5600/5641R example not in working order

The 5600/5641R example is a good concept, but it is not working.
http://zone.ni.com/devzone/cda/epd/p/id/6196
When you try and open the host VI in this example (either example since there are 2 included), you will get an error dialog "Not enough memory to complete this operation".
It is very easy to reproduce.
This was attempted on multiple computers, multiple Windows OS (Win XP, 7/32, 7/64), and multiple versions of LV (2010, 2011).
Also tried mass compileing (various settings) with same error.
After trying to load 1000's of VIs (3k-6k dending on system), it chokes.
NI AE also reproduced the problem and recommended posting here to IF-RIO
Trick to get it open
When the error occurs, you can have it stop loading the host VI (be quick with the mouse to avoid looping on the same memory error), and then finish opening the VI without loading addition subVIs. You can close the host VI and have it save the 1000s of VIs it has opened until that point. By repeating this (open, error, stop, open w/o subVIs, close, save all) you can eventually get the host VI open, although everything is in a bad state. At least you can see and edit the host VI.
I think at this point you might be able to recover the example by recompiling the FPGA VI.
a) Is this memory error in loading the example a LV bug that needs to be addressed?
b) Is there some setting in LV that will allow loading without choking?
c) Is there something wrong with the example VIs?
d) Can someone fix the posted example that that it can be opened by most users (i.e. minus the tricks above)?
The example is needed for users with 5600/564xR systems.

Hello Nemo,
I have attached the example with this post. Its the ni5640r with 5600 Downconverter - ASYNC example just saved in LV 2010. I have tested both sets of examples and fixed any broken wires. I am able to replicated the issue you are seeing on LV 2011 and we are looking into what is causing the "Not Enough Memory to Complete this Operation".
I was successfully able to open it in LV 2009, so then I saved it in LV 2009 and opened it in LV 2010. I will post the other example in a new post.
Best Regards,
Jignesh P
Applications Engineer
Attachments:
ni5640R with 5600 Downconverter - ASYNC.zip ‏2732 KB
ni5640R with PXI-5600 Downconverter.zip ‏3480 KB

Similar Messages

How to regenerate COSS table for work order operation planning hours

Hello,
I am looking for a SAP report or a custom solution to update the table COSS table from work order operation hours. Several work orders incorrectly updated in the table COSS with result the cost is incorrect.
For example: In the work order opertions, I have planned 2.5 hrs and in the table COSS it is 1.5.
Much appreciate for your help
Bill

It is quite simple actually.
As soon as your array exceeds SDU (defaults to 2048), sqlnet will fragment the packet. (see: sqlnet more data to client messages in your trace file)
As soon as the packet is bigger than your NICs MTU, the NIC will fragment the packet.
So, depending on the number of bytes for 1 record, high array size make sense or don't make sense.
And ideally SDU should be a multiple of MTU.
So do high arraysizes make sense? Usually not.
Hth
Sybrand Bakker
Senior Oracle DBA

Using a hierarchy but also showing work orders that are not in hierarchy

good morning bi people,
i have a requirement to show data from a hierarchy which includes Operation and Maintenance information. for example it has an account broken into labour/material/trucking and below this is the pm acivity type and secondary cost element (concatenated). this hierarchy is a manually created hierarchy that is uploaded to BW and is not in ECC. The users do not want to see the concatenated field at the end of the hierarchy, but instead, want to see the Work Orders that have the PM activity types.
At the present time, we have the report using the hierarchy but we need the work orders to replace the pm activity type/secondary cost element concatenated field. the work order field is a free characteristic and when we drag in the work order in analyzer, it works correctly.
1) is this possible to use the hierarchy and somehow map the work order field to the end of the hierarchy within crystal?
2) do you have a suggestion to change the hierarchy, without being a manual nightmare?
all conversations are welcome.
Erik

Good Day Ingo,
i have created a word document with screen shots of the hierarchy from BW, a screen shot of the BEx showing the free characteristic of Maintenance Order and a screen shot of the crystal report with the PM Activity type concatenated to the Cost Element. Once again, we do not wish to see the concatenated field, but rather see the Maintenance orders that have a PM Activity type the same as the concatenated field.
here is the link.
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B1j5hXTptfntYWI1MDUzNGEtY2MxNy00YmMzLWJjZjEtZDA4OGZiYmMyNzFh&hl=en&authkey=CKq4xcgJ
thanks Ingo,
Erik

