Oracle tax reports to show exempt non exempt for states

Hello
is there any standard oracle report to show taxability of states in USA and Canada (exempt/non exempt status)
If so please give the report name and please advise on the name of the responsibility to use to run the report.
thanks
kp

Similar Messages

A report to show 2008 Customer Sales by State.

My customer needs a report to show 2008 Customer Sales by State. I don't see any SAP reports that will do this. Is the state held in any of the document files that I could use to create a query?? Or does anyone have a query that reports this information?

Try using following query:
SELECT T0.CardCode, T0.CardName, T0.DocNum, T0.DocDate, T0.DocTotal, T1.State
FROM OINV T0
INNER JOIN CRD1 T1 ON T0.CardCode = T1.CardCode
AND T0.ShipToCode = T1.Address
Though A/R Invoice, does not store the state code separately, it does store the addresscode, which was used for shipping, which could be linked to the Addresses table. Though if the user changes the address manually, than there is no other way, but to do some programming and find the address name, though it will be pretty difficult, because users might not always be correct with their spellings.
Rahul

Tkprof not showing the Execution Plan for Statement

Hi all
using oracle 9i release 2
I have issued the following statements
alter session set sql_trace
alter session set events '10046 trace name context forever, level 12';
--then executed a pl-sql procedure
after reading the traceout outfile it shows the Execution plan for statements directly wirtten under begin and end block and doesnot displays the plan for the statements written like this
procedure a is
cursor b is
select ename,dname from dept a,emp b
where a.deptno=b.deptno;
begin
for x in a loop --plan not found but stats are written
select ename into v_ename from emp where empno=300; --does show the plan+stats
end;
what I am missing to get the actual plan in trace output file
thanks in advance

You have to exit sql*plus after running the procedure, example tkprof is below:
declare
cursor c is
select ename, dname
from emp, dept
where emp.deptno = dept.deptno;
begin
for v_x in c
loop
dbms_output.put_line(v_x.ename || ' ' ||v_x.dname);
end loop;
end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.06 0 0 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.06 0 0 0 1
Misses in library cache during parse: 0
Optimizer goal: CHOOSE
Parsing user id: 68
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
SELECT ENAME, DNAME
FROM
EMP, DEPT WHERE EMP.DEPTNO = DEPT.DEPTNO
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 15 0.01 0.00 0 44 0 14
total 17 0.01 0.00 0 44 0 14
Misses in library cache during parse: 0
Optimizer goal: CHOOSE
Parsing user id: 68 (recursive depth: 1)
Rows Row Source Operation
14 NESTED LOOPS
14 TABLE ACCESS FULL EMP
14 TABLE ACCESS BY INDEX ROWID DEPT
14 INDEX UNIQUE SCAN DEPT_PK (object id 40350)
Best Regards
Krystian Zieja / mob

Report to show all purchase orders for which invoice tolerence is greater than 3%?

Hi Experts,
Recently our company cofigured 3% tolerence limit for invoice.Now, I have got a requirement to create a report to show all the PO's for which the
invoice tolerence limt is eq 3 %.Kindly anyone advise ,is there any table that stores the inovoice tolerence limit based on PO? How to achieve this requirement.
Thanks in advance
Thanks & Regards,
Anusha.B

Hi,
I was wondering don't you have in your company MM consultant who suppose to give you the required tables name .
Regards.

Crystal Report not showing up during deployment for CRVS2010

Hi,
Have encountered problem when deploying Crystal Report using VB 2010. The report is able to show up during ASP.net development using VS 2010 but when i try to deploy on a IIS server, the report is just showing a blank page when trying to view using an Explorer on the client side. I'm using Window XP IIS 5.1 web server.
Have tried doing VB setup and installing the merge module CRruntime_13_0_1 but still not working.
Any help will be appreciated.
Thanks
KB

While the supported platform text says that Microsoft IIS5.1 is supported, I'm a bit dubious as CR 2008 (v. 12.x) did not support IIS5.1. See [KB 1494954 - Crystal Reports 2008 DHTML viewer for VS .NET is blank when displayed on a web form|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433393334333933353334%7D.do].
I'll check with Program Management and get back with a definitive answer.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Report to show shift wise activities for particular product

Hi, Is there any report exists to show shift wise activities carried on particular product, basically time taken,man/machine utilization,in-process rejection,machine break down etc.? how to generate the same.

