6600 Slide not showing correct time for recieved m...

Hi again, My slide is mighty cute but is vexing me once more. Whenever I recieve messages - if i look at the "message details" it says i have recieved them at bizzare times. Eg. if it is 1pm it might say 4:36 am. Have called my service provider - they said it was a phone setting. Checked at the shop i purchased it from and they cound't figure it - i have searched and still can't figure it! anyone have any clues as to how i would go about setting it for the correct time? When I send messages it sticks the right time on them and my phone clock is correct too ...
thanks in advance!

Hi.
Go to:
settings,
date & time,
date & time settings,
then go to TIME ZONE(set your GMT, that's the local time zone. Eg: Mine is GMT +8, Its because I live in asia so its GMT +8. It depends in what country you are located. If you dont know your GMT or local time zone, just google it, type GMT & look for the country where you live.
Then, set the actual time & date.
I also have that kind of problem before & I did the same thing.
Hope this will help...

Similar Messages

Balance Sheet not showing correct sign for Liability and Equity

Hai,
I am using SAP PL 40,
In SAP Balance sheet Report,
Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
In my Liability Ledger the value is
INR-10000.
In Balance sheet it showing
INR1000.
And also, is it possible to bring Dr and Cr column in Balance Sheet?
Now, it's coming in single Column.
Please help me out.
Regards,
Thanga Raj.K
09710445987

Hi
It's the system definition that under Standard Balance Sheet Report, the
Liabilities are displayed with POSITIVE SIGN although we know that the
balance for those liabilities accounts are negative. The reason for it
is that the liabilities accounts are defined as Passive Account, so when
the balance is negative, it's displayed with positive sign. And when
the balance is positive, it is displayed with negative sign. The
definition is mainly for the purpose of the reporting. In most of the
localizations, the financial reports supplied by the business should
display Liability and Equity with positive sign.
If you really want to display them in negative sign , you can define a
customized report template in Financials->Financial Report Templates->
and select all liabilities and tick the box in front of 'Reversal Sign'.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 22, 2008 8:49 AM

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

My iphone 4 is not showing correct time! its just showing time for UK all the time. please help!!!!

i tried all possible way, but couldnt get it right....

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Clock not showing correct time in Mac OsX 10.8.2

Recently I noticed that the clock (in the menu line) has stopped updating as time goes by. If I click on it, it updates to the current time but remains on that time until I click on it again.
Any others that has noticed this?
I don't think that I have installed or upgraded any programs recently either, so I suspect that it is a system malfunction...
Morten Masch, Norway.

If you look at the "More Like This" box, you aren't the only one that is experiencing clock problems. If what I suggest doesn't work, if you monitor the "More Like This" box, other threads appear. Opening them usually displays other threads.
Some have been able to reset their clocks by:
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964

Times of posts not showing correctly for my time zone

The times of posts not showing correctly for my time zone ( I am in London UK).
How do I fix this?
TIA

Your stuff>profile>edit preferences
Barry

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

I am using 4s with ios7.1.2 my phone not showing correct location service. in map its shows my incorrect location most of time

i am using latest updated ios. i am facing problem with my location service from many days. like in map its 90% times shows me
some where else and if i some applications there also my location not showing some times in day example 2-3 time just show my
location. i already reset my location setting, did reset all setting even restore my phone also but still has this problem. please solve
this.

Hello there, pradeep77.
The following Knowledge Base article offers up some additional information for understanding and troubleshooting location services on your iOS device:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Also make sure that the features you are trying to make use of in Maps are available where you are located:
iOS7 Feature Availability
https://www.apple.com/ios/feature-availability/
Additionally, in regards to the other applications, this article provides indispensable information in regards to troubleshooting those:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Account Balance not showing correctly

Sir,
Suppose , i have posted an invoice of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So, accout balance of this customer should be zero.. But when i see the account balance from business partner master data , it should me Rs.-400 in accout balance field but when i navigate through orange arrow in to accoutn balance details , there i get zero in balance due field?? ie. it is showing coorectly in details of account ballance but in the business partner master data it is not showing correctly??

