A general error has occurred. libclntsh.so.10.1: wrong ELF class: ELFCLASS6
Hi All,
we have OBIEE installed on RedHat Linux (64-bit) and getting bellow errore while trying to update row count from RPD.
we are using OCI to connect to oracle database(installed oracle 10g 10.2.0.1 64 bit) and our OBIEE is 32 bit. I have followed all the instructions from old posts like.
setting environmental variables in user.sh file but still its throwing error.
Environmental variables:
ORACLE_HOME=/Oracle/10.2.0.1/client
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$ORACLE_HOME/lib:$LD_LIBRARY_PATH
and client is using ldap to resovle database connection.
ERROR:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. libclntsh.so.10.1: wrong ELF class: ELFCLASS64 [nQSError: 46029] Failed to load the DLL OBIEE_HOME/OracleBI/server/Bin/libnqsdbgatewayoci10g.so. Check if 'Oracle OCI 10G' database client is installed. (HY000
Thanks
Venkat
Venkat,
I'm not sure if you are using OBIEE 11g or OBIEE 10g.
If you are using OBIEE 11g then your #1 problem is that you must install the 64-bit version of OBIEE 11g in on a 64bit OS for all to perform properly.
You must also make sure to conduct the Software Only installation.
Let me know if that is case that you are using oBIEE 11g or not?
Cheers,
Christian
http://www.artofbi.com
Similar Messages
-
A general error has occurred. [nQSError: 27002] Near local : Syntax error
Hi
I am using oracle BI Dashboard.
i had configured my physical , business and presentation layers.
when i click on the answers in the dashboard it also show me my
new create presentation layer.
even i can directly query my database using OBI but when i start using OBI Answers.
i got this error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <local>: Syntax error [nQSError: 26012] . (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "amount total".INVOICE_AMOUNT, STOREMAIN.STOREID FROM local')}
SQL Issued: SELECT "amount total".INVOICE_AMOUNT, STOREMAIN.STOREID FROM locallocal is name of my presentation layer.
while if i Issue SQL Directly it give me result.
like
select * from storemain
storemain is name of table.
Thanks
umesh
Message was edited by:
Umesh Sharma
Message was edited by:
Umesh SharmaMy understanding is Dim01 is taking values from the column - *"Company"."Company Name"*
this being the case, try replacing the column name with one of the values from the column
like @{Dim01}{value1}
value1 being a value from the column *"Company"."Company Name"*..only then it will act as a default value
Hope this helps... -
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred
Hello guys,
I have one fact table (Fact) and five dimension tables (Dim A, Dim B, Dim C, Dim D and Dim E).
The fact structure: PK_Fact (primary key), Column A, Column B, ..*
The dimensions structure:
Dim A : PK_Dim_A (primary key), Column A1, Column A2, ..*
Dim B : PK_Dim_B (primary key), Column B1, Column B2, ..*
Dim C : PK_Dim_C (primary key), Column C1, Column C2, ..*
Dim D : PK_Dim_D (primary key), Column D1, Column D2, ..*
Dim E : PK_Dim_E (primary key), Column E1, Column E2, ..*
The fact table is connected to Dim A with PK_Dim_A and PK_Fact, to Dim B with PK_Dim_B and PK_Fact, to Dim C with PK_Dim_C and PK_Fact, to Dim D with PK_Dim_D and PK_Fact, to Dim E with PK_Dim_E and PK_Fact. The joins have been defined in the physical layer and in the business layer.
Fact-->Dim A
Fact-->Dim B
Fact-->Dim C
Fact-->Dim D
Fact-->Dim E
When I request column(s) from fact table and one other dimension table, everything is fine. When I request columns from fact table and more than one other dimension table, I have the following message error :
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source...does not contain mapping for .... (HY000)
Please could you help me to resolve this error
Thank you very much.Hi,
have you define the level for all the dimensions for the Logical Table Source of your Logical Fact Table? When you perfrom the consistency check (Ctrl+k) do you receive any warning or error?
Thank you.
Regards,
Gianluca -
Meaning of this error: nQSError: 10058] A general error has occurred.
Hi All,
I'm facing a strange problem with Siebel Analytics. The user is getting intermittent "ODBC Driver Returned an error" while trying to run reports.
It is not happening all the time.
