8800 GTS 512 (G92) giving me only 6 FPS

I have installed the original drivers in the CD, I went to nvidia and downloaded the latest drivers (169.25) and still get 6 fps in 3d.
2d is working fine. I just got this board today and I am starting to worry I have a bad card.
Can someone give me some clues?
Ventilation is fine, I have a Coolermaster CMStacker Case with ample space and good fan ventilation
Please Help

You still haven't answered anythink which you have been asked...,
nor yet we have any info about your PC, especially PSU used..:
Quote from: BOSSKILLER on 15-December-07, 10:34:06
Make sure that power cable is plugged to VGA. Read Moan Guide too
Quote from: Salman on 15-December-07, 13:38:18
yup power cable must be plugged in also install the new OS(clean installation) and latest drivers then give it a go it will work perfectly ...
Quote from: AaronYuri on 15-December-07, 08:10:52
What do you get 6FPS in? Have you tried different games?

Similar Messages

NVida + 7900GTX + 8800 GTS 512 + 3 LCD's - Single Desktop Fail

I've been trying to get this to work for months - literally months (on Fedora, Ubuntu, Gentoo, and now Archlinux, which is where I'll stay), with no success. All I want is the ability to use a single desktop across all three LCD's. This is what the setup is:
Geforce 7900 GTX
- 1600x1200 LCD
- 1600x1200 LCD
Geforce 8800 GTS 512
- 1920x1200 LCD
I can get everything to work flawlessly as 3 seperate screens. When I turn on xinerama (and turn off randr, or even leave it on), X starts up, shows the root desktop, then bails. If I have Gnome installed, it tells me it's unable to find a valid depth, but if I just have the virgin X with nothing extra but the basics installed, it just drops to the console with no error message of any kind. The Xorg.0.log also shows no errors in either case. Other WM's vary in the messages they generate as well (I now have a VMWare image with snapshots with most major WM's just so I can easily try and switch between various WM's), but all fail the same way.
Since the screens are on different cards, randr isn't an option. I have used many combinations of generating the xorg.conf, as well as writing it by hand, and it always ends up the same way.
I am not new to Linux (nor Unix), but I am new to Arch. It is, finally, the distro I have been looking for for a LONG time. I wished I had noticed it a long time ago and saved myself a lot of hassle. Been a Red Hat/Fedora user since the beginning.
Anybody got any ideas? I can provide the logs and conf's if anyone likes, but I doubt they'll help. I guess what I am hoping is that someone has seen or heard of this before, because failing that, I think I might be SOL.
One last thing: I haven't tried this with the NV driver, but I will try that later today just to see if it's only the NVidia driver that's the problem. I am actually pretty sure it is specific to the NVidia driver, but I haven't verified for _sure_, and I need 3D ability, so the NV driver isn't a long term solution.

Glad to hear it. Well, not really - glad to hear I'm not alone in this. Uh, I think I'll stop before the hole gets deeper...
I've submitted a report to NVidia, but I don't expect I'll hear from them about it since it's not a common problem.
I'm checking into faking the Xinerama extension to see if that can work; Seems plausible, but who knows.
If only I could find a reliable and easy way to move windows between screens, I'd be able to live with the 3 separate desktops.
Thanks for the confirmation that I'm not going insane!

