Abaon with loss

hi,
same question as another post but this is losses.
from abaon i have this posting. it means the resale value is 500 and this amount i enter in manual value field in abaon.
70 LA08000 accum depre 2000
75 LA08100 asset (3000)
40 LA54090 clearing acct rev fr asset sale 500
40 LA69620 loss disposal tangible asset (1500)
from the sale, i create DN, the entries is
DR 20042 debtor 500
CR 54091 revenue fr sale of assets. (500)
my question is, what happen to LA54090 and LA69620?
it seems no setoff for clearing account and i do not know what happen to LA69620.
can advise?
thanks

Hi,
As I said in my previuos thread the Gain/Loss on Asset sale will go to the P/L account and Clearing Account for Asset Sale will clear against Sale account.
Plz assign points
Thanx,
Best Regards,
Edu

Similar Messages

C20/SX20: is there a way to get cdr with loss/jitter stats?

I try to get a cdr report with loss/jitter, but can not find a solution to do that.
a) TMS is able to report cdr but only on call participants/duration/encryption/protocol
b) C20 web gui has the information but only with a count of clicks and only for one call each time
c) C20 API (cli) I found some commands but nothing to get loss/jitter
   tried xstatus Diagnostics Call Channels -> only for active calls;
   tried xHistory CallLogs Recent | Call -> nothing usable
Is there a way to get cdr with jitter/loss counters for each C20/SX20 in a reporting format?

Are you at the latest TC 7 software version?    7.2.1 I believe
Not sure when it was added, but in the Web GUI, under call history...it shows summary info as 1 call per row , then you click the line and it will show detail...   I believe it shows Max Jitter values over the entire call, I find the Diagnostics/Call History easier to read than pulling the call log files

DNG with CS5 is always compressed with loss !

This is not up for discussion , but only as an FYI to all and every one out there using DNG in Photoshops Raw interface:
DNG done by CS5' s raw 6.x interface will make every DNG file compressed "with Loss" , its not lossless at all ...!!
To the Adobe Team :
....why dont you let us Pro's know about the Fact that your camera Raw 6.x interface will "Compress" an original DNG file
if a preview jpg is updated ( small option in the right top scroll down menu) within this Raw 6.x interface ?
...This is a huge Damage for a previous perfectly and integer (not compressed) DNG file, for your subsequent compression and re-saving of the DNG is
NOT lossless.....on top of the fact that you do NOT inform us of a "compression" step here , and that we are NOT given an option in your interface of raw 6.x for this NOT to happen, as in :...."do not compress" when update preview jpg
i have now destroyed 1500 DNG images , from a commercial client shoot,.. by updating all the DNG preview jpgs , ....all DNG files
now show noise and other artifacts, especially in the always so critical blue chanel,.....this is a shoot where the shoot budget was
over 50'000 $ !!...
i also can not open the DNG files anymore in its proprietary software anymore neither,.... sinar capture shop ,....since your raw interface compressed all DNG files... a step that was not asked for...a step that is NOT needed....EVER !
please everyone ,...spread this around !!

