9iAS(1.0.2.0.0) and 8.1.7 on one machine

Hi i'm running 8.1.7 on Suse 7.1 the database is up and running but if i install Apllication server on it the portal 3.0 tool fails.I did configure the listener.ora,tnsnames.ora and init.ora files
- Should i install 9iAS as a different user?
- change the ORACLE_HOME settings ?
- should i use a diff. port?
Am i missing something ...
does someone maybe have it documented...
Thanks

I understand you have installed Oracle 8.1.7 database. I did not get what is meant by Suse7.1. Anyway, installing database and iAS on the same machine is not a problem at all.
except that some precaustions to be taken to avoid port conflicts.
8.1.7 database comes along with apache and if this service is running there will be port conflict between database apache and iAS apache and the service may not start
You can either change the port number of apache of database or if it is ok stop the service of database apache.
If this does not solve your problem, let me know what error you are getting while installing Portal. You can check the log at
(oraclehome>/assistants/opca/instll.log fil

Similar Messages

  • Installing NW CE7.1 and EP 7.0 on one machine

    Hello All,
    i have a question i am trying to install NW CE 7.1 and NW EP 7.0 on one windows 2003 ser machine but both are with different DBs EP with MSSQL 2005 server and CE with SAPDB. EP is based upon JDK 1.4 while NW CE 7.1 is based upon JDK 1.5. I didnt installed JDK 1.5 seperatley but i think its allready included in the package of nW CE 7.1. So installed for NW CE finished successfully (i had EP allready installed).
    i am facing few probelms
    1. I am not able to start diagonosis agent successfully it stays in yellow color forever. please find the snapshot of trace file at end of message.
    2. I dont know the default port which will be used to access NW CE as my EP is allready installed on the
    default port 50000. Can i know the default port used to access NW CE i allready tried 50001, 50002 and 50003. My EP is still working fine on 50000 port. Or does CE functionality going to be included into existing port 50000.
    3. Is it even possible to install CE 7.1 and EP 7.0 on one system with different back-ends?
    4. Do i need to install JDK 1.5 before starting CE 7.1 installation or its allready included?
    any help will be highly appreciated.
    trace file
    F  ********************************************************************************
    F  [Thr 1788] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
    F  [Thr 1788] *** LOG => Starting nodes: runlevel 3.
    F  ********************************************************************************
    F  Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
    F    arg[ 1] = -nodeId=0
    F    arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
    F    arg[ 3] = -hostvm
    F    arg[ 4] = -nodeName=smdagent
    F    arg[ 5] = -file=C:\usr\sap\DT1\SMDA97\SMDAgent\smdagent.properties
    F    arg[ 6] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
    F    arg[ 7] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_smdagent
    F    arg[ 8] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_smdagent.out
    F  exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
    F  libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
    F  stdout  : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
    F  stderr  : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
    F  console : no
    F  debugger: no
    F  nice    : no
    F  ********************************************************************************
    F  Process SMDAgent started with pid 5860
    F  ********************************************************************************
    F  [Thr 1788] *** LOG => Process smdagent started (pid 5860).
    F 
    F [Thr 1788] Mon May 31 22:32:06 2010
    F  [Thr 1788] *** LOG => Process smdagent running (pid 5860).
    F  [Thr 1788] *** LOG => Instance state is "All processes running" (RUNNING @ 1, ACTIVE).
    F  [Thr 1788] *** LOG => Process smdagent stopping (pid 5860).
    F  [Thr 1788] *** LOG => Instance state is "Some processes running" (RUNNING @ 0, INACTIVE).
    F 
    F [Thr 6068] Mon May 31 22:32:06 2010
    F  [Thr 6068] *** LOG => Signal 13 SIGCHLD.
    F  [Thr 1788] *** LOG => Process smdagent stopped (pid 5860).
    F  [Thr 1788] *** WARNING => Node smdagent failed: result 2, exit code -11112. [sfxxnode.hpp 1005]
    F  ********************************************************************************
    F  Java process [collector] properties:
    F    section name     : collector
    F    config file      : C:\usr\sap\DT1\SMDA97\exe\startup.properties
    F    node name        : collector
    F    home directory   : C:\usr\sap\DT1\SMDA97/j2ee
    F    shutdown timeout : 136000 ms
    F    exit timeout     : 7000 ms
    F    debuggable       : false
    F    debugger active  : false
    F  ********************************************************************************
    F  ********************************************************************************
    F  Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
    F    arg[ 1] = -nodeId=1000
    F    arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
    F    arg[ 3] = -DSAPINFO=DT1_97_collector
    F    arg[ 4] = -hostvm
    F    arg[ 5] = -nodeName=collector
    F    arg[ 6] = -file=C:\usr\sap\DT1\SMDA97\exe\startup.properties
    F    arg[ 7] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
    F    arg[ 8] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_collector
    F    arg[ 9] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_collector.out
    F    arg[10] = -clusterId=smdagent
    F    arg[11] = -exitcode
    F    arg[12] = -11112
    F  exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
    F  libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
    F  stdout  : C:\usr\sap\DT1\SMDA97\work\std_collector.out
    F  stderr  : C:\usr\sap\DT1\SMDA97\work\std_collector.out
    F  console : no
    F  debugger: no
    F  nice    : no
    F  ********************************************************************************
    F  Process collector started with pid 3212
    F  ********************************************************************************
    F  [Thr 1788] *** LOG => Process collector started (pid 3212).
    F 
    F [Thr 2352] Mon May 31 22:32:07 2010
    F  [Thr 2352] *** WARNING => process collector (pid 3212) died (exit code 2). [sfntlib.hpp  830]
    F  [Thr 2352] *** LOG => Signal 13 SIGCHLD.
    F 
    F [Thr 1788] Mon May 31 22:32:07 2010
    F  [Thr 1788] *** LOG => Process collector died (pid 3212).
    thanks
    Mani

    i am able to start it, so question 2,3 and 4 vanishes
    For question 2 is the port number builds as 5instance number00 e.g if Java EE server instance is 02 then port assigned is 50200. i think its possible to install both and JDK 1.5 is allready included in the SAP CDs.
    but i am still not able to start Solution Manager Diagonostic Agent my first question.
    Thanks
    Mani

  • How can I duplicate the same settings (add-ons AND bookmarks) from Firefox on one machine to another

    From memory, it used to be possible to create a srtup file of sorts to re-create/re-establish not only bookmarks but also all the add-ons from one Firefox to another - on a different machine. In short, I would like to have them to be identical.

