A88X-G45 with win 7 64 profesional no sound after driver instalation

Hello,
I replaced my dead "mb" with new "A88X-G45 gaming" and also instaled "win 7 64 pro" and have realtech driver problem.
On fresh windows instalation sound is working but when i install my drivers given on cd or downloadwd from MSI site my sound is not working.
One moment sound icon in system tray in normal next when i try to do something like try config sound device it sitches to disabled.
If I try to open some program using driver says : no audio devices are installed, when i click repair in troubleshoot sound problems it say it is fixed,
but in a few sec if you try to do anything sound is back to disabled. If u go in speaker properties it say the device you are configuring has been removed.
When i deinstall drivers i have sound but offcourse i want my drivers to work properly my config :
BIOS - E7900AMS V1.0
MBO - A88X-G45
CPU - A10 7850k
RAM - 2x4 gb patriot viper 2400 mhz PC3 19200
HDD - wd5000 velociraptor 500gb 10000 r/min
GPU - 2x atiRadeon HD 5770 1gb ram each
PSU - corsair 700 gs
OS - win 7 64 professional
I even reinstalled windows thinking maybe problem was there, so no updates, fresh windows, driver reinstalation, tried step by step instalation, downloaded driver from site nothing worked, so am also bezerked by this problem and like m8 sad this is not my first pc am putting together. Tryed diffrent version of win 7 like ultimate still same issue. Everithing else is working perfectly.
So please help us solve this problem so we can enjoy our products, thanks!

Hi just bought the same motherboard this weekend. I also have the same problem with the sound driver. anyway later I will try to update my windows to SP1 and see what happened.
BIOS - Updated to latest version
MBO - MSI A88X-G45
CPU - AMD A10 7850k
RAM - 2x4 gb Kingston Hyper X Genesis 1866
HDD - Samsung 840 EVO 250GB
GPU - MSI R9 270X Gaming 2GB
PSU - Cooler Master Silent Pro M2 850w
OS - win 7 64 Ultimate

Similar Messages

I tried to install adobe reader in my PC with Win 7 OS 32 bit but after opting run nothing happens, please help

I tried to install adobe reader in my PC with Win 7 OS 32 bit but after opting run nothing happens, please help

installer
On Tue, Aug 19, 2014 at 12:21 AM, Pat Willener <[email protected]>

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I have a Pc with win vista. i have safari 5.1.7 installed. i want to know if there is an upgrade for safari. i heard about version 6 and 7.

I have a Pc with windows vista. I have safari 5.1.7 installed. I want to know if there is an upgrade for safari. I heard about version 6 and 7.

Since Safari for Windows is a little old now. some things may no longer display properly if the website creator moves to newer technologies not supported on older browsers. You are likely to see this in more and more sites as they update themselves.
I suggest using a more modern browser.

Message comes up on startup: You are unable to log in to the user account "terry" at this time. Logging in to the account failed because an error occurred. This is a late 2012 mac mini with a 64g SSD and 1 Gig hard drive installed. Help please!

As in title. I have tried resetting the password. Nothing works to get me past this problem. The computer was working fine before this happened.

I have just purchased this mini and it was wiped to a virtual new unit. I have done an install of the OS up to 10.9.5 and then installed my purchased software that is stored on iTunes through wifi. The computer was working fine although sometimes a bit slow. I have it set up with the SSD as the program drive and the 1T drive for data which I have no files on it yet. I am the only account on the computer so cannot log in on another account. I booted up holding the Alt key and then used the restore drive which brought up the Utilities window. I then opened Terminal and typed in "resetpassword" and then closed out and restarted the computer. It seems to recognize my new password but still gives me the same message as above.
I do have an Apple OS system 10.7 on USB if that needs to be used to reinstall the OS to fix the problem. Thanks for taking the time to help me with this problem.

I installed the latest version AND the beta and with both I have the same problem: After I install, they both work the way they should. When I turn off my computer and get back on later, Firefox is NOT "installed", according to my computer.