hi divya,
Check SAP Note 904002 - Customer account balance is displayed with negative sign
Summary
Symptom
Customer Balance is displayed with minus.
Other terms
Customer balance, Supplier Balance, Credit Balance, Debit Balance, Display Credit Balance with Negative Sign, Company Details, System Initialisation, business partner, accounts, SAP Business One
Reason and Prerequisites
Customer balance is displayed in negative though you expect it to be positive.
Solution
Under Administration->System Initialisation->Company Details and the 'Basic Initialisation' tab you will find the setting 'Display Credit Balance with Negative Sign'. This setting decides how Customer and Supplier balances will be displayed.
NOTE!
When creating a company it is important to know that this setting is irreversible once transactions have been made in the company.
When this box IS checked the following applies:
Customer balances will be displayed as Positive.
Supplier balances will be displayed as Negative.
When this box IS NOT checked the following applies:
Customer balances will be displayed as Negative.
Supplier balances will be displayed as Positive.
This setting also influences the entry of opening balances for the G/L accounts. Depending on this setting, the opening balances must be entered as positive or negative numbers.
By default this box is checked when a new company is created.
Header Data
Release Status: Released for Customer
Released on: 02.12.2005 10:42:10
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SBO-ADM-INI-DET Company Details
Secondary Components: SBO-BP Business Partners
Affected Releases
Release-Independent
Hope it solves problem.
Jeyakanthan

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Fonts not showing correctly only when on my account page on app store

fonts not showing correctly only when on my account page on app store

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

How do I report a video not showing correctly?

I tried to find a Contact Us to "Report an issue" but ended up chasing my tail.
This video is not showing correctly in the frameset during preview.
http://itunes.apple.com/us/music-video/medley-surfer-girl-wouldnt/id504074645
at least ... not for when whenever I tried to watch it.

Most every product Mozilla has is from say a mozilla.org site link.
https://mozillalabs.com/en-US/projects/
https://www.mozilla.org/en-US/products/
The only real video related thing Mozilla has is https://wiki.mozilla.org/Shumway and more info at http://mozilla.github.io/shumway/
The site you downloaded this NewVideoPlayerSetup.exe from was a scam as it uses the inexperience of users and popularity of Mozilla and the Firefox browser to trick people into installing stuff like this.
Next time if you are uncertain you should ask as somebody will then tell you if it is legitimate or not for example.

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Ical events not displaying correct time zone

Hi All,
I have a weird issue and I'm not sure if it's an iCal or an entourage problem. When one of our Entourage2008 (exchange) users sends a meeting invite to a user in a different time zone using ical, the meeting shows in ical as the time the entourage user who created it, aka not adjusting for the time zone. Entourage to outlook calendar or another entourage calendar works fine, and iCal to iCal works fine; just not Entourage to iCal. Also, a calendar event from the iCal user to the Entourage user does adjust correctly for the time zone difference, which is why i'm exactly sure where the problem lies. I did post in the mactopia forums too so please don't yell at me for posting an 'entourage' problem in a mac forum. any help anyone could provide would be appreciated.
Thank you.
i'm on 10.5.7 with the latest updates for mac os x and the latest office for mac updates, and we are running off a hosted exchange server. we've experienced the same issue whether we have iCalis ("turn on time support") option enabled in iCal or not enabled.

It's annoying as it should not be this complicated. I've implemented a work around, but it's not ideal. I have entourage running but not open, and have sync services set to sync with ical. A new invite comes into mac mail, the user clicks on the ics file (which opens entourage calendar), accepts the meeting, and closes the entourage window. The correct time is in entourage calendar, and then syncs with ical and the meeting has the correct time for that time zone.
If anyone has found a real fix for this problem, please let me know.
Thanks for letting me know I'm not the only one Jim.
Slater

MiniDV Video in Affert Effects not showing correct ratio.

I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?

If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later.

6600 Slide not showing correct time for recieved m...

Similar Messages

Maybe you are looking for