6534 card does not output data immediately upon trigger

I am trying to loop to output buffers of data one after another using an external trigger. I am finding that unless I allow a significant amount of extra time (about 3 times the time it takes to output the data) between triggers, the data is output some time after the trigger has ocurred, in a kind of consistent, but unsynchronized to the trigger, manner.
I am using NI-DAQ 6.9.2 and VC++. I can reproduce this on a simpler application (based on the NI example code DOsingleBufPatternGen653x.C) than mine and using a function generator to generate a square wave as the trigger.
I also have DSP and JTAG PCI cards running on this PC. On another system, without the DSP card and program running I do not
see this problem.
Is this a PCI bandwidth issue or memory transfer issue. I am using DMA transfers so I did not think CPU bandwidth should be an issue.
I am really frustrated with this card, it is pretty buggy. Another issue I have is, I need to have a 0 value as the first buffer element or else I get the output going high and remaining high at the end of a buffered output.
What are the system requirements for this card? Does it matter which PCI slot the card is in?
Attachments:
DOsingleBufPatternGen653x.Cpp ‏5 KB
DOTest.dsp ‏5 KB
DOTest.dsw ‏1 KB

David
I think the problem you are seeing is with how the NI 6534 device sets up pattern generation.
PCI bandwidth is a limiting factor in how fast the computer can transfer the data to the device to generate. Because of this, all of the data to be generated is first preloaded onto the onboard memory of the device. This way the pattern can be generated at full speed without having to worry about PCI bus bandwidth limitations during the generation. For example, if you are going to output a 20 MB pattern, all 20 MB will be preloaded onto the device before the generation begins. This will cause a small delay before the pattern generation begins.
This can be disabled however. To do this this in VC++, call Set_DAQ_Device_Info function and set the ND_FIFO_Trans
fer_COUNT to ND_NONE. (In LabVIEW this is done with DIO Parameter VI, setting the Scarabs Preload Enable attribute to OFF.)
When you have done this, it will start generating the data as soon as it starts to trasfer the data across the PCI bus.
Brian

Similar Messages

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Your credit card does not match your bank's records

your credit card does not match your bank's records. appears at purchase in itunes store.
2 months with no solution on this. Nothing has changed with my bank at all. Yet apple was able to bill the same card for my mobile me acct. so the card does in fact work! I emailed and got what I already knew. see below, then my reply.
Dear Eric,
You can change your iTunes Store billing information at any time. When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with MobileMe, iPhoto, Aperture, or the Apple Store online is also updated.
To update your billing address or credit card number, follow these steps:
1) Make sure you're using the latest version of iTunes. It can be downloaded free of charge from the Apple website:
http://www.apple.com/itunes/download
Eric, installing the latest version of iTunes will not affect your library or any items in your account that you haven't downloaded.
2) Click this link: http://phobos.apple.com/accountSummary
iTunes will automatically launch and the sign-in dialog will appear.
3) If you are not already signed in, you will need to enter your iTunes Store account name and password and then click the Account Info button.
4) On your Apple Account Information page, click Edit Payment Information
Make the necessary changes. Your billing address should be exactly the same as the address on your credit card statement and with the United States Postal Service (click "Find a ZIP Code" at http://www.usps.com and follow the onscreen instructions). This is important, because even differences in punctuation, abbreviation, and capitalization can cause payment errors that might prevent you from using the iTunes Store.
5) When all of the information is up to date, click Done.
When you update your billing information, the iTunes Store places an authorization hold on your credit card to verify your account information. You might see this authorization request on your online statement. This is not an actual charge; it is simply a test to confirm that your credit card account is active and has credit available to accommodate transactions.
Authorization requests are automatically removed from your account by your financial institution. The amount of time it takes to remove authorization requests varies by financial institution. If you have any questions about the way your financial institution handles authorization requests, please contact their customer-service department.
Thank you for your time. If you have any other questions or concerns, regarding your iTunes Store account, Eric, please feel free to reply to this email. Have a great day.
Sincerely,
Timothy
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Please Note:I work Sunday 9:00 to 6:00 Tuesday and wednesday 9:00 to 6:00 Friday and Saturday 9:00 to 6:00 Central Standard Time
Thank you for allowing me the opportunity to assist you. You may receive an AppleCare survey email; any feedback you provide would be greatly appreciated.
My reply
I've read the support pages through and through and have gone through all of these steps in the past. Nothing on my end has changed. This card has been used for approx three years now, never to have been edited. As stated... In the midst of all of this difficulty, you were able to bill the same card for my mobile me subscription. Which should technically not gone through due to the supposed billing info not matching my bank's records! So quite simply, my card does work, this is something on your end, not my bank.
And I did however change the type case to match my statement to no avail. This never made a difference in the past, but I tried it regardless.
After attempting things for two months, I am growing tired of trying to spend my money on Apple. I will try one more suggestion if one is available. After that, I have had great success with the amazon store and may have to flip over to them. My time is way too valuable to be troubleshooting a problem I did not create.
any specific help would be appreciated (please do not copy and paste tips from the support pages... been there)
Eric