8800 GTS 512 OC - Runs in 3D for few minutes then freezes

Hi there.
I just got an 8800 GTS 512 OC, upgrading from a Radeon 1950 XT. The card works fine in 2D (it's in the machine as I type this). But when I try to play any game, it works fantastically for a few minutes (or seconds depending on how intensive the game is), and then freezes completely, with sound looping endlessly. I have to reboot to get out of it.
I got the latest WHQL driver from Nvidia, 169.25, but that didn't help things. Oh, and don't worry, I removed the old ATI drivers and ran DriverClean Pro to remove any hidden remnants before I installed the card and drivers.
I cannot use MSI Live Update, because as soon as I install it, I get a BSOD after rebooting:
flashsys.sys,
page fault in non-page area
0x00000050 (0xBAB78000, 0x00000000, 0xBADF71B0, 0x00000000)
Thinking it might be an OS issue, I then reformatted the system and ran a clean install of windows, but the same thing happened again. Makes me suspect that this is a hardware issue, since it seems the new WHQL driver is working jsut fine for other people.
My system has worked fine until this card was installed, but here are my system specs for reference:
System specs:
E6600 at stock speed cooled by Zalman 9500 mod with Noctua 120mm fan
Asus P5K-Deluxe, with P-ATA, Firewire, LAN og WLAN controllers disabled.
2GB Corsair Dominator 8500 @ 1066 v/ 5-5-5-18, 2.2V
Corsair HX-620W PSU (should be more than enough juice)
D-Link DWL G510 PCI Wifi kontroller
NEC Optiarc 7170 Sata II DVD burner
Seagate Barracuda 7200.10 500MB Sata II (houses C: partition + E: storage)
Old Maxtor 320GB Sata I (storage, D:)
Gigabyte 3d Aurora case fans: 1x120mm front, 2x120mm back
and of course:
MSI 8800 GTS 512 OC, ved 730core 1944 mem, with Forceware 169.21 WHQL
Running legit Windows XP Professional SP2, fully updated.
other processes:
ESET Smart Security
Logitech SetPoint
Soundmax panel for onboard sound
The card also fails while testing with ATITool artifacts scanner. A worrying thing I have noticed is that the fan speed does not adjust as temperature increases. Instabilities while running ATITool start when the card hits around 75C, and gets worse and worse as it passes 80C. Fan still runs at same speed. Might be a fan controller issue, but this card should not be having problems at 75C-85C.
I should specify, that it does not actually fail the artifact test...it just starts freezing, then going again, then freezing, then going again, until it freezes completely.
I really do not know what to do next. I think my card is just plain faulty, so thinking of RMA. If anyone has any ideas or advice, please please help me out.
Best regards,
Mikkel.

Quote from: BOSSKILLER on 23-December-07, 01:18:06
Setup VGA mem. freq. to 1872Mhz and re-test.
OK, I just tried out your suggestion, but sadly, the same thing happens. I should add that it does exactly the same thing when just running the 3D view
Also that the card emits a high-pitch modulating whining noise (it is not bearing noise from the fan, it sounds more like a high-pitch capacitor buzz), is that supposed to be there?

Big problem with AE CS3 - abnormal slow with nvidia 8800 GTS 512 !

I try everything, newest drivers (nvidia 8800 GTS 512), older drivers, beta drivers, alternative drivers, uninstall QTime, disable OpenGL in After Effects, delete openGL plugin.... Simply, did not help. AE CS3 is abnormal slow, type text, draw and edit mask, any kind of moving element , moving windows (interface).... everything. When turn on openGL, openGL work fine, fast, smooth., but non openGL operation (written above), still the same! I did some test and found that similar problem have with encore (not my primary application, but...). Other programs work perfectly (premiere, photoshop, illustrator). I have core2 quad 6600 @ 3 GHz, 3 GB RAM, 8800 GTS 512 @ 2560 x 1600, win XP pro strong configuration but unusable for AE CS3!!! I try to reduce resolution, but also, did not help.
Please, is there anyone with some solution? Is problem with AE or drivers? Thanks.

>My 8800GT is not going to work with AE and it's listed under Adobe's
>supported graphic cards????
That's premature to say. Please understand that in the OpenGL game there are just too many varaibles, a lot of them outside the control of Adobe or any other software vendor for that matter. Please consider the following:
- if tested, a card is usually tested in one configuration available at the time that presumably will be the most common one bought by users. There is room for better sub-versions (more VRAM, higher memory clock), as well as weaker ones (less VRAM, lower clock speed).
- the previous applies to the host computer. Nobody can test the 100 new different motherboards that come out every month let alone all that are already on the market. Same for RAM, processors, other peripherals.
- multiple vendors may produce cards based on the same design, but may use different BIOSes and branding
- even under ideal conditions, a given graphics card will be tested in about 30 different computer or so - some in Adobe's lab, others with Beta testers. As it stands, neither of them will necessarily coincide with your configuration nor will anyone throw a lot of money out of the window just to buy a hundred new testing machines...
- BIOS configuration, motherboard voltage fluctuations, PCI timings and whatnot can vary from user to user and thus have drastically different influence how a certain component behaves.
- lastly, driver configuration can vary. Even with seemingly the same driver version, the config may auto-adapt to different settings based on the environment it finds.
So given all of the above, please understand that this is a *******' tough job and by all rights nobody intentionally tries to scam users or something like that. You will also find it hard to blame anyone in legal terms, as you usually agree to use the software "as is" - with all it's flaws. As David says - please try first. We will gladly try to help you sort out any issues and who knows - none of the problems affecting other users may come down on you and you'll be a happy camper after all.
Mylenium

Ms 7253 with nvidia graphic card 8800 gts 512

hi,
im trying to install this graphic card 8800gts 512 but the system or bios doesn't see it
spec´s
mainboard ms-7283 vms
bios w7253vms-v1,6 081607 10:22:02
proc amd 64 x 2 4200+ 2,20 ghz
mem kingston 2 x 1gb
windos xp pro sp 3
power supply m media magic atx p4 750w ws
graph. nvidia 8800gts 512
the vga on the mainboard works, tested the nvidia card in to other systems and there it works perfect
what do i wrong??
thanks
jdtexas

