871 Switchport Configuration for Phone and Data

I am having a problem connecting my 7960 to a switchport of my
871 (12.3(14) Advanced IP Services). When configured as shown, the phone is correctly placed into vlan 3, but
a PC plugged into the phone does not end up into vlan 800, but rather vlan 1.
interface FastEthernet1
switchport access vlan 800
switchport mode trunk
switchport voice vlan 3
switchport priority extend trust
If I remove the switchport mode trunk, the phone ends up in VLAN 800.
What is the proper configuration on this 871 to have the phone in vlan 3, and
the PC plugged into the phone in vlan 800?
Thanks.

Hi,
The only thing you need to change is to add the command "switchport trunk native vlan 800"
The reason the PC is showing up in vlan 1 is because that is the default native vlan for the trunk, and thus is the only vlan that is untagged. Since the PC doesn't understand dot1q tagging, its DHCP requests will wind up being received in vlan1 on the switch. Once you change the native vlan to 800, the PC should correctly connect in vlan 800.
HTH,
Bobby

Similar Messages

I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

Just to explain what I just wrote to Laundry Bleach:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

Loss of Phone and Data Connection

I have lost all phone and data connection with AT&T on my iPhone 3Gs. Yet my wife's non-Apple phone has fine connection.
Is this a iOS4 problem?
AT&T said they reboot my phone remotely, but that did not help.
Any suggestions? Other than buy an Android.

I'm having the exact same problem. It just started happening over the last 3 days but it worked fine before that. I upgraded to ios4 the day it came out but didn't start experiencing these problems until 3 days ago. I'm in Canada on the Bell network.
If it turn the off and on again it will work for a little while but then I will lose service again sometimes a few minutes later and sometimes a few hours later.
I've tried shutting it down and starting it and rebooting it and nothing has fixed this.
Anyone have any ideas?
Thanks
Dave

I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
The things that you can check are:
1) Launch iTunes manually
2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
4) Reboot your computer
5) As a last resort, take it to the Apple Store so they can check the hardware

Measure Formulae for Uploadable and Data collection report

Hi,
I have query related to application of measure Formula for Uploadable and Data collection report.
Consider a scenario where i use a MDX query to create a data collection report and I map these columns from these reports to an rowsource using a loader file. Can I use measure formula feature like onchange to work with Uploadable and Data colection reports such that changes to any one column should take effect in another column.
Regrads,
Wesley

Wesley,
IOP uploadable reports are used for sending data to the server in batch. They are coupled to the IOP model via a rowsource. You have a lot of flexibility with the spreadsheet you build for staging the upload. It's really just a function of how crafty you are with vb. Cascading changes from one column to another can be easily accomplished this way.
Onchange formulas are for something else. They are part of the model definition and are used for describing how to cascade changes between IOP data blocks.

Different Bluetooth connections for phone and music streaming

Can I have different Bluetooth connections for phone and music streaming functions on my 4s? If I can is there a way that the will automatically select (remember) the proper bluetooth receiver?

TDMA interference, and is a type of RFI (Radio Frequency Interference) unique to GSM mobile phones. It affects all GSM mobile phones, but is not harmful to you or your electronics. It is just an audible indicator of network activity.
GSM mobile phones generate this interference when they communicate with the cellular network. You don't need to be actively using the phone, as it constantly accessing the network to check signal strength, synchronize the clock, or perform other network-related tasks. The only way to stop this interference is to turn off the phone or its network capabilities. For example, by using Airplane Mode.

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

Switchport Configuration for NEC Phones

Having an issue setting up a switch for NEC ip phones. If I use something like this:
int gi 0/23
description Phone and PC, no hubs
switchport mode access
switchport access vlan 10
switchport access voice vlan 5
spanning-tree portfast
lldp transmit
lldp receive
The phones boot up fine, but get ips from the dhcp pool for vlan 10. My pc behind that also gets an ip in vlan 10. I went to a test phone and enable cdp and when I went back to my switch I saw the phone in cdp neighbors, but the phone still grabbed the ip from the other vlan. If I manually key in the vlan on the phone it gets the correct ip and the pc behind it gets the correct ip as well. Just wondering if there is a better to go about this as they are deploying 150 phones.

