7410 All In One will not connect

I have a 7410 All In One.  It's about 3 years old.  Within the last 6 months it has been manifesting an ongoing problem.  When not in use for a period of time, it will simply stop functioning.  Upon disconnecting-reconnecting the power cord, the center screen will illuminate and a white bar across the bottom will appear suggesting it is connecting, but the "On" light will not come on.   According the hp site the drivers are up to date.  
Another oddity is that when it is in this condition, it will suddenly come back to life.  This has happened a couple of times after anywhere from 6 to 12 hours.  Unfortunately, it is in this mode now and there are documents that have to be printed.
It has never scanned properly, either, so the All In One functionality is pretty much nil.
Does anyone have any thoughts on this?
Thanks,
WS 

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • HT2292 I recently got a new ipod touch and the new one will not connect to itunes.  I've done all the troubleshooting and now I'm just plain frustrated.  With the new update my old ipod froze and best buy gave me a new one. What to do?

    My ipod recenly froze with the last update.  bestbuy gave me a replacement.  the new one will not connect to the computer or itunes.  i followed all the instructions and - nothing.  It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes.  i don't get it.  i'm not a supertech so i don't know what to do. help!!!!!!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hi All, My MacBook will not connect to the internet at my apartment.

    Hi All, My MacBook will not connect to the internet at my apartment. I live with 5 other people and it works for all of them. It worked for me until about 3 weeks ago. My internet works fine at other places like cafes or other folks' homes.  I've tried many things but am having no luck at all. If anyone has any suggestions, I would love to hear them!  Thanks!

    Some routers (such as my Netgear) seem to work better if you input your device's MAC address manually while on their online site. That site address should be in the manual and usually starts with something like 192.168.x.x Once on that site, input your Mac's address - a series of numbers and letters i.e. 2f.3c.45.2a.xx.xx (go to Network Preference Pane, select Airport, click on Options: at the bottom it shows "airport ID". I have all my devices listed; with that you can create a special IP address i.e.192.168.1.1, .2, .3, and so on. I've never lost connection using that method.

  • 6500 all in one wireless not connecting to computers on network.

    My 6500 all in one never has connection to all of my computers that are on-line at the same time.  Right now, even the main computer that is hardwired to my wireless router has no connection.  Only one connected is one of the wireless computer connections. I have Windows XP

    Generally, setting a static IP can help tremendously with stablizing network connections.  Sometimes, a router will change the printer's IP address too frequently creating an unstable connection.  Even if the router does not change it frequently, setting a static IP still helps.
    I have attached a video that should help a lot more than me providing the steps.  The video uses Windows XP with an OfficeJet 8500A, but the printer steps in the EWS (embedded web server) should be the same.
    This will require a PC that is able to communicate with the printer, which it sounds like you do have at least one that can.  Perform the steps in the video on that computer.
    To print a network configuration page, like they show in the video, go to Setup> Network Setup>Print network Configuration page.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Officejet 8600 all-in-one will not allow me to use features

    ALCON - after installing Yosemite (well upgrading) my all-in-one is not functioning. I have gone to HP's website to no avail nothing that can help. I uninstalled the software restarted my computer and restarted the printer. Updated the firmware on printer yet nothing is working correctly. I cannot scan documents nor fax. I get a message from the printer saying that the printer cannot communicate with the computer. I also have the HP assistant installed on my mac and yet still the computer cannot communicate with the printer's scanner and vice versa. I am at a loss. Any feedback would be appreciated. I really need to scan some documents and get them sent out. I had to go to my PC as a last resort. Suggestions please?

    I may have found a fix for this problem. For those who are using Mavericks or Yosemite: Uninstall the current printer driver and install the printer driver dated Oct 22, 2014 and then install a patch update. I will copy and paste the link. For some odd reason the drivers I had prior to upgrading the OS was not willing (I upgraded from Mountain Lion).
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4182&lc=en&cc=us&dlc=en&s w_lang=&product=4323648#N191

  • After move, all-in-one will not print or connect

    My All-In-One was working fine before we moved.  Now, it says it isn't connected to the computer. I have tried connecting via ethernet and USB as well as wirelessly.  I have downloaded the HP doctor, new drivers, and I am at my wits end.  Really need the printer capability!  Copy and fax are working fine.

