A report to show 2008 Customer Sales by State.
My customer needs a report to show 2008 Customer Sales by State. I don't see any SAP reports that will do this. Is the state held in any of the document files that I could use to create a query?? Or does anyone have a query that reports this information?
Try using following query:
SELECT T0.CardCode, T0.CardName, T0.DocNum, T0.DocDate, T0.DocTotal, T1.State
FROM OINV T0
INNER JOIN CRD1 T1 ON T0.CardCode = T1.CardCode
AND T0.ShipToCode = T1.Address
Though A/R Invoice, does not store the state code separately, it does store the addresscode, which was used for shipping, which could be linked to the Addresses table. Though if the user changes the address manually, than there is no other way, but to do some programming and find the address name, though it will be pretty difficult, because users might not always be correct with their spellings.
Rahul
Similar Messages
-
Report to show the followup sales documents and items
Sales had executed many sales quotations with customers over a period of time.
Now the Sales Staff wanted to know how many sales documents and what/how many sales items are being purchased by the customer with respect to the quotation.
Is there a report that list out the sales documents and items created w/respect to a particular quotation instead of looking at the document flow which is difficult to diagnose.
Thankshello, friend.
you can try table VBFA, where you can see sales documents and their subsequent documents.
for a general listing of quotations, use tcode VA25.
regards. -
Create a report to show changes in Sales Order Due Dates
Hello all,
I've recently started using SAP Business One 8.8 and I want to run a report to show a list of Sales Orders with the original Sales Order Due Date, and the New Date that it has been changed to. What is the best way to create a report to show me this?
thanks
LeighHi Leigh.......
Try this......
Select T0.DocNum, Max(T1.UpdateDate) 'Last Update', T0.DocDueDate
from ADOC T0
JOIN ADOC T1 on T1.DocNum = T0.DocNum AND T1.ObjType = '17'
where T0.ObjType = '17'
Group By T0.DocNum, T0.DocDueDate
Regards,
Rahul -
Oracle tax reports to show exempt non exempt for states
Hello
is there any standard oracle report to show taxability of states in USA and Canada (exempt/non exempt status)
If so please give the report name and please advise on the name of the responsibility to use to run the report.
thanks
kpHello
is there any standard oracle report to show taxability of states in USA and Canada (exempt/non exempt status)
If so please give the report name and please advise on the name of the responsibility to use to run the report.
thanks
kp -
Report That Shows Customer Sales By Product
Hello All --
Where can I go to find a list of customers that have purchased a specific product. The Sales Analysis by Item is similar to what I need but it just shows the amt of sales generated by the item. Does not show any customer info.
I would like to be able to select a product by Style #. We have have colors and sizes associated with each style. We do not need to be able to choose specific Style/Color/Size. Generally, we just want to know which customers purchased a particular Style # - Color and Size is not relevant for what we want from this report.
Then based on the Style # selected, which is the first four digits of our Item Code, the report would generate a list of our customers that have purchased this item in the past.
So...would look like:
Style #...Customer...Contact...Phone...Qty Purchased...Date
FYI -- an example of a report that summarizes our Styles -- i.e., consolidates the color and sizes into the Style # -- is shown below.
SELECT Distinct SubString(t0.ItemCode,1,4) 'Style #', Sum(T0.InQty - T0.OutQty) 'Total Items', Sum(T0.InQty - T0.OutQty) *Avg(Case When T1.LastPurPrc = 0 then t2.AvgPrice else T1.LastPurPrc end) 'Total Cost', Avg(Case When T1.LastPurPrc = 0 then T2.avgprice else T1.LastPurPrc end) 'Most Recent Item Cost'
FROM OINM t0
Inner Join OITM T1 on T1.ItemCode =T0.ItemCode
Inner Join OITW T2 on T2.ItemCode = t0.ItemCode
WHERE T0.DocDate <= '[%0]' and T0.InQty != T0.OutQty
Group By SubString(t0.ItemCode,1,4)
Order By SubString(t0.ItemCode,1,4)
Any thoughts?!