Have a look at table-10 and make sure you have configured all the options (150, etc.) correctly.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_4/ccmcfg/b02dhsrv.html#wp1050520
HTH

How to configure SGE2000P with CISCO 7900 phones and data VLAN

Hello all
I am having problem setting up SGE2000P switches to work with my default data VLAN and additional voice VLAN. I am configuring it to pick IP address for phones from voice VLAN which is working fine but when I connect a PC on phone port it is also picking up an IP from Voice VLAN while default VLAN is data with different scope of IP.
Is there any good discussion or documents out there to help me resolve this issue before I pack these switches and purchase ESW 500 series. I have ESW 500 at another client and they are working fine out of the box but this guy is giving me hard time.
Any suggestions help will be appreciated
Mo

HI Muhammed,
I suggest you contact the Small Business Support Center for some help:
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Oracle data guard configuration for primary and standby db_name

I am working on configuring an active data guard for one primary DB and one standby DB. I have a few questions:
1. Can I use different db_name, db_unique_name and instance_name for primary and standby. For example: primary(db_name, db_unique_name and instance_name)=chicago. When I create standby DB with Rman backup and copy of pfile and control file from primary DB or use Grid control to create standby database. Oracle document or Grid control all keep standby db_name=chicago. Only make standby db_unique_name and instance_name=boston. Due to my application system condition, I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?
2. In primary datafiles, application system generate datafile name like this: hr_chicago_01.dbf, fn_chicago_01.dbf. When I move datafiles to standby server, if I plan to use db_name=boston for standby DB, can I rename datafiles as
hr_boston_01.dbf, fn_boston_01.dbf? In this way, datafile name match up with db_name. but I will create standby log group and members on primary and standby identically. If in future switching over, DB will not have problems.
3. If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standby. Then "alter database backup controlfile to trace" from promary and also " create pfile='/xxx/initSTANDBY.ora' from primary. Then modify init.ora and controlfile. Then run control.sql to bring standby DB up. After that, configure redo log shipping and apply with data guard or SQL. Is this a acceptable way to create physical standby DB?
Please advise your comments. Thanks in advance.

I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?NO. DB_NAME must be the same ("chicago") at both sites. The Standby will be using a different DB_UNIQUE_NAME (e.g. "boston") and can be using a different Instance name / SID (e.g. "boston").
can I rename datafiles Yes. The database file names can be changed.
If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standbyWhat is the difference between the first sentence (a backup of the primary) and the second sentence (a copy of the primary) ? A Copy is a backup.
Are you intending to differentiate between an RMAN Backup and a User-Managed (aka "scripted") backup ?
Normally, for DataGuard, tou can use non-RMAN methods to copy the database but there's no value add in this.
You'd still have to setup DataGuard ! (and I wonder if you'd have complications setting up Active DataGuard).
But remember that you MUST create the Standby controlfile from the Primary and copy it over to your Standby -- particularly as you are planning to use DataGuard. This is not created by 'alter database backup controlfile to trace' , but by 'ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'filename''
Hemant K Chitale

Port with multi-vlan for voice and data??

Hi guys,
I've a situation where my VOIP and DATA on a different segments. Voice is 10.x.x.x riding on VLAN 701. And my data is 192.x.x.x riding on VLAN 100.
The problem occur when our receptionist PC have a software installed for call forwarding for our general line. This software need to be on the same vlan with the IP Phone vlan which is 701. If I put her PC on those vlan, she can't access
to our LAN which is vlan 100. So she can't check her email etc.
Can I know what is the options I have? Can I configured multi-vlan for her PC on the switch? We are using Cisco PoE 3560 switch. Thanks.

Hi,
on the L3 switch, you should have an IP address for both VLAN 701 and 100. So, the L3 switch is doing inter-VLAN routing.
This means, unless you have ACL blocking traffic, any device will be able to reach any other device, even on a different VLAN.
And, no matter where you put voice and applications, everything will work anyway.

Can I use one contacts database for phone and email?