Quote from: Svet on 02-August-11, 01:46:48
have you connected power cables to the VGA?
do >>Clear CMOS Guide<< with power cord removed.
also make 1st VGA the add-on one, if there is a such option
yes it is connected and in this bios version there is not an option for this
i was looking for a bios update but when i go to msi there is non even with liveupdate 5
but i can also see that it doesn't read the mainboard type correctly so live update is not the rigt solution for this

8800 GTS do not support 8x and 16x antialiasing?

Hello
When I change my antialiasing settings in Doom 3 to 8x or 16x and then restart the app it
keeps reseting to 4x. Also, in the config-file it only seems to recognize 256 MB VRAM, 8800 GTS has 512.
Is this a bug in the Doom 3 app or is it the 8800 GTS drivers or is there an actual solution to this?
Thanks in advance!

Quote from: Glacial on 20-December-06, 03:17:08
Don't worry I will do the CPU upgrade thing, it's a future plan.
I bought the 8800, as a replacement for my old 6600GT which is sorta dead!
Ok, seeing as I seem unable to find a decent single rail PSU on UK sites how about this:
http://www.ocztechnology.com/products/power_management/ocz_gamexstream_power_supply-nvidia_sli_ready_
It has 4 rails!
On further research i've discovered that OCZ tell which rail is attached to what.
One for the CPU
Another one for CPU and PCI-E
One for Peripherals including SATA
One dedicated PCI-E
What d'ya think?
Cheers guys.
Forget about split-rails, get a decent single-rail.
Tagan has nice ones, that can be combined with a switch!

Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I put this in the MOBO forum too as it hits both areas...}

Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down...... AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually. AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory. Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.

Dual Core Center- MSI P6N SLI Platinum and MSI 8800 GTS 640

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card.
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I'll put this in the graphics forum too as it hits both areas...}

Running a P6N SLI Platinum and a MSI 7900GTO with Dualcorecenter 2004 and everything is ok.
Never installed any driver from the MSI CD which comes with the board or graphics card. All drivers are downloaded
from Nvidia.
Maybe the 8800 series is not supported yet.

SLI with 2 8800 GTS 640Mo

Hello,
I'm a french customer, so don't care about my english
I have some troubles with my two 8800 gts cards. The SLI mode stay disable.
This is my configuration:
*Vista 32 ultimate
*ASUSTeK Striker Extreme (NVIDIA nForce 680i SLI)
*Intel Core 2 Duo E6750
*Kingston 2 Go DDR2-SDRAM PC6400 CL4 (2 x 1 Go)
*MSI NX8800GTS-T2D640-HD-OC- 640 Mo ! overclocked version !
*MSI NX8800GTS-T2D640-HD- 640 Mo ! normal version !
*Cool Master Real Power M1000 (1000 watts)
I used NiBiTor to look the difference, and I find that bios version is not the same.
Version 60.80.07.00.02 for the normal version.
Version 60.80.0A.00.02 for the OC version.
Do I need to flash one card to enable the SLI mode ?
Anyone have an idee ?
PS: * I placed the bridge between the 2 cards
* Nvidia driver version is 169.25

Does both VGA's are detected by OS?
Yes all detected
Have you connected power cables to each VGA's?
Yes
Make sure that your VGA's are located in correct PCI-E slots.
Both on 16x
Make sure that you have all Vista patches installed
Thanks for it and installed
Does it work in XP?
I don't have any version of XP, so i can't check this point :/
Verify SLI status with Everest:
I don't have the same as you
I make a report via Everest. Perhaps that helps you ...
http://spacefrog.no-ip.org/ReportG80SLI.htm
*I've flash the bios of my MB (Extrem Striker) with the last one (1401).
*I checked all option in BIOS and something ode ... "SLI-Ready Memory" are disabled and I can't change it.
Is it because my RAM is not compatbile ?
I turn around and i don't anderstand why SLI don't want to be enable ... I'm crying

HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

Hi David,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Tried resetting the PMU for PB/iB?
http://docs.info.apple.com/article.html?artnum=14449