Thanks!!
MikeHi Guys --
Thanks for the help.
Bishal -- looks like your suggestion should pretty much get me what I need.
Suda -- the Query I posted as an example works fine for its purpose - summary report of sales by product style. I just posted it as an example of what I was trying to explain re: grouping colors and sizes together and showing data just by style.
Original thought I had in mind (before trying out Bishal's suggestion) was to just list list one Style (one I select) and columns next to it would show the customers and qty purchased by that customer. Forgot about the diff contact person - you're right about that.
Thanks!
Mike -
Report to show customer without sales rep
Dear Experts.
Is there anyway or any report to show customer that don't have sales rep tag to it in Partner Function?Hi Nehemiah -
I know this is very painful but if volume of customer is less then use following method -
1.Extract all Sold to Party's and their sales area in separate sheet
2.Create a query joining KNA1 and KNVP where partner function (PARVW) = PE ( or partner function of Sales Rep).Download Sold to and its sales area in another sheet.
3.Now using excel compare both sheets by Vlookup and extract the customers from Step 1 which are not present in Step 2.
If the volume of customer is very large,then we can also use MS Access Queries otherwise we can simply write an ABAP Program.
Let us know, if you need more explanation on any of the method explained above.
Thanks & Regards
Amit Gupta -
VL10E report should show only sales order with complete stock
Hello Friends,
I have to make-to-order scenario. While creating a sales order the system proposes a delivery date based on the inhouse production day maintained in the material master.
In VL10E the system gives list of Sales Order for which delivery is due on that particular date. It does not check whether actually the material is really available on that date for the concerned sales order.
Is there any scope ( any config change or user_exit) which will show only the sales order with complete stock confirmed through production order in the VL10E report.
Regards
DebeshHi,
Check userexit LV50R_VIEWG02. If CF_SUBRC = 1 you will not see it in the list. For this purpose in the interfase you have the information in IS_VBEP. Set a break-point and check the conditions.
For more info check the Note 198137 - VL10: Customer-specific enhancements / user exits
I hope this helps you
Regards
Eduardo -
Dear Experts,
i need report show me the customer and the sales rep which belong to him
colud you provide me?
Thanks
AmirHi Amir
Check these standard reports .
MCTA --- Customer Analysis
MC+E --- Customer Sales Volume
MC+I --- Customer Credit Memos
MC(Q --- Sales Employee, Incoming Orders
MC-M --- Sales Employee Returns
MC-Q --- Sales Employee Sales Volume
MC-U --- Sales Employee Credit Memos
Regards
Srinath -
Do we have standard report to show sale order stock with amount?
Do we have standard report to show sale order stock with amount?
I try to use MB5B and MBBS but they don't show value.
MB5B show only qty
MBBS no any report.
Please kindly help.
Thank you very much.Okay Thank you very much for your suggestion.
I think I have to create a new ZProgram. T_T -
Closed Third party Sales order still showing on Customer credit exposure
Hi,
We had earlier closed the status for a partially Invoiced Third party Sales order ,where Goods Receipt quantity was more than the PO and Customer Sales order quantity from Being Processed to completed through a Z transaction.
The payments for all the quantities delivered to the customers have been received for this particular third party order,but the value of one of the sales order item is showing as an exposure in the customer credit account.
Since there is no outstanding amount for this Sales order,How can this be resolved so as to this Sales order item amount should not appear in Customer credit account?
Inputs regarding this would be appreciated.
Regards
Mohammed RoshanHi Jurijs,
Have you checked LVKMPFZ1, LVKMPFZ2 & LVKMPFZ3 to find out if there is any code for credit checks and blocks in these user exits. Also please check FORM USEREXIT_AVAIL_CHECK_CREDIT under include MV45AFZF to find out if there is any code which is entered to not allow the availability check for blocked sales orders and therefore stopping the transfer of requirements inthe form of PR generation.
