6.5 Upgrade and Adaptive Layouts

I just upgraded from ALUI 6.1 to 6.5. When I edit the experience definitions, under 'Edit Object Settings' there is no option for 'Adaptive Page Layout Settings'. I checked Configuration Manager and Adaptive layout mode is enabled. Did I miss something in the upgrade process?? or am I just missing something obvious?
Thanks,
Jason

Jason,
For me it appears on the left panel beneath login settings.
You may need to be logged in as an admin account to see it, not sure.
Otherwise verify your install and that you loaded all the pte files. You can do that by looking at the source code of any of your portal pages and at the bottom of the page it'll tell you the version.
It should look something like this:
<!-Portal Version: 6.5.0.323160, Changelist: 323160, Build Date: 03/21/2008 at 12:21 AM-->

Similar Messages

  • Scrolling, and Adaptive Layout help

    Hi guys, I am new to edge animate,
    I would like to know, like when a person scrolls its scrolls to a cirtain point seemlessly, not like when you are using a mouse, like blobk by block.
    also I would like to know more about adaptive layout, if anyone can help me more thorught skype,
    I would me really pleased, thank you
    my skype is Kevin2019170
    Thank you

    Well, only can help you with the background image...  put this code on document.compositionReady and window.resize events:
    var imageRatio = 1.7777; // Aspect 16:9, you can use any proportion depends of your image dimensions
    var sWidth = $(window).width()
    var sHeight = $(window).height()
    if ((sWidth / sHeight) > imageRatio) {
      sym.$("imgBackground").css("width", sWidth +"px");
      sym.$("imgBackground").css("height", sWidth/imageRatio +"px");
    else {
      sym.$("imgBackground").css("width", sHeight*imageRatio +"px");
      sym.$("imgBackground").css("height", sHeight +"px");

  • Adaptive Layout - Portlet horizontal alignment

    Is it possible to create an Adaptive Layout with horizontal alignment of portlets in a column?
    Attempting to create a layout with column1 above column 2 and column3 along right side of page.

    I apologize for the late response.
    I was not able to switch the alignment. I moved on to another approach due to limited time.
    Adaptive layouts are a composite of the base portal css styles and adaptive layout styles. It is difficult without a tool that is able to pull all the components into a single view based upon references. (Now that would be a useful tool.... anyone listening). The most useful tool i have found so far is Dreamweaver, it allows you to create custom tag libraries for limited design help.
    I welcome any input on a tool that can handle the tag libraries.
    I will update this thread if I make any discoveries.

  • Uploaded new itunes upgrade and now some music can not be located. a screen appears and says you need to locate the songs in other folders. Any ideas? New upgrade sinks

    Hello
    just did the the new upgrade and now half of my songs are not playing. A screen appears and says you need to search for your music in folders. What the heck happen with this ? Anybody have any issues too?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • On transaction FBL3N  report change layout and save layout icons  not activ

    Hi,
    I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N  report change layout and save layout icons  not active; only select layout icon is active.
    Please advise how these two icons can be activated.
    saeed

    Hi,
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70.
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: You can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    I guess that your user-id have set activity 03 for this object.
    The SAP notes 374656 and 409190 are recommended.
    So, if the values 01 and 02 are not included, then
    the user can't change and save layouts.
    For the line item display in FI the authorization
    object FI_IT_ALV has been created as an extra security check in addi-
    tion to the ALV authorization object S_ALV_LAYO.
    Please check note 374656 where you should be able to find
    relevant info about this. Also note 637554 should be helpful.
    Regards,
    Aidan

  • Adaptive Layouts questions

    I did a little work with the layouts when 6.5 came out but am starting afresh with the 10.3 layouts since they seem to have been cleaned up. I have a few quick questions!
    1)
    The first layout I'm looking at is the Base Page Layout and right off the bat I'm trying to figure out what the basepagelayout-navarea.html file is, and why there isn't a layout web service created for it out of the box. Any ideas?
    I created a webservice for it and plugged it in and the layout seems to remove all adaptive styling from community pages, but the KD and search layouts fall apart. I went through the documentation but couldn't find anything related to this layout. Any suggestions?
    2)
    I've noticed that the basepagelayout causes an issue when you visit the "My Account" section. Basically it forces the footer to display to the right of the rest of the portal window. This only happens in IE8.
    One way to correct this issue would be to remove the 'align="left"' entry in the table of the "My Account" section by creating a new "My Account Layout". But it seems odd that this fails right out of the box, so I'm wondering if there is another workaround or reason this is happening?
    This is a snippet of the code that duplicates the issue in case anyone has a suggestion, or is bored/curious:)
    <table align="left" width="100%" bgcolor="green">
    <tr>
    <td>
    My Account
    </td>
    </tr>
    </table>
    <table width="100%">
    <tr>
    <td bgcolor="red">
    Weird Alignment
    </td>
    </tr>
    </table>
    Thanks
    Geoff

    You can get rid of this issue by adding an extra DIV element arount the pt:basepage.content tag in the BasePAgeLayout.html
    <div style="float:left;width:100%;">
    <pt:basepage.content/>
    </div>
    Regards
    Santosh
    Edited by: user10406069 on Oct 5, 2010 10:38 AM

  • FBL3N  change layout and save layout icons  not active

    Hi,
    I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N  report change layout and save layout icons  not active; only select layout icon is active.
    Please advise how these two icons can be activated.
    saeed

    You are missing an authorization object in your user profile.  Run FBL3N and then run SU53 to see which auth obj is missing.  Then send those details to your Security.

