6.0.6.0_PDK_BP for EP 6.0 Sp2 Problem to deploy
Greetings,
i have a problem to deploy the PDK 6.0.6 with the SDM tool. It throws a message like:
"WebDynpro_Eventing.ear is not a .sca file ..."
I heared somewhere, that i have to delpoy "Webdynpro" on my J2EE Engine, on which the portal runs.
Where can I get these "Webdynpro" component?
Or do i have to do something else?
Thank you for your help?
Nils Kloth
Hello Gregor,
thank you for your help.
This is because the PDK SP 6 needs a WAS 6.40 with the Webdynpro Technology?
So we have an Portal 6. Sp2 on a WAS 6.2 .Is there a possiblity to update the WAS to 6.4 without a new installation of the portal? It doesn't need to be save method, because this is only a testserver for my diploma work.
Or do i have do update the portal and not the WAS?
Thank you for your help
Nils
Similar Messages
-
My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement. I have no apple care so I'm worried. My phone has NEVER touched water! I only get 1/5 of battery use. I've also spent 30$ at the apple store on screen protectors for nothing! I really don't have 220$ nor 50$ I am on a strict budget. I believe I have to pay 220 not 50 ford a phone replacement for accidental damage. I don't know what category this falls under. I really need a new phone or battery. HELP! Will I have to pay? Also my screen lighting is all topsy-tervy every I put my screen on highest it won't work I have to wait about a minute? Forgot to mention that my apps exit out by themselves all the time when Im using them.
So, have you tried a reset? Restore from backup? Restore as new? You seem to have a few problems but do not mention any action taken to resolve them. What have screen protectors to do with anything?
-
After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool -
No portal roles are assigned for this user.If this problem persists, contac
I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AMBalu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu -
Trying to get into the App Store to update some apss. It asks for my password but the problem is that it is showing ghosted an Apple ID I don't use. Can't figure out how to fix it.
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test. -
Looking for a site that shows problems with windows patches or updates.
Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestionsHi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support -
I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it. Any ideas? I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.
Looks like its fixed. I am syncing it now. A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well. My old phone is now an 8 gig ipod. the books app no longer works and that *****.....but better than nothing...
-
I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
A possible solution for "foreight language keyboard shortcut" problem...
Hi(Bonjour)!
Everyone know the problem of losy keyboard layout when Final Cut is used with foreight language keyboard. We loose the COMMAND-Q shorcut.
As PieroF suggested in many posts in final cut express forum, there is a workaround:
"+I just installed Leopard and I ran into this keyboard shortcut problem.+
+I can confirm that:+
+a. the problem exists also with the Italian keyboard (in addition to other languages, as pointed by other posters)+
+b. the workaround I described in my previous answer works fine :+
+- close FCE (if open)+
+- open System Preferences/International/Language+
+- drag English to the first place on top of the other languages+
+- drag your own language (Italian in my case) again on top of English (at the end the window will show the same original settings, but something happened in the heart of Leopard...)+
+- close System Preferences+
+- open FCE: now all shortcuts work as expected, and are correctly listed with their corresponding menu commands+
+It's a workaround, it's not convenient (I'd better have this bug fixed), but apparently you have to apply it only once for each system startup.+
Piero "
As stated by Piero, you have to follow this procedure after each computer startup.
I found a way to restore the COMMAND-Q shortcut with the keyboard and mouse system pref panel.
Simply add Final Cut application and add a +custom shotcut+. Be careful to type exactly the "Quit Final Cut Express" menu.
This solution allows to restart the computer.
It's work with Final Cut Express and Final Cut Pro under Leopard 10.5.4.
Michel BoissonneaultHi Michel,
I like your suggestion because the keyboard shortcuts defined in the system preferences do not require redefinition at each startup. So in theory we could define all missing/wrong shortcuts this way, and not only the cmd-Q as you suggested. Boring, but we could do it once for all.
The only problem is that I don't know how to define shortcuts for submenus, for example "Render Selection/Both": it seems system preferences allows only to define shortcuts for the menu ("Render Selection" - in this case absolutely useless) but not for the submenu.
Do you know a way ? (I looked in the help, which didn't... help).
Piero -
R/3 connection using JCA For Ep 6.0 SP2 !!
I am able to connect to R3 system from the Ep 6.0 Sp2 portal using IConnectorService (JCA).
I am trying to find a solution where I can generate java proxy for BAPI's so that I can eliminate data mapping between R3 and Java in EP 6.0 SP2 environment.
In EP 6.0 Sp4, the Netweaver Developer Studio provides a "SAP Enterprise Connector" wizard which generates proxy classes for java but uses JCO to connect to R/3 system. It is very usefull since the mapping of data types can be done in one place for all BAPI's which needs to be called from the portal and also I do not need to constatly look at the SAP GUI for BAPI definitions and return types. I can look at the java proxies to know exactly what I need to pass to invoke a BAPI and what I am getting back. I really like these connector wizard.
Is there a way to generate proxies using some tool for EP 6.0 sp2 using JCA as the mechanism since it is recommended to use JCA from EP 6.0 onward instead of JCO for better performance and management of R/3 connection ??
I appreciate your help !!Thanks Will.
I have two choices to connect to R/3 system from EP 6.0 Sp2 ...
1) JCA : If I use JCA, I may have to write the layer of
mapping the data and calling the BAPI's from R/3
system to java.
2) JCO : I can use the "SAP Enterprise Connector" wizard.
The only thing I have to make sure is R/3
connection management using IJCOClientService
and JCOClientPoolEntry.
I am also aware that the iView's I am writing will be used by lot of users since we are migrating an existing applications functionality to SAP Portal.
So my question is, Which way should I implement the connection to R/3 so that I can achieve better performance and scalability ??
Thanks again for your help !! -
Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected] -
Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)
Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PMNo, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine. -
i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"
Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave -
everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed
Hello mcgivnma,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario
Maybe you are looking for
-
Error while posting A/R Downpayment Invoice with Excisable Tax Code.
While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes. Kindly provide a solution for the same.
-
Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP
Hey all. So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp. After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally m
-
Issue with BAPI_DOCUMENT_CREATE2
Hi experts, I have been facing an issue calling BAPI_DOCUMENT_CREATE2 from a third-party legacy based onto Java. I am calling it to create a document based on DIR(Document Info Record) in DMS(Document Management System) Before I do this I must have d
-
For some reason I can no longer view pdf's properly on my macbook pro. I can open and download them, but there is no text--only squares with question marks in them. Help!
-
I want to transfer photos/videos from my N8 (defaulted to save in the Mass Memory) to my pc. I set the transfer default on my N8 to Mass Memory for USB transfer and connect to the pc. On my pc the phone shows up as Removable Disk (G). Clicking on