''locking as a duplicate of this - https://support.mozilla.com/en-US/questions/791340''
I installed the latest version first. When I was done, Firefox was working great. I got off and went back on to my computer later. Firefox was not there, but the shortcut was. I got this error that the item that referred to the shortcut was no longer there. I uninstalled. I tried the beta (4) and the same exact issue occured.

ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store.

Blue screen with sound after clean install

Hi Everyone,
I have just replaced the hard drive on my MacBook Pro A1226 Model. The install went fine when it finished all I get is a blue screen with the osx music in the background.
I have tried deleting the ApplicationEnhancer file using single user mode, I have tried removing all the ATI Extensions but still no luck. I was able to get the welcome video up once but was unable to select my country or continue. I have also tried to complete the install using safe boot but no luck.
Any ideas or help would be brilliant.
Thanks in advance

Safe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
osx music
Music plays on startup?

Toshiba G450 - modem error with Win Xp

Hello,
I have some issues with Toshiba G450 when i'm trying to use as a modem.
If the connection with modem is disconnected by low battery there is no way to reconnect after I recharged it. The only way to reconnect is to reinstall the Wellphone XT application.
I've laready tried with 3 pc's with Win XP SP 2 32bit, usb 2.0 installed, so I don't think there are windows errors.
Have someone same error like me when using XP ?
Any suggestions ?

Hello
Have you Users manuals for this device? I know stupid question but since 5 days nobody wrote a word about it. It is really interesting device but I never saw it anywhere and I believe most people use standard mobile phones as modems to connect notebooks to the internet.
Anyway on this forum I found http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=37749
Check this thread. Maybe you will find some answers there.
Good luck!

Is OBIEE 11g compatible with win 2003 sp2 64 bit OS

What is the difference between software only installation and enterprise install? Our company has win2003 sp2 64 bit OS on the server. Is it compatible to OBIEE 11.1.5 g.
Thanks,
Sushil

Hi,
There no compatible with win 2003 sp2 64 bit OS, you can install.for more refer BI Certification Matrix:
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
Simple Install :- Demonstration and Evaluation for Single-User Development .
software only install means it installs only the BI components not all the BI domain comoponents like java tools
Enterprise install :-Enterprise Deployment for Hosted Development and Production (this type enables you to specify several more configuration settings than the simple
FYI...
Software only install refer my blog and installation steps for Enterprise Installation
have a look for 4.5.2.3 Enterprise Install Procedure for New Installations on
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c4_installing.htm#CEGIAGBC
For diff between Simple and Enterprise Installations?
Refer: http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c2_scenarios.htm#CHDHFGEI
Thanks
Deva

Cisco UCS C220 MS SFF won't boot past BIOS screen with 2x1.2TB SAS drives installed

We have been running a few of these servers with only a 500GB 6GB SATA 7.2K drive installed with all VM's (Hyper-V) sitting on an attached SAN.
For various reasons we needed some local storage on the server and installed 2 1.2TB SAS drives (10K 2.5"). They hot installed okay but the server had to be brought down to enter the MegaRaid software to configure the RAID.
Unfortunately with the drives installed, the server won't boot past the initial BIOS screen and certainly doesn't get to the RAID screens.
Does anybody have any idea why this would happen? Is there some BIOS update required to support these drives and/or MegaRaid software upgrade?
The servers are up and running at the moment so I can't find the version of the RAID software running.
Thanks
Larry

Hi Lauren,
If you don't have a PCI or a mezzanine based controller and you are using the embedded raid controller you need a chip for the embedded raid controller to support SAS drives. By default the embedded controller only supports SATA drives. See page 9 of the link below
Please let me know if you are not using the embedded controller
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/C220M3_SFF_SpecSheet.pdf

HD7850 Crossfire with A88X-G45 issue

I am posting this in mainboard and graphics card areas as I am not sure where the problem lies at this point. In short, I cannot get the system to recognize both cards to enable crossfire.
I have the A88X-G45 Gaming board, and 2 MSI HD7850 cards, but for some reason the system seems to refuse to recognize the second card with or without the crossfire connector.
I have swapped the cards position and know both to be working, both cards have power, the system is not under powered at the PSU, I have updated the bios, I have stripped everything out multiple times and done it with one card and added the second after the fact etc... In short I have done everything I can think of to do yet it refuses to see both cards.
Any hints appreciated