Ad Agency wrote:
...that when updating a preview jpg of a DNG in an open CS5 RAW interface window, CS5 will compress your underlying raw data....something you seem not to be able to read .....so i gather your english...which is ....i am sure ...the only one Language you speak on the other hand .... is definitely a language you need to learn how to read ,...at this point.... dont you think so ?
Wrong...updating a DNG preview will have exactly ZERO impact on the raw data of your file. You are quite wrong if you think this...seriously...do the research (which you claim to be able to do).
Ad Agency wrote:
...if you would have surfed the internet you would have seen my work.....and that's very serious stuff...serious GLOBAL stuff i do...compared to your work,...which seems to focus on books for amateurs....LOL
so i guess...yo dont really shoot for clients out there..right?
I saw your web site (it kinda sucks on mobile iPad BTW, might wanna look into HTML5 instead of Flash). I'm very familiar with the high anxiety and drama/trama of fashion photographers (actually, some of them are friends). You might wanna look at my own website www.schewephoto.com. Been there, done that, have the Tee shirt ya know?
Ad Agency wrote:
...so do yourself a favor here, and stay out of this forum.....you clearly dont belong here !
and yes...the postings are coming from 2 places...my ad agency,...and my shop as a Fashion Photographer , which i do for a good 20 years between Paris, London and New York.
and yes ...imagine this......i actually do research...and do the globally very respected photography stuff only for fun.....on the side ...of my real job: Research !
Well, am I talking to a photographer or ad agency? In my experience, ad agencies really DON'T have a clue about digital workflow...and NYC shooters tend to rely on digital techs. Maybe you are different (so far, the way you are behaving here indicates it's par for the course).
Ad Agency wrote:
...and lets see ...what do you do again?.....books....for wedding photographers?.....
stay out of here....
let the forum people here discover something very serious....without your tangent-distractions on sinar's' financials....or my 12 language skills and my PHD in Physics
grow up !
I'm pretty grown up...25 years+ award winning ad work. No, I don't have a PHD (personally, I've never met anybody with a PHD that could shoot their way out of a paper bag, but that's just my experience) but I do have a couple of degrees from RIT (highest honers BTW if that matters).
You wanna do dick measuring? I'm your guy bud...you chose the wrong guy to get down into the mud with.
Ad Agency wrote:
i will not respond to anyone anymore here ....period
not even to the guys who actually have serious questions to ask...
imagine this....because of people like you
...again!
Well, too bad...because something somewhere is whacked. If you think that by updating the DNG preview you are changing your raw image data, then it's all on you bud. The conversion from raw to DNG (except for a few formats that require Linear DNG conversion) is completely lossless. And what the heck do you care about updating the DNG preview? The only need to update the DNG preview is if you are using a 3rd party application that can't read the raw data (like some 3rd part database management apps).
Seriously dooode, you need to fix your attitude. If you come down off your high horse, you might be able to learn something. Otherwise I suspect you need to start hiring some digital techs that know a bit more about digital than you do (there are a lot of good ones in NYC, I would be happy to give you some names).
:~)
P.S. for the rest of the people reading this thread let me apologize in advance. The OP is a high strung fashion doode that is obviously flailing about and having some "issues" which are causing a degree of angst that is making the discussion a bit over the top.
P.P.S. You are right...I'm getting rid of my P-65+ back and getting an IQ180 back shortly...60 MP ain't enough, I want 80 MP...

Recovery of database with loss of archived logs

Hi,
I tried restoring the database using the standard practice, however, I am encountering errors. It looks like we are missing archive log files, but I am not sure. Could anyone provide more insight to this problem and how to recover the database?
Here are the steps we did.
SVRMGR> connect internal
Connected.
SVRMGR> startup
ORACLE instance started.
Total System Global Area 1117552144 bytes
Fixed Size 48656 bytes
Variable Size 291995648 bytes
Database Buffers 819200000 bytes
Redo Buffers 6307840 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SVRMGR> recover database using backup controlfile until cancel;
ORA-00279: change 663652622 generated at 02/13/02 06:20:02 needed for thread 1
ORA-00289: suggestion : /oraclesw8_redolog/ARCHIVE_CP/infr/infr_1_13598.dbf
ORA-00280: change 663652622 for thread 1 is in sequence #13598
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
Log applied.
ORA-00279: change 663654936 generated at 02/13/02 07:04:14 needed for thread 1
ORA-00289: suggestion : /oraclesw8_redolog/ARCHIVE_CP/infr/infr_1_13599.dbf
ORA-00280: change 663654936 for thread 1 is in sequence #13599
ORA-00278: log file '/oraclesw8_redolog/ARCHIVE_CP/infr/infr_1_13598.dbf' no longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00308: cannot open archived log '/oraclesw8_redolog/ARCHIVE_CP/infr/infr_1_13599.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oraclesw8_data00/oradata/infr/infr_system_01.dbf'