Don't worry about going into ECC 6.0. Once you will start the upgrade process on ECC 6.0, you will come to know a set of transaction codes which you can run into the system to find out the non standard ABAP code changes which exists in your SAP landscape. -
Hi
Is there any report in SAP to know the customer wise sales order peport.
we need to konw customer wise sales orders report period wise. how many salea orders we booked for the customer wise.
EX: Customer No Customer Name Total Sales order(Total of sales orders).
Plase let me know any report available for this kind of information.
Thanks
RaoDear Rao,
I think, none of above suggested reports will ful-fill your requirement.
Customer No.---Customer Name - Sales Order Nos.--SO Value
And this data, needs to be fetched, based up on period, as entered by user.
There are some other factors, need to be considered, as:
Whether or not, Rejected/ Return Order values, need to be detected from originally booked SO amount, in to the report.
In my opinion, you must have to go for Z-development.
Write-down your functional specification for Report-requirement and discuss the same with ABAPer, from where values (Table-Field) needs to be captured and what are all check-points need to be coded-down.
Best Regards,
Amit -
How to add more fields to Customer sales report
I want to add some fields to customer sales report generating through S_ALR_87012186 like,Invoice number,Invoice date,Tax registration number,tax amount,before tax amount..etc.
Please let us know the best possible method to add these details.It is not suggested to alter a standard SAP report. Still if the requirement persists, then copy the standard program into a zprogram and add required fields.
-
Customer sales report by customer category
Hi to all,
as we have maintained a price lists customer wise and the attached the customer according to its category.so when i apply a price change to a specific category it ill automatically applicable to all the customer under this category.
now my question is that can i have a sales report as per the customer category instead of puttting individual customer codes to execute the report?
thanks
AttiqDear JP the error is "no condition record exist for this selection"
but if i am not wrong this is a pricing report not the sales report,i need sales report.
thanks. -
Report that shows material master record with sales text
We have a requirement to pull the material number along with the material sales text from the material master. Does a standard report exist that includes the sales text (from the sales text tab in the material master record?)
Thanks in advance.Hi,
There are not any SAP Standard Report.
The item texts are stored in table
STXL - STXD SAPscript text file lines
You need to retrieve the Text maintained using the Function module
READ_TEXT
goto SE37 , & Click on test enter the details
Text Object MATNR
Text Name 6000000376
Text ID 0001
Language EN
And execute the Text maintain in the Text ID - 0001 - Sales Text will be retrieved. -
Hi!
I am unable to get the result for my one of the item as checkbox. Other two are working properly .Please check and let me know wheres the problem please.
***INCLUDE ZSD_CONTRACT_LIST_T01_RENTAL1 .
TABLES: vbak, vbap, wbrk, zsdsched,vbkd, fplt, fpla, tvlvt.
TYPE-POOLS: slis.