Purchase and release order not allowed for TECO work orders

Hi
We are typically setting maintenance work orders to TECO once the physical work as been performed as that sets the reference date for showing the history of when the maintenance was performed, and when the maintenance call was completed. However, we have invoices that may come in significantly later than when the physical work was performed.
Once the order is in TECO a purchase or release order (for services against a contract) cannot be created for the work order. Additionally it appears that even if we have a release order,or purchase order, if it is not for the exact amount of the invoice the release or purchase order cannot be ammended - we get the sameerror mssage (BS007) as when creating a new purchase order for the TECO order.
I had wondered about using BS22 to change TECO to continue to allow purchase and release orders when the order is in TECO status.
Any input on pros/cons or other approachs appreciated.
Philip

Thanks
That was what I initially thought. However I was informed that if the invoice is not for the originally determined amount that to post the invoice means having to change the PO, and changing the PO appears to hit the same business transaction as creating a PO, and so we get the error mssage.
The issue is that we may know we need to have services estimated at, say, $5.000. But we do not know what the actual final invoice will be. So the actual amount may end up being $4,500 or $5,500 as an example, and it may come ni late from the vendor. The Purchse Order side is not my expertize, but I am being informed that the invoice must match the PO amount, otherwise the PO must be ammended to match. As the order is in TECO, the user cannot amend the PO.
I would be happy to know of other options, or at least good questions to ask. I want the end user to be able to post the invoice against the PO, after the order is in TECO, even it the invoice amount is not exactly the same as what was originally anticipated.
regards
Philip

Work order to cost center settlement does not post to GL module (FI)

Dear Expert,
I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
Please advice.
Thank you.
KH

Hi Kiran,
The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
Change the cost center from period in the past date and try.
BR, Srinivas Salpala

Attachment not shown in Work Order

Hi, Using Oracle Document ID ID 882952.1, we have configured oracle Functionality to attach Manual / documents in EAM Work Order, but followed all steps as mentioned Oracle Document but attachments are not showing in Work Order when we try view that specific attachment from Maintenance Super User.
Regards
Umair

Thanks for answering.
Well, we have same archivelink customizing in another systemo for MIRO transaction and it works fine.
There's a development, of course. There's a job that executes a program and attaches the pdf from a server, etc.
So we can attach pdf files when entering an invoice. Guess there's a missing step, but don't know exactly which.
Maybe basis people blocked something, but we don't have a clue.
Regards,
J

Error creating work order for new notification - Related SyncBO not present

Hi,
We are working with MAM3.0 standard application.
We age getting an error while creating work order for a NEW notification.
In this scenario both notification and corresponding work order are also not created.
Here is the error for MAM30001 Sync BO in MEREP_MONI:_
Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
External format successfully converted to internal format: ldata=TOP0001000000000000000
Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
Return code 1 (DOWNLOADER)
   Here is the error for MAM30010 Sync BO in MEREP_MONI:_
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code from RFC BAPI Wrapper call:The order/network type is not defined
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code 0 (UPDATE MEREP_506-STATUS)
Can any body please tell me what is the sollutions for this error
your help in this regard is appreciable.
Regards,
Murthy

Hi Murthy,
II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
Hope that helps.
Regards,
Oliver

When I download an excel spread sheet from a Ford web site I seem to be getting code and not the work sheet. Example- MIME-Version: 1.0 X-Document-Type: Workbook Content-Type: multipart/related; boundary="====Boundary===="

I have a Macbook Air. I have MS office installed and work in Excel often with no issues. But When I download an excel spread sheet from a Ford web site I seem to be getting code and not the work sheet.
Example-
MIME-Version: 1.0
X-Document-Type: Workbook
Content-Type: multipart/related; boundary="====Boundary===="
--====Boundary====
Content-Location: file:///C:/HOLD.XHT
Content-Transfer-Encoding: 8bit
Content-Type: text/html; charset="utf-8"
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<HEAD>
<meta name="Excel Workbook Frameset">
<xml>
<x:ExcelWorkbook>
<x:ExcelWorksheets>
   <x:ExcelWorksheet>
    <x:Name>BTB</x:Name>
    <x:WorksheetSource HRef="./IBIT0001.xht"/>
   </x:ExcelWorksheet>
   <x:ExcelWorksheet>
    <x:Name>GSM</x:Name>
    <x:WorksheetSource HRef="./IBIT0002.xht"/>
   </x:ExcelWorksheet>
   <x:ExcelWorksheet>
    <x:Name>RODetail</x:Name>
    <x:WorksheetSource HRef="./IBIT0003.xht"/>
   </x:ExcelWorksheet>
</x:ExcelWorksheets>
</x:ExcelWorkbook>
</xml>
</HEAD>
</HTML>
--====Boundary====
Content-Location: file:///C:/IBIT0001.xht
Content-Transfer-Encoding: 8bit
Content-Type: text/html; charset="utf-8"
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<HEAD>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<style>
<!--table
        {mso-displayed-decimal-separator:"\.";
        mso-displayed-thousand-separator:"\,";}
@page
        {margin:1.0in .75in 1.0in .75in;
        mso-header-margin:.5in;
        mso-footer-margin:.5in;
        mso-page-orientation:landscape;}
tr
        {mso-height-source:auto;}
col
        {mso-width-source:auto;}
br
        {mso-data-placement:same-cell;}
.style21
        {color:blue;
        font-size:10.0pt;
        font-weight:400;
        font-style:normal;
        text-decoration:underline;
        text-underline-style:single;
        font-family:Arial;