As a follow up to my last post, I thought I would offer you my customer service experience as I am hoping you can avoiding going through what I've been through and that this will save you some time.
I'm listing the discourse chronologically for your convenience:
Specific request: My credit card or billing information is not accepted
Details:
iTunes says my credit card information does not match my bank information and will not let me make purchases. I have updated my account information and I still cannot make purchases. I get the same message that my card does not match my bank's information- which it does.
Please help.
TrackID: 1--------------
Dear ----------,
Welcome to Apple iTunes Store Customer Support. My name is Snehashish.
I am sorry to hear that you haven't been able to make purchases on the iTunes Store with your credit card. I know this is frustrating, and I will try to provide as much information as I can to help you resolve it.
-----------, upon checking your account I find your credit card will be expired after this month. So you have to change it then. I suggest you to change it now or contact your credit card company as it is declined by iTunes.
The iTunes Store has been unable to verify an authorization from your credit card company. There are several possible reasons for this:
- Your credit card company's servers may have been busy. Trying again later may resolve the issue.
- Your card may not have been activated yet. If so, you will need to activate it.
- You may need to call your credit card company before the authorization is approved.
- You may need to ensure that you correctly located the credit card's security code. To see instructions for locating the security code, choose View My Account from the iTunes Store menu, sign in to your account, click Edit Payment Information, and then click the "What is this?" link next to the Security Code field.
- Your billing name or address does not match the address listed on your credit card statement. Any discrepancy in punctuation, abbreviation, or capitalization can cause errors, which might prevent you from purchasing from the iTunes Store. If you moved, or if your zip code changed recently, ask your credit card company to make sure its records are up to date and match exactly what you are entering as your billing information.
--------, please follow these steps to confirm or update your account information:
1) Go to the My Apple ID site at:
http://appleid.apple.com/
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the left column.
6) Confirm or edit your information.
7) Click "Phone Numbers" on the left. Make sure the area codes and phone numbers are entered correctly in their respective fields.
8) Click Save Changes.
Once your information is updated, try placing an order on the iTunes Store again. If the iTunes Store still cannot obtain an authorization for your card, it means that your billing information is still incorrect, either with your credit card company or with its verification system, which may be handled by another company.
Fortunately, you may be able to make iTunes Store purchases with another payment method. For example, if PayPal accepts your credit card, you can use your PayPal account to buy from the iTunes Store. If you need more information about using PayPal on the iTunes Store, please let me know.
------, I hope this information is helpful. Thank you for your interest; I am pleased that you want to be an iTunes Store customer. Have a great day!
Sincerely,
Snehashish
iTunes Store Customer Support
Thank you for allowing me the opportunity to assist you. You may receive an AppleCare survey email; any feedback you provide would be greatly appreciated.
Follow-Up: 1----------------
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
Snehashish
iTunes Store Customer Support
Greetings Snehashish,
When I wrote my original ticket it was to address the issue of the fact I had already updated my credit card information and I was still receiving the error message of "my credit card not matching my bank information" in iTunes. Giving me instructions on how to update my account information was not helpful because I had already taken that step. So, no, my problem remains unresolved and I am unable to make any purchases in iTunes or update my iPhone.
Luckily, the item I was looking to purchase was available on Amazon digitally so I went ahead and bought it there without any problem whatsoever with my credit card- furthering the mystery and the enigma that is iTunes rejection of my credit card.
Please send the next step to resolve my issue or please forward my ticket to someone who can resolve this for me.
Thank you,
Dear ------------,
Welcome back to Apple iTunes Store Customer Support. This is Snehashish again.
I am glad to hear that your credit card works on another website. Some of our customer resolves this type of issue by removing credit card from their account, buy a free app and then re-add the credit card to account. I suggest you to try that.
---------, please delete the credit card information from your account:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
After you select the "None" option, please attempt to download a free App from iTunes Store. Then sign out from your account and sign in back and re-add your credit card information.
--------, then, please follow these steps to confirm or update your account's information:
1) Go to the My Apple ID site at:
http://appleid.apple.com/
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the left column.
6) Confirm or edit your information.
7) Click "Phone Numbers" on the left. Make sure the area codes and phone numbers are entered correctly in their respective fields.
8) Click Save Changes.
Once your information is updated, try placing an order on the iTunes Store again.
If you have further questions or concerns, please feel free to contact me again. Have a nice day, ----------!
Hello again Snehashish,
My address is confirmed and matches my bank account. I followed the steps as you directed with deleting my information downloading the free application and then re-entering my payment information. I continue get the error message that my credit card information does not match my bank's records. I have as of today called the bank and confirmed twice that my banking address is correct. The error is not happening on the banking side of the equation.
Please send the next step to resolve my issue or please forward my ticket to someone who can resolve this for me.
Thank you very much,
Dear -------,
Welcome back to Apple iTunes Store Customer Support. This is Snehashish again.
Thank you for your response. Upon reviewing your account I find you removed that credit card successfully. I suggest you to update that information to start purchasing. You can also use gift card as well.
--------, you can change your iTunes Store billing information at any time. When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with MobileMe, iPhoto, Aperture, or the Apple Store online is also updated.
To update your billing address or credit card number, follow these steps:
1) Make sure you're using the latest version of iTunes. It can be downloaded free of charge from the Apple website:
http://www.apple.com/itunes/download
Note: Installing the latest version of iTunes will not affect your library or any items in your account that you haven't downloaded.
2) Click this link: <link to launch itunes>
iTunes will automatically launch and the sign-in dialog will appear.
3) If you are not already signed in, you will need to enter your iTunes Store account name and password and then click the Account Info button.
4) On your Apple Account Information page, click Edit Payment Information
Make the necessary changes. Your billing address should be exactly the same as the address on your credit card statement and with the United States Postal Service (click "Find a ZIP Code" at http://www.usps.com and follow the onscreen instructions). This is important, because even differences in punctuation, abbreviation, and capitalization can cause payment errors that might prevent you from using the iTunes Store.
5) When all of the information is up to date, click Done.
When you update your billing information, the iTunes Store places an authorization hold on your credit card to verify your account information. You might see this authorization request on your online statement. This is not an actual charge; it is simply a test to confirm that your credit card account is active and has credit available to accommodate transactions.
Authorization requests are automatically removed from your account by your financial institution. The amount of time it takes to remove authorization requests varies by financial institution. If you have any questions about the way your financial institution handles authorization requests, please contact their customer-service department.
---------, if you have further questions or concerns, please feel free to contact me again. Have a nice day!
Despite already having the current version of iTunes, I re-downloaded the program and installed it on my computer. I logged into the link you sent me. I entered in my banking (again and without mistake) information exactly as it is on my billing information. I have now entered my credit card information correctly on iTunes repeatedly- it has not deviated nor changed and there has never been a mistake in my data entry. I have used this credit card at other locations and online stores without error and my banking and credit card information is correct.
I entered a credit card I DO NOT want to use in conjunction with my iTunes account and it was accepted without incident or error message. The problem is that the card I do want to use, that I NEED to use to make purchases on iTunes is not accepted. Both cards are issued through the same bank- one is debit and one is credit and they both link to the same bank account with the same home address. The debit card is being rejected and the credit card is accepted. My problem is not my address nor the account number as both have been entered correctly multiple times. iTunes is rejecting my particular card even though it is working and matches my bank information. This is the card I have always used to make purchases on iTunes and this error started when my old card expired and I attempted to update my account.
Every time I re-enter my credit card and try to make a purchase and I always get the following message:
"There are errors or omissions in the information. Please correct the indicated items: Your credit card does not match your bank's records. Please enter a US credit card and a matching billing address."
I have reset, re-downloaded, and re-entered everything on my end multiple times resulting in the same error from iTunes. I want to know what is happening with my account. If you do not have a solution then please escalate this ticket and please put me in contact with someone who can help me.
Thank you for your time,
I found my solution in the Apple Support Community. It had nothing to do with my information being incorrect. I do not require your assistance any longer.
My issue resolution was actual very simple and came from this page. iTunes has a bug where it will not accept your information but if you add your credit card under you account in the Apple Store and CONFIRM then it will appear in your iTunes account automatically. I could have saved hours of email, calls to the bank and stupid angst if I had looked this up instead of TRYING to use Apple Customer Support. I've learned my lesson. I just want you to know that iTunes is bugged and broken in this respect and no matter how many times you enter your information IT DOESN'T WORK. I hope this helps someone else.
Apple please tell your customer support people how to actually help instead of having them paste in worthless form letters on how to use a credit card with iTunes. Obviously it iTunes that is broken.
PLEASE FIX.

