AAE CS5.5 LAUNCH ISSUE

I needed to reinstall AAE CS5.5 after my PC crashed and installed new hardware. It installs 100% and launches correctly but after restarting or swtiching off and then starting again AAE will not launch. Right clicking on the shortcut does not help because there is no "open" to click on. AAE is also no longer under all programs. When checking in "uninstall programs" AE is there but no AE icon only a white rectangle. The only way to get AE to open is to uninstall and then ro reinstall again. Will appreciate some help on this one.

Make your system restore behave and check your user account. you have insufficient user privileges and cannot make permanent changes to your system.
Mylenium

Similar Messages

PS CS5 launch issue

When I launch Photoshop CS5 the New Document window is opening automatically. Not sure what happened to cause this. Any idea on how to disable it?
Thanks!
Scott

I image that with an accidental Save As without »Alpha Channels« checked it could happen, but that would switch to »As Copy« and should hardly happen unnoticable as that usually also adds » copy« to the name.
As a precautionary measure you could additionally use the alpha channels as Layers Masks for empty Groups to have them stored in the Layers, too. But that naturally does not address the original issue.

TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail. Please help

I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy. There are 5 Ipod devices in the house and we deperatly need to get this fixed.
Any help would be greatly appreciated
Robert

Refer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR.

CS5 launch problem - moved to Australia from GB

CS5 launch problem -
moved to Australia from Uk/GB, bought a new lap top in Australia and Photoshop will not open even though it's downloaded and Bridge etc works on new machine - Problem error message...
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 71 Unable to create directory "/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app" with mode 775
ERROR: 71 Command ARKCreateDirectoryCommand failed.
ERROR: 71 Unable to get permissions of "/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app"
ERROR: 71 Error rolling back command ARKCreateDirectoryCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Photoshop CS5: Install failed
ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
...Is there a fix?

Help ma boab did you migrate over your applications and settings from your old computer? It does appear the installer was unable to create the Adobe Photoshop CS5 folder since your current User account did not have sufficient access to either modify they Applications or Adobe Photoshop CS5 folder if it already exists.
If you migrated/copied any files or applications from your old computer then I would recommend running the uninstaller from the Applications/Utilities/Adobe Installers folder. Once you have uninstalled please run the CC Cleaner Tool prior to reinstalling Photoshop CS5. Please see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html for information on how to use the CC Cleaner Tool.

TS1717 What about the same issue happening on OSX 10.7.5? Troubleshooting freezes or launch issues...

What about the same issue happening on OSX 10.7.5? Troubleshooting freeze or launch issues...

Refer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR.

CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx

CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
When I click on the middle it takes me back to the desktop

Hi,
I would recommend posting this query in the Adobe Photoshop forum.
You will get a specific response relevant to this question.
Thanks

Anyone else upgraded to yosemite 10.10.1 and having launch issues (crashing) when opening CS6?

Anyone else upgraded to yosemite 10.10.1 and having launch issues (crashing) when opening CS6?
Need a fix!

Hopefully this helps: I had one plugin (Vectorworks) which I deleted and now it opens. Try deleting any plugins if you have any if you've run out of options. Took me hours to figure that out.
On a side note, Yosemite sucks. Spread the word.

ITunes 7.7 Launch Issue

Hi,
I had a working iTunes 7.6 installation on 32-bit Vista.
I've installed iTunes 7.7, which installed no problem and displayed the licence agreement screen to me. I then clicked 'Agree' and it went away.
I can see it running in my task manager, however see no GUI.
Rebooting the PC, 'fixing' the installation, uninstalling and reinstalling haven't helped.
I click the iTunes icon, it shows me the progress bar 'Loading iTunes Library', and then the progress window vanishes and I see no iTunes. It is, however, running in my task manager.
Does anyone have any suggestions?
Many thanks

Let's check to see first if this is a systemwide issue or if it is specific to a single user account.
Try creating a new user account (With full administrative rights) as per the instructions in the following document:
iTunes for Windows Vista: Troubleshooting unexpected quits, freezes, or launch issues
Now log out of the old user account and log into the new one.
Try launching iTunes in the new account. Does an (empty) library screen eventually come up, or do you get the same kind of behavior as you do with the the usual user account?