Dear Yadav,
This report is something called as workcenter's performance report or as plant performance report.
In standard SAP again CO28 or COOIS or MCP7 or MCPH can be used.
But still in your case only a customized report can fulfill your requirement.
check and revert back.
Regards
Mangalraj.S

FSG: Reporting Attributes Showing in one column for multiple segments

I am doing an FSG and and trying to run it through Program - Publish FSG Report and using the template provided but having a problem with the first coulmn of the report. The first column of the report is bunching up all the segments in one column instead of seperating it in multiple columns. For eg. 5100 Travel expense instead of in two different coumns is put together in one column. I have tried lot of things but none of them fixed it.
I would be glad to know anything that can solve or lead to a solution to this problem
Arun

Yes, I did. I had chose four segment descriptions there and I had something like 30-35 as the space for them. I have also checked the starting value of the column set. It looks ok. The XML BI Publisher is unable to seggregate them it seems for some reason.
Arun

A report to show the discount given for each order

Is there a standard report that will list the discount given for an order and also how much (in terms of percentage) as compared with the total sales value?
Thanks

Hi,
I believe that this discount is a condition in your pricing procedure, and not a dicount given in FI, right?
If is a condition in your pricing procedure, you can create a LIS structure to save this discount in a cumulative way.
Or, you can construct your own report through a query (SQ01) or a Z report based on the Logical Database (SLDB transaction), logical database AAV is the more indicated.
I hope that this helps you.
Regards.

Direct Reports not showing in Lync Clients for certain users in a pool

Hello guys, I am having issue with some users not being able to see direct reports of their managers in lync clients. Direct reports correctly shown in AD and outlook, but not in Lync. I have two paired lync pools. This issue is happening to users situated
within a pool. If I moved the manager to second pool, then users will see his direct reports. Does anyone knows how to fix this issue? Attached is sample.

Hi dareadepoju,
This information is from AD, you can try synchronizing the information manually.
Delete the .slabs file from the file share sitting on 000000000\000000000 folder and then run Update-CSUserDatabase and after 5 minutes, run Update-CsAddressBook.
The folder path:
X:\share\1-WebServices-1\ABfiles\000000000\000000000\
Best regards,
Eric

Witholding tax report show "no record were selected". tcode S_P00_97000134

Hello everyone.
i need some help.
i found some document that have witholding tax in document such as 5105620781 year 2011.
in transaction code S_P00_97000134 that use for print witholding tax report and witholding tax certificate.
when i run this transaction code for print witholding tax certificate or witholing tax report.
system show "no recored were selected"
i attached excel file to show you what document that cannot print witholding tax, and what document that can print witholding tax.(there are 2 tab in excel )
please clarify why some document cannot print witholding tax certificate.
below link ,you can see my example. (it's excel file)
http://www.mediafire.com/?rokkgg3vtn1aw81
Edited by: dittaporn nanasilp on Mar 22, 2011 6:34 AM

Dear all,
first of all the report runs if You posted some documents with the WIthholding tax.
When You run the report You will insert the Output group.
Please be informed that the report will extract the documents on the base of the following customizing:
IMG --> Financial Accounting --> Financial Accounting Global Settings --> Extended Withholding Tax -->Reporting -->Generic Withholding Tax Reporting --> Define Output Groups
choose Your output group double click -->
You can choose among:
Cleared vendor invoices, Credit memos, open Down payments
all vendor documents
all customer documents
and so on.....
Please check which documents with the Withholding tax data You need to extract.
save and run again the generic report.
Now It should work fine.
I hope this helps.
Mauri

