ABAP webservice testing - step bye step guide

Could any one point me to any good resource for testing an ABAP web service? What are the pre-requisites I have to check to test a web service?
It would be great if anyone could point me to a step-by-step guide for ABAP web service testing in SAP version 7.0.
( As I am not a developer and new to this web service area. I do not need to develop a web service but i would like to know the steps we follow when we test a existing or custom developed web service in our systems)
Thanks,
Himadama

Hi,
The given Document is helpful to me.
But in My ECC 6.0 SP18.WSConfig and WSADMIN Transaction codes are Absolete.
New Transaction code SOAMANAGER We get the exposed Webservice.
But What the Problem is We forget some things while creating Webservices.
We are getting the Error While Testing Webservice Under Wsnavigator Of Portal.
I Am getting Below Error
An error has occurred. Maybe the request is not accepted by the server:
Connection refused (errno:239)
The above ABAPWebservice i consumed in Webdynpro.After Deploying i will get the error.
Exception on execution of web service on destination 'DEFAULT_WS_EXECUTION_DEST' for operation 'ZK2GenProjInfo' in interface 'z_k2_gen_proj_info'
I Am in confused State What I Will Do.
I Am Thinking the Webservice is not correct.
And also We have some Internet Webservices.
https://usint.skire.com/ws/services/mainservice?wsdl
the above Webservice Protocol is https.
But Our Portal Run under http.
Thanks
Subba Rao

Similar Messages

Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)