Acrobat and InDesign CS5 file issue

Hi everyone...
My issue is that Acrobat won't or can't convert InDesign CS5 files. It opens Illustrator and Photoshop and converts them to pdf's but not InDesign.
I've tried everything. I've even tried Adobe tech help. No luck. It was a relatively easy procedure in CS4, not to mention a time saver.
Is there someone that knows how to resolve this? Please help as I'm desperate to avoid having to convert all my InDesign files one at a time.

Hi Matthew-
Our workflow often involves combining multiple IND files into a pdf. With CS4, we merely opened acrobat, clicked "Merge Files into a Single PDF" and dropped in the indesign files we wished to combine. Presto- we had one PDF with all IND files put together without having to go through indesign.
In response to your post, I only have CS5 installed, and it seems as though Acrobat doesn't recognize ID CS5 as a program at all. I believe I am current on all InDesign and Acrobat 9 updates to date - I'm running InDesign7.0.2 and Acrobat 9.3.4.
When trying to open IND files through Acrobat, Acrobat launches and gives an error message that states: "Please select a file created by an application that resides on your computer."
Acrobat can't call InDesign CS5 to open at all. Could this be because Acrobat was not updated along with the CS5 suite and therefore doesn't recognize the new CS5 Indesign files?
I read another blog that mentioned it could be a registry problem- they ran CCleaner and ran the registry fix. Then uninstalled and reinstalled both Acrobat and Indesign. What are your thoughts on this method? It's hard for me to try this on my own, as it requires an administrative login- our IT department has us locked out. I would like another opinion before I ask them to help.
Do you forsee a fix from Adobe in the future?
Thanks for your help!
-Julie

DW CS5 odd issue - mmserverinfo.cfm

Hello, everyone.
I have CS5 installed on an Alienware Area 51 (Intel Core i7 2.80GHz - 12Gig RAM - Windows 7 Enterprise) and I'm having a few issues, one related to mmserverinfo.cfm.
Issue 1: If I have one or more files of any site open, then open a file that is outside of the site, DW runs excruciatingly slow for about 20 seconds as it "puts" a few files (one of them being mmserverinfo.cfm) every time I switch between any of the site files and the non-site file, and vice versa.
Issue 2: Every time I launch DW it becomes "Not Responding" for the first 30 seconds, or so, after the app is loaded and the splash screen disappears. If I click on anything in DW within that timespan, Windows attempts to discover what the problem is, then closes DW without reporting anything to me about what is wrong. I am also having this same issue with ColdFusion Builder 2.
Nothing else in the Creative Suite has this issue - Fireworks runs great, no problems.
Any suggestions?
Thank you,
^_^

Now a new issue has cropped up.
Whenever I try to close DW, regardless of clicking the X or going to FILE > EXIT, DreamWeaver will hang, CPU goes from nothing to 12%, and memory usage goes from 3GB to 4GB. I have to force DW to close.
^_^

