A specific topic will not render with any search criteria.

I have two similar topics that no matter what i put in for seach criteria they will not be listed in the results. I've tried the following.
Re-importing the .doc
Re-creating and Re-importing the .doc
Confirmed that the file name and title have no special characters
Confirmed that the option to eliminate the topic from search is not selected in the topic properties
I am able to search for the topic locally after generating but I am unable to search for the topic after publishing on the server.
I am running Robohelp 9 on a Robohelp 8 server.

You have checked the new topics survived the journey to the survive.
I'll leave Colum to comment on whether it is a Rh9 / Rh8 Server issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • Specific Content Will Not Load With Any Browser

    This is something I have never run into and can't solve...
    I have a D-Link DPR-1260 wireless multi-function print server. My machines are a MacBook Pro with 10.5.1, an iBook G4 with 10.5, a Mac Mini with 10.4.11, and a Mac Mini with 10.4.10.
    Connecting to the printer via LPD is a non-issue and works fine with all the machines.
    The strange problem occurs when accessing the web based services of the DPR-1260. Scanning, even using Windows, is not supported by the MFP software (Epson) but is done via the browser. Also network settings, etc.
    The good (normal): Using a machine running 10.4.11 or 10.4.10 all the web content loads and works fine using any Safari, FireFox, Camino, or Opera. Even using the beloved IE 5.2.3 everything works but the Scan page. Ditto for Win XP SP2 using IE 7 or FireFox and running under Parallels or booting directly in on the MBP.
    The bad (weird): On either the MBP running 10.5.1 or iBook running 10.5 only the "simple" pages will load using ANY browser. I don't normally do all caps for emphasis, but I have never seen an issue like this. I cannot access the Scan, Advanced (settings), or Setup (more settings) pages. Even the simple login page only works on occasion.
    This certainly appears to be related to OS X 10.5 but I cannot figure out how.
    For reference, I have tried every conceivable combination of browser, wired vs. wireless connection to the unit, disabled firewall, disabled LittleSnitch, watched traffic using tcpdump, and looked for odd ports on the print server using nmap.
    Given that them problem occurs using WebKit browsers and browsers not using WebKit, and that it works properly using 10.4.* with any browser, I assuming this is some sort of system level problem.
    I can provide even more details, but this post is getting too long. If you think you can help and have any questions please ask.
    Please, any help is much appreciated!

    Yes.
    As I see it, it's clearly not a JS implementation issue as not all these browsers handle JavaScript identically (although as a web developer I wish they did). Obviously Safari and Shiira, the two WebKit based browsers, handle it the same, Opera, FireFox, Camino, iCab, and IE 5.2.3 have different implementations.

  • HT204368 bluetooth stopped working and now will not pair with any of my devices ?

    bluetooth stoped working and now will not pair with any of my devices? any suggestions?

    Hello, oscar302. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you may find helpful with this issue.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    Jason H.

  • MyDAQ fails Self-Test and will not work with any software

    I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
    Trying to self-test or reset the device in MAX gives these errors:
    -The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
    -There was a problem resetting the device. Error code: 80040383.
    It also gives this error when trying to use the Elvis Oscilloscope:
    -Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1 
    Possible reason(s):
    NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
    I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked  NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
    Attachments:
    ni_support.zip ‏341 KB

    Hi chaka123,
    I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
    To answer your questions:
    Does the Test Panels work at all?
    I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
    Have you tried to delete the device in MAX?
    Once again, I cannot because it shows up as Flash Firmware Updater.
    Which is the color of the icon on the left side of “myDAQ1”?
    It was green before the uninstall. Now it shows the USB symbol.
    I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device." 
    What folder can I manually point Device Manager to in order to load the correct driver?
    Attachments:
    devicemanager.PNG ‏40 KB

  • Project will not render with 'I-Frame only MPEG'

