sync with iTunes, or after MobileMe syncs.
--Bob

Sorry you had problems Bob.
Depending on the mail service you are using, Port 25 or Port 587 are usually acceptable for outgoing
SMTP mail. Many cafes will block the customary port 25 to prevent spammers from using their
wireless access.
There is a superb tutorial posted here:
http://www.webmail.us/docs/support/Macintosh-OSX-Mail.pdf
Also be sure for each mail account to turn ON the secondary AT&T server shown at the bottom
of the SMTP server list for each account -- it will make your transition from wireless to Edge
to 3G networks much more reliable.
Thanks for sharing what you've learned. Hope this helps.

TS3899 I can not send email from my new iphone 4s. I keep getting message 'set password for msn' acct.

Why can't I send email from my new 4S? Message keeps telling me--enter password in settings..
And where do I find my 'operating system'. (ie 5.0.1 etc)

I have a 1st gen iPhone that I just updated the software to 2.0.2
Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
Anyone???

Can't get airport express to print. Music transfers wirelessly but not the print. How do I fix this

I cant get the airport express to connect to computer for printing. It does connect for music but not printing. How do I correct this

Don't know, how did you hook it up (what kind of cable)? You can send audio through an HDMI connection provided a MacBook Pro is (I believe) from 2009 or newer.
Converting to VGA or DVI will not send audio - if you're using that kind of connection, you'll need to add an audio cable from the headphones port.
Also check the Sound Out setting in the Sounds panel of System Preferences.
Matt

Connecting a Printer to USB and AirPort Express Simultaneously

I have a Samsung laserprinter - the only connection on it is USB. I currently have this connected to a XP laptop.
Aswell as connecting it to my XP laptop, I wish to share the printer around the house. The other computers around the house are a combination of Macs and PCs.
It sounds like a strange request - but - I want to be able to connect the printer to my laptop and to the airport express (for the sharing part) at the same time.
I notice around the web that there are several devices you can buy, which are effectively USB 'splitters' for connecting a USB printer to 2 USB computers at the same time.
Could I use one of these 'splitters' in conjunction with the AirPort Express? In that way, I'd be able to connect the XP laptop to the printer via USB, and the rest of the house would share via the USB/Airport connection.
(Incase anyone asks, the XP laptop is on a different LAN network to the rest of the house, hence the problem).
Has anyone tried this? If so, can anyone recommend a make/model of such a 'splitter' that is proven to work with the AirPort Express?
(Or even better, maybe there is a device out there somewhere that does this without having to buy 2 devices).
Thanks,
Brad

USB is not designed to have two controllers at a given time. Therefore I would not trust one of these devices. It may damage the USB port on your laptop or the AirPort Express (AX).

How to print directly to printer using USB and Bluetooth from Java (J2ME) app.

I write mobile phone apps in Java (J2ME). I want to print directly to a printer via USB and via Bluetooth. I cannot use a print job with the Java available to me. Once upon a time you could just send text and print control characters to a printer. I would like to be able to do that again. Alternatively could you provide a 'skeleton' data stream into which I could insert my code to produce what is sent to the printer when a print job is used with Java on a laptop or PC. I just want to sent simple text with a little formatting.

Hi,
As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information. Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
I am an HP Employee.

What is the difference between connecting a printer via USB or Ethernet ?

What is the difference between connecting a printer via USB or Ethernet ?

When a Printer with an Ethernet connector is connected via Ethernet, it becomes a peer device on your Network. It is available whenever it is on for all users on your Network.
When connected via USB, it relies on your computer to "Share" it onto the local Network. It is only available when the attached computer is on. It takes resources from that computer to facilitate printing for any User.

5510 - prints via USB and wirelessly but can't print emails from ePrint on iphone

Similar Messages

Maybe you are looking for