VL10E report should show only sales order with complete stock

Hello Friends,
I have to make-to-order scenario. While creating a sales order the system proposes a delivery date based on the inhouse production day maintained in the material master.
In VL10E the system gives list of Sales Order for which delivery is due on that particular date. It does not check whether actually the material is really available on that date for the concerned sales order.
Is there any scope ( any config change or user_exit) which will show only the sales order with complete stock confirmed through production order in the VL10E report.
Regards
Debesh

Hi,
Check userexit LV50R_VIEWG02. If CF_SUBRC = 1 you will not see it in the list. For this purpose in the interfase you have the information in IS_VBEP. Set a break-point and check the conditions.
For more info check the Note 198137 - VL10: Customer-specific enhancements / user exits
I hope this helps you
Regards
Eduardo

Similar Messages

  • SD report for the open sales orders with items

    Hi,
    Is there any standard SAP report which display open sales order togeather with the open items. I want to have columns target quantity, delivered quantity and open quantity.
    Any tip?
    BR
    Saso

    Dear Saso,
    I think, instead using Report: VA05/ VA05N; its better to use Report: VL10C
    In this report, you will get all the Sales Orders along with Materials - relevant for open delivery, along with Open Qty. and various other options can be selected from "Change Layout - (Ctrlt+F8)".
    Best Regards,
    Amit
    Note: Don't maintain any Field-Entry (while executing the Report: VL10N; in order to list all Sales Orders. But, if you want to list Sales Orders based upon some criterias, maintain the Field-entries, as reqd.

  • Producrt Cost by Sales Order with Valuated Stock

    Hi Gurus,
    My client is having  Producrt Cost by Sales Order with Valuated Sales Order Stock. Can anybody reply me for my following issues.
    1. while calculating Sales order cost estimate thru VA02 , the same Cost estimate is appearing against with EK02 condition type in Sales order Condotions. what is the use of Sales order Cost estimate? is there any impact on production?
    2. What is Difference between Sales Order Cost Estimate and Order BOM Cost estimate?
    3.when can we calculate Sales Order Cost estimate ? whether before Production or before billing ? can anybody tell me please..
    4.while settling the production order also system picking the cost in VPRS not in EK02, i am not sure about this step.can any body correct if i am wrong
    5.I know we can caluculate WIP in Sales order also. when can we calculate ? before settling the Production order or after production ?
    thanks
    Prasad

    Hi,
    there are 3 types of scenarios in MTO.
    In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
    In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
    In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver.  Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
    Please let me know if you need further details in this regard
    Surya

  • Issue in V_V2: Can system rescheduling the sales order with out stock

    Hello All,
    I created sales orders with one material. For that material the stock is zero now. The system has not confirmed the qty in sales orders while creating.
    After that as per the client we ran the V_V2 for rescheduling, but system has not rescheduled any schedu lines in any sales orders.
    Is it due to lack of stock?
    One more point is we do not have Delivery proposal option in sales order. Only One time delivery option.
    Is it due to this setting?
    Please help me to solve this issue.
    Regards
    Lakshmikanth

    Hi
    Because there is checking rule set at order level , thats why once stocks is not there due to unavailabilty of stocks system not allow to go for V_V2.
    for this u hav to deactivate under oVZ8/9
    thanks
    mk

  • APO atp on sales orders with complete delivery.

    Hello all.
    We run ATP in APO for sales orders on a lot of products. Often a sales order will contain many different products & often Complete delivery will be chosen. When we do the ATP check one of the products may have a long delivery time compared to the rest of the products on the order, and since we have chosen complete delivery the delivery date for the entire order will be pushed back.
    Is there a way to find out which of the products in a given order causes the delay or do we have to have something coded you think?
    As is the users have to remove complete delivery and then do the ATP for each of the products to find out and that's expensive timewise.
    Any ideas welcome.
    Regards
    Simon Pedersen.

    Hi Simon,
    Is there any specific reason to choose "complete delivery" option. You can use delivery proposal option and this will provide delivery date to each schedule line as per material availability.
    In R3 go to SPRO->Sales and distribution->baisc function->Availability Check and Transfer of Requirements->Availability Check->Availability Check with ATP Logic or Against Planning->Define Default Settings In this transaction maintain availability check rule as "C"
    Regrds,
    Vaibhav

  • How to show Open Sales Orders only in a report?

    Hi,
    I am working on a Business Objects report to show open sales orders. Here i pull data from a RapidMart universe for which data comes from SAP.
    I just wanted to know which object or field in SAP can/will differentiate whether a particular sales order is delivered or not.
    Is MRP anyway related to this?
    Plz. help!
    Many Thanks,
    Arun KK

    Gattu,
    Thanks for your reply.
    However, the problem goes like this.
    I am working on an existing BO report. This report works perfectly(shows only the open sales orders) except for some leakage(some delivered items too get it).
    The existing report's query have filters only one MRP Element and Order Category.
    Could there be anything that can be done with these objects?
    Thanks,
    Arun KK

  • Report for sales orders with abnormal discounts

    Hi
    We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
    How do i get this report..Kindly provide me the table names&logic ...
    Reg
    JJ