Report Builder 3.0 launch issue in SharePoint Integration mode

Hello,
I'm facing issue when opening the report builder 3.0 tool. Report server is configured in SharePoint Integration mode. I already have the FQDN configured for report server and in SharePoint (AAM) but still it fails when the end user is trying to access
the report builder 3.0.
Just to brief on the instance setup;
SQL box setup
1. Windows Server 2012 R2 Standard/Enterprise edition with latest service packs and updates
2. SQL Server 2008 R2 Enterprise edition with all features except Reporting Services installed and configured
3. SQL Engine and Agent are configured in service account (domain account)
Web box Setup
1. Windows Server 2008 R2 Standard/Enterprise edition with latest service packs and updates
2. IIS enabled with all the features
3. SharePoint Foundation 2010 with SP2 installed in advanced mode and the database server is mentioned as above
4. Farm is configured with domain account (farm account)
5. Default site is configured with domain account (site account)
6. Authentication used for default site is NT domain accounts
7. AAM is setup for default site to use the FQDN (server.domain.com)
8. SQL reporting services is installed (only) with service account (same account used which is configured in the SQL engine and agent in database server)
9. Reporting Services add-in for SharePoint Foundation 2010 is installed
10. Reporting Services is configured to use the FQDN, email settings is configured
11. SharePoint Foundation 2010 is configured to use the Reporting Services (General Application Settings) by granting the access to database, integration the report server URL with windows authentication (used the SQL reporting services service account)
12. Report Web services when clicked, open the Reporting Services window properly where it shows the SharePoint default site URL and on click shows the proper folders configured for use for reporting services
13. Report Builder launch URL is specified as /_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application
14. IIS restart done, SQL Reporting Services restart done, even web server reboot done
15. When supplied the URL in browser as
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application it start the clickonce window but after this immediately throws the error message as below.
16. Also, I tried to open the Report Builder 1.0
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application it fails with same error message.
17. After debugging several times, I am unable to resolve the issue.
18. I tried re-installing the Reporting Services (first uninstalled, then reboot, then folder cleanup, then install Reporting Services) but no hopes and the issues remains same as "The remote server returned an error: (500) Internal Server Error."
19. Also, I tried with the fresh machine, wiped out the VM, installed OS, IIS, SharePoint Foundation 2010, SQL Reporting Services, etc. again no luck, the issue remains same as "The remote server returned an error: (500) Internal Server Error."
Error message when launching the Report Builder tool
PLATFORM VERSION INFO
Windows    : 6.1.7601.65536 (Win32NT)
Common Language Runtime : 4.0.30319.18444
System.Deployment.dll   : 4.0.30319.18408 built by: FX451RTMGREL
clr.dll    : 4.0.30319.18444 built by: FX451RTMGDR
dfdll.dll    : 4.0.30319.18408 built by: FX451RTMGREL
dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url   :
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX%20Report%20Models/XX%20Report%20Models/XXX%20XXX%20Report%20Model.smdl
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl resulted in exception. Following failure messages were detected:
  + Downloading
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
  + The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [9/19/2014 4:42:13 PM] : Activation of
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl has started.
ERROR DETAILS
Following errors were detected during this operation.
* [9/19/2014 4:42:16 PM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
  - Downloading
http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
   at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
   at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
   at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
   at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
options, ServerInformation& serverInformation)
   at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
options)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
  --- Inner Exception ---
  System.Net.WebException
  - The remote server returned an error: (500) Internal Server Error.
  - Source: System
  - Stack trace:
   at System.Net.HttpWebRequest.GetResponse()
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Thanks & Regards,
Mahesh Dhinge

I have resolved this issue as it was mainly due to the integration of reporting services to SharePoint Foundation.
Thanks,
Mahesh
Thanks Mahesh Dhinge

Photoshop CS5 Droplet Issues

So I have to pose this question to you all since we are having a rather massive problem at my work here with this. The company I am working for is a large automotive restoration parts company and we have 7 full vehicle catalogs. Here is a bit of the explanation to what is we are doing.
Basically what is happening is that we use droplets to convert images to CMYK profile for our printer, create a web jpg and thumbnail and place it in the appropriate folder for being transferred to our database. The action we are using for this is as follows.
Save For DB and Web
Save- to a location on our server
Convert Mode- RGB for web
Image size- to reduce the size for web
Export- as jpg for web
Image size- reduces size for thumbnail image for web
Export- adds _thumbnail behind part number
Close
We have 5 different droplets that do basically the same thing in the end. Our work flow here is nothing special but here is now it work. All images are placed on a server(Apple server running Snow Leopard Server 10.8.6) for use in our catalog(linked in to Indesign) all as EPS. For the web jpgs the images are transferred into a large folder which once a week or so we run a bulk loader in our database software for use with our website. Images are transferred to the web server and all is deleted once it database has the image imported.
Now here is the problem. Randomly the droplets will not make one or more of the files when it runs. Most of the time it is perfect and has no issues. Sometimes it will create the EPS and not the jpgs, other times it will create only the thumbnail and others just the EPS and web but no thumbnail. It is just random and across 5 different droplets(only difference between them is where the EPS is saved to, the jpgs are saved to the same place in all of them). We recently updated all the droplets to CS5 .app extension as before we though the issue was because we were running CS3 created droplets but the issue has not changed. I am running them on both an iMac and Mac Pro, both running Snow Leopard 10.6.8 and they both have this issue. I am running the latest version of CS5 with all updates(have CS6 on order and will be trying that shortly). No once else has this issue like I do but I am running the most images on the droplets to place in the database so I think that is why I am seeing the most errors. One of my former coworkers was having this issue for years before I worked here and he was having them until his last day here. I am at a loss but I have a feeling that it has to do with the Apple Server that the department is using. I am not an apple fanboi at all and dislike using apple products but it is what I have to do in order to get work done so I continue to do it. So unless the computer knows I dislike it and is doing this as a form of revenge it has to be something. I personally think it is the server but I wanted to though out there to see what others think it could be.
I decided to make new droplets from scratch and have them saved onto a difference server as well as the original to see if it is a server. The second server that I am saving to has been perfect, while the normal server that is supposed to be is having issues. The server is the same controller, but has different RAID banks. The second server is limited access to only me and the other photographer I work with and is just a backup server.
Anyone have any ideas on what is going on or has encountered this issue before?
Nick