Hi
It looks like you may have to manually apply the last redo log.
SVRMGR> SELECT member FROM v$log l, v$logfile f WHERE l.group# = f.group# AND l.status = 'CURRENT';
Note the path of this log file.
SVRMGR> Recover database until cancel
When you get the message that you mentioned -
Apply the log member from the select statement above. Give it
the full path as it appears on the select statement.
SVRMGR> Alter database open resetlogs;
The system should respond with "Statement processed".
Good Luck,
Bob

Email accounts lockout along with loss of internet connection

email accounts (2) constantly being locked out with messages advising 'failed internet connection'. Address bar freezes when typing in web addresses and internet drops out/ freezes after a while when veiwing webpage. Server advises all connections are good and that I should contact Apple re Mac settings!! Any suggestions welcome please.

Thanks for that. I have done this previously but the problem reoccurs. The issue is intermitent so it is difficult to know if the problem still exists until it fails again.I had spoken to my server ( Fri 3 ) and the emails were working ok ( typing into the browser address bar froze at the time though ) and then today (Sat ) the emails went down again and the internet dropped out when veiwing webpages.

PSE-8 crash with loss of internet connection

PSE crashed when I temporarily lost an internet connection. Now, when I try to restart PSE (even after rebooting the computer and modem), the PSE welcome screen appears and says "gathering user data" but it never completes that task. If I click on "Organize" or "Edit" from the main menu while it is supposedly gathering data, I receive a message that PSE has crashed and a trouble ticket will be sent to customer support. Is this something I can fix from my end?

See this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#Reset_the_Organizers_online _services

Loss of sound during calls following updating iphone 4 with IOS5

I've recently updated my Iphone 4 with the IOS5 update. Since then I've had terrible problems with loss of sound on phonecalls. I can hear others but they cant hear me - loss of sound is patchy during a call. I've cleaned mic with a soft brush and rebooted but problem still exists. Any ideas before I restore factory settings/ and or take back to the shop?

I have a Iphone 4 and when i try to make calls, i cannot hear anything unless i put it on speaker, and sometimes if i try to turn the call volume up during a call without the speaker it almost sounds like the speaker is blown out. I just bought this phone online 2 days ago so i don't understand how that could happen.
Is anyone having this problem? I'm am totally lost with what to do other than return the phone in and see if i can get another one?
Please help!!!!!

Loss of wireless connection with 350n

I am having a terrible time with loss of connection with my 350 N wireless router. The router itself is on top of a bookshelf less than 50 feet away from both of my wireless desktops, and faces straight down the hallway that both rooms the computers are in open from. Often when I start up my computer it refuses to acknowledge that there is a wireless network present in the house and the only way I can make it detect it is if I powercyle the router--which is a pain. Even sitting directly next to the router it will never recognize better than 85% signal strength. And when I load (not play, just initiate loading) download-heavy content such as streaming video or an MMORPG program the connection will often drop and then reconnect seconds later. Upon performing a speed test it unfailingly indicates that my upstream is twice as fast as my downstream, which reads at only around 1165 Mbps--which is absurd as my modem is provisioned for and often surpasses 16000Mbps. What on earth is going on and what can I do to overcome it? I'm getting desperate here.