Hi Everyone,
This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
Hope this helps ;-)
Thanks,
Henry Wu
Instructions on how to use Oracle10gR2 Webservice Call-Out feature (Oracle JAX-RPC DII - Dynamic Invocation (DII) APIs)
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download 10.1.3.1 Callout Utility for 10g (R1 +R2) RDBMS (ZIP, ~13MB)
http://download.oracle.com/technology/sample_code/tech/java/jsp/dbws-callout-utility-10131.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131
3. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
3.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Prepare the database
1.1 Connect to SYS account (or any account that can connect as SYSDBA)
1.2 alter system set shared_pool_size=96M scope=both
1.3 alter system set java_pool_size=80M scope=both
1.4 ALTER USER SCOTT ACCOUNT UNLOCK;
1.5 ALTER USER SCOTT IDENTIFIED BY "tiger";
1.6 ALTER USER SCOTT QUOTA UNLIMITED ON USERS;
1.7 GRANT PUBLIC TO SCOTT;
1.8 GRANT Create Public Synonym TO SCOTT;
2. Load Oracle SOAP client to SCOTT (for Oracle 10g Release 2 Database)
2.1 Commands
2.1.1 Open command prompt (cmd.exe)
2.1.2 loadjava -u scott/tiger -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\webservices\lib\soap.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\lib\dms.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\jlib\javax-ssl-1_1.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\servlet.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\mail.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\activation.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\http_client.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\ejb.jar
2.1.3 It will take around 3 minutes and you will see "something" like the following when it completes (count may not be exact) :
Classes Loaded: 909
Resources Loaded: 75
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 0
Classes skipped: 0
Synonyms Created: 984
Errors: 0
2.1.3 Close this command prompt
3. Load Oracle JAX-RPC client to SYS (for Oracle 10g Release 2 Database)
3.1 Commands
3.1.1 Open command prompt (cmd.exe)
3.1.2 loadjava -u sys/oracle -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientws.jar C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientdb102.jar
3.1.2.1 It will take around 15 minutes and you will see "something" like following when it completes (count may not be exact) :
Classes Loaded: 4027
Resources Loaded: 81
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 61
Classes skipped: 0
Synonyms Created: 4108
Errors: 0
3.1.3 Close this command prompt
4. Execute UTL_DBWS packages to SYS (for Oracle 10g Release 2 Database)
4.1 Commands
4.1.1 Connect to SYS account only
4.1.2 Execute the following (in TOAD you should execute them as Script, press the "thunder" button)
4.2.1 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_decl.sql"
4.2.2 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_body.sql"
4.2.3 CREATE PUBLIC SYNONYM utl_dbws FOR sys.utl_dbws;
5. Call-out a free Web Service using SCOTT
5.1 Commands
5.1.1 Connect to user SCOTT with password of TIGER
5.1.2 Copy and Paste the following "Anonymous Block" (sample #1) and execute it :
5.1.2.1 It sould return "PL/SQL DII client return ===> Redwood City"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://webservices.imacination.com/distance/Distance.jws';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'DistanceService');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://webservices.imacination.com/distance/Distance.jws?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'Distance');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := utl_dbws.to_qname(l_namespace, 'getCity');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
utl_dbws.add_parameter(call_, 'zip', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('94065');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
5.1.3 Copy and Paste the following "Anonymous Block" (sample #2) and execute it :
5.1.3.1 It should return "PL/SQL DII client return ===> twelve thousand three hundred and forty five"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://www.dataaccess.com/webservicesserver/';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'NumberConversion');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'NumberConversionSoap');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'NumberToWords'
operation_qname := utl_dbws.to_qname(l_namespace, 'NumberToWords');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <operation name="NumberToWords">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle'
-- cannot find xml tag 'encodingstyle', so we just use the following as the generic encoding style
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
-- although 'document' was used, it produced an error, thus we will use 'rpc'