    Hello @momof3cs,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the communication issue you're experiencing when attempting to print from your Windows 7 computer to your HP Officejet Pro L7580 All-in-One Printer. Now, with a new location comes a new setup of your printer. If your printer was previously configured over your network you will need to reconfigure the network settings on your product to re-establish that communication. Please follow the steps below to correct this connection issue.
    If you have a USB Cable attached to your printer, please disconnect that now. 
    If you have an Ethernet Cable attached to your printer, please disconnect that as well.
    Step 1: Restore Printer:
    For troubleshooting purposes, it is important to have a nice clean slate to work with. Therefore, I am going to have you restore any network settings on your printer.
    Select the Setup button on the front panel of your printer
    Right arrow to Tools and select OK
    Right arrow to Restore Factory Defaults and select OK
    Once the Restore is complete, please proceed to the next step.
    Step 2: Uninstall Drivers:
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Follow the onscreen instructions to complete the uninstall.
    Step 3: Install Drivers:
    If you want to use the printer over an Ethernet connection, please plug the ethernet cable in from the rear of your  printer directly into your router
    Next, click here to download the drivers for your printer
    Once the website opens select the Download button on the top left
    If prompted, please allow the download to Run
    Once the download is complete, please follow the onscreen instructions to install your network printer
    Once the installation is complete, please test your machine to ensure that everything is functioning.
    If you also want your printer installed with a USB Cable, please follow the steps below.
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select 'Connect a Device' or 'Add a Device'
    Choose that you want  to install for USB
    Only plug in the USB Cable when the installer prompts you to
    Once this install is complete, please test printing to ensure everything is working.
    If you want your network printer to be the default printer you will need to go to your Start menu, click on Devices and Printers, right click on your network Officejet and select Set as Default Printer.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

    Upgraded to Windows 8.1 on Pavilion g6.  Officejet 4500 Wireless all-in-one still prints but won't scan.  Downloaded full feature driver.  Installation quit giving error message 'file cannot be found'.  Tried 'chat' sessions with no resolution
    This question was solved.
    View Solution.

    Hello bob5e,
    I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
    1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
    2. If that does not work, please try this next troubleshooting document step by step.
    Installation issues - The Progress Bar on the Software Installation Stops or Stalls
    I hope this helps!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP C6150 All-In-One Will Not Print Black Text But Does Partial Test Print

    Hi.  Thanks in advance for any help anyone can proffer.
    I've read through the forum and I think there are some similar issues, but none exactly the same as ours.
    This HP C6150 does print pictures, but suddenly stopped printing black text.
    HOWEVER, the test prints will print in black with the Windows Logo, but will not print any associated text.
    Odd.  It just suddenly stopped printing.
    Variables:
    C6150 All in One - No other problems for two years.
    Using refilled ink cartridges from outside source. (not my decision)
    Ink is full.  No other changes made in last three days.
    Troubleshooting Steps:
    Uninstalled and then re-installed software in entirety.
    Put in 'new' (refilled) cartridge for black and magenta.
    Tried (not sure if successful) soft reset.
    Tried cleaning the print cartridge with 'Q-Tip' and distilled water.
    Have not yet spent money on new OEM print cartridges.  That is next step unless other suggestions merit.
    Possibilities:
    It may be the refilled cartridges, but they've worked so well in the past.
    The cartridge prior to the recent replacement was working fine and was not yet out of ink.
    The print head might be damaged.  But this should/would affect all black printing and this is not the case.
    Were the driver corrupt, the reinstall should have fixed it ... you'd think.
    So, we're looking for some suggestions prior to going out and getting a new printer.
    Thanks again, in advance, for constructive non-judgmental suggestions.
    MackNC

    The likely cause is the black ink is not printing at all.  When printing graphics (like the Windows Test Page) black is made from mixing the color ink.  I would suggest printing an internal diagnostic test page as shown in this page.  Does the black block print?  If not then clean the printheads as described here.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