I have a gmail contacts list for email. I also have a phone number database imported from a non-apple cell phone to my iPhone 5c. I find that I'm using the iphone more and more for both phone and email, but I also use my PC for email.
I exported my 300+ gmail contacts using google to a CSV file, cleaned it up, and imported it back to my PC. Of course, it doesn't have the 200+ phone numbers that are in my phone number listing now on my iPhone.
I like working with spreadsheets because of the many utilities to sort, cut/paste, etc. If I take my gmail database, ultimately add phone numbers, and sync in iTunes will it be accessed whenever I want to make a call and also when I want to send an email? I'm hesitant to sync with the new gmail "email only" database for fear of losing all of the many phone numbers in my iPhone. Can I keep my phone numbers temporarily while I edit my master contacts database - maybe by having separate databases on my iPhone for email and phone? I hope to eventually keep a master PC database of all data on all entries and change/reimport as needed.
Thanks for letting me know if this will work, or if there are any cautions that I should heed.

Yes.

Speakers work for phone and other apps, but not for music playback on 4G after downloading ios 8.0.2

I know others are having off the wall issues with sound on their iPhones after installing the iOS 8.0.2...In my case? Thank God the sound for phone calls and alarms work, but the same can't be said for when I try to play music or a radio app?? And the speaker option on my voice mail sticks....
There are 1001 other issues that I have with this so called upgrade, and let's just say that I've been looking at using my AT&T other phone options since I'm ready to upgrade....Since this is the second time in about a year that I've gone through **** and back with an Apple OS upgrade and there just isn't the cache there once was with owning an iPhone? I'm seriously questioning why be brand loyal when I can't find an answer to my issue and the one solution is to go to the Apple Store and deal with the arrogant and rude clerks OR try and see if someone has a decent solution, OR wait for weeks for Apple to offer a bug fix or access to older OS's!
(BTW--I HATE how this OS kills the battery! And I'm not happy with the 2 apps that I didn't want and can't get rid of!)

I was hoping that the iOS 8.1 update would have fixed my problem, but it has not. The app updates continue to hang and will not up date unless I follow the procedures mentioned earlier. I have spoken to Apple Care, and their only suggestion was to do a network settings reset. This worked once, but on the following days as more app updates appeared, they would not download. Once again, the only way to achieve my goal is to do one of the following;
Change networks
Sync through iTunes
Reset Network Settings
Turn off Wi Fi and use Cellular Data (not my preferred option especially while at home and connected to my home network).
I think Apple are loosing the plot and seem to be chasing profits more than producing a good reliable product. I would have respected the company more if they had admitted that iOS8 was not ready for general release rather than release a faulty system causing so many problems.

Deployment question for EMS and Data Objects

I have configured tens of EMS and data objects. It's deployment time to a new environment, say Dev to Test. Do i have to manually create all this data objects and EMS in each environment, or is it possible to write a script or deployment script to do it automatically for each environment. If not, it will be a headache configuring all these DO and EMS again for eah environment. Please suggest.
Thanks

See this guide: http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/testprod.htm#CHDDIEBI
Specifically on the usage of icommand in section 20.4.2

R/3 configuration for 0SD_C01 and 2LIS_01_S001

Hi guys,
I have activated the infocube 0SD_C01, the complete flow. I created an infopackage for its infosource 2LIS_01_S001 and made an extraction. I got an error with a delta initialization and with a full upload I got that there is no that data in R/3. Im currently using BI 7.0 and R/3 ECC.
Is there something I need to do first in R/3, some kind of configuration for that datasource? They told me for the datasources 2LIS* used the transaction LBWE, but I dont see 2LIS_01_S001 on that transaction.
What do I need to do in R/3, in order to do extractions? Does someone have a manual for this Datasource/Infosource that would like to share? My email is [email protected]
Thanks a lot
Vic

Hi,
There is no LO datasource , you have to use LIS ..i.e, 2LIS_01_S001.
I hope you know the steps to activate and load data into BW using LIS.
Steps are as follows:
1) Activating LIS update - goto OMO1 transaction code
In the Updating Info Structures(S001) - double-click the Updating radio button for Info structure S001.
In the Parameters dialog box select Synchronous updating and choose ok.
2) Goto OLI7 Transaction code - run the statistical update.
3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
6) In BW, Replicate DataSource, and run info Package with Initilization.
7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
From now on you can run your Delta Infopackage
Hareesh

871 Switchport Configuration for Phone and Data

Similar Messages

Maybe you are looking for