-- this value is generally only 'document' or 'rpc'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- thus the return type is 'unsignedlong', removing 'xs:'
-- however, upon testing, using 'unsignedlong' produced an error, while 'string' did not, so we will use 'string'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- the element name is 'ubiNum', thus we put in 'ubiNum'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the utl_dbws package
utl_dbws.add_parameter(call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('12345');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following guide http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
I could still not load Oracle JAX-RPC client to SCOTT (step 4) as it produces an error. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=633219&tstart=0
Also, I could not consume some of the other free Web Services out there for reasons I don't know, hope someone can help clarify. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=630733&tstart=0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Instructions on how to use Oracle10gR2 Webservice Call-In feature
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Connect to SYS account and create user STORE
CREATE USER store IDENTIFIED BY store;
GRANT connect, resource TO store;
2. Connect to Oracle using the user STORE and password STORE
CONNECT store/store;
3. Execute the following objects for this excercise
CREATE SEQUENCE order_sq;
CREATE TABLE product_types (
product_type_id INTEGER
CONSTRAINT product_types_pk PRIMARY KEY,
name VARCHAR2(10) NOT NULL
CREATE TABLE products (
product_id INTEGER
CONSTRAINT products_pk PRIMARY KEY,
product_type_id INTEGER
CONSTRAINT products_fk_product_types
REFERENCES product_types(product_type_id),
name VARCHAR2(30) NOT NULL,
description VARCHAR2(50),
price NUMBER(5, 2)
CREATE TABLE customers (
customer_id INTEGER
CONSTRAINT customers_pk PRIMARY KEY,
first_name VARCHAR2(10) NOT NULL,
last_name VARCHAR2(10) NOT NULL,
dob DATE,
phone VARCHAR2(12)
CREATE TABLE orders (
order_id INTEGER
CONSTRAINT orders_pk PRIMARY KEY,
product_id INTEGER
CONSTRAINT purchases_fk_products
REFERENCES products(product_id),
customer_id INTEGER
CONSTRAINT purchases_fk_customers
REFERENCES customers(customer_id),
quantity INTEGER NOT NULL
INSERT INTO customers (
customer_id, first_name, last_name, dob, phone
) VALUES (
1, 'John', 'Brown', '01-JAN-1965', '800-555-1211'
INSERT INTO product_types (
product_type_id, name
) VALUES (
1, 'Book'
INSERT INTO products (
product_id, product_type_id, name, description, price
) VALUES (
1, 1, 'Modern Science', 'A description of modern science', 19.95
COMMIT;
CREATE OR REPLACE PACKAGE dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2;
END dbfunc;
CREATE OR REPLACE PACKAGE BODY dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2 IS
v_customer_count INTEGER;
v_product_count INTEGER;
v_order_id INTEGER;
BEGIN
-- count the number of products with the
-- supplied p_product_id (should be 1 if the product exists)
SELECT COUNT(*)
INTO v_product_count
FROM products
WHERE product_id = p_product_id;
IF v_product_count = 0 THEN
RETURN 'No such product';
END IF;
-- count the number of customers with the
-- supplied p_customer_id (should be 1)
SELECT COUNT(*)
INTO v_customer_count
FROM customers
WHERE customer_id = p_customer_id;
IF v_customer_count = 0 THEN
RETURN 'No such customer';
END IF;
-- get the next value from orders_sq
SELECT order_sq.nextval
INTO v_order_id
FROM dual;
-- place the order
INSERT INTO orders (
order_id, product_id, customer_id, quantity
) VALUES (
v_order_id, p_product_id, p_customer_id, p_quantity
COMMIT;
RETURN 'Order placed with id of ' || v_order_id;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RETURN 'Order not placed';
END place_order;
END dbfunc;
4. Install and Configure OC4J
4.1 Change Directory
4.1.1 Open command prompt (cmd.exe)
4.1.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\bin
4.2 Configure Environment variables (type in command prompt)
4.2.1 set JAVA_HOME=C:\oracle\product\10.2.0\db_1\jdk
4.2.2 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
4.3 Starting OC4J for the first time
4.3.1 oc4j -start
4.3.2 If this is not your first time to "start" oc4j, go to step 4.3.4
4.3.3 Set oc4jadmin password (use the password "oracle" w/o the quotation marks)
08/03/21 17:13:54 Set OC4J administrator's password (password text will not be displayed as it is entered)
Enter password:
Confirm password:
Confirm password: The password for OC4J administrator "oc4jadmin" has been set.
08/03/21 17:14:01 The OC4J administrator "oc4jadmin" account is activated.
4.3.4 OC4J has started if you see the message :
08/03/21 17:14:16 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
4.3.5 Leave this command prompt open
4.4 Configure Data Source