data: BEGIN OF gt_report occurs 0,
vbeln LIKE vbak-vbeln, "Sales Document
posnr LIKE vbap-posnr, "Item
ernam LIKE vbak-ernam, "Created by
erdat LIKE vbak-erdat, "Created on
audat LIKE vbak-audat, "Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document type
vkorg LIKE vbak-vkorg, "Sales Org
vtweg LIKE vbak-vtweg, "Distribution Channel
spart LIKE vbak-spart, "Division
vkbur LIKE vbak-vkbur, "Sales Office
guebg LIKE vbak-guebg, "Valid from date
gueen LIKE vbak-gueen, "Valid to date kunnrt LIKE kna1-name1, "Sold-to Name
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
kunnr LIKE vbak-kunnr, "Sold-to party
kunnrt LIKE kna1-name1, "Sold-to Name
kvgr4 LIKE vbak-kvgr4, "Territory
matnr LIKE vbap-matnr, "Material
arktx LIKE vbap-arktx, "Material Short Text
charg LIKE vbap-charg, "Batch
matkl LIKE vbap-matkl, "Material Group
pstyv LIKE vbap-pstyv, "Item Category
zmeng LIKE vbap-zmeng, "Target Quantity
zieme LIKE vbap-zieme, "Target Unit
kdmat LIKE vbap-kdmat, "Customer Material Number
werks LIKE vbap-werks, "Plant
lgort LIKE vbap-lgort, "Storage Location
vstel LIKE vbap-vstel, "Shipping Point
route LIKE vbap-route, "Route
netpr LIKE vbap-netpr, "Net Price
kpein LIKE vbap-kpein, "Condition Price Unit
kmein LIKE vbap-kmein, "Condition Unit
shkzg LIKE vbap-shkzg, "Returns Item
oidrc LIKE vbap-oidrc, "DRC Code
kunwe LIKE vbap-oid_ship, "Ship-to
aufnr LIKE vbap-aufnr, "Order Number
vkaus LIKE vbap-vkaus, "Usage
kunwet LIKE kna1-name1, "Ship-to Name
zzwprofid LIKE vbap-zzwprofid, "Waste Profile ID
kunre LIKE wbrk-kunre, "Bill-to
kunret LIKE kna1-name1, "Bill-to Name
addl_schd LIKE icon-id, "Push Button For addl line
datab LIKE zsdsched-datab, "Valid-From Date
datbi LIKE zsdsched-datbi, "Valid To Date
zschdfreq LIKE zsdsched-zschdfreq, "Contract schedule frequency
frequency LIKE zsdsched-frequency, "Frequency
monday LIKE zsdsched-monday, "Mondays
tuesday LIKE zsdsched-tuesday, "Tuesdays
wednesday LIKE zsdsched-wednesday, "Wednesdays
thursday LIKE zsdsched-thursday, "Thursdays
friday LIKE zsdsched-friday, "Fridays
saturday LIKE zsdsched-saturday, "Saturdays
sunday LIKE zsdsched-sunday, "Sundays
dzieme LIKE zsdsched-dzieme, "Target quantity UoM
comments LIKE zsdsched-comments, "Comments
END OF gt_report.
data: Begin of gt_report1 occurs 0,
fksaf LIKE fplt-fksaf,
afdat LIKE fplt-afdat,
fakwr LIKE fplt-fakwr,
fkdat LIKE fplt-fkdat,
nfdat LIKE fplt-nfdat,
fpart LIKE fpla-fpart,
bedat LIKE fpla-bedat,
endat LIKE fpla-endat,
horiz LIKE fpla-horiz,
bezei LIKE tvlvt-bezei,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
ernam LIKE vbak-ernam,
guebg LIKE vbak-guebg,
gueen LIKE vbak-gueen,
auart LIKE vbak-auart,
kunnr LIKE vbak-kunnr,
kvgr4 LIKE vbak-kvgr4,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
vtweg LIKE vbak-vtweg,
vbtyp LIKE vbak-vbtyp,
name1 LIKE kna1-name1,
pstyv LIKE vbap-pstyv,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
oid_ship LIKE vbap-oid_ship,
kpein LIKE vbap-kpein,
kmein LIKE vbap-kmein,
netpr LIKE vbap-netpr,
kdmat LIKE vbap-kdmat,
posnr LIKE vbap-posnr,
matkl LIKE vbap-matkl,
aufnr LIKE vbap-aufnr,
vkaus LIKE vbap-vkaus,
route LIKE vbap-route,
kunre LIKE wbrk-kunre, "Bill-to
kunwe LIKE vbap-oid_ship, "Ship-to
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
End of gt_report1.
data: gs_report LIKE LINE OF gt_report,
gs_report1 LIKE LINE OF gt_report1,
gt_sched TYPE TABLE OF zsdsched,
gt_sched_tmp TYPE TABLE OF zsdsched,
gs_sched TYPE zsdsched,
gt_sel LIKE gt_report OCCURS 0,
gt_sel1 LIKE gt_report1 OCCURS 0,
gt_vbpa TYPE TABLE OF vbpa,
gs_vbpa TYPE vbpa,
gv_auart TYPE auart,
gv_counter TYPE i.