Yes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel

Photoshop CS5 HDR Issues

Hi,
I've been using HDR with Photoshop CS5 for quite some time, and I'm now switching to CS6, but am having some troubles that I've never had before.
Here's a rundown of what's happening. First, I go to file -> automate -> merge to HDR
I then make the changes to gamma, exposure, etc. I leave the 16-bit and local adaptation alone; I've never changed any of that before. Someone mentioned how that could be an issue, but I never adjust any of that. After making the desired edits of colors, exposure, etc., I hit process. I'll show here what I get in the "preview" window where all of the work is being done, and then what the end result is.
Preview window:
What it comes up with after:
Any thoughts or ideas would be greatly appreciated!

Yes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel

CS5.5--Issues with audio from imported avi's & issues exporting

To Start, my laptop:
CPU: Intel® Core ™ i7-2330QM CPU @ 2.00 GHz
CPU Clock Frequency: 2.00 GHz
System Memory: 8 GBytes
Cache Memory: 1 MBytes/6 Mbytes
Manufacturer: Sony Corporation
Model name: VPCF226FM
BIOS VERSION: R1190V#
OS Version: Microsoft Windows 7 Home Premium
ME Version: 7.0.10.1203
System Type: 64-bit Operating System
I downloaded the 30-day free trial of Premiere Pro CS5.5 with all updates. To play with the program, for my own personal amusement, I wanted to edit together pieces from a bunch of avi videos that I know to play properly outside the program, tested on more than one computer.
At first, importing the files seemed to be no problem, making subclips as I went along.
However, as I continued to import files, there began to be a sound issue--sometimes the sound not being present till I was 1/3 of the way through the clip, sometimes the sound seemingly playing catch up with audio that should be earlier in the video appearing later, sometimes the sound wouldn't come up at all, and still other times I'd be, for example, on video 5 when pieces of audio from video 2 would start playing over the current video.
I initially thought it may just be a memory issue, working with many large video files.
But later, when I went to edit the subclips I made, I found that many of them no longer had sound, even if they did when I initially subclipped them.
Weirdly, in the timeline, there is no consistency, as clips will appear in the video track but only some show audio tracks too. But those with audio tracks don't always play audio and those that show NO audio tracks at all actually do play audio sometimes. Also, those that show audio tracks and don't play them sometimes will show waveforms, sometimes don't. A clip with no waveform may not play 95% of the time, but then occasionally will suddenly have the waveform and play a couple times before reverting back to no audio.
A suitable solution for this personal amusement project would just be to drop a new soundtrack over the thing but, before I even got that far, I tried exporting as avi's and mpeg4's but then get error messages such as:
Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-785]
Error compiling movie.
Unknown error.
In case it was a memory issue, I tried starting a new project, only importing 2 videos, but had the same audio and exporting issues.
I'm getting really frustrated as I spent a lot of time importing/subclipping and then even more time prepping before that.
For those who are bound to ask, while new to Premiere, I'm not a novice with editing. I've used Final Cut Pro at work for many years (without such issues).
Thanks for your help.

You might start at http://www.xvid.com/
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert SD (Standard Definition) files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/media-converter.aspx Digital Media Converter
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.videohelp.com/tools/XviD4PSP

Illustrator cs5 selecting issue in mountain lion

I'm having a strange issue using illustrator cs5 after updating to mountain lion. I have a line of text that I rotated and copied several times so it resembles an asterisc shape * (3 lines of type fanned out over a central point). When I select 1 line of type, 2 or more lines are selecting. It happens even if I try to click in an empty area of the file (white space). The kicker is that it even happens in outline view (even in the white space). Any help is appreciated.
Thanks

Not sure what is happening, but a workaround might be to put each line of type on its own layer, then lock and/or hide layers you don't want to select.
DS

AAE CS5.5 LAUNCH ISSUE

Similar Messages

Maybe you are looking for