On checking the bios I for this it was not set, and I have now also disabled the integrated graphics, still no joy.
It does not appear the board is detecting the second card at all as the board explorer in bios is not showing anything connected to the second PCI-E slot that is labels as a X8 slot.
I know the card is good, if I put them in one at a time in the primary slot they work fine.
I have the crossfire cable disconnected trying to get the system to see both correctly as ive read that what is needed.
I wasn't sure at first if this was a MB issue so I posted in that forum as well but it looks like the mod there removed it
any further help appreciated

Other CPU options for A88X-G45 motherboard

I am working on a new AMD build which includes the new A88X-G45 motherboard. I would like to use the new AMD Athlon X4 860K Quad Core, but see no info about it's compatibility with the A88X-G45. Also would like to know what coolers would work best for clearing the memory. The memory I plan to use is the G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000). Two of the towers I am considering have a 158mm cooler clearance
Thanks in advance for your assistance.

Hi,
About the new Athlon: it might work as it's still Athlon. However BIOS update might be required. Best if you ask MSI if BIOS will help it:
>>How to contact MSI.<<
My advice is that you look for different brand of RAM. GSkill are not working best with MSI boards, and there is big chance you will experience issues. I suggest Corsair, Crucial or HyperX. Apart from that, 2133Mhz won't give you any performance boost compared to much cheaper 1333Mhz RAM.
For memory clearance: I suggest you pick some low profile RAM and it will be a good way to go. Unless you have a window in the case and want to see it nicely, then some low profile cooler should be good. Can't say which one, as many are big enough to cover at least 1 RAM slot. Therefore low profile RAM would fit it most.

A88X G45 Gaming losing display signal

I have just rebuilt my computer. I elected to go with the A88X G45 gaming motherboard with an AMD A10-5800K Trinity Quad Core 3.8 GHz. G. Skill Ripjaws X Series 8 GB DDR3 SDRam 2133(PC17000) (2x4 GB).
When I start the computer, I do not hear any beeps at all which I found interesting. I log into the BIOS and it recognizes everything installed and which ports are being used. I am using the onboard graphics card until I get everything set up and then I will add a separate GPU. After installing Windows 7, I log on to update the drivers before doing anything else. I have done this 2 times, once from the DVD provided with the board and once from a flash drive downloading the current ones off the msi website. After installing the chipset drivers and rebooting back into the Windows desktop, the monitor will go blank and state "no signal." This happens between 15 seconds and 5 minutes. I have tried the DVI, VGA, and HDMI ports on the board and get the same result with all of them.
The lights on the board stay on and the fans are still running. The reset button and power button do not do anything and the only way to power down is to turn off the power supply, which I hate to do. The LED table that displays codes does not show anything as if it is off. My mouse and keyboard similarly shut off.
I have tried checking the RAM, updating the BIOS, removing everything except RAM, CPU and PSU and still get the same result. I have 5 fans plugged in including the CPU fan.
I am really at a loss here and cannot figure out why I keep losing display connection and having the board essentially lock up. Any advice is greatly appreciated. First time forum user.
Thank you.

Quote from: Nichrome on 26-September-14, 05:27:07
Hi,
Please follow this >>Posting Guide<< in more detailed way (PSU, OS etc).
Also did you try clearing CMOS? >>Clear CMOS Guide<<
Also when this started to happen? As which parts are new and which old.
Main Board: MSI A88X G45 Gaming
Bios Version: v1.2
Video Card: On board
PSU: Corsair 750W
12v rail Rating of listed PSU: Unsure
CPU: AMD A10-5800K Trinity Quad Core 3.8 GHz
Memory: G. Skill Ripjaws X Series 8GB DDR3 2133(PC17000) (2x4GB)
SSD/ HDD: Samsung 840 EVO 120GB SSD
CPU COOLER: Stock cooler that came with CPU
Raid Card:
Sound Card: On board
Any Additional hardware plugged into your system: LG optical
OC: (Yes / No) NO
Operating System: Windows 7 Home 64 bit
I have tried clearing the CMOS with the button on board but have not tried taking out the battery. Everything that is currently installed is brand new (Board, CPU, RAM, Optical, SSD) with the exception of the PSU. I have had the PSU for a few years and have not had any issue with it on my old build. I was using my old build 3 days ago, got the board, CPU, RAM, Optical, and SSD all the same day and installed it. When I am on the BIOS screen, the display connection stays on and I do not have any issues. Similarly, I do not have any issues when I run Windows in Safe Mode. Only when I log into Windows normally will the screen go blank and lock up the board.