I checked the Session. Even I can see some requests are getting following type of error:
"State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition cachedQueryEntryPos != pCacheMetadata->m_cachedQueries.end(), file c:\views_c\nightly\Fri\7.8.5\Windows\vobs\analytics\server\query\Optimizer\Navigator\Src\SQONExactMatch.cpp, line 1139. (S1000)"
We are unsure about what is wrong.
Anyone knows the reason for this type of issue?
Thanks in advance.
Regards
SudiptaTry to change something in report and resave the report, this should solve problem if not, try to get same report from previous release,code base or from backup using Catalog Manager bring the report to new development by Export/Import report.
In this way it worked for me. -
my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you... how can i make it work?
I cannot sign out. When I go to the iTunes & App Stores in settings, The Apple ID field shows my id but it is faded and I cannot select the field.
-
Libclntsh.so.10.1: wrong ELF class: ELFCLASS64
Hello experts.
I getting the follow error when I start the application Remedy
./arserverd: error while loading shared libraries: libclntsh.so.10.1: wrong ELF class: ELFCLASS64
I SO is linux x86-64
My client version is 11.2.0.3.0 for 64bits.
Can You help -me ?as my experience
it's the .o file and library file mismatch in ELF
use
file *.o to check those .o file is 32 bit or 64 bit
then use
gcc -m64 or
g++ -m64
to force conpile and link in 64 bit to comform with library -
General Error has occured.Object does not exist error in the front end
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions please863997 wrote:
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions pleaseOnce again you are invited to How to extract the keys from the ER STUDIO.
Seriously: I am genuinely interested in why members of the BI and eBS community with no history of using the APEX forum persistently use this as a dumping ground for off-the-wall requests. If we can find this out then there might be a (remote) possibility of getting something changed on OTN to prevent it and avoid wasting everyone's time. -
When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred, any suggestions what is wrong? I reset our Internet and turned off the iPad.
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again. -
MySql connection error message "An unidentified error has occurred"
I am trying to connect the Mysql database with dreamweaver
but I keep getting the following error message:
"An unidentified error has occurred". any idea what is wrong?
Any help will be appreciated.
SC XiouSCXiou wrote:
> I am trying to connect the Mysql database with
dreamweaver but I keep getting
> the following error message:
> "An unidentified error has occurred".
There are two common reasons for that happening:
1. An incorrect testing server definition, or
2. A software firewall is blocking access between MySQL and
Dreamweaver.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com -
PLL/FMB compilation - wrong ELF class: ELFCLASS64 error
Hi,
i try to compile PLL/FMB sources in unix server, i am getting the below issue
Processing File {PLL_NAMES}.PLL\c
{ORACLE_APP_SERVER_HOME_PATH}/bin/frmcmp: error while loading shared libraries: libjvm.so: wrong ELF class: ELFCLASS64
-Failed
kindly help to resove this issue.
Thanks in advance.Please use forum {forum:id=82}
-
Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.
Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link -
A serious error has occurred or how the 7.1 update ruined my life.
Ever since the 7.1 update to Premiere, I've had nothing but problems. The desktop app fails to update for every update, and appears to think it's out of date when it's not and then the icon in the menu bar will be grayed out until I reboot 3-4 times. The "workaround for that seems to be to force quit and uninstall the "previous" version and then download the "new" version from the creative cloud web portal. This wouldn't be that large of an issue, but it happens almost every other day.
Then once I can actually open Premiere, the real fun with errors begins. I have received the "A Serious Error has occurred" screen on 30-40 (not exagerating) delightful occasions in the past couple of weeks, with no real details of what is actually wrong. It usually occurs while trying to fix an issue where my multi-clips aren't showing the audio waveforms in the sequence, but it has happened plenty of other mysterious ways. This is even more complicated, because it's happening on multiple systems and one of them isn't even using the 7.1 update and another is offsite and using different hardware. The same annoying error occurs across them all.
Another super cool "feature" is that Mercury Playback Engine capabilities come and go as they please. Sometimes they work for Premiere or Media Encoder or After Effects, but sometimes they just pick one for that given day and don't let the other apps playback. All of the systems GPU were working just fine in 7.0.1, but now wtf Adobe?