4.4.1 Open a new command prompt via the cmd.exe command
4.4.2 type "hostname" and then press enter
4.4.3 Keep this command prompt open for later use
4.4.4 Open Windows Explorer and navigate to the folder C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
4.4.5 Open the file data-sources.xml
4.4.6 Modify and Save the file so that it will look something like the following :
4.4.6.1 Note that "hpv2710us" is my hostname found in step 4.4.2
4.4.6.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="store"
password="store"
url="jdbc:oracle:thin:@//hpv2710us:1521/ORCLDEV">
</connection-factory>
</connection-pool>
4.4.7 Close the text editor
4.4.8 Close the Windows Explorer
4.4.9 Close this command prompt (type exit)
5. Publishing a PL/SQL Package as a Database Web Service
5.1 Create the config.xml file
5.1.1 Open Notepad.exe
5.1.2 Copy and Paste the following :
5.1.2.1 Note that "hpv2710us" is my hostname found in step 4.4.2
5.1.2.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<web-service>
<display-name>PLSQL Web Service</display-name>
<description>PLSQL Sample</description>
<destination-path>./dbfunc.ear</destination-path>
<temporary-directory>/tmp</temporary-directory>
<context>/plsqlsample</context>
<stateless-stored-procedure-java-service>
<jar-generation>
<schema>store/store</schema>
<db-url>jdbc:oracle:thin:@hpv2710us:1521:ORCLDEV</db-url>
<prefix>db.func.place.order</prefix>
<db-pkg-name>dbfunc</db-pkg-name>
</jar-generation>
<uri>/dbfunc</uri>
<database-JNDI-name>jdbc/OracleDS</database-JNDI-name>
</stateless-stored-procedure-java-service>
<wsdl-gen>
<wsdl-dir>wsdl</wsdl-dir>
<option name="force">true</option>
<option name="httpServerURL">http://localhost:8888</option>
</wsdl-gen>
<proxy-gen>
<proxy-dir>proxy</proxy-dir>
<option name="include-source">true</option>
</proxy-gen>
</web-service>
5.1.3 Save file as config.xml in the directory C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
5.1.3.1 Note it should be config.xml and not config.txt
5.1.4 Close the text editor
5.2 Publish dbfunc Oracle Package as a Web Service
5.2.1 Open a new command prompt via the cmd.exe command
5.2.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home
5.2.3 mkdir ear
5.2.4 CD ear
5.2.5 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
5.2.6 set CLASSPATH=.;%ORACLE_HOME%\webservices\lib\wsdl.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\soap\lib\soap.jar
5.2.7 java -jar %ORACLE_HOME%\webservices\lib\WebServicesAssembler.jar -config C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config\config.xml
Please wait ...
STORE.DBFUNC
5.2.8 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -deploy -file C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\ear\dbfunc.ear -deploymentName dbfunc
08/03/21 17:46:23 Notification ==>Application Deployer for dbfunc COMPLETES. Operation time: 296 msecs
5.2.9 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindWebApp -appname dbfunc -webModuleName dbfunc_web
5.2.10 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindAllWebApps -appname dbfunc
5.2.11 Close this command prompt (type exit)
6. Test dbfunc Web Service
6.1 Restart OC4J
6.1.1 Open the command prompt you used to start OC4J in step 4.1.1/4.3.1
6.1.2 In the keyboard, hit Ctrl+C
6.1.2.1 Type "Y" and then hit Enter
08/03/21 18:02:51 Shutting down OC4J...
Terminate batch job (Y/N)? Y
6.1.2.2 Note that the command prompt should still be open
6.1.2.2.1 If you accidentally closed the command prompt just do the following
6.1.2.2.1.1 Do 4.1.1 to 4.2.2 and then proceed to 6.1.3
6.1.3 oc4j -start
Starting OC4J from C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home...
08/03/21 18:07:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
6.1.4 Leave this command prompt open
6.2 Use the Web Service to "Order an Item"
6.2.1 Connect to Oracle using the user STORE and password STORE
6.2.2 select * from orders
6.2.2.1 Zero row should return
6.2.3 Open Internet Explorer
6.2.4 Navigate to http://localhost:8888/plsqlsample/dbfunc
6.2.5 Input the following :
6.2.5.1 param0 value: 1
6.2.5.2 param1 value: 1
6.2.5.3 param2 value: 10
6.2.6 Click the Invoke button
6.2.7 A pop-up window will appear having the following contents :
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <SOAP-ENV:Body>
- <ns1:placeOrderResponse xmlns:ns1="http://db.func.place.order/dbfunc.wsdl" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:string">Order placed with id of 1</return>
</ns1:placeOrderResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
6.2.8 Go back to SQLPLUS or Toad and execute "select * from orders" again
6.2.8.1 There should be one row
ORDER_ID, PRODUCT_ID, CUSTOMER_ID, QUANTITY
1, 1, 1, 10
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following article by Jason Price http://www.oracle.com/technology/pub/articles/price_10gws.html