Reversal Document is Showing wrong figure in Service Tax Report

Hi All,
The data inconsistence in Service Tax Report.
The reversal documents are showing the excess amount while runnig the Service tax report.
Could you please help in finidng the reason and solution for this behaviour. All reversal documents are showing excess amounts in this case.
Thanks,
Nandu

Hi all,
The Tax transfer amount of reversal document should be Zero in ST Report and in Final GL. But the service tax report is showing wrong figures.
We reversed the tax transfer document to remove the wrong line from Serv. Tax Report as well as from Final GL.
As per the business requirement if any invoice and payment is wrongly done, that should be reversed.
Before reversal of this we need to reverse the tax transfer entry, then only we can reverse the payment as well as the Invoice.
Apart from this, If any other procedure please let me know in order to avoid errors in the service tax report
Regards,
Nandu

Regarding T Bar in Oracle 10g Reports

Hi,
     We have the requirement to generate line graph report to meet the following requirement.
     The graph must be draw 4 horizontal lines.
     In these 4 lines, two lines displayed in the top and two lines in the bottom.
The bottom two horizontal lines should be drawn along with vertical lines(T bars ) for      every x values.
     This graph is actually a combination graph which have both horizontal lines and T Bars.
     We have been recommended to use Oracle 10G Report builder to build this kind of report.
     We tried all the option available in the reporting tool, we could not able to represent T bars.
     Is it possible to generate report with T bars using Oracle 10G
reporting tool.
Thanks & Regards,
Bharathi.S

I am calling report though hyperlink from one report to another report.
i have report state master with state_code,state_name column and i create hyperlink on state code that will call city report to show all city of selected state. hyperlink path as below
http://192.192.0.0:8889/reports/rwservlet?report=\\192.192.0.0\tims\Reports\Source\STATE_mas.jsp&desformat=htmlcss&destype=cache&userid=xyz/xyz@hello

Generic withholding tax report amounts

Dear Gurus
when running the generic withholding tax report it show different amounts than the ones originally posted,for example a document is posted with 7000, the report shows the amount as 6999.99!?,how can i show the same amount as the document , put in mind that the document is not posted in the local currency , if the report is run using the local currency it shows a correct amount,but i need the correct amount using the currency which the original document was posted with , Thanks .
Regards
Hem.

Hi Pete,
You may check the following wiki:
http://wiki.sdn.sap.com/wiki/display/ERPFI/1099MISC+reporting
also check this help:
http://help.sap.com/saphelp_470/helpdata/fr/06/6ba43c24358d15e10000000a114084/content.htm
Kind Regards,
Fernando Evangelista

Help in service tax report?

Dear sap SAP gurus,
I am developing service tax report,
My client is booking bills through FB60 and MIRO transactions
i am having all detail data of vendors in BSEG table
and tax details in BSET
how can i get respective applied tax data of particular item in BSEG from BSET ?
I used tax group as relation but the problem is some times it is maintained ( FB60 Bookings of Bill ) and some times it is not
( MIRO Bill Bookings ).
is there any other technique to do ?
Solution will be rewarded.

Hi all,
The Tax transfer amount of reversal document should be Zero in ST Report and in Final GL. But the service tax report is showing wrong figures.
We reversed the tax transfer document to remove the wrong line from Serv. Tax Report as well as from Final GL.
As per the business requirement if any invoice and payment is wrongly done, that should be reversed.
Before reversal of this we need to reverse the tax transfer entry, then only we can reverse the payment as well as the Invoice.
Apart from this, If any other procedure please let me know in order to avoid errors in the service tax report
Regards,
Nandu