**-- ALV variables
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort TYPE slis_sortinfo_alv, "Sorting list
gt_sort TYPE slis_t_sortinfo_alv, "Sort
gs_layout TYPE slis_layout_alv, "List Layout
gs_variant TYPE disvariant, "Display Variant
gv_repid LIKE sy-repid,
gv_save(1) TYPE c,
ls_fieldcat1 TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat1 TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort1 TYPE slis_sortinfo_alv, "Sorting list
gt_sort1 TYPE slis_t_sortinfo_alv, "Sort
gs_layout1 TYPE slis_layout_alv, "List Layout
gs_variant1 TYPE disvariant, "Display Variant
gv_repid1 LIKE sy-repid,
gv_exit(1) TYPE c.
CONSTANTS: gc_a TYPE c VALUE 'A',
gc_g TYPE c VALUE 'G',
gc_re(2) TYPE c VALUE 'RE'.
Screen-control Variables
CONTROLS:
tctrl_sched TYPE TABLEVIEW USING SCREEN 1010. " Schedule lines.
*& Report ZSD_CONTRACT_LIST
*& Created on: January 21, 2007
*& Description: List of Contracts - ALV
REPORT zsd_contract_list_rental1.
INCLUDE zsd_contract_list_t01_rental1.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK m1 WITH FRAME TITLE text-t01.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t02.
SELECT-OPTIONS: s_vkorg FOR vbak-vkorg MEMORY ID vko,
s_vtweg FOR vbak-vtweg MEMORY ID vtw,
s_spart FOR vbak-spart MEMORY ID spa,
s_vkbur FOR vbak-vkbur MEMORY ID vkb.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_erdat FOR vbak-erdat,
s_ernam FOR vbak-ernam,
s_guebg FOR vbak-guebg,
s_gueen FOR vbak-gueen,
s_auart FOR gv_auart MEMORY ID vta
MATCHCODE OBJECT h_vakz,
s_fkarv FOR fplt-fkarv.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
s_kunnr FOR vbak-kunnr,
s_kunwe FOR vbap-oid_ship,
s_kunre FOR wbrk-kunre.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: s_werks FOR vbap-werks MEMORY ID wrk,
s_lgort FOR vbap-lgort MEMORY ID lag,
s_vstel FOR vbap-vstel MEMORY ID vst,
s_route for vbap-route,
s_matnr FOR vbap-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t04.
PARAMETERS: p_varia TYPE disvariant-variant MEMORY ID wrk,
p_all AS CHECKBOX DEFAULT 'X',
p_group AS CHECKBOX DEFAULT 'X',
p_rental AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK m1.
Start of Selection
START-OF-SELECTION.
PERFORM get_data.
Display ALV
END-OF-SELECTION.
IF gt_report[] IS INITIAL.
MESSAGE s419(brain).
ELSE.
PERFORM create_alv.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varia.
PERFORM f01_f4_variant CHANGING p_varia.
*& Form get_data
text
FORM get_data .
select the appropriate rental data.
IF p_rental IS NOT INITIAL AND ( ( p_all IS INITIAL ) AND ( p_group IS INITIAL ) ).
SELECT avbeln aerdat aernam aaudat avbtyp aauart a~vkorg
avtweg aspart avkbur aguebg agueen akunnr a~kvgr4
bpstyv bmatnr bwerks boid_ship bkpein bkmein
bnetpr bkdmat bposnr bmatkl baufnr bvkaus b~route
dbezei efkarv eafdat efakwr efkdat enfdat e~fksaf
ffpart fbedat fendat fhoriz flodat ftndat b~oid_ship AS kunwe
INTO CORRESPONDING FIELDS OF TABLE gt_sel1
FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INNER JOIN vbpa as c ON avbeln = cvbeln
INNER JOIN vbkd AS g ON avbeln = gvbeln
INNER JOIN fplt AS e ON gfplnr = efplnr
INNER JOIN fpla AS f ON efplnr = ffplnr
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr
AND e~fkarv IN s_fkarv
AND e~fksaf = 'A'
OR e~fksaf = 'B'.
sort gt_sel1.