Server Socket does not read data input stream

Hi all,
I am very newbie to Java Network programming with sockets and multi-threading.
But I am obliged to develop a chat system written in Applets which can be placed on the website and used by visitors who come to my website.
In order to understand this, I have tested a basic web chat program I downloaded from the Internet which use sockets and multi-threadings. The program work fine, no bugs at all at both compilation and run time. I noticed that all three streams for Client side (i.e. first one is input stream used receiving data from User; the second one is socket input stream used for receiving data from Server socket, and the third is socket output stream used for writing data to server socket) were established. And the same, two socket streams (input & output) for Server side were also connected when running program giving right port number and IP address of the server.
The problem is both server and client sockets do not read data using the following stream classes:
1. DataStreamInput: I use input.readUTF() method
2. or BufferedReader: I use input.readLine() method
The example of the codes are below:
private BufferedReader input = null;
private PrintWriter output = null;
private Socket socket = null;
public void open() throws IOException
{ input = new BufferedReader(new
InputStreamReader(socket.getInputStream()));
System.out.println("Server socket input stream was created, and");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Server socket output stream was created");
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
System.out.println("Server is reading data from Client, wait...");
String fromClient = input.readLine();
System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
The problem is at the line: String fromClient = input.readLine(); in the run() method? What is wrong with the codes above?
Note: I also try to use original codes which use readUTF() method in DataStreamInput class instead using readLine() in BufferedReader. Both methods dont read data from inputstream socket?
I very appreciate any help/advice from experienced developers.
Best regards

Hi,
Yes. The readLine() method hangs! After the test, the execuation of the program is stopped at the line of readLine() method; it does not pass it?
There is no problem with writing to Server socket. After the test, the program pass through flush() method. Here is the code for writing to sever socket within ChatClient (client side socket) class:
private BufferedReader input = null;
private PrintWriter           output = null;
public ChatClient(String serverName, int serverPort)
{ System.out.println("Establishing connection. Please wait ...");
try
{ socket = new Socket(serverName, serverPort);
System.out.println("Connected: " + socket);
start();
catch(UnknownHostException uhe)
{ System.out.println("Host unknown: " + uhe.getMessage()); }
catch(IOException ioe)
{ System.out.println("Unexpected exception: " + ioe.getMessage()); }
public void start() throws IOException
{ input   = new BufferedReader (new
                         InputStreamReader(System.in));
System.out.println("Client User input stream was created,");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Client Socket output stream was established, and");
if (thread == null)
{ client = new ChatClientThread(this, socket);
thread = new Thread(this);
thread.start();
public void run()
     while (thread != null) {
     String fromUser;
          try{
               while((fromUser = input.readLine())!= null)
               System.out.println("Client wasreading a data from User, and");
output.println(fromUser);
     output.flush();
     System.out.println("Client has written a data to Server");
catch(IOException ioe)
{ System.out.println("Sending to server error: " + ioe.getMessage());
stop();
etc.
Here is a piece of codes for reading data from the Client Socket in the ChatServer Class (Server Side socket):
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
{ //server.handle(clientPort, input.readLine());
System.out.println("Server is reading data from Client, wait...");
String fromUser = input.readLine();
//while((fromUser = input.readLine()) != null)
     System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
etc. Please advice why the readLine() method hangs; does not read data from the input stream received from the CLIENT?

Software problem? Installed graphics card does not meet minimum requirements

Ok - I seem to have just met the same problem that others have experienced. MB Pro, less than 3 years old, graphics card NVIDIA GeForce 9400M 256MB. I have been using Aperture up until about 1/2 hour ago with no problem. Just now trying to sync my iPad, and Aperture (which launches automatically) responds with "installed graphics card does not meet minimum requirements". All software is fully up to date, running latest versions of all Apple software. What is going on please? I have restarted several times, tried Command/Option/P/R on restarting, but nothing seems to make it work.

You might try to reboot again, this time with the Shift-key hold down to boot into safe mode. This will clear some caches and reset the graphics card. Aperture will not run in safe mode. You will have to reboot a second time.
Do you use an external Monitor? Then disconnect it, before rebooting.
Regards
Léonie
P.S: Do you use a blue tooth keyboard? If you turn it on while booting, you may accidentally boot into Safe mode without noticing it, and then Aperture will give exactly the above error message.

The information on my sim card does not transfer when i run isync

macbook Mac OS X (10.4.9) The information on my sim card does not transfer when i run isync everthig else works fine . i have a nokia 6103

Welcome to Apple Discussions.
There's nothing unusual about that, as the SIM standard is not written to support external data exchanges. In order to synchronize your SIM-stored data, you must first copy or move each contact record into the memory location on your device reserved for contact records not stored on the SIM.

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>

Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

My maestro debit is not working in Itunes as it is asking for an issue number but my card does not have one.

I try to purchase a free app on the app store and it asks for my password. I put my password in and it asks me to change my billing info. I put in all the correct info but it asks for a issue number but my card does not have one so i can't purchase anything even if it's free.

Andy ...
If you are going to use a debit card it you must enter a security code.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

6534 card does not output data immediatel​y upon trigger

Similar Messages

Maybe you are looking for

6534 card does not output data immediately upon trigger