    Hey Adobe, I am posting this at your request.    
    I previously used to have an old Intel Core2 chip system.
    I upgraded this so that my video editing life would be faster.  I have a new motherboard, with a new intel I7-4770 @ 3.5Ghz chip. same memory (16Gb-1600), graphics card, hard disk, DVD drive, etc..
    On the Core2 system, video projects which I worked on all worked fine. I mainly use a Sony Z5 to shoot video which creates .M2T files.
    On my old system, running Premiere CC it ALL WORKED - no problems, but on the new build, it crashes EVERYTIME i try to render, with 'Error Compiling Movie - Unknown Error'
    Having spent FOUR hours on the phone to your tech supports in India, they came up with a workaround. I stress - it's a workaround, not a solution.
    They found that if i changed the sequence to be 'Custom' and then selected 'Microsoft AVI' (and any Codec, doesn't matter which) as the Preview File Format  instead of 'i-Frame Only MPEG' then yes - it renders.
    The tech told me that this was because 'M2T' files were fussy, and needed to be treated like this.
    WRONG!
    if this *needed* to be the case, then why did it work previously on my old system without any problem?
    Also, if I take a project that crashes on my desktop PC, and copy it over onto my laptop, de-activate Premiere on my desktop and activate on my laptop and run in on there .. IT RENDERS FINE, using the 'I-Frame Only MPEG' setting.
    Also, i shot some video with a Nikon D5100 which produces full HD .MOV clips, *AND THE SAME PROBLEM STILL OCCURS* when rendering on my desktop PC, and only renders when i switch the Preview File Format to be 'Microsoft AVI - so it's not related to the .M2T video file type.    
    So I can render stuff, but ultimately it's a workaround and not a solution, as when I am finished with a project, and want to archive it off I do so by exporting and choosing 'Match Sequence Settings', with with Microsoft AVI selected, it wants to therefore obviously export it as an AVI, which i do not want - I want to export it as 25mbps MPEG which is the original quality/format that it was shot at.  When i try and do this with 'i-Frame Only MPEG' selected as the sequence type - you've guessed it, Media Encoder crashes
    So.  Why does i-Frame Only MPEG work on one machine (my laptop), but on my main machine (desktop) which i want to use, it doesn't? What piece of software/codec/file am I missing?
    - i have installed from clean build of Windows
    - i have deactivated and reactived Premiere CC
    - i have uninstalled Premiere CC and reinstalled it
    - i have uninstalled all Cloud CC programs and reinstalled them
    - I have run CC cleaner too
    - I have the latest video drivers for my graphics card (it is the same graphics card that worked just fine on my old system anyway, so is not the issue)
    - I have full Windows/Admin permissions. it is not a permissions problem
    please don't suggest any of those options.  None of them work.  I need someone who understands your software and knows what i-Frame only MPEG is to be able to tell me why it isn't working on my system.  I am now past the point of anger (because i have lost several days worth of worktime - and thus money) and being upset (because it's massively frustrating when somthing that previously worked now doesn't), and am now just at the point of being bewildered that no one there can seem to tell me what is going on here, and how to solve it.
    Many thanks,
    Geoff.

    I have to put in my 2 cents...and first of all I'm sorry things are happening that are not FANTASTIC results... etc... but there may be ways to make things better... but this stuff is complicated and extremely computer intensive ( math stuff with cpu and ram and stuff ) .. so the platform is very critical to best results.. not just the software.
    There's books on compression and how that stuff works ( lossless or not ) and it's all about changes from frame to frame and how to best make file size smaller while keeping every single pixel perfect in each frame... and this is unfortunately not standardized on planet earth. Different companies make up what they can to sell cameras and recording medium and so on..  there are some standards ( for broadcast and movies etc ) cause at some point some groups have to deal with delivery to PEOPLE to watch stuff.. and have decent quality to watch...
    In general this is very complicated and full of problems cause there is no single work flow , and probably never will be .
    What Jeff is talking about ( I think ) is that during the process of a computer program interpreting images ( frame by frame ) those pixels that have not changed a lot are described in a line of code by the software that says, " This stuff has not changed much if at all ".  Some stuff from one frame to the next one DID change a lot ( someone walking or someone running.. the running changes more fast ) .. and so lines of code say ,  " this stuff changed a LOT "....
    During the process of the software to determine what changed and how MUCH changed.. is complicated.. cause the program basically looks at frame A and then Frame F and notes the changes of pixels... and THEN ( as if that wasn't complicated enough ) the program then goes BACK  to frame A and then ahead to frame J ... so now it has expanded it's look at what changes have occurred...
    Now the ' CODEC " ( the specific codec used by the program you are running , like CC or avid or FCP ) is going to make it's best GUESS as to what really changed that matters the MOST to the image...so you basically get a nice image from A to J ..... but it is now compressed and taking up less room on your hard drive and ram etc....cause it is interpreting the image changes... and so on...
    So if you had every single frame without any guess work and no compression to save space cause those pixels did not change between A and J .... you would have HUGE FILES .... and no benefit in terms of being able to edit anything on a little home desktop computer... even if you have a really powerful one.. it is not going to be good enough to do that stuff....
    It would be unfair to say that adobe isn't doing the best they can to accomodate all the camera manufacturers " codecs " and give the best results they can , with a million different computer platforms and hardware out there you can buy off the shelf ....
    The I frames and B frames and other frames have to do with the " guessing game " of changes in pixels, changes with every " action " in those ranges of frames, and is very complicated... but there are books about it and what standards exist can be researched and studied if you're into that stuff....
    I am an idiot about this stuff but the main thing is dont give up.. and just try to be patient when things dont work out like you thought they would, and figure out what is going on so you can make things work the way you want...
    and good luck !