*ENDIF.
IF NOT gt_sel1[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel1
WHERE vbeln = gt_sel1-vbeln
AND parvw = gc_re.
Loop through captured data for additional information
LOOP AT gt_sel1 INTO gs_report1.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
posnr = gs_report1-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report1-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report1-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunnr ).
gs_report1-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunwe ).
gs_report1-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
APPEND gs_report1 TO gt_report1.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report1.
*ENDIF.
ELSE.
IF ( ( p_all IS NOT INITIAL ) OR ( p_group IS NOT INITIAL ) ) AND p_rental IS INITIAL.
Select the appropriate contract data.
SELECT a~vbeln a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~oidrc b~oid_ship AS kunwe
b~zzwprofid c~datbi c~datab b~route
baufnr bvkaus d~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln AND
b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr.
SORT gt_sel.
ENDIF.
IF NOT gt_sel[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
endif.
Select the remaining records from the ZSDSCHED Table.
IF p_group IS NOT INITIAL.
SELECT * FROM zsdsched
INTO TABLE gt_sched
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND posnr = gt_sel-posnr.
SORT gt_sched.
ENDIF.
Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
IF NOT p_group IS INITIAL.
If we are grouping the lines add the icon button.
LOOP AT gt_sched INTO gs_sched WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
IF gv_counter > 0.
gs_report-addl_schd = '@1E@'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING gs_sched TO gs_report.
ADD 1 TO gv_counter.
ENDLOOP.
ELSE.
Otherwise get the rest of the schedule information
READ TABLE gt_sched INTO gs_sched
WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
datbi = gs_report-datbi
datab = gs_report-datab.
IF sy-subrc = 0.
MOVE-CORRESPONDING gs_sched TO gs_report.
ENDIF.
ENDIF.
APPEND gs_report TO gt_report.
ENDLOOP.
Remove any duplicates from the reporting table
DELETE ADJACENT DUPLICATES FROM gt_report.
If Show all records is initial, delete non-scheduled lines (ex. Sub-items)
IF p_all IS INITIAL.
DELETE gt_report WHERE datbi = 0
AND datab = 0.
ENDIF.
endif.
endif.
ENDFORM. " get_data
*& Form create_alv
text
FORM create_alv .
if ( ( p_all is not initial ) or ( p_group is not initial ) ) and p_rental is initial.
PERFORM initialize_fieldcat USING gt_fieldcat[].
PERFORM populate_layout CHANGING gs_layout
gs_variant.
PERFORM populate_sort USING gt_sort[].
PERFORM display_alv_report.
else.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
PERFORM initialize_fieldcat1 USING gt_fieldcat1[].
PERFORM populate_layout1 CHANGING gs_layout1
gs_variant1.
PERFORM populate_sort1 USING gt_sort1[].
PERFORM display_alv_report1.
*endif.
*endif.
ENDFORM. " create_alv
*& Form initialize_fieldcat
Get and enhance the field catalog data
-->L_FIELDCAT[] text
FORM initialize_fieldcat USING l_fieldcat TYPE slis_t_fieldcat_alv.
IF p_rental IS NOT INITIAL .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ENDIF.
ENDIF.
ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
FORM populate_layout CHANGING gs_layout TYPE slis_layout_alv
gs_variant TYPE disvariant.
gs_layout-colwidth_optimize = 'X'.
gs_layout-allow_switch_to_list = 'X'.
gs_layout-zebra = 'X'.
gs_variant-report = sy-repid.
ENDFORM. " populate_layout
*& Form populate_sort
text
-->l_SORT[] text
FORM populate_sort USING l_sort TYPE slis_t_sortinfo_alv.