P6N SLI with Geforce 8800 GTS 640 MB won't install Windows

Hi all,
After a reply in the topic for updating your bios.
I was advised to ask the solution for my question here before flashing my Mobo.
My Specs:
Intel Core 2 Duo 6600
4 GB DDR-2 (4 slots)
Geforce 8800 GTS 640 MB PCI-Express
Sitecom WL-171 wireless lan card.
500 GB Hitachi SATA Disk
1 DVD burn/reader
P6N SLI Mainbord with Beta Bios because it wasn't able to use 4 GB Ram at that time.
Zalman 460 Watt
Now the problem
First it was working but with a Geforce 7600 GT 256 PCI-Express.
I have upgraded it today to a 8800 GTS.
After this upgrade my Vista won't boot anymore, same for my Ubuntu.
What is causing the problem?
Is my Powersupply not strong enough or should I flash my bios?
Thanks in advance.
edit: Windows XP 32 or 64 bit. Vista 32 or 64 bit all gave the same stop error: 0x000007e
The knowledge base sais it is a driver problem?
But it isn't even installed.

Check VGA power cable too.
"But it looks like it is the Power Supply or the Videocard.
Should this Power Supply succeed? Coolermaster"
look here for good PSU suggestions:
Corsair VX450W:
• ATX 2.2 and ATX 2.01 compatible
• Ultra-quiet 120mm double ball-bearing thermally controlled fan
• High efficiency, up to 85% under a wide load range
• Single +12V rail offers maximum compatibility with latest components
• Supports SATA and PCI-E devices
• High-quality Japanese capacitors
• Active Power Factor Correction (PFC) with PF value of 0.99
• Auto-Switching universal AC input from 90~264V.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection
• Extra long fully-sleeved cables support full size tower chassis
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 50mm(W) x 86mm(H) x
• 5 Year Corsair Warranty
Review: http://www.silentpcreview.com/article751-page1.html
-----> https://www.novatech.co.uk/novatech/specpage.html?CSR-VX450 £39.95
Corsair VX550W:
• Supports the latest ATX12V v2.2 standard and is backwards compatible with ATX12V 2.01 systems.
• Ultra-quiet 120mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying the RPM in response to temperature.
• Double-forward switching circuitry design offers maximum efficiency, up to 85% under wide load range.
• 99% Active Power Factor Correction provides clean and reliable power to your system.
• Universal AC input 90~264V automatically scans and detects the correct voltage. No more hassle of flipping that tiny red switch!
• Dedicated single +12V rail offers maximum compatibility with latest components.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components.
• High quality Japanese capacitors provide uncompromised performance and reliability.
• 6 Serial ATA connectors
• Extra long cables support full tower size chassis.
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 150mm(W) x 86mm(H) x 140mm(L)
• MTBF: 100,000 Hours
• Safety Approvals: UL, CUL, CE, CB, FCC Class B, TÜV, CCC, C-tick.
• 5 Year Corsair Warranty
http://www.play.com/PC/PCs/4-/3476852/Corsair-VX-550-PSU-Power-Supply-Unit-550W/Product.html £59.99[/color]
Newest great PSU's Series TX from Corsair:
http://www.corsairmicro.com/products/tx.aspx
650W & 750W Models:
PC Power & Cooling Silencer 610 with 49A on a single +12V rail.
or
PC Power & Cooling Silencer 750 with 60A on a single +12V rail.
Tagan TG480-U01: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=82572 http://www.hexus.net/content/item.php?item=694&page=2
ENERMAX Whisper II EG465P-VE FMA(24) 460W (+12V@33A) ---> http://www.avadirect.com/product_details_parts.asp?PRID=1925 approx. $82
ENERMAX EG651P-VE FM(24P) ATX 550W Power Supply (+12V@36A) http://www.enermaxusa.com/catalog/product_info.php?products_id=70 approx. $98
OCZ PowerStream 520W (under rated +12V@33A)---> http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
approx. 110$
Silverstone Zeus ST56ZF 560W (+12V@38A) ---> http://www.silverstonetek.com/products-56zf.htm approx. 110$
Sparkle 550W (EPS) FSP550-60PLG (+12V@36A) --> http://www.sparklepower.com/pdf/FSP550-60PLG.pdf approx. $76
Antec TruePower550W EPS12V (+12V@36A) ---> http://www.antec.com/us/productDetails.php?ProdID=20551 approx. $86
ENERMAX EG651P-VE FM(24P) ATX12V V1.2 550W:
+3.3V@36A; +5V@36A; -5V@1A; +12V@36A; -12V@1A; [email protected]
http://www.newegg.com/Product/Product.asp?Item=N82E16817103437
Good PSU vs Cheap/Unamed/Budget PSU Oscilloscope scan:
Bad PSU:
Quality PSU:
Cheap PSU Codegen 350W:
Enermax 365EG(350W):
What would happen if your PSU can't cope with the load?
* bad 3D performance
* crashing games
* random shutdown
* spontaneous resetting PC
* freezes during gameplay
* PSU overload can cause it to break down
Add-on to read:
PSU's---2 x 12v---The Dual Rail Myth
Is your problem caused by your PSU?