MSI A88X-G45 Dual mode graphics help

Greetings I bought the A88X-G45 GAMING AC edition with an AMD 7850k APU, the Radeon gamer series 2133 DDR3 and the Sapphire R7 250 2GB
I would love to enable this amazing Dual mode that AMD so proudly shows but i get issues. and yes i googled myself to dealth before coming here.
First of all there is like NO Tutorials anywhere usefull to the MSI brand on how to dual mode your graphics. Heres is what i have done.
(1st) i watched this
(2nd) I installed the card and put my HDMI into the Cards output like shown. When i turned on the computer i got a windows 8 unsigned device error and had the choice to disable the support or run set up.. well you get one choice in the end cause it loops over till you disable windows 8 support.
(3) set the output to IGD and selected dual mode with a 2GB shared memory. save and reboot i also put my HDMI to the onboard output just like the video after reboot the computer shows the boot screen then the rotating circle as windows loads. Then Nothing a black screen. The computer is running but no display. just a black screen there must be a signal going to the monitor as there is no "NO Signal Detected" popping up it's just a black screen nothing more.
So i restarted the computer went to advanced settings and put the output to (PEG) saved and restarted the computer and all i got was "No Signal Detected" on my monitor so after after a while i rebooted the computer and put my HDMI to the card this time. All was good the computer boots and windows loads onscreen. I installed AMD Catatlyst 14.4 and it shows a dual mode option but says for best results i should use the primary graphics port. and the green arrow points to my APU but every time i try all i get is a black screen.
So MSI why do you not have proper detailed instructions on how to make this work. Thanks

I tried MSI R7 250 2GD3 OC and the dual graphic works when output from on-board VGA.
Did you set share memory as default setting?
I set it as default but did not see any issue.
Hope it is helpful info.

MSI A88X-G45 Gaming + 16GB G.Skill TridentX 2x8GB 2400mhz... Memory Missing...

Hello,
Im having a problem that i don´t know if it is CPU related or Board related...
I have today recieved the new memories...
The Gskill Trident X 2x8GB 2400mhz 1.65v 10-12-12-31.
So in total is 16gb of ram.
I putted on the board powered up... System recognized memory alterations and ask me to go to bios.
So far so good...
I went on bios an choosed the XMP on the board that correctly detected the timmings and voltage.
Saved and reseted.
I then entered again in bios and started to notice that only 8GB of my 16GB are visible to the system...
The board detect BOTH dimms, and even in board explorer they are marked on the slots, but i don´t understand where is the rest of the memory...
The board is an MSI A88X-G45 Gaming and im using the last bios 1.5.
I went to windows, and in CPU-ID it detects the 16gb of memory, but on task manager it says i only have 8gb available...
I can´t make any sense of this contraditory information...
Can anyone help me????
I have putted the memory on the recomended slot positions (2 and 4)
Please check pictures bellow...
Thanks in advance...
Best Regards,
LPC

Hello!
Well thanks for your interest and reply´s...
Responding...
I have allready done some clear cmos to no avail...
Also this is a KIT of 2. Its paired and its fully functional dimms (i have tested them solo).
This is the memory kit i have purchased...
Now i have some photos i have taken from the POST and inside of the BIOS.
There is a lot of information so bear with me on this please:
After a enter windows i run some aplications to show what i get here...
So.... whats going on here....
Best Regards,
LPC

A88X-G45 with win 7 64 profesional no sound after driver instalation

Similar Messages

Maybe you are looking for