I have fixed my problem by upgrading the router firmware to version 1.03.7 from version 1.03.5.
The issue I had upgrading the router was it would fail at about 80% when using the router to do the upgrade soooooo, this is how I did it ( stolen from another thread )
Be warned! If you do the below and you have custom setting on the router you need to write those setting down first!!!!!!
1. Download tftp.exe using this link (ftp://ftp.linksys.com/pub/network/tftp.exe)
2. Download the new firmware (version 1.03.7) at Linksys download site
3. Reset your router by pushing and holding the reset button in the rear for 30sec
4. Configure a static IP address (192.168.1.50 with Subnet Mask 255.255.255.0) on YOUR PC
5. Connect a network cable from your PC to your router
6. Test that your PC is talking to the router by openning a DOS window and type "ping 192.168.1.1" (without the paranthesis) and you should get 3 replies.
7. Double click on the tftp.exe
8. Type in the IP Address for the Server: 192.168.1.1
9. Password is "password" (WITHOUT the paranthesis)
10. For the BIN file, click on the square-button and browse to the BIN file that you've downloaded from the LinkSys Site (WRT350N_1.03.7_US_code.bin)
11. Click on Upgrade
12. After the upgrade is successful, perform the reset, again. IMPORTANT!!!! PUSH AND HOLD THE RESET BUTTON FOR 30sec then let go.
13. POWER light should be blinking during boot up then stay SOLID
14. Now, change YOUR PC IP seeting back to what they were before you started this process.
15. Start InternetExploder and surf the net
16. GOODLUCK!!!
As soon as I did this, my laptop wireless started working 100% and right away.

HT3529 Issue with messaging and icloud after ios7.1 update. Need Help!!!

My husband and I have been having problems with our iphone 5c since the ios7.1 update. We can't seem to send messages to each other now without incurring data charges, because our icloud messaging seems to have both phones synced to my itunes account. I have tried logging into itunes under each of our user id and syncing our respective phones to them, but it is not working. Any Ideas on what to do to fix this?
When we updated last week on Friday, we had other problems with loss of ringtones, no calls coming through do to the do not disturb feature being fully enabled and no alert to incoming calls while phone is locked. Spent a good hour on the phone with support and didn't resolve, tried resetting, rebooting etc. We ended up in an apple store on Saturday, where the guy got the ringtones, etc. working, but disabled our messaging and when tryng to sign back in, we found both phones linked to my itunes account. Since then, having problems with messaging... At a loss as to what to do now.

Thanks. We did do all of that, and still kept having problems. I finally figured it out about 5 minutes after I posted. After signing each phone into respective itunes accounts and setting up all of the messaging features to sign into the same, I had to disable the "send as sms" feature inside messaging. Once I was able to force routing text messages addressed to his phone back through imessage from turning this off, my phone finally recognized his imessage seperate account and let the message go through properly. After a couple of tests, then I enabled the "send as sms" again, and it seems to be working fine.
This update has really been a pain, caused us several issues this go around.

No support from Adobe- going to have to make a complaint with Attorney General

I was recently in a fire (December 2010) and my Creative Suite Design Premium Student Edition was destroyed along with my new MacBook Pro. I have contacted Adobe since April 20111 to try to acquire a replacement and have had no luck. First off, I have received automated responses are that are not even a live person. For example, I explained my situation and that I obviously don't have my serial numbers anymore because they were detroyed in the fire. Adobe's response, here are your serial numbers, I am sorry you are having a hard time installing your software. Does that sound like a live person or perhaps a person that does not care.
Secondly, I submitted my proof of purchase (my mom had purchased the computer and Suite for me). All the information was available right on the sheet I submitted. They came back and asked me for the e-mail address of my mother so they could look up her student account. This was after I explained I was the student.
Also, I was informed by two people that I would need to fill out a letter of destruction and one person that told me I didn't. They also told me I could perform a platform switch since I know have a PC. However, when they finally got around to responding to my inquiry, they said it wasn't available anymore and I needed to upgrade to 5.5. Now mind you, I had CS5 and Cs5.5 came out in April. I have been contacting them since May, so they mean to tell me they have no more CS5 for PC? No, they are just trying to upsell, which would mean $399 for me.
I am very disgusted with the service at Adobe and the fact that they know they have a monopoly. They can have workers from other countries who live chat with you, and it takes 10 minutes for them to translate. Not to mention the fact that if you need support by phone your wait time is 40 minutes. They also have a tendency to close my cases even before they are resolved. I know there is a window of 5 days you have to respond in e-mail, which I have done, but they still close it when they feel like they don't want to be bothered.
Have you ever scene the movie, Rainmaker? This situation is like that movie. They deny all claims and even when someone keeps submitting they continue to deny, playing the odds that someone won't contact an attorney. They are totally in the wrong. There is no way you can say that they are right when they don't actually read e-mails and provide awful customer service. I feel sorry for the people that work at Adobe and think they have a good job. Look what your company stands for. This is why they are not listed in the Better Business Bureau.