    We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
    How do i get this report..Kindly provide me the table names&logic ...
    Select KNUMH where KONP-KSCHL EQ ZDIS ( Condition record number)
    Select KONV-KNUMV   Where KONV-KNUMH EQ KONP-KNUMH
    Select VBAK-KNUMV where VBAK-KNUMV EQ KONV-KNUMV
    Then with the help of ABAPER hard code the condition amount (KBERT>10%)
    Regards
    Rohit

  • Product cost by sales order with Valuated Sales order stock

    Hi Gurus,
    I am working on Poduct cost by Sales Order with Valuated stock. but i have doubt ragarding to Cost estimation.
    1.In sales order scenario also Standard Cost estiamtion (CK11n and CK24) and Marking, Releasing is Mandatory? if not how can we estimate the cost?
    2. If we are estimating the cost by using Standard Cost estimate, when can we estimate the cost?
                can anybody please give me the steps which we are following in Poduct cost by Sales Order with Valuated stock from starting to end Settlement
    Thanks&Regards
    Prasad

    Hi,
    there are 3 types of scenarios in MTO.
    In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
    In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
    In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver.  Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
    Please let me know if you need further details in this regard
    Surya

  • How settlement rule will be created for Sales order with cost object

    Dear Experts,
    We are using product cost by sales order with valuated stock. In addition we are not using COPA
    We also consume some materials at sales order level and at the end of month we want to do the result analysis and settlement for the same amount. In this case can any on explain how system will behave regarding settlement of sales order cost and what entries will get pass in the system.
    In our case we have done below activities...
    we have created sales order,
    All production order activities completed till final GRN including month end activities
    Material consumption against sales order
    Result analysis executed
    At the time of sales order settlement, system throwing error (Sender doesn't have valid receiver, please create settlement rule for sender object)
    Then i checked in sales order there sales order settlement rule not defined.
    I guess this settlement rule need be generated by system automatically. If not, please let me know the process of it.

    HI kishore
          the reason is that sale order always carry the revenue  and production order and production period carry the cost .
       cost you can settle to the Material and even management want  to be settle the cost to material only in production order OR period
    but in sales order  when u sell the product it carry the revenue not the cost and management want see and analysis based on profitability segment are profit center level .
    Prerequisites
    If CO-PA is active, the system generates a settlement rule when you create the sales order. The settlement rule determines whether data is settled to other objects or other areas in Controlling. In accordance with this settlement rule, the relevant data is settled to CO-PA.
    If CO-PA is not active, create a settlement rule. This settlement rule that you create manually normally contains a G/L account as a receiver (such as 399999). You can also settle costs and revenues or results analysis data to objects with revenue.
    You can also settle the cost of sales calculated in results analysis to a fixed asset or a cost center. To do this, you must add to the allocation structure the results analysis cost elements under which the cost of sales is updated to the order.
    The settlement rule includes a distribution rule for the sales order item. The distribution rule is made up of a settlement receiver, a settlement share, and a settlement type:
    The settlement receiver (such as profitability segment or G/L account) specifies the object to which the actual costs and revenue of the sales order item are settled. The settlement receiver can be proposed through the settlement profile.
    The settlement share defines the percentage or the equivalence numbers used to distribute the costs to the individual settlement receivers. The settlement share for sales order items is usually 100%. A settlement share of 100% is preset in the system.
    The settlement type specifies full settlement of the sales order item. This ensures that all the data on the sales order is available for results analysis.
    Settlement still takes place in each period. The revenues and the cost of sales are transferred to CO-PA by period, and the work in process and the reserves are transferred to FI.

  • List of sales order with only open qty

    Hello sap gurus,I am working in a support project for a leading cement manufacturer,I am facing a issue related to list of sales order only with remaining open quantities.In va05 transaction it gives the list of open sales orders,but if none of the line items is delivered,but according to the clients reqiurement they want the list of open sales order ,means say if a sales order has 5 line items and 3 are delivered but 2 are remaining, the list should give the list in such a way that the sales order with only 2 open items should also appear.
    please guide me if there is any t-code for the same other than va05,else any developement work needs to be done.
    Regards,
    Anshuman

    Dear Anshuman,
    T. Code: VL10C
    This is the Best-suited Report, for your requirement.
    Best Regards,
    Amit

  • Any std report in Capacity Planning showing only dispatched orders/opns ?

    Hi CRP gurus:
    Does SAP has any standard report/transaction in Capacity Planning that shows (or has a selection for showing) only "dispatched" orders/opns ?
    - Chetan

    Chetan,
    Use transaction COOIS. In this choose Operations, System status as DSPT at operation level, enter plant and execute. You will get only orders and the operations which are dispatched in this plant.
    You can navigate to the capacity planning table from the selected records through order change.
    Hope this is ok with you,...reward points..and close.
    Regards
    Ram

  • Report on changes to sales orders

    Hi Experts,
    I am looking for a way to report on changes to sales orders, specifically the row shipping date and quantity.
    I can see that the data is apparently in tables ADOC and ADO1 but am having trouble getting useful results. What I need is a report that, for sales orders only and for a date range, shows all changes to row quantities or row shipping dates. The type of output that would be useful is:
    Change date  - document # - row# - Item code - old shipping date - new shipping date - old qty - new qty
    filtered on change date for sales orders only. This seems beyond my preferred option of XL-Reporter and I'm getting lost in the history tables in creating a query.
    Best Regards
    Matthew