My system specs are varied, but the general idea is this:
Mac Pro systems (4,1-5,1) 2.3GHz - 2.93GHz
16-24GB RAM
Nvidia QuadroFX 4800, Nvidia QuadroFX 4000, Nvidia GeForce 9800
OS X 10.7.4 and 10.7.5
A few of the systems have AJA Kona 3 and Kona 3G
Most of the media is being accessed across 10gigE to a ProMax Platform, and the project files are local on SSD's.
I have the bug report from Apple, so if that helps let me know so I can get that info to someone who cares.Hi Kevin,
I'm still planning on attempting the 10.8.5 install on one of the affected systems. In the process, I have uncovered a new issue related to the CUDA acceleration not being there at all on a system that used to have it. That particular Mac Pro system only has a GeForce GT120, but the point is that in CS6 and CC, the CUDA was working until this latest update. The other systems have QuadroFX 4000 and 4800 cards, so those seem to be getting CUDA playback, however it is intermittent.
As for the OS X 10.7.4 not allowing me to install 7.1... That is correct. The Creative Cloud Desktop app was failing updating itself (as it still does on every "update") quite a bit, I don't remember any specific messages, but I did see somewhere along the process that I wasn't able to install the Premiere 7.1 update with my 10.7.4. One of the systems here is have a ton of issues with AE, but that's a whole new thread I think. I will attach some of those errors for kicks, but all of these problems occured with the introduction of the virus that is Creative Cloud into our working environment.
I am working with a wide variety of media: R3D, 5D, F55 4K XAVC, Canon C-300, XDCAM EX, FS-100, ProRes. The projects that I've been having the most issues with lately has the Canon C-300 .MXF media mixed with 5D h.264 as a 2 camera multi-cam set up. The other project that was giving me a lot of trouble right when I installed the Premiere 7.1 update was R3D and F55 4K XAVC. Both issues were the "A Serious Error has occurred. Premiere will try and save your project" vague warning. I usually only lost work since the last Autosave 20 minute interval, but sometimes that is a lot of work and when it happens 10 times in one day, that is unacceptable.
Here are some answers to some more of those questions:
What other software are you running?
These are all possible conflicting software (IMO) that are installed:
Final Cut Studio 3
Avid Symphony 6.0.3
Cinema 4D R14
RED CineX
Davinci Resolve
Nuke7
Adobe CS5.5 and CS6 are still installed
Do you have any third-party effects or codecs installed?
Yes. Trapcode Suite, Primatte, lots of scripts in After Effects. Lots of codecs installed from Sony, Avid, RED, Canon, etc.
I think I've answered most of the other questions in this thread, but hopefully that helps. I will update when I'm able to get 10.8.5 installed. I suppose a clean install of 10.7.5 perhaps might have the same chances of fixing this as well.
Here is the Premiere Error:
Here are a series of AE errors, that might need their own thread: -
This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide -
Project Server 2010 - Project Center: An unknown error has occurred
Hi,
We have an issue where project center is throwing 'An unknown error has occurred' error message. Searching the ULS logs provides this;
12/01/2011 11:48:11.53 w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected Detected use of SPRequest for previously closed SPWeb object. Please close
SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace: at Microsoft.SharePoint.SPWeb.get_CurrentUser() at Microsoft.Office.Project.PWA.PJContext.get_RegionalSettings()
at Microsoft.Office.Project.PWA.PJContext.get_LocaleCulture() at Microsoft.Office.Project.PWA.WCFContext.AuthenticateUser(Message message, WCFContext& wcfContext, String userName, Boolean isWindowsUser) at
Microsoft.Office.Project.PWA.WCFContext.GetContext(Message message, String userName, Boolean isWindowsUser, Boolean newCookie, Uri originalTargetUri) at Microsoft.Office.Project.Server.ProjectServerRouter.Microsoft.Office.Project.Server.IProjectServerRouter.ProcessMessage(Message
me... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected ...ssage) at SyncInvokeProcessMessage(Object , Object[]
, Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc&
rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet) at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(RequestConte... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected ...xt request, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result) at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.ServiceModel.AsyncResult.Complete(Boolean
completedSynchronously) at System.ServiceModel.Channels.InputQueue`1.AsyncQueueReader.Set(Item item) at System.ServiceModel.Channels.InputQueue`1.EnqueueAndDispatch(Item item, Boolean canDispatchOnThisThread)
at System.ServiceModel.Channels.InputQueue`1.EnqueueAndDispatch(T item, ItemDequeuedCallback dequeuedCallback, Boolean canDispatchOnThisThread) at System.ServiceModel.Channels.InputQueueChannel`1.EnqueueAndDispatch(TDisposable item,
ItemDequeuedCallback dequeuedCallback,... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected ... Boolean canDispatchOnThisThread) at System.ServiceModel.Channels.SingletonChannelAcceptor`3.Enqueue(QueueItemType
item, ItemDequeuedCallback dequeuedCallback, Boolean canDispatchOnThisThread) at System.ServiceModel.Channels.SingletonChannelAcceptor`3.Enqueue(QueueItemType item, ItemDequeuedCallback dequeuedCallback) at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext
context, ItemDequeuedCallback callback) at System.ServiceModel.Activation.HostedHttpTransportManager.HttpContextReceived(HostedHttpRequestAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.ServiceModel.PartialTrus... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected ...tHelpers.PartialTrustInvoke(ContextCallback callback, Object state)
at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequestWithFlow(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()
at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32
errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UIn... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.53* w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
General 90hv Unexpected ...t32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)
at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.54 w3wp.exe (0x1A98) 0x15A0 SharePoint Foundation
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://servername:32843/f78ead39833941f4911623b393bd511f/PSI/PWA.svc'
Channel: 'System.ServiceModel.Channels.IRequestChannel' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/ProjectGetProjectCenterProjectsForGridJson' MessageId: 'urn:uuid:05d10069-fa3b-4f09-8a7b-1ba900608c5a' 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.56 w3wp.exe (0x05D4) 0x1EF4 SharePoint Foundation
Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://servername.domainname:32843/f78ead39833941f4911623b393bd511f/PSI/PWA.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/ProjectGetProjectCenterProjectsForGridJson' MessageId: 'urn:uuid:05d10069-fa3b-4f09-8a7b-1ba900608c5a' 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.56 w3wp.exe (0x05D4) 0x1EF4 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61 w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception Exception occurred in method Microsoft.Office.Project.Server.BusinessLayer.Project.ProjectGetProjectCenterProjectsForGridJson
Microsoft.Office.Project.Server.DataAccessLayer.FilterDal+FilterException: Error during filter query execution. Query: declare @ResUid UniqueIdentifier; set @ResUid = 51924808-f1b5-45b1-81d6-01f4e314df4b; declare @PermUid
UniqueIdentifier; set @PermUid = a120a079-75bc-4f0f-b376-3fb0ae9ac940; declare @ViewUid UniqueIdentifier; set @ViewUid = 63d3499e-df27-401c-af58-ebb9607beae8; declare @P0 Int; set @P0 = 5; SET NOCOUNT ON SELECT
T.PROJ_UID INTO #T0 FROM dbo.MSP_PROJECTS AS P INNER JOIN dbo.MSP_TASKS AS T ON T.PROJ_UID = P.PROJ_UID INNER JOIN dbo.MSP_RESOURCES AS R ON R.RES_UID = P.WRES_UID
LEFT JOIN dbo.MSP_WORKFLOW_STATUS AS WFS... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ...TS ON WFSTS.PROJ_UID = P.PROJ_UID INNER JOIN dbo.MSP_WEB_FN_SEC_GetAllProjectsResCanViewByViewID(@ResUid,
@PermUid, @ViewUid, 3) AS perm ON perm.PROJ_UID = T.PROJ_UID WHERE T.TASK_OPTINDX = 1.0 AND (ISNULL(WFSTS.STAGE_STATUS,-1) IN (-1, 1,2,3,5,6)) AND ((P.PROJ_TYPE <> @P0) OR (P.PROJ_TYPE IS NULL)) CREATE CLUSTERED
INDEX PK_#T0 ON #T0 (PROJ_UID) SET NOCOUNT OFF SELECT T.PROJ_UID , P.PROJ_NAME , T.TASK_START_DATE ,