    You need to mount that other partition to be able to access files on it and then browse to the hidden profile folder on that partition.
    /home/user/.mozilla/firefox
    You can only restore a JSON backup, unless you export the bookmarks in that other OS to an HTML file.
    See also http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • Will separate devicenet and CAN cards work in one machine?

    I have an application that must talk to CAN and DeviceNet at the same time. NI's documentation says that DNET must be removed to run NI-CAN and vice versa. Will they play together if two cards are installed?

    Currently, NI-CAN and NI-DNET cannot be installed on the same machine at the same time, regardless of the number of cards that are installed in the machine.
    However, with some work, it is theoretically possible to install only NI-CAN, implement the CAN interface as normal, then, since the DNET protocol is built on CAN, use NI-CAN to implement DeviceNet functionality on another card.
    Chad Pelletier
    Applications Engineer
    National Instruments
    www.ni.com/support
    www.ni.com/ask

  • How to install oracle8i and 9ias in one machine.

    I need u help. I should install both product in one machine. and should 9ias should be enterprise version.

    For NT here are the steps.
    First you install 817 database say in home orahome1. Your database should be up and runningbefore insatlling iAS
    See that you pagesize(swapfile) is >= 500MB
    Then install iAS in a different home. iAs 10220 will list two homes (default is 806 and iSuites)
    Give the required parameters when prompted.
    If you give me more info as to which version of ias platform and what is your requirement then I can be more clear

  • Patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3

    Could any one give me patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3, because i don't have login at metalink, please send me at [email protected] thank you very much!!!

    The only advice that I can tell you is that you have install the softwares in different Oracle Homes and the rest is to check all pre-requisites and directives in manual installations.
    Joel Pérez

  • 9iASR2 and 9iFS. Install which one FIRST?

    HI,
    I decided to install 9iDB, 9iASR2 and 9iFS into a single computer. However, I'm not sure do I need install 9iASR2 before 9iFs? or other hand?
    Thanks
    Ken

    9iAS Release 2 first then 9iFS into the 9iAS release Middle Teir home.
    Why bother with 9iDB. 9iAS will require 2 Oracle Homes:
    1. Infrastructure - A full 9i database (9iDB hence my question) with Oracle Internet Directory set up.
    2. Middle Tier - All the bits required for J2EE, Portal etc. This is where 9iFS should be installed.
    Since this is one machine you will need a lot of Processor and RAM for 9iDB, 9iASR2, 9iFS. Hence don't bother with 9iDB.
    I have 9iASR2 only on a Win2k Pro system - PIII 933 & 512 MB RAM - The machine has over 700MB committed and swaps most of the time.
    Recommend 1 GB Minimum for what you want (Without 9iDB) possibly 2 GB (With 9iDB)

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

  • Creation of Add-on package for 64 bit and 32 bit SAP Business One Client

    Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
    1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
    2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
    Please help because we are stuck in this issue and cannot move forward.
    Thanks.

    Hi Alejandro,
    That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
    I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
    Thanks

  • I am a Creative Cloud Member and have the Membership for one Year but in one month it syays expired

    I am a Creative Cloud Member and have the Membership for one Year. It has been only one Month and the Plan says expired. I am not sure what has happened but I am unable to find any Customer Care Number of Adobe.  Can anyone please help. Its Urgent. I use MAC.

    Moving this discussion to the Adobe Creative Cloud forum.
    Abhishek_zico you should be able to contact our support team at Contact Customer Care.  You will want to work directly with our support team regarding the status of your subscription.

  • Can I return my iphone and get a brand new one right after?

    Within the 14 day full return policy, can i return my iphone on the last day and get a brand new one?

    We aren't going to give you a pat on the back and say "good job". It's your time. I couldn't care less to be honest.

  • My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

    My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

    Authorization
    iTunes Store- Authorize or deauthorize your Mac or PC.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

  • How do I delete photo ALBUMS from my iPHONE 4? I sync via icloud and I can not see any folders selected in itunes. I searched the internet and basically there is no one who has the answer to how you delete the iphone photo library and misc albums

    how do I delete photo ALBUMS from my iPHONE 4?
    I sync via icloud and I can not see any folders selected in itunes.
    I searched the internet and basically there is no one who has the answer (so far)
    to how you delete the iphone photo library and misc albums
    I have also had every iphone and I am not stupid.
    charles altman

    Replying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....

  • I have an ipad and just bought a second one for my daughter and she wants all my music on her ipad.  We both have our own itunes accounts and music match wont let me put music on hers. how do i get around this?

    I have an ipad and just bought a second one for my daughter and she wants all my music on her ipad.  All the music is under my itunes account yet she has her own itunes account so she can have her own apps and purchase apps with gift cards (She's only 9)
    I subscibe to music match under my account but it wont let me put my music on her ipad under hers or even my itunes account.  I get some sort of 90 day error message.  How do i get around this so I can let her have my music on her ipad?

    iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.

Maybe you are looking for