  • My iPhone will not pair with any devices on bluetooth, help?

    I can't seem to pair my iPhone 4 with any other phones or devices.

    PAISLEYSAINT
    I have a THB Bury car phone cradle specific to the iPhone 4 which was working fine until I updated to iOS 5.1.1 - my phone will no longer pair with it or recognise it or any other Bluetooth device !
    I carried out a full reset and relaunched the phone as if it were new - no success
    I took the phone to the appple store and one of the Geniuses looked at it for me. He told me it was not designed to 'discover' other BT devices after he paired it with his MacBook but could not pair the devices in the opposite direction - i.e my phone to the MacBook. I thought this strange that the premier smart phone on the market should not have this function especially when it previously worked well.
    He also carried out a full reset which is deeper than the one you can do at home - no success.
    The genius would not accept that this was a fault and claimed not to be aware of any issues but offered to have it repaired for around £116 !!!
    Incidentally my phone is just outside its  warranty and his phone would not pair up either when I asked him to check.
    THis is useless to me !! I understand Apple don't want to support BT function that allows it customers to send files between devices but come on ! My £90 BT car cradle kit is now useless and cannot be paired via my iPhone.
    I now really have to consider using a smart phone that will work.
    I love apple stuff and currently own no less than four different devices and was considering a new mac but not now. I feel let down by apple.
    DIssapointed !:-(
    iPhone 4, iOS 5.1.1
    I have this question too (0)
    Reply
    Categories: Wi-Fi, 3G and Bluetooth Tags: none (add)

  • Exchange will not sync with any iPad or iPhone

    Apple Community,
    I am running a 2003 exchange environment.
    PST's are NOT allowed.
    Users are running iPhone/iPad with iOS 6.
    Issue:  Calender events created on a computer, on the exchange users profile, will not show up on any iOS device.
    Noticed the following: The events that didn't show up all had external users that were NOT part of the global address book.
    Has anyone noticed this in their environment?

    Looks like I stumped the apple forum.  Apple support couldn't help me either.

  • Mozilla v18 tab will not open with any controls how do I fix

    my tab will not open a new tab when i use any of the open tab functions (file open tab, ctrl +t, or just he + sign on the tab line. I do not have any of the ask toolbars installed. I alos woul like to kow about the pin and tab functions that I read about in the foum but I don't have those eigher.
    I have windows 7 home premium
    Installed Memory 8 GB 7.89 GB usable
    64 bit operating system

    Maybe you should reset all preferences as there seem to be a lot that have been modified (e.g. network.http and plugin.expose_full_path should have the default value). If you haven't changed them yourself and don't know what they are about then you should leave them at the default.
    You can delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
    *http://kb.mozillazine.org/Resetting_preferences
    *http://kb.mozillazine.org/Preferences_not_saved

  • MacBook Pro will not pair with any Bluetooth device

    Last night my MacBook Pro stopped pairing with any bluetooth device (I've tried Apple Pro Wireless Keyboard, Wireless Mighty Mouse, Logitech MX900 mouse, Apple Aluminum Wireless Keyboard) and it simply won't pair with anything.
    It sees each device but when it tries to pair it fails. With the keyboards, sometimes it'll give me the passkey to type on the keyboard but then it doesn't recognize that I've actually typed it and hit enter. Eventually I just end up with:
    "The pairing attempt was unsuccessful. Make sure your keyboard is in range of this computer, turned on and "discoverable." When ready, click Continue to try again."
    I've reinstalled 10.5.6 Combo update, tried to pair under a different user account, turned off/on bluetooth, and still nothing.
    I did install VMWare Fusion last night and briefly shared the Bluetooth connection to that, so I'm not sure if that has anything to do with it or not.
    Any suggestions?