Success!!!
I had to grant this permissions:
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'setFactory', '' )
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.util.PropertyPermission', 'HTTPClient.socket.idleTimeout', 'write' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', 'localhost', 'resolve' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', '127.0.0.1:8084', 'connect,resolve' );
As I wrote earlier, WS_TEST is my user into which I load JAX-RPC client. Note that, if you load JAX-RPC client into user another than SYS, you have NOT to use -s -grant public option (wassam wrote about this too). Another thing is that I (finally) didn't load OC4J. To consume WebService I use utl_dbws.invoke(call_Handle CALL, request SYS.XMLTYPE) function.
voytec001

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Step-by-step guide to upgrading a MacBook Core Duo from 802.11g to 802.11n.

Hardmac.com has post a step-by-step guide on how to upgrading a MacBook Core Duo from 802.11g to 802.11n using an 802.11n card from the Mac Pro desktop. The upgrade was also tested and confirmed to work with the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't also work with the MacBook Pro.
http://www.hardmac.com/articles/71/

Hardmac.com has post a step-by-step guide on how to
upgrading a MacBook Core Duo from 802.11g to 802.11n
using an 802.11n card from the Mac Pro desktop. The
upgrade was also tested and confirmed to work with
the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't
also work with the MacBook Pro.
http://www.hardmac.com/articles/71/
Gino,
Interesting how the Apple 802.11n Enabler installed on the MacBook with no problems using the CD that comes with the AirPort Express.
I must try that.
Thanks for the post!
William

PI 7.1 step by step guide

Hi Experts,
Can u give me a link to a step by step guid efor file to file scenario in PI 7.1
right from SLD config to development to testing..
thnks in advance

You can always search on sdn... here is the link for xi3.0 which I think will help you
https://wiki.sdn.sap.com/wiki/display/XI/FLAT%20FILE%20TO%20FLAT%20FILE

Quick VPN step-by-step guide!

Hello.
Can someone please provide a step-by-step guide on how to configure the SA-520 for Quick VPN Access? The manual doesn't describe this scenario at all, so please someone give me instructions how to set the IKE and VPN policy so that Quick VPN can connect. I don't need any IP validation or anything, I just need it to work and take it from there...
Thanks! Artur

Like Mr Roe explained you may need to call into the office and let an agent test the connection for you. However here are some quick steps that you need to take to get the quick vpn configured.
1. You will need to access the set up screen for your SA520- You then need to click on the VPN tab.
2. Select IPSEC Users. There you will find a drop down arrow box select CISCO QUICK VPN.
3.The Menu option may change slightly. A warning message will appear that you will need to make sure that the LAN subnets are different from your local and remote side.
4. There will be another warning message advising you to enable remote management. You can find this area under the NETWORK MANAGEMENT TAB.
You will enable remote management from this page, by simply checking the box. you will need to grant access type by allowing all ip addresses or by range of addresses or for a particular PC which ever fits your need. All IP addresses is what I tested my VPN connection with and it was successful. The port you will use will be port 443. After you have configured this page save your settings.
5. Now that you have verified that all of your basic setting needs are taken care of now you can return to the VPN tab and create your user's and assign passwords for there connection.
6. Again you will choose the CISCO QUICK VPN from the drop down box and then assign your users.
7. For the users who will be accessing this connection they will need to have downloaded the cisco quick vpn client from our websight to utilize this type of connection. The version number for this QUICK VPN CLIENT is 1.4.1.2.
8. All users who try and access this quick VPN connection will need to have the QVPN client Utility saved on there desktop for access.
hope this was helpful.

Has anyone got a simple step by step guide to app uploading

I have just had my app developed and the company who has developed it for me has left me to upload it - struggling big time, any step by step guides?

It's not simple. It requires patience and attention to detail. Avoid being creative, don't skip steps or procedures you don't understand. Take notes and have a tested and reliable backup in place.
Dev Guide:
https://itunesconnect.apple.com/docs/iTunesConnect_DeveloperGuide.pdf
Portal Resources:
Program User Guide
https://devforums.apple.com/

Operating system reload step-by-step guide

It's that time again, time to wipe and reload the OS hard drive. Too many bugs - Safari crashing for no apparent reason, system locking up instead of sleeping, general running slow, etc.
What I need is a step-by-step guide to backing up current data so that I can restore the system once I'm done reloading. Anyone have such a beast?
One side comment: I have a second hard drive partitioned into 3 sections. My music and most of my data files reside on it. There are a few data files I need to move to it when I back up.
Also, my primary drive is partitioned with OS 9 and OS X on each partition. I don't plan on reinstalling OS 9. I'm just going to reformat the OS X partition.
Thanks for any help you can give.

Backing Up
Get an external Firewire drive with sufficient space to store the entire size of your hard drive. Whether you use a separate drive or partition of a drive do the following:
1. Open Disk Utility from the Utilities folder.
2. Select the startup volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup volume to the Source entry field.
5. Select the backup volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination.
7. