6230i Contact Download with Mercedes SAP

I have a Bluetooth SAP in my Mercedes E320 and I bought a 6230i phone to work with it, since it seems to be one of the few models that do.
I have, with difficulty, got the two systems to talk to each other. However, I cannot get the phone book/contact list from the phone to download.
The MB pamphlet that came with the SAP module only talks of downloads on models with Command systems - which I do not have. Discussions in this forum seem to also expect Command.
Has anyone cracked this - or do I have to buy Command?

Hi warlove
Which firmware version is your N95 running, key in *#0000# on standby screen?
The important settings on the phone are:
Bluetooth must be "On","My phone's visibility as "Shown to all", Remote SIM mode must be "On".
If you now go to the car, press the BT SAP device button a few seconds to make the light blink fast and follow your car specific guidance to make the car attempt to connect and pair with the phone, you would get the 16 digit code shown at the car head unit and soon the phone display showing a request to enter this 16 digit code. Once you enter the 16 digit code (quickly enough within the given time) and press OK, pairing is done. You should not get any further requests to enter this 16 digit code. You may however get a request to enter your SIM card pin code, you might switch (temporarily) the SIM PIN code off so that you don't need to bother about that.
Once you have paired the phone, you should go to the phone Bluetooth menu and select the list of paired devices, select the MB telephone and set it as authorised.
You don't say whether this is SAP v1 or v2 but seems a phone bluetooth issue, have you deleted all existing pairings?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

IPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but no longer synchs my contacts?

My iPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but now it longer synchs my contacts - how do I get my contacts downloaded to the command system of my car?

status update -- I tried a lot of other things but finally solved the problem after I removed all the groups from mac address book. (thank-you to my son Ben)
FYI -- along the way I tried doing the reset sync history, which deleted all contacts from the iphone. I initially thought that was a good thing, until I discovered that nothing I tried after that would put the contacts back on the iphone. Next I restored factory settings on the iphone and set up as a new user, but that didn't work either. Or maybe it did; maybe deleting the groups wouldn't have solved the problem if I hadn't deleted all contacts and reset the iphone first.

Nokia n70 with Mercedes Benz Bluetooth SAP V2

i have a mercedes sap v2 bluetooth device and when i try to connect it, it ask me for a connect code do you anyone know what code.i also can't find How do i activate remote sim active setting on at my n70 where is that am i blinde;

Hi daon7800
You have the HFP module which would be fine if you had a N70, but you need the MB Bluetooth SAP V2 A 04 8 0 05 35 module for your UHI and ironically the N95 is one of the few Nokia phones that Mercedes Benz recommend for use with this particular module.
I presume that your wife has updated her phone and the HFP was recommended for a previous one?
Happy to have helped forum in a small way with a Support Ratio = 37.0

BOM Download with prodution order to SAP ME

Hello Experts,
I am having an issue with transfer of BOM with production order to SAP ME and would appreciate your inputs.
The issue is as follows:
I have a product assembled on two different routing. BOM is same and is assigned to respective routing in SAP ECC material master production versions.
I am not sending the BOM to SAP ME and in system rule maintenance, setting for "Ignore BOM update" is set to FALSE.
When I send a production order with routing 1, a corresponding BOM is created in SAP ME and operation assignment is also mapped in the ME BOM.
But when I send a production order for same material on 2nd routing, BOM with assignment of operations from 2nd routing is not created. Instead it refers to the 1st BOM only with assignment of operations from 1st routing.
In both cases correct routing are getting copied though.
I have checked the Request and Response trace report for production orders. In request, components with correct operation assignments are coming. for both the production orders. In the response for 1st production order, BOM reference is coming correctly (either it refers to an existing BOM with same operation assignment or creates a new one).
But the response for the second production order picks up the existing BOM with operation assignment of 1st routing and not creating a new BOM.
As per the help documentation, it is supposed to create a new BOM when there is a difference in operation numbers in BOM downloaded with production order.
Can some guide me on this please?
Thanks in advance,
K S Srinivas

Hello Sergiy,
Thanks for the inputs. I did have a look at the SAP Note mentioned by you. It does describe exactly the same problem that I have encountered. My Basis colleague is looking in to it.
I will revert back once I am done with this.
But in the absence of this, I was able to get a simple work around by creating two alternatives of BOM (same BOM components) and assigning to two production versions of same header material. In this case order download creates two BOMs.
Thanks for the iput.
Srinivas
PS: I have posted another issue. Would be nice of you if you could give your valuable inputs on this too.
Srinivas

Solution to problems synchronizing with Mercedes C...

Warning: this is long but worths reading if you have trouble synchronizing your Nokia's phone book/addressbook with COMAND APS.
I have spent hours looking on Mercedes and Nokia forums for my problem and did not find a posted solution. I have now found a solution myself so I decided to post here hoping it will help other people.
First my issue: I have an E-Class W211 (Apr 2005, UK) with phone pre-wiring, the Mercedes SAP v2 cradle and a Nokia E61i (S60 3rd edition). Till about a week ago the whole was working perfectly: was able to make/receive calls, read/send SMS, synchronize the phone's and SIM contacts to the COMAND, etc.
About a week ago I upgraded the firmware on my phone to overcome some other (irrelevant to this) issues I had. When I got into my car after the phone's firmware upgrade I naturally needed to pair the phone with the COMAND/SAP Cradle. I did everything according to the manual that came with the SAP v2 Cradle and thought all would be good again. Then, I try to re-sync the COMAND's address book with that of my phone's by following the manual's procedure (dial 0000).
The synchronization started ok: phone exited Remote SIM mode, got indication "Please Wait" on Comand and phone went into Sync mode. Almost immediately though I get on the phone "System Error" and just the option to press ok. I pressed ok and few seconds later the synchronization process ended, Remote SIM was activated again but phonebook was not loaded to COMAND. I repeated the same process over and over again, removed pairing and went over the whole pairing process from the beginning but still no luck. Unfortunately neither the phone or the COMAND would give any information on what the problem was.
I checked for many hours on Nokia and Mercedes forums, on Google, etc. but still no luck. I found quite a few people facing the same problem mainly with N95 and E-series phones but no solution. Strange thing was that all were facing the problem from the very first time they tried to transfer their phone's contacts to COMAND while in my case in the past it was working and stopped working after upgrading my phones firmware.
After hours of trial and error (removed recently installed phone applications, restored old phone backups, etc.) without luck I thought the problem would be the new firmware on my phone. But... I had no way to go back to the old firmware but even if I had I would cause the same issues that the new firmware solved again (so "rolling back" the firmware was not a real option). So I started going through every possible "core" phone setting that could have changed with the firmware upgrade to see what could be wrong and voila: if you go to the Connect->Sync menu on your phone you will see there a sync profile called PC Suite. Select it, click Options, Edit Profile and then, Connection. You will see that one option is Server Version. If selected Server Version is 1.2 underneath there is another option called Server ID. These two (Server Version and Server ID) are what cause the problem. You have the option to edit the PC Suite profile and set Server Version to 1.1 (then Server ID option disappears) and synchronization with COMAND will work. But as you might have side effects with PC Suite in this way, the ideal thing to do is to create a new sync profile, copy the settings from the PC Suite profile (you are prompted for this) and then, go and change this new profile so that Server version is 1.1. That was it (at least in my case) and I hope this will be helpful for others too. I also had Mail For Exchange installed on my mobile and removed it but I don't think this was the issue (will actually re-install MfE on my mobile now).
Obviously, this Server Version 1.2 option did not exist on the old firmware of my phone so there was nothing to configure and all was working ok seamlessly but when it came out and set as the default by Nokia caused the incompatibility with Mercedes COMAND.
Good Luck!

Thanks for a thorough description of your problem and devised solution.
I was getting very happy with your description of facts, for I recognized them all. However, in my case your solution did not work: I did change back to Server Version 1.1 of the synchronization profile and still get the "System Error" message.
I have no doubts whatsoever that this happened with the 110.07.127 firmware upgrading.
Do you have any other clue on how to proceed from here?
JB

From where can I download IDES on SAP Service Marketplace?

Hello,
From where can I download IDES on SAP Service Marketplace? Can you any one help me. I have got access to SAP service market place. If its not avilable there then from where can I download the lates IDES for mySAP2005. Thanks in advance.
Regards,
Farooq Shaik.

Hi Raghav,
Believe it or not, it is easy to get the access to download but it might not be easy for your company due to legal reasons.
You can request authorization through your SAP account executive (your SAP sales person!). Download of software is part of the SAP license you have with SAP. You probably wil have to talk to your company's SAP contract contact before talking to SAP.
The reason for this is that there are some different legal issues about downloading software in different country (taxing and asset accounting can be different for physical and downloadable software).
Cheers,
Mike.

Is there any way to contact verizon with a detailed cell phone technical support question?

Is there any way to contact Verizon with a detailed cell phone technical support question? I prefer e-mail so as to provide details (like I am trying to provide here). I have tried in-store personnel (no help at all) and the web chat - they just want to see me more data instead of helping me with my basic problem!
I CAN NOT GET ANYONE FROM VERIZON TO GIVE ME ANY HELP NOR CAN I FIND A WAY TO FILE A COMPLAINT. AT THIS POINT I JUST WANT TO DROP MY VERIZON ACCOUNT BUT I'M SURE THAT IT WILL COST ME A SMALL FORTUNE TO GET OUT OF IT.
Here is my issue:
Chat transcript removed as required by the Verizon Wireless Terms of Service
BELOW IS A SCREEN COPY FROM REDDIT ABOUT SOMEONE WITH THE SAME PROBLEM WITH A VERIZON CELL PHONE
So last night my RAZR MAXX HD did something totally bewildering by spontaneously downloading 2.6 GB of data over the course of ~ 3 hours. Fortunately I was able to catch this problem before it ended up being really expensive, but I still exceeded my 2 GB data plan by 600MB.
The Culprits:
Reddit News Free: 160 MB foreground / 0.96 GB background
Android OS: 0 MB foreground / 1.18 GB background
Several unnamed applications: ~ 350 MB
Screenshots:
The massive data spike
Android OS data usage
Reddit News Free data usage
Weird unnamed processes
Detailed timeline:
5:12 PM: Incident begins according to VZW data usage website (2.60410 GB used). This is around the last time that I used my phone at the laundromat before getting dinner and watching Game of Thrones.
8:04 PM: 50% of data allowance used (txt msg)
8:31 PM: 75% of data allowance used (txt msg)
8:58 PM: 90% of data allowance used (txt msg)
9:13 PM: 100% of data allowance used (txt msg)
10:05 PM: Got the text messages and immediately put the phone into airplane mode
10:30 PM: Took screenshots
10:45 PM: Enabled wifi, installed Kaspersky premium. Scan returned no threats.
11:00 PM: Left phone in airplane mode, went to sleep.
The questions:
What was the root cause of this issue? Did Reddit News freak out as a result of an esoteric bug or was my phone hacked?
If this was a simple Reddit News bug, then why was the Android OS also trying to use such a massive amount of background data?
What the hell are these unnamed numeric applications? I've inspected my process history and this is the first time they have ever attempted to use data.
I'm pretty sure that I can explain this situation to Verizon and get out of having to pay additional data usage fees, but I would like to know more about the problem before I get in touch with them.
all 13 comments
best
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago*
All I can think is your phone may have background downloaded an OTA update, and you'd then be prompted with something like, "As update to your Android system has been downloaded, would you like to install it now?"
I do find it very odd that the update would be 2.6GB. As a rough base, the CyanogenMod 10.1 firmware for your device is well under 200MB, so unless Verizon has a ****-ton of bloatware in the update, or it had to attempt to download multiple times for some reason, it may be a stretch.
But doing a little homework, it looks like the Verizon Razr Maxx was updated to 4.1 in late March. Maybe they're still rolling it out in waves? Have you gotten the update yet?
Edit: Aaaand I just noticed you appear to be running an AOSP-based ROM, which totally rules out a carrier update being sent out.
Edit2: If you want to live dangerously, you could try running:
#kill -9 12289
That 12289 is the PID listed in your screenshot. But don't run that without fulling understanding the kill command.
The ps command could also be of use, but probably not.
permalink
[–]lechnito[S] 2 points 1 year ago
I can confirm that the phone is currently at 4.1.2 and that I wasn't prompted for an OTA update.The fact that both the Android OS and Reddit News processes were simultaneously using an extremely large amount of data is unlikely to be a coincidence...
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago
That is very curious that the spikes happened at the same time.I'm curious. It may have put at least some of that 2.6GB somewhere. You could use a data visualizer tool to see if you can find it, which may lead to more clues.
permalink
parent
[–]lechnito[S] 2 points 1 year ago
The largest directories are:
DCIM: Normal looking photos (90,825 KB)
Android: Primarily map cache data (64,846 KB)
If it was downloading content then it did not significantly save content to storage. It's not like I have anything particularly sensitive on the phone, but the idea that it was uploading a snapshot of my data definitely makes me uncomfortable.
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
Yup, Digital Camera IMages and videos.Somewhere in /sdcard/Android would be my guess as to where a mysterious file would be downloaded, but if it's only 64MB, and mostly map data, I'd safely rule it out.I'm sorry, but I'm stumped here.Edit: I should mention I don't think this is malware, because unless a malicious app gained superuser access, any data it used would show under it's own apk in the data usage list, not Android OS.
permalink
parent
[–]mistrbrownstone 0 points 1 year ago
DCIM: Normal looking photos (90,825 KB)
Was it trying to auto-upload pictures or video to G+?I ******* hate that.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Although I'm not really up to speed with the Android platform, I come from a UNIX background so I feel comfortable running commands. How do I pull up a bash terminal? Do I need to root the phone first?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
There's a number of terminal emulators in the Play Store that work well. You don't need a rooted phone to get to the shell as your user, but any privileged command won't execute unless you can grant it permission from the Superuser app that is installed when you root the device. So you could probably do a ps -e, but not a kill -9.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Got it. I downloaded a terminal emulator but unfortunately those processes no longer exist.Does Android keep a generic log of system level events like /var/log/syslog?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
I don't think so, and I know you'd need superuser permission to read most of the files in /var/log anyway. I'm not super familiar with how Android does its logging, but I do know that the two files of interest are the logcat and dmesg.
permalink
parent
[–]sh0nuff 1 point 1 year ago
Want to mention here that using your settings to set your data cap (set it on your billing day), then you won't go over again.Those text messages are really unhelpful, as they send out well after the data has been used. Chances are good you hit close to the 2GB mark before you received the bulk of the messages.
permalink
[–]kindofabuzz -4 points 1 year ago
Quit installing pirated apps.
permalink
[–]lechnito[S] 1 point 1 year ago
That's definitely not the case here; both my PC and and Android phone are free from pirated apps.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

'Contacts' folder with sub folder cannot be removed after synching via iTunes

'Contacts' folder with sub folder cannot be removed after synching via iTunes
I am trying to remove a 'Contacts' subfolder
ie Contacts < default folder
- Contacts Mysubfolder 1 < Trying to remove this subfolder folder
via my microsoft outlook onto my iPhone.
Despite not having 'Contacts Mysubfolder 1' on my PC's outlook after deleting it, it does not delete the subfolder in my iPhone.
I even restored my iPhone settings to the original via iTunes.
I also replaced my physical iPhone but still synching with my original Apple ID + iTunes on the same desktop.
All I did was after replacement of my iP, i setup my microsoft Exchange account, and there it was, the Contacts subfolder which is no longer around, appears on my iPhone contacts folder list.
My outlook is on Microsoft exchange and I am on iP 3Gs
Please help
Thank you

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
tt2

HT203433 I downloaded apps with one appleid on my iphone. When my account was disabled I set up a new appleid & account. Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id. What do I need

I downloaded apps with one appleid on my iphone. When my account was disabled I set up a new appleid & account. Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id. What do I need to do?

You can write into support and ask for help reenabling the account through this link here:
http://www.apple.com/support/itunes/contact/
Since the applications were purchased on the older account, you will need to log into that account to update them. The newer account will not recognize the purchases because they are not a part of the purchase history for the specific account.

I can't seem to merge a redundant contact list with a current one. If I delete the redundant contact list I will lose all of my contacts that I have (still) been inadvertently adding using this as my default contact list.

When I was working with my old job I had a contact list on my phone that was associated with my job's personal email address. Now that I have a new mac and am now a new full time student I would like to use my new uni email address as my default contact list. I have now made this change but have only just realised that I have been adding contacts for a period of months using this now redundant list.
When I sync my computer with my phone (which is working great using iTunes), I am unable to get all of my recent contacts.
I have three groups:
"All contacts" - I understand this is all of my contacts on my phone
"All from My Mac" - This is my new list and constitutes around 80% of my contacts
"Contacts" - This is the old list from my previous employer and contains (I think) 100% of my contacts. Well all of my useful ones anyway - maybe 99%. I would like to delete this group as I don't use the email address anymore and don't work for them!
The end result that I am looking for, is a complete list of ALL of my contacts synced with my computer in Outlook, and to be able to delete my old work contact list!
Please help (you bunch of legends).
Dave

Launch iTunes on your computer.
From the menu bar click iTunes > Preferences then select the Advanced tab.
Click Reset warnings and Reset cache
Click OK.
Restart your computer, launch iTunes.
Click Store > Check for Available Downloads...

How do I stop my contacts syncing with Outlook 2011?

Hi - I have been using Outlook 2011 but I want to stop using it because it's really buggy. I have opened sync services in Outlook and unchecked all, but how do I make my contacts sync with Address book again? At present they will not

What is syncing between them ? If calendars, contacts, safari favourites then are you using the same iCloud account on both devices and have them enabled in Settings > iCloud on both ?
If apps, music, and/or ibooks that you buy on one device are automatically downloading on the other device then do you have automatic downloads enabled for them in Settings > iTunes & App Store on your phone/iPad ?

Cannot update apps downloaded with old Apple ID after changing ID

My wife and I used to share my Apple ID on all mobile devices (iPhone 4S, iPad 2) and Mac so we could share contacts, calendar, purchases (apps & music). My Apple ID was an inactive email address. When I bought my iPhone 6 I decided to change Apple ID to a current email address and she created her own Apple ID for her iPhone 4S and iPad 2. Figured we could still share data through Family Share. Changed Apple IDs on all devices to the current ones.
Now, she cannot update apps on her devices as she gets message that her apps were downloaded with another Apple ID. It asks for password for that Apple ID (my old ID), and the passwords for my previous Apple ID and my new password don't work. I tried deleting the apps off her devices and then installing again from the Mac we backup to, but that did not work.
Also, is there a way to share contacts and calendar through Family Share or some other way. We don't seem to be sharing any longer since making all these changes. Why did I make the changes? Because using the same Apple ID on all devices was causing me to get her text messages and vice versa, and other strange things after updating to iOS 8.
I have iPhone 6, she has 4S and iPad 2. Have a MacBook Pro circa mid-2010 running Yosemite, version 10.10.2. Mobile devices run iOS 8.1.3
obdoc54

It is a good thing you made 2 separate Apple ID.
I tried deleting the apps off her devices and then installing again from the Mac we backup to, but that did not work
It's normal it didn't work because you are reinstalling apps (that are on the Mac) that were purchased/obtained from your Apple ID. She needs to reinstall them through the App Store on her device, using her Apple ID.
share contacts and calendar through Family Share or some other way
Calendars can be shared through iCloud (A)(without Family Sharing), or using the following method (B) used for the contacts.
Contacts can neither be shared through iCloud or through Family Sharing.
To get them synced: Get all of your wife's contact on your iOS device. (you can send them to your iOS device through iMessage)
then go to your wife's iOS device: Settings --> Mail, Contacts, Calendar.
From there, disable her iCloud contacts, then add YOUR iCloud account, and select only contacts (and calendar if you want the method (B)).
This should answer all your questions.
Cheers

Contacts merged with device that shares the same iTunes account as me

My husband and I share the same itunes account on our phones so whenever he downloads something new it downloads on my phone as well and vice-versa.
Just recently, after iOS 6 update, we noticed that his contacts merged with my iPhone & my contacts have merged with his. Also, he is getting notifications from an app that we share... But the notifications are from MY friends on facebook. The app is called voxer and whenever someone (from my Facebook friends) sign up, my husband gets the notification. Which is really weird because im not even signed on to Facebook on his phone. Somehow my information has merged with his phone and his mine. Why is this? Is there a way I can make things back to normal? Thanks in advanced.

Sounds like you may be syncing your contacts to the same iCloud account on both phones if your contacts are merged. You can share the same iTunes account for purchasing apps and music, but to avoid merging data you sync with iCloud you need to set up separate iCloud accounts on each phone.
To do this, first decide which phone will be changing accounts. On this phone that will be changing, go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up a new iCloud account on this phone using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the other person's data from your account (such as deleting your husband's contacts from your account, and vice versa). These changes will be reflected on each phone; when you're finished you will have individual iCloud accounts with just your own data on them.
Don't know anything about your problem with voxer notifications.

HT4539 Everytime i go to download an app on my ipod touch the app begins to download with the words "wating" underneath the app....then after a few seconds the app completely disappears.. i tried to switch wifi networks, i've reset my billing info, i need

Everytime i go to download an App from my Ipod Touch, the app begins to download with the words, "Waiting" underneath it.
....after a few seconds....the App DISAPPEARS!...i've tried turning it on and off, reseting billing information, going to downloads to resume but the app isn't even in the downloads section...I NEED HELP! I WANT TO PLAY TETRIS!!!

https://iforgot.apple.com/appleid
If you forgot your Apple ID password - Apple Support
Contact Apple for help with Apple ID account security
https://ssl.apple.com/emea/support/itunes/contact.html

I accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99

i accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99

Did you install it yourself are somebody else for you?
If you installed them yourself, but do not remember which AppleID you used, try all AppleIDs you might have used in turn.
If somene else set up your Mac for you, ask the person to reinstall it. If you bought the mac second hand, the previous owner needs to contact Apple to transfer the iLife apps. If that is not possible, delete the apps that you cannot update and buy them using your AppleID.

6230i Contact Download with Mercedes SAP

Similar Messages

Maybe you are looking for