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • My phone will not charge, with any of my chargers!? WHY

    My phone has not been charging and I have no idea why. None of the chargers I have work. I do not sleep with my phone by me so there is no way the charger port is messed up. Has anyone had this problem? I have a galaxy S4.

    Try taking the back off the phone, remove the battery for a second then put back in and put cover back on. Try charging again. Sometimes, phones with removable covers allow static build up between the battery and charging ports. Basically, it just bounces the charge back & forth but can't charge. Lots of times, the battery heats up and if it happens often, can actually damage the battery.  Static build up is caused (mostly) by keeping phones in pockets, pants, coats, sweatshirts.. or even in/out of purses or any other fabric lined anything.  This is also what drains battery life. (The only downfall of removable batteries). Anyway, just get in the habit of removing the battery at least once every couple of days OR at anytime that u feel the battery getting hot. Good luck!

  • I upgraded my iMac to OS 10.8.2 yesterday. Now iTunes will not sync with any of my devices - Apple TV (gen 1), iPhone 5 (with new iOS 6), or first gen iPad. I get an "unknown error 1140" for each device. Any ideas?

    Because the sync error is on every single device, and all 3 are running different versions of an OS, I assume this has to do with the new Mountain Lion upgrade. I probably should have waited for 10.8.3!  Any suggestions would be greatly appreciated!

    A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc.  It was an all or nothing deal. But selecting all would cause the error.
    So I had read the other forum posts about the "&" symbol being the cause of the problem.  I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference.  I found one album with the "&". I edited that one.  Still would not work.  So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild.  Finally we created a whole new library and reimported my master photos from my original one.  Using this option would allow me to now check off that radio button in iTunes.  BUT... I now lost all of my albums and events and would need to rebuid them.  I was not happy. They agreed and we set up time to talk this week.
    So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
    Quality control is not up to par with Apple these days. 

  • MyDAQ passes Self-Test but will not work with any software

    Hello,
    I am currently having issues getting the myDAQ to interface with ELVISmx Instruments. My first attempt followed the included white paper step by step. When that did not work I moved on and tried installing (one at a time of course) several different versions of ELVISmx (14.0, 4.5, 4.3.2, 4.3.1, 4.2.1, and 4.1) and none of them have been able to interface correctly with the hardware. Additionally, I have tried installing the entire LabView suite provided by Georgia Institute of Technology, and several other NI applications associated with the myDAQ on the white paper.
    The software installs have all completed successfully, the ELVSImx instrument launcher launches; however when I click on the DMM tool, or any other one, the application fails to load. A loading window pops up and the blue status bar scrolls but nothing ever happens. The application window never launches. I let it run over night thinking it might be confused or just really slow but nothing changed in the morning. The only way to exit out of the window is to end the task in the task manager.
    In NI MAX, the hardware is recognized correctly and the "self test" feature returns that the myDAQ is functioning correctly. I have checked the Event Viewer for Windows applications and there do not appear to be any errors associated to any NI software.
    I have exhausted all my resources in trying to get this to work but all of have done is frustrate myself and everyone I speak to about the issue.  

    Hi amoore73, 
    The myDAQ requires the NI DAQmx drivers as well as NI ELVISmx. Have you tried installing NI DAQmx?
    It can be found on our website here: http://www.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du,n8:3478.41.181.5495,s...
    I hope this helps!
    Rachel M.
    Applications Engineer
    National Instruments

  • IWeb RSS feed will not load with any site.

    I am trying to display an simple RSS feed on my website and what ever site l use, BBC, France24, ABC, FOX News etc... whenever l copy and paste the RSS link in the widget and click apply. I am shown the message "The RSS feed source can't be reached. Try again."
    Here is an example of how i'm inputing the RSS link:
    feed://feeds.bbci.co.uk/news/uk/rss.xml
    feed://www.france24.com/en/france/rss/
    Your help is much appreciated. Thanks

    If the widget does not work, search for alternatives.
    http://www.google.com/search?q=embed+rss+feed+in+webpage
    Found this one : http://feed.mikle.com/
    Paste the RSS link without feed:// and configure the result.
    Copy/paste the code in a HTML Snippet.

  • Installed the Creative Cloud for the desktop, but the window will not "populate" with any information at all.

    creative cloud problem - YouTube
    As I asked in the very short video: HELP

    Car-son please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html for information on how to resolve your current error.

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

Maybe you are looking for