    Hi,
    Without doing the query for you, history tables are linked as the "normal" table but with the addition of the LogInstance column. Then the UpdateDate column (from base table ie. ADOC) will tell you when it was changed.
    Your query isn't an easy one... SInce you have to link an instance (ie. LogInstance = 1, which will be the original created object) to all the modified ones.
    Regards,
    Eric

  • Craete Sales Order with reference to Schedule Agreement

    Dear All,
    I want to create a sales order with reference to a schedule agreement.
    Purpose:
    In case of quantity shortages in delivery of the schedule agreement  line item (Doc type - ZDS), customer want to send a replacement for the balance.
    This replacement is send using a new sales order (Doc type - ZREP). So the requirement is to refer the schedule agreement to keep the link between initial schedule agreement & the replacement order.
    I have maintain the relevant copy controls as well. (ZDS to ZREP)
    I have 2 type of item categories used in the schedule agreement (ZDS).
    LPN - this is for the normal delivery, billing. (Billing relevance - A in the Item category)
    ZPN - this is just to do the manufacturing. No delivery billing is done using this type. (Have Billing Relevance -BLANK)
    So when I try to create a Sales order w.r.t. Schedule agreement, only lines with ZPN shows me in the copying dialog.
    But I want to copy lines with LPN, not lines with ZPN.
    Any idea how to solve this?
    Thanks a lot !

    Thanks you very much for all replies !!!
    Dear Raj/Ankur,
    This replacement is due to quality issue in the initial sent material.
    So I'm sending the same material I sent earlier from the schedule agreement LI. Only difference is to capture the replacement, I use sales order type ZREP (VA01) other than schedule agreement.
    To give you more info on this,
    They use Item category ZPN to produce semi-finished goods & keep it ready for that customer. Once customer asked it with specific color, they do color it & deliver & bill. To do delivery & billing they use Item category LPN.
    Therefore each Scheduel agreement, they have one line with ZPN - only to production.
    one or more LI's with LPN - to do subsequent delivery & billing for that customer.
    So replacement should be created with reference to the LI with LPN. Because my initial delivery happened from that LI.
    Everything is in place as you have mentioned.
    I have maintained copy controls from ZDS to ZREP
    I have copy controls from Item Category LPN to my normal order Item category.
    I have schedule line copy control as well.
    Am I missing anything??
    And there is no issue with my Item category group & material master Item category group as well.

  • CO46 report not displaying all sales orders

    Dear all
    We are not able to get details of all sales orders in CO46..(All item categories and different sales order types).Screen remains blank while executing..It doesn't show line items-Overview screen..
    can u please tell us the reason for the same
    Is it to do with sales order type or item category...How do we bring all sales orders in this report
    Regards
    sudha

    Hi
    I think this report only shows the sales order that have diract relation to a Production Order. The other Sales Order are not showed
    If you want a report for all sales order, try VA05 or SD01
    Hope this helps
    Roger

  • Sales order with multiple billing doc's

    HI Guys
    My client has specific requirement related the freight charges .Freight charge is represented with a condition type in my pricing procedure. If a given sales order has multiple shipments (I.E deliveries) then this freight charge is getting calculated partially at item level and passing on to the   billing documents accordingly. Customers receive invoices with part of those charges. They will receive other parts with other shipments and invoices until sales order is completed
    As per my clients business it would be more logical that Freight charges are invoiced on the first invoice. And not as parts in each billing doc
    There are two things which are striking to my mind in terms of solution
    1.   Since it’s only to do with showing the freight charges on the output sent to the customer. Is there any option to display the complete freight charges on the 1st billing doc’s output type? And restrict to display in the remaining billing doc of a given sales order. Any idea how to achieve it this way
    2.   Can this be controlled with the help of copy controls between delivery and billing doc at an item category level .i hope there should be some standard routine in place if not what should be my logic in this routine that helps to accomplish this task
    3.   Create a routine and assign it to the condition type ZMIN…Not sure what logic should I built in here to get the above  requirement up and running
    Please guide me a way forward on this……………..
    Thanks for your support.
    Will reward without fail …
    Mohit

    Hi Madhu,
    The billing document cannot be deleted. It can either be cancelled or a credit memo created with reference to it. You can also check in the same VBFA table, if for a billing document any cancellation exists. If yes, then, the delivery cost becomes relevant. Else it does not.
    However, there could be a timing issue. Say if there are 3 deliveries and 2 of them are taken for billing at the same time in different sessions. (I am not sure if SAP will allow this because of the locking of VBAK table but still a possibility). Then, when the routine goes back to VBFA with the Sales order number, it does not find any billing document. So there is a chance that the freight charges may appear on both deliveries in full. So, you may want to test a few scenarios like this to make sure the logic is good and accommodates all scenarios. 
    Hope this helps.
    Regards,
    Mukund S

Maybe you are looking for