You are not addressing Adobe here. This is a user to user forum. The only forum that Adobe has an official presence is the adobe.com forum:
http://forums.adobe.com/community/general/adobedotcom_feedback
Reposting there might generate a response from Adobe. I am sorry to here that you have suffered the loss in a fire. Never having been in a fire I cannot imagine what you have been through. I have suffered with losses due to flooding and that was bad enough. Adobe may not have a legal responsibility to help you, but maybe Adobe will help if for no other reason than the goodwill it will generate.

Losing keystrokes in windows 8.1 with browser open

I'm having a couple weird problems with loss of keystrokes in windows 8.1. Not sure if it's a driver or malware issue.
Right after I installed windows 8.1 I noticed that if a browser window is open, i lose keystrokes in any application.
This happens with both Chrome and I.E.
And the keystrokes that are lost can be in any random edit control, notepad, typing keys into google search, photoshop
etc.
And in fact, it's particularly annoying in photoshop because many of photoshop's tools and menus are invoked using alt | shift | ctrl sequences. What often happens is that I use a modifier key such as alt and the keystroke interruption occurs and windows never
notices that I've taken my finger off the alt key so after that, every keystroke is interpreted as an alt-key sequence until I notice it and re-toggle the alt key.
Note, this only happens when a browser window is open and even though it made no sense, I swapped keyboards, lol. Problem still occurs.
I tried uninstalling crashplan and AVG (currently using windows defender).
I have disabled google-now and all notifications from facebook, etc.
The reason I know the keystroke loss is from facebook or email messages is that when I had the original problem, it was always accompanied by the audio "Ding" that windows 8.1 gives you when a message comes in. I since disabled audio for windows events
but it's not actually the audio causing the problem.
I was not having this problem prior to installing windows 8.1.
The computer is an i7-3820 with 32gb memory, 256gb ssd, 2tb secondary drive running 64 bit.
I have run full scans with AVG, Defender and Malware bytes.
I'm going to try runing a root kit scanner today. What would you recommend my next steps?
I'm considering just formatting the whole thing and going back to windows 7 pro...
Any thoughts would be appreciated...
Update, root kit scanner found nothing.

Hi，
I sugegst you check settings under Control Panel\All Control Panel Items\Ease of Access Center\Make the keyboard easier to use, when a setting under that pane is turned on or turned off, it usually plays a sound or displays a message. sounds like the
situation you described here.
Meanwhile, please aslo keep the latest drivers for the keyboard.
Yolanda Zhu
TechNet Community Support

Trading Partner in Gain and Loss from valuation

Dear Friends,
My issue is with the valuation posted for account maintained on line item basis only (Not open item managment). Since the account is maintained on line item basis, only balance is valuated each month thru f.05.
The problem is that when account posted with Loss or Gain each month on valuation, the document will not have a Trading partner assigned which causes my inter-company elimination issue.
How to get Trading partner assigned to document posted on valuation (F.05) I have tried sustitution rule and OB32 to make Trading Partner as editable but SAP does not allow both.
Best Regards
VK

Thanks Venkata,
My problem is with the autmated posting result from forex gain or loss when carrying F.05. These documents autmatically created but donot update the Trading Partner. I can not manually input them even if enter Trading Partner is option in OBA7 is checked.
Best Regards
VK

File adapter with archiving option

hello,
i am using a file adapter sender with archiving option, sometimes this communication channel fail, it said not is possible archiving file...i change anything in the channel, I leave it as it was and active and then it works, what can be caused this?
thank you