T.TASK_FINISH_DATE , T.TASK_PCT_COMP , T.TASK_WORK , T.TASK_DUR , R.RES_NAME , P.WPROJ_LAST_PUB ,
P.PROJ_OPT_MINUTES_PER_DAY , P.PROJ_OPT_MINUTES_PER_WEEK , P.PROJ_OPT_DAYS_PER_MONTH , T.TASK_SUMMARY_PROGRESS_DATE , T.TASK_IS_MILESTONE
, dbo.MSP_FN_HYPERLINK_HREF(T.TASK_HYPERLINK_ADDRESS,... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ... T.TASK_HYPERLINK_SUB_ADDRESS) AS TASK_HYPERLINK_HREF ,
T.TASK_OUTLINE_LEVEL , P.PROJ_TYPE , T.TASK_DUR_FMT , P.WSTS_SERVER_UID , P.PROJ_OPT_CURRENCY_CODE , P.PROJ_ACTIVE_RISK_COUNT
, P.PROJ_ACTIVE_ISSUE_COUNT , P.PROJ_TOTAL_DOC_COUNT , WOB.WOBJ_ISSUE_REF_CNT , WOB.WOBJ_RISK_REF_CNT , WOB.WOBJ_DOC_REF_CNT
, PJSYNC.SYNC_WSS_LIST_UID , T.TASK_COMPLETE_THROUGH , (CASE WHEN T.TASK_UID=T.TASK_PARENT_UID THEN 1 ELSE 0 END) AS TASK_IS_PROJECT_SUMMARY FROM dbo.MSP_PROJECTS
AS P INNER JOIN dbo.MSP_TASKS AS T ON T.PROJ_UID = P.PROJ_UID INNER JOIN dbo.MSP_RESOURCES AS R ON R.RES_UID = P.WRES_UID LEFT JOIN dbo.MSP_WORKFLOW_STATUS AS WFSTS ON WFSTS.PROJ_UID
= P.PROJ_UID INNER JOIN #T0 AS keys ON keys.PROJ_UID = P.P... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ...ROJ_UID LEFT JOIN (SELECT WOBJ_PROJ_UID as PROJ_UID,[4]
as WOBJ_ISSUE_REF_CNT, [5] as WOBJ_RISK_REF_CNT, [3] as WOBJ_DOC_REF_CNT FROM ( SELECT WOBJ_TYPE,
WOBJ_PROJ_UID FROM MSP_WEB_OBJECTS WHERE WOBJ_TASK_UID='00000000-0000-0000-0000-000000000000') pwob
PIVOT (COUNT(WOBJ_TYPE) FOR WOBJ_TYPE in([3] ,[4],[5])) AS pvt) AS WOB ON WOB.PROJ_UID = P.PROJ_UID LEFT JOIN dbo.MSP_SYNC_PROJECT_SETTINGS AS PJSYNC ON PJSYNC.PROJ_UID = P.PROJ_UID WHERE T.TASK_OPTINDX = 1.0
AND (ISNULL(WFSTS.STAGE_STATUS,-1) IN (-1, 1,2,3,5,6)) DROP TABLE #T0; ---> System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique,
or foreign-key constraints. at System.Data.DataSet.Enable... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ...Constraints() at System.Data.DataSet.set_EnforceConstraints(Boolean
value) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.FillTypedDataSet(Boolean allowCache, DataSet typedDataSet, String[] tables, SqlCommand sqlCommand, Boolean enforceConstraints) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.FillTypedDataSet(DataSet
typedDataSet, String[] tables, SqlCommand sqlCommand, Boolean enforceConstraints) at Microsoft.Office.Project.Server.DataAccessLayer.FilterDal.FillDataSet(QueryState queryState) --- End of inner exception stack
trace --- at Microsoft.Office.Project.Server.DataAccessLayer.FilterDal.FillDataSet(QueryState queryState) at Microsoft.Office.Project.Server.Utility.FilterDalQueryInfo.Query() at Microsoft.Office.Project.Se... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ...rver.BusinessLayer.Project.ProjectQueryInfo.Query()
at Microsoft.Office.Project.Server.BusinessLayer.Project.ProjectCenterQueryInfo.Query() at Microsoft.Office.Project.Server.Utility.JsGridPopulationManager.InitializeSerializer(TableQueryInfo tableInfo, OrderInfo orderInfo, SliceInfo
sliceInfo, Guid groupSchemeUid, Nullable`1 ganttSchemeUid, Boolean serializeStyles, Func`1 getChanges, Boolean serializeUnfilteredHierarchy, Boolean serializeLookupTableInfo, Boolean showTimeWithDates, String rowFilter) at Microsoft.Office.Project.Server.Utility.JsGridPopulationManager.InitializeSerializer(TableQueryInfo
tableInfo, ViewPropertyGroup properties, JsGridSerializerArguments gridSerializerArgs, Func`1 getChanges) at Microsoft.Office.Project.Server.BusinessLayer.Project.GetProjectCen... 18800f49-4909-4e4d-8130-6ead4d554598
12/01/2011 11:48:11.61* w3wp.exe (0x05D4) 0x1EF4 Project Server
General 0000 Exception ...terProjectsForGridJson(JsGridSerializerArguments gridSerializerArgs, Guid viewUid,
Int32 store, Boolean showInsertedProjects, Boolean clearPersistedProperties) at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.ProjectGetProjectCenterProjectsForGridJson(JsGridSerializerArguments gridSerializerArgs, Guid
viewUid, Int32 store, Boolean showInsertedProjects, Boolean clearPersistedProperties) 18800f49-4909-4e4d-8130-6ead4d554598
I have searched the internet but most similar issues revolve around the resource center. I did find one person who just backed up the databases and provisioned a new site with success, but this has not worked. I am using the farm admin account, but all users
get this issue.
