8.2 updated on iPad2 and my air printer not available. Pse help.
MY iPad2 updated to 8.2. I am unable to air print from my Numbers spreadsheets since update. There were no problems before update. Pse pse help.
Hi Gymtime,
You are in the Numbers for Mac forum. I don't think we have the expertise you need.
Maybe Using iPad ? I would try the AirPrint threads.
Good luck!
quinn
Similar Messages
-
Bootcamp update 3.1 and 3.2 will not install please help
I am running windows 7 32 bit on a silver mac book pro. it wants me to update my boot camp version from 3.0 to 3.1 but when i go to download it, it comes up with a progress box but then after a while it gives me an error basically stating that if this problem persists try just downloading it and installing it manually well i have done both ways even downloaded it form the apple website to which no avail. when i go to run the standalone updater it give me the error " the application was unable to start correctly (0xc0000005) click OK to close the application" i have tried running it as an administrator, and using the compatibility mode tried it with xpsp2,3 and vista sp2,3.. please help me as i am not the only one having this problem in my department
I donno if this is much help, but here goes.
This was my problem: When I upgrade boot camp from 3.1 to 3.2 using the apple update software (online, and on my windows 7 64bit) It didn't upgrade. I did the restart and everything went smoothly, but it just didn't upgrade.
Then I went on to apple boot camp software site to download the software to upgrade manually, then It says I need to locate bootcamp64.msi or something close to that.. I couldn't locate it on my hard-drive... so failure there
Turns out that file is on the MacBook Pro Mac OS X install DVD, under boot camp - apple
direct the location there and click on the bootcamp64 thing, and it should work (If you have the same problem as me) -
Why is app store and itunes unavailable?
As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/ -
I downloaded a movie to my Air, but it won't sync to my ipad2 and says it's not authorized. It's not a rental. Anyone else have this problem or know how to resolve?
I ended up having a one hour conversation with Apple Support which evolved to handing over control of my screen and then eventually having to use Terminal. I wish I could remember the command but it's probably best I don't.
One thing we looked at right away was the account name used to dowload the movie. Is it the same as the account name you have saved on your iPad. That's easy to check and would be great if that is all that's needed to correct. Good luck.
Here's also an email I got from Support that could solve your problem if it's not as difficult as my issue was.
I would like to inform you that this issue can occur if iOS (your device's operating system) on your device needs to be updated. It can also happen if the computer you're trying to sync from has not been authorized to play purchases you are trying to sync.
I suggest that you first see if updating iOS on your iPad resolves the issue. This article will walk you through the process:
Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
http://support.apple.com/kb/HT1414
If there are still purchases that won't sync to your device after you update its software, I suggest reauthorizing your computer. To do so, follow these steps:
1) Open iTunes.
2) From the Store pull-down menu at the top, choose Deauthorize Computer.
3) Enter your account name and password, then click Deauthorize.
4) Now from the Store pull-down menu at the top, choose Authorize Computer.
5) Enter your account name and password, then click Authorize.
Once your computer has been authorized, try syncing your device again. If the same issue happens, I suggest reviewing the following articles:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Syncing iPad, iPhone, or iPod touch with iTunes
http://support.apple.com/kb/HT1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
You'll also find a wide variety of helpful iPad troubleshooting tips, tutorials, and service information on this page:
http://www.apple.com/support/ipad -
Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect. No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection What's up?
I am curious if possibly the hotel has some sort of VOIP block on. Have you tried Skype? Did you talk to the hotel staff? My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue. He has had no problems from Istanbul but he is staying in a corporate apartment there. If you find an answer please post back. Thanks
-
I was updating my Ipad2 and when it was done it went to the apple logo and wont leave that screen it also will not charge. Ive tried resetting and it turns off for a second then come right back to the Apple screen.
Try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
Connect the iPad to your computer's iTunes. You have to restore your iPad now.
iTunes: Restoring iOS software
Read the kb article all the way to the end. You may need to use recovery mode. -
Ever since I updated my ipad2 and iphone5 to ios8, both devices are running slow, apps take forever to download (Google is STILL downloading on both), and they freeze/crash. This is VERY frustrating! Anyone else having the same problems?
Message was edited by: RkksheaHad same problem on my iPad2 with the original 8.0 release. I ended up wiping it completely clean and doing a reset and restore from backup. That seemed to fix my issues. I had the same problem when 7 came out and did the same wipe and restore to get everything working well.
-
I just update my ipad2 and iphone4 to ios6 but now
My two device bluetooth cannot connect with any other
Ios device.Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?
Hi,
If you are trying to utilize AirPrint you need an HP compatible printer listed here.
http://www.apple.com/ipad/features/airprint.html
Scroll down.
Carolyn -
i phones updated iso 8.01 all three phones will not connect to service provider and touch id
will not work APPLE HELP !!!!!!!!!
anyone know i fix as i have spent over 2000 pound on three phones that won't work
all three where working fine until the 8.01 updateApple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
Update:
Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch. -
Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again ! -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.
Welcome to Apple Support Communities
First, when you are going to turn off or restart your Mac, you will see a box called "Reopen windows when logging back in" in the shutdown or restart window. Untick this box and see if the App Store opens automatically in the next startup.
If it starts, open System Preferences > Users and Groups > Login Items, and see if the App Store shows up. If so, remove it from this list -
I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!
You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing!
Maybe you are looking for
-
My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?
My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?
-
How to display report vertically
Hi. I want to display a report vertically. I mean heading of the report should come vertical and its records should also come vertical. I am using alv. Please help me.
-
Help - Deploy OpenCms 8.5 to WebLogic 10.3.5 failed
I am trying deploy OpenCms 8.5 to WebLogic 10.3.5 but got many errors. This is the error from console starting WebLogic INFO: WSSERVLET12: JAX-WS context listener initializing 11-10-2012 18:06:08 com.sun.xml.ws.transport.http.servlet.WSServletContext
-
Same skype number calling at 2-3 people.
Hi there, I have a small business, and we are at the point where we will have 2-3 staff available, and I am trying to work out how best to do this. I want the phone to ring at 2 or 3 different skype locations, and if no one answers, then it redirects
-
Change from Internal to External Number range for customer account group
Hi, We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the i