Try search/ask in the forum devoted entirely to Excel issues:
http://answers.microsoft.com/en-us/mac/forum/macexcel

Amount Column not showing up in Work Order

Hi,
We use SAP Business One 2007A. We have a work order program which is an add-on. When viewing a list of work orders or when viewing open items list for work orders, the amount column does not show up. I tried everything with the format settings and it wont work. Any solutions to this?
Please let me know..
Thank you,

Hi,
Welcome you post on the forum.
What add-on is this? Is this open item list for work orders by the add-on?
Thanks,
Gordon

Why are my Contacts NOT in alpha order (neither First nor Last order works)?

It doesn't matter what order I specify in Preferences, the Contacts are not in alphabetical order. This is crazy! What am I doing wrong?
It has to be something very simple and it's right in front of me, but I just can't see what the problem is.
Thanks.
Matt

It could be that you have spurious characters in the filenames? When you do a Manual sort a hidden file is created in the folder you are working in .BridgeSort this is just a text file with the list/order of the files. It might be worth having a look at the file and see if anything strange is happening.

PReq quantity not synchronized with work order.

Hello,
I have a work order for which created Preq for external component with quantity 10.
Then when converting PReq into PO I have change the quantity to 5. So I have PO with quantity 5 but in the work order requirement quantity is still 10. When trying to change it on work order level I'm getting following error message: 'A purchase order already exists for purchase requisition ...'
Does anyone of you know if there is any option to synchronize quantity in work order level with PReq and PO? I know that for the sales orders there is t-code VA07 for Comparison of Orders with PReqs and POs. Do we have the same option for maintenance work orders?
Thanks in advance for any clues.
Regards,
Grzegorz

Grzegorz,
This is generally a information message and not a error message. Check whether someone has changed the configuration for the message number from "I" TO "E" under Spro> pm > Maintenance and service processing > Config control > Define attributes for system messages.
Regards
Narasimhan

How to reset Work Order System Status -NCMP Not completed

Hi Friends,
Please can anyone guide me how do I reset / revert the NCMP (Not completed) System Status of the Work Order. The System Status comes after I have done the Function of "Do Not Execute".
Thanks in Advance.
Anant

Hi,
1. You cannot reset it back . For future cases ensure to grey out the option using Transaction Variants SHD0 for IW31/IW32 Tcodes
2.Steps to create transaction variant http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true
3.You can also explore user exit :IWO10026 User check on setting status 'Do not perform'
regards
pushpa

Eq. not copying from Maint. Work order to Work Approval in WCM

Dear Experts,
While I am creating Work Approval from Work Order, Equipment number is not copied from Work Order as per screenshot. why?

Greetings Parag,
You have "Reference Object" in your Sequence above the "Reference Object with Installed equipment", which makes the transaction first fill the Functional Location only, and afterwards, the Equipment field is grayed out by the time it gets to copying it.
Swap the Sequences of fields 50 and 200 or delete the field 50 from copy settings in
SPRO > Plant Maintenance > Work Clearance Management > Master Data > Data Transfer When Creating with Template > Define Fields

Interest not calculating on work orders

Hello,
We have an issue with interest calculation on work orders in the
There is a work order on which monthly interest is
not calculating any more even though there is balance left with the
order.
The interest got calculated till May,2011, but after that interest
calculation got stopped.There is no investment profile is maintained in
the WBS element to which this order is linked.
Please advise.
Thanks & Regards,
Tapan Patro

Hi,
Check the change documnets (CN60) for the WBS to see if the interest profile was removed. If yes, populate the appropriate profile and try the interset calculation again for the WBS.
regards
Sreekanth

Resetting the "DO not Execute " in closed work orders.

Hi Guys,
I have a scenario where I have to open old and closed work orders to make some changes and then save it. I am facing problem wit some work orders which were closed by using the "do not Execute" option, is there a way to reverse it so that I can update the work orders and then closed them again?
Thanks and regards
Anoop Sharma

Reference [Thread|changing of system status do not execute]
-S.N

5600/5641R example not in working order

Similar Messages

Maybe you are looking for