Any one got any ideas?
Rob HardyBit further now.
It seems one of the project won't publish, and produces this error;
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
<class name="ActiveCacheQueuedMessageExecutionError">
<error id="12005" name="ActiveCacheQueuedMessageExecutionError" uid="53d5e6c5-be41-47c8-b336-2e472b99d142" error="System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_PROJECT_RESOURCES'. Cannot insert duplicate
key in object 'dbo.MSP_PROJECT_RESOURCES'.
Violation of PRIMARY KEY constraint 'PK_MSP_PROJECT_RESOURCES'. Cannot insert duplicate key in object 'dbo.MSP_PROJECT_RESOURCES'.
The statement has been terminated.
The statement has been
terminated.
 at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
 at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)

at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
 at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader
ds, RunBehavior runBehavior, String resetOptionsString)
 at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
 at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
 at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)

at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
 at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.ExecuteStoredProcedureNoResult(String storedProcedureName, SqlParameter[] parameters)
 at Microsoft.Office.Project.Server.DataAccessLayer.WinProjDal.ExecuteStoredProcedure(String
spName, SqlParameter[] parameters)
 at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjUtility.ExecuteP12QueueableSPCommand(WinProjTraceContext wpTraceContext, DataStoreEnum store, P12QueueableSPCommand command, Boolean
retry, Boolean useTransaction)
 at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjQueueMessageDispatcher.DispatchMessage(ACMessage acMessage, Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext)"/>
</class>
<class name="Queue">
<error id="26000" name="GeneralQueueJobFailed" uid="65e11595-30af-4be7-a9d0-ec767c880cc7" JobUID="c348fb86-d807-4b06-abaa-81fcbcbc94f3" ComputerName="SERVERNAME" GroupType="ACProjectSave" MessageType="Byte[]" MessageId="8" Stage=""/>
</class>
</general>
</errinfo>
Anyone seen this? If I delete this project the project center loads. Obvisouly I don't want to do that though!
Rob Hardy -
HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.
I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
I need more INPUT (not MENU) languages in my E90!
Though E90 Communicator is awesome in majority of functions, usability and comparatively perfect in production quality, it lacks some features that I as business-user definitely need. The most disappointing issue for me is the language issue. While t
-
How do I access kernels or process files on my IPhone
My new IPhone has been taken over by someone. There are processes running on my phone that have been initiated by someone with APPLEAUTHAGENT. They are using Cloud Key Chain Pro and are monitoring everything on my phone as well as using my wifi and d
-
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders. I export from Poser Pro Game Dev to Png Image Sequence. I organise a cam angle in After Effects...I re ren
-
Why Adobe Flash Player 11.3 r300 not working appropriately in Firefox 13.0?
Windows 7 Ultimate SP1 64bits Pt-Br Firefox 13.0 (Adobe Flash Player Plug-in) 11.3 r300 IE9 (Adobe Flash Player Active-x) 11.3 r300 In time: In both browsers (Firerox and IE9) Adobe Flash Player is slower than normal and in Firerox sometimes it cras
-
Hello. my email [email protected] witch is my apple ID is deactivated from Hotmail and I cant remember my Icloud password so I cant recover it I would like to access my iphone but icloud pass is preventing me what can I do plz help !! i can't remembe