  • Adjustments in Adapter and Adapter modules in PI 7.1

    Hello Friends,
    In a document related to  PI 7.1 ,I have seen these words...
    <b>All your adapters and adapter modules have to be adjusted when you upgrade the system</b>
    So while doing upgradation from SAP XI 3.0 to PI7.1
    What all adjustments we have to do in Adapters and Adapter modules.
    Thanks in Advance

    Hi,
    Check the below link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
    chirag

  • "add topublic part" &"Upgrade to adaptive rfc"

    hi
      I hav made an application and now i want to make change in the structure used in R/3 and need that fields to be used in my application.
      The problem is when i try to reimport my model by right clicking on the model name , "add to public part"
    "Upgrade to adaptive rfc" in disabled . I am not able to recognize whether i hav defined my model as "Public".
       How to reflect the fields changed in structure in r/3  in my application.
    Regards

    hi kamlesh,
    Dont you have reimport model option when u right click on the model??
    Upgrade to adaptive rfc will be disabled only but you should have reimport model option... its something strange...
    Regards,
    Sirisha.

  • Search Module for adaptive layout

    Hi BC Community,
    I am creating an adaptive layout site for my client (so, desktop/tablet/mobile versions).  I am using the search module in the site design, which is working quite well, however, on the desktop site, it is showing pages from the mobile and tablet sites in the search results.
    Does anyone have a work around to solve this issue?  For the desktop search results, I just want it to show desktop pages, same goes for tablet and mobile.
    Thanks in advance for your help with this.
    Aaron

    Hi,
    ASE 12 is very old and since no Eng support maybe decision made to not use datetime. However, you can certainly request feature - if you are able to create incident we can create Feature and then incident can be used for tracking purposes, etc.
    If unable to create incident please provide details:
    ASE version (exact with select @@version)
    SDK version being used
    code sample to demonstrate problem and the output from such a test
    If you used TDS please provide that trace as well if possible
    Cheers,
    -Paul

  • When will we get a proper form factor adaptive layout function?

    I'm deliberately not putting this in the long requested features thread because adaptive layout isn't a feature, it is a basic function of all Windows Apps, except for those built by Project Siena.
    I was dumbstruck to see that the often requested "support for different form factors" was translated to "exclusively for a specific form factor". Designing for one excludes the others. This is not at all useful.
    While I can understand the need to design for different screen formats portrait versus landscape, because of a fixed layout there should have been:
    1. a template that works for 16:9, 16:10, 3:2 that would adapt to the form factor
    2. maybe a portrait template
    3. and most important a function that combines two templates (as per above) and writes out some code that detects orientation so that
    4. Project Siena could produce/publish/publish for store a single project that would allow use on any form factor, any orientation without needing to specify landscape/landscape flipped only - or portrait (etc.)
    What do others think? To me this is more important than more widgets or anything else. Including Windows Phone would be a nice extra, but to be able to product a single project that would work transparently on all form factors and orientations is now the
    single more important function I need.
    It would be good to have a response from the community and a statement from Microsoft.
    As someone who has 14 (not a typo, 14) apps built with Project Siena in the Windows Store, this is important.
    -- Barb Bowman

    This is a reason why I still don't work on my project design. I don't want to end up to recreating all my design. I think the only way is to add percentage size and positioning into visuals so they will adjust by it self when run
    on different devices. I don't know how it could be done without it. Once you create app with visuals width set to 1000 pixels and run it on device with resolution 800*600 (example) then it obviously won't fit. However to set the visuals
    width to 100% would fit logically to all devices. But this option should be implemented log time ago so we can prepare our apps for this new feature. Am I right or you working on different solution?

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • Cant stand the changes to my Maxx HD with the KitKat upgrade, text colors and keyboard terrible. How can I remove the upgrade and go back to what I had?

    How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.

    Hasn't any business ever heard of the term.
    IF IT AINT BROKE DON'T FIX IT.

  • I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

    I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?  Thanks to you from the UnTechie

    The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
    You cannot reverse the upgrade.

  • What is difference between Startup upgrade and startup migration.

    what is difference between Startup upgrade and startup migration.

    I am having the metalink note.
    STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
    but most of this is now done automatically by STARTUP MIGRATE.
    When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
    commands will be set automatically:
    But i am not sure what exactly the meaning by startup upgrade.
    and exactly the startup upgrade and startup migrate

Maybe you are looking for