ENDFORM. " populate_sort
*& Form display_alv_report
FORM display_alv_report .
gv_repid = sy-repid.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_report
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ELSE.
IF p_rental IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = GT_REPORT1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endif.
endif.
ENDFORM. " display_alv_report
*& Form initialize_fieldcat1
Get and enhance the field catalog data for rental fields
-->L_FIELDCAT[] text
*FORM initialize_fieldcat1 USING l_fieldcat1 TYPE slis_t_fieldcat_alv.
**if ***
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
**else.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
***endfi.
*ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
*FORM populate_layout1 CHANGING gs_layout1 TYPE slis_layout_alv
gs_variant1 TYPE disvariant.
gs_layout1-colwidth_optimize = 'X'.
gs_layout1-allow_switch_to_list = 'X'.
gs_layout1-zebra = 'X'.
gs_variant1-report = sy-repid.
*ENDFORM. " populate_layout
***& Form populate_sort
text
-->l_SORT[] text
*FORM populate_sort1 USING l_sort TYPE slis_t_sortinfo_alv.
*ENDFORM. " populate_sort
***& Form display_alv_report
*FORM display_alv_report1 .
gv_repid = sy-repid.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'gt_sel1'
is_layout = gs_layout1
it_fieldcat = gt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort1
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant1
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_sel1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*endif.
*ENDFORM. " display_alv_report
*& Form f01_f4_variant
Get the Layout variant for the user.
FORM f01_f4_variant CHANGING c_variant TYPE disvariant-variant.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
it_default_fieldcat =
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f01_f4_variant
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE gt_report INTO gs_report INDEX rs_selfield-tabindex.
CHECK sy-subrc = 0.
CASE rs_selfield-fieldname.
WHEN 'VBELN'.
Set parameter ID for transaction screen field
CHECK NOT gs_report-vbeln IS INITIAL.
SET PARAMETER ID 'KTN' FIELD gs_report-vbeln.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
WHEN 'ADDL_SCHD'.
CHECK NOT gs_report-addl_schd IS INITIAL.
REFRESH gt_sched_tmp.
LOOP AT gt_sched INTO gs_sched
WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
APPEND gs_sched TO gt_sched_tmp.
ENDLOOP.
CHECK sy-subrc = 0.
CALL SCREEN '1010' STARTING AT 5 5.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
*& Module STATUS_1010 OUTPUT
text
MODULE status_1010 OUTPUT.
SET PF-STATUS 'MAIN_1010'.
SET TITLEBAR '1010' WITH gs_report-vbeln gs_report-posnr.
ENDMODULE. " STATUS_1010 OUTPUT
*& Module USER_COMMAND_1010 INPUT
text
MODULE user_command_1010 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1010 INPUTHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks
Maybe you are looking for
-
Windows 7 64 Bit black Screen when trying to got back to desktop
Hello, just bought my a new Imac and isntalled Windows 7 64 bit without any problems. When running a game under windows and i try to go back to the desktop with ALT+TAB or the windows key the screen gets black.I can still hear the game sound but i am
-
Sales/Use Tax - Automatic Account Assignment
Our use tax on an incoming Accounts Payable invoice gets automatically charged to a GL account. Is there a way to assign a profit center on that posting so that all postings to that GL account for that company are assigned to a profit center?
-
hi experts, i have this simple bean for inserting data into the database........................... // EmployeeDataBaseBean.java package wh; import java.lang.*; import java.sql.*; import javax.servlet.*; import javax.servlet.http.*; public class Empl
-
Best solution for finding and eliminating duplicate files? 10.8.3
Good morning. I just upgraded to 10.8.3 (from, 10.6.8) and have many external hard drives with tons of duplicate photos, music and general documents. I've been looking into what the best way is to pull all this together and have it all backed up in
-
Attaching movie clips to buttons
I would like to design a portfolio site in which I have small buttons that, when moused over, they display, a pic just above it. Each button triggers a different pic above it.