Report not showing terminated empoyees payroll results

Hi there,
I have coded a report that shows customized payroll data for a group of employees, delimited by two dates. The user found a problem when an employee is terminated on a given month but his termination is processed the next month (vacations, etc). Say the employee quits October 27, the payroll is run on November 10 and the report is run for November 1 - November 30: I wont see his payroll results because the employee does not belong to a particular organizational unit in november.
This is my main code:
START-OF-SELECTION.
GET pernr.
sapid = pernr-pernr.
* CREATE AND POPULATE PAYROLL OBJECT                         RRV100807
CREATE OBJECT pay.
CALL METHOD pay->read_result IMPORTING list = mylist.
* ELIMINATE OLD RECORDS                                      RRV100807
LOOP AT mylist INTO wa_mylist WHERE SRTZA <> 'A'.
    DELETE TABLE mylist FROM wa_mylist.
ENDLOOP.
* PROCESS PAYROLL FOR THE DESIRED ENTRIES                    RRV100807
CALL METHOD pay->write_result EXPORTING list = mylist.
GET payroll.
LOOP AT payroll-inter-wpbp INTO wa_wpbp WHERE orgeh IN PNPOBJID.
*   PROCESS PERIOD DATA
    itab_rt = payroll-inter-rt.
    PERFORM get_wt_amounts.
    EXIT.
ENDLOOP.
GET pernr LATE.
* IF THERE ARE PAYROLL RESULTS
IF wa_result-otsal <> 0
     OR wa_result-regsal <> 0
     OR wa_result-teller <> 0
     OR wa_result-other <> 0.
*   PROCESS EMPLOYEE
    PERFORM get_data.
ENDIF.
Basically, the GET PERNR (get personnel record) is never executed because the employee does not belong to the org unit. Is there any way to gather employee records in one interval and payroll results in another? I assume they both use PNBEGDA and PNENDDA at this point.
What I want is to retrieve payroll information based on the screen dates (BEGDA and ENDDA) and the employee data based on the payroll periods that were run during those dates.

Instead of using the standard selection screen field for choosing org units, you could create a custom selection screen field for the org unit. So the org unit would not affect the initial GET PERNR selection. Then in your code (after the GET PERNR) you could check for the org unit, with an additional condition to check the employee's previous org unit if he is terminated. There is also more than one way to get payroll results. We often use this in our reports:
FORM get_payroll_results.
CLEAR results_present.
    CALL FUNCTION 'CU_READ_RGDIR'
      EXPORTING
        persnr          = pernr-pernr
      TABLES
        in_rgdir        = rgdir
      EXCEPTIONS
        no_record_found = 1
        OTHERS          = 2.
    IF sy-subrc EQ 0.
Get cumulative monthly results
    Store only active payroll results.
      DELETE rgdir WHERE srtza NE 'A'.                "Active
    Delete all the payroll results not from the requested year
      DELETE rgdir WHERE paydt0(4) NE p_mdate0(4). "Reporting Year
    Delete any payroll results after the requested balance date
      DELETE rgdir WHERE paydt > p_mdate.
    Delete voided payroll data.
      DELETE rgdir WHERE voidr NE space.              "Voided
    Sort so the first record is the last for the requested year.
      SORT rgdir BY paydt DESCENDING fpend DESCENDING.
      LOOP AT rgdir INTO ws_rgdir
        WHERE paydt > beg_date.
        seqnr = ws_rgdir-seqnr.
        CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
          EXPORTING
            clusterid                    = 'RU'
            employeenumber               = pernr-pernr
            sequencenumber               = seqnr
          CHANGING
            payroll_result               = result
          EXCEPTIONS
            illegal_isocode_or_clusterid = 1
            error_generating_import      = 2
            import_mismatch_error        = 3
            subpool_dir_full             = 4
            no_read_authority            = 5
            no_record_found              = 6
            versions_do_not_match        = 7
            error_reading_archive        = 8
            error_reading_relid          = 9
            OTHERS                       = 10.
        LOOP AT result-inter-rt INTO wa_rt
          WHERE lgart = wa_wagetype.
              ADD ws_betrg TO ws_total.
         ENDLOOP.
      ENDLOOP.
    ENDIF.
This allows you to specify by date, wagetype, pay period, etc. which payroll results you wnat to include. I hope this helps.
- April King

Oracle tax reports to show exempt non exempt for states

Similar Messages

Maybe you are looking for