Hi,
sometimes this communication channel fail, it said not is possible archiving file...i change anything in the channel, I leave it as it was and active and then it works
It shouldn't be the problem with the authorization as "unable to archive" error comes once in a while. There can be some problem with loss of network, which might be creating this error.
A detailed error message will be helpful to assist you.
Regards,
Neetesh

Pop up window with yes & no push buttons

hi
i want to display a pop up window with yes & no push buttons
can anyone help for this

Hi,
call function POPUP_TO_CONFIRM
exporting
TITLEBAR = pop_up' (for pop-up header)
TEXT_QUESTION = 'do you want to save data'
TEXT_BUTTON_1 = 'Yes'
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'No'
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = ' '
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE = ' '
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
importing
ANSWER = ANS
OR.
Use POPUP_TO_DECIDE.
call function 'POPUP_TO_DECIDE'
       exporting
            defaultoption = '1'
            textline1      = text1
            textline2      = ' '
            textline3      = text-202
            text_option1   = 'YES'
            text_option2   = 'NO'
            titel          = text-114
            start_column   = 15
            start_row      = 6
            cancel_display = ' '
       importing
            answer         = zanswer.
hope this helps.
plz take a look on this function modules also:
POPUP_TO_CONFIRM_LOSS_OF_DATA Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT Create a dialog box in which you display a two line message
thanx,
dhanashri.
Edited by: Dhanashri Pawar on Aug 19, 2008 2:20 PM
Edited by: Dhanashri Pawar on Aug 19, 2008 2:25 PM
Edited by: Dhanashri Pawar on Aug 19, 2008 2:26 PM

For the Pro's: Experience with Carbon Copy Cloner

Hi everybody,
I am a professional musicproducer. I use my MAC (G5, 2,7MHz DP 4GB RAM) every day many hours as my main working tool. So I cannot afford a loss of my system disc. If the disc fails some day, I do have to have a copy of it, that I can connect and go on working immediatedly. CCC is the perfect tool and i thank Mike Bombich for this efforts.
My tests were as follows:
After having cloned the system disc to a firewire drive successfully, I checked that I can boot from that drive, as long as the system disc is still in its place, connected and working.
Then I tried the worst case scenario: I plugged my system disc off (bus- and powerplugs pulled out), simulating a harddisc crash with loss of the complete drive, and looked what happens. You have to press the "Option" key during power up of your MAC, and the system will search and show the available drives. I marked the cloned system and started. It worked! Everything looked the same as with a start from the internal drive.
My question was: what exactly works and what not? Here is my report (I checked only LOGIC PRO 7.1.1):
I can start the programm, I can open all of the songs - with some restrictions. A logic song has a lot of links to a lot of audio files. In my case, EXS instruments and EXS samples are on the internal drive, recorded audio is on a seperat drive. Logic of course can not find those on the (no more existing) internal drive any more, so I am asked to perform a search. But after all, the song is complete and working. The entries in the Project Manager database, that show the dependencies of instruments, songs and audiofiles, point to the internal drive - so the Project Manager is of no use anymore. But in practice, this is a minor problem.
Now to my next question, concerning authorisations: I tried the "Waves" plug-ins: Yes, they work! And I tried the plug-ins of UAD, (they use a PCI DSP card): they work too! Only with the TC-Electronic plug-ins I was not successful, i got an "Error -1" - whatever that means. (I forgot to check "Autotune")
All told, I am very happy with the Copy Cloner! It is "the" application for my purpose! Thanks again to Mike and Andreas!
Thomas

My own tests were less than satisfying: third-party plugs (in my case, NI) often don't like you messing with the disk they're installed on.
After I restored to a clone, the B4 plugs, for me, refused to work. They demanded a reinstall (which, as all NI users know, is a royal PITA).
In my case, having to reinstall a particular plugin was not the end of the world... after all, 45 minutes lost is better than rebuilding a system from scratch.
But the lesson remains: an "exact clone" of your disk is never a 100% guarantee of immediate uptime, as you too discovered.

Abaon with loss

Similar Messages

Maybe you are looking for