NX 8800 GTS 320 mb OC memory problem

Hi everyone, i have a msi 8800 gts 320 mb OC and my problem is that the graphic card is using the 320 mb always it don't stop
i have a mini aplicacion to see the clock and the fan and the memory and the memory is using 99% of it
How can i solve this problem?

I don't really know what your problem is to be honest. Are you taliking of system or vga memory. If vga memory be aware that there is no power saving on old G80 vgas for the memory.

512 MB ipod will only hold 487 MB of songs/data

My 512 MB ipod will only hold 487 MB of songs/data, even when everything has been deleted off of it, and it has been restored. is there any way i can get rid of this extra "other" info on my ipod to use all 512 MB for songs? thanks

i think that woul be removing the ipod software and the file structure which allows the ipod to function. ex, i just bought a 300GB hard drive for my pc, when i get properties on this drive it reads as a 279GB hard drive (maybe its the partition table, ntfs stuff etc.)

Why does the PCI-1408 we used can reach only 8 fps?

We are using IMAQ PCI-1408 to stud y the motion of an object in mechanics experiments. The maximum acquisition rate that we could obtain is just 8 fps. We are using a computer with Pent III 800Mhz processor and 128 Mb RAM. We even tried to use a code in from Costumer Solution (Digital Video Recorder with Motion JPEG, Lehnich H. et. al.), still we could not reach 30 fps. What could we have done wrong?

Thanatus,
I assume your camera is capable of 30 fps.
First use MAX to verify that you can acquire 30 fps. Select your camera and use the Grab button. You should get full speed video display. The lower right hand corner should show how many frames per second it is acquiring and displaying. If it is only 8 fps, you have a problem with your hardware. If it is 30 fps, your problem is in the software.
The most common software problem is using snap, which is very slow. You should either use grab or a sequence to acquire your images. Most likely, you will want to acquire a sequence of images and analyze them after you acquire them. If you are using grab, your frame rate will depend on your loop speed. If you are doing analysis simultaneously, that is proba
bly slowing you down.
Bruce
Bruce Ammons
Ammons Engineering

NX8800GTS 512 OC edition freezes only in SLI

Hello users I have a similar problem with the NX8800gts OC edition in SLI (as in having 2 cards not SLI enabled). I have read earlier posts with similar problems, mine is a little different because it only occurs when I have 2 cards in the system. It just freezes randomly whether or not I'm playing a game. It hangs more frequently when I do. It freezes with SLI is enabled or disabled. I have tried both 169.21 and 174.74 drivers, performed memtest86-no errors (the freezing occurs with both 2gigs and 4gigs of memory), monitored my system temperature GPU-77C, CPU-33C, System-49C-right after restart from freeze.
I solved my problem but removing 1 card from my system and haven't had any problems yet. I don't think the other card is defective, because I also tested that card by itself for 5-6 hours without any hangups. Before I return RMA one card back to newegg.com, anyone have any ideas? Here's my gig:
Intel Q9300@ 2.5 default
4Gig Ocz Reaper X PC8500 defualt latency
PC Power and Cooling Silencer 750 Watt Powersupply
MSI P7N SLI Platinum@ default (BiOS not updated)
2x MSI NX8800GTS 512 OC edition
Coolmaster Cosmos Case

I'm going on just what I've read in other places, but I've heard the bios update 1.1 makes a big difference.
I also want to kinda bump your thread up since I have the following coming (should arive Monday) that is very similar to your system. (I almost got the OCZ ram you did!)
I would like to see how this is resolved, and really hope it works without other major issues.
1 PC Power & Cooling S610EPS EPS12V 610W Continuous @ 40°C Power Supply
1 Pioneer 20X DVD±R DVD Burner Black IDE Model DVR-115DBK1
1 CORSAIR XMS2 DHX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X4096-6400C4DHX
1 Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 MSI NX8800GTS 512M OC GeForce 8800GTS (G92) 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
1 Thermaltake Armor Series VA8000BWS Black Aluminum / Steel ATX Full Tower Computer Case
1 ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler
1 Arctic Silver 5 Thermal Compound
1 MSI P7N SLI Platinum LGA 775 NVIDIA nForce 750i SLI ATX Intel Motherboard
1 Intel Q9300 2.5 Quad Core CPU

8800 GTS 512 (G92) giving me only 6 FPS

Similar Messages

Maybe you are looking for