    HP Officejet Pro L7780 All-in-One -
    Issue:
    Blue ink will not print (It prints the color pink instead.).
    Actions taken:
    1.  Cleaned ink heads.
    2.  Replaced ink cartrige.
    3.  Reinstalled software.
    Sugestions by HP customer service:
    Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
    Any suggestions or advice would be very much appreciated.
    Thank you for your time!
    Thank you.
    Sincerely,
    Ryan

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Office Jet J6480 All In One - will not scan with Mac OS 10.8 .3

    I have been unable to get my HP Office Jet J6480 All In One to scan after upgrading to 10.8.3.I have followed other posts and have installed the most up to date driver (http://support.apple.com/kb/DL907) but each time i try to scan from the HP device manager or the photosmart studio, it says "Sorry, scanner could not be intialized. (scanner not found)"  I have tried making sure there are no other updates by clicking on settings in the device manager and clicking check for updates but it tells me "server not availalbe - the software service is currently not available. please try again later" and i have gotten this error for the last week.
    I followed the second set of instructions found here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve that issue and have installed the software found at the link. I rebooted my computer and am still having the same problem.
    Note: My printer is wireless and i have not hooked it up via a cord. Will that make a difference?
    My printer seems to be printing fine.
    Thank you for any help you can provide.
    Sara
    This question was solved.
    View Solution.

    Try scanning from your Mac.  Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom.  Along the right side you will see LOTS of options for scanning and saving.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 7520 all in one will not print photos from photo tray from computer

    7520 all in one printer photodmart will not print photos from computer from the photo tray

    Hi,
    By default it picks main tray, you have to tell it to pick papers from photo tray:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • 8500e all in one WILL NOT ALLOW sprint anymore

    This used to work, but now nothing works.  
    Mac OSX 10.9.2 on the main computer.  The printer connects fine to the wireless network.  All machines on the network, wired, or wireless, can print to the machine.  None of the ios devices can see the printer.
    I have  removed and reinstalled.  Checked firmware update, reviewed seetings on the HP eprint web site.  Nothing in any related posts works.
    There is something which simply does not work.  All of the other posts go thru the same simple setup instructions that DO NOT WORK.  
    Does anyone have another idea how to force this to work?
    I also downloaded the hpeprint app on my iphone 4s.  I am not even sure what it does.  I don't want to have to email every **bleep** thing i want to print from an ios device when the very simple "print" is supposed to (AND UNTIL RECENTLY DID) work.

    Hi Jvarner,
    Welcome to the HP Support forums.  I gather that you are getting a “No AirPrint printers found” message on your iOs devices when trying to print to your Officejet Pro 8500A printer.  
    There is a sub-section titled “What if a 'No AirPrint Printers Found' message displays on my Apple device?” in the How to Use Apple's AirPrint Over a Wireless Network document.  Please follow the steps for Solution One: Restart all devices and check network connections.
    If that doesn’t resolve the situation, have there been any changes to your network recently (new router, new internet service provider, router firmware updated, changed password on network, etc)? 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Windows 7 64 bit, changed wireless modem, now c4500 all in one will not print.

    I had to have my wireless modem changed and now my 2 laptops will not print. 1). windows 7 64 bit.  2) windows xp, version 2002 service pack 3. The new wireless modem is from ATT u-verse 2wire892. I tried reinstalling on the windows 7 laptop and it tells me can't be installed on that operating system. I had it there before. I ran a Wireless Network Test Report and under the network name it still has the old net name not the new one, how do I change that?

    Found diagnostic utility at hp support.  Though I lost all jobs in the queue, printer is again working.  YEAH!

  • Apps on new all-in-one will not run

    1. Installed Office
    2. Got error about bootstrap, suggested recovery
    3. Performed recovery and reinstalled office.
    4. Office works, bu none of the apps (on start page) will run.
    5. They oook like they start, but the screen will not show app.
    6. Only day 2 on new computer, already have HP problems.

    Hello @whkendri,
    I understand that you are having issues with APPS opening on your brand new 2 day old HP 21-2024 All-in-One Desktop PC even after doing a recovery. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. With any issue on one of our brand new computer you should consult our Technical Support as you want to ensure that you have a properly functioning unit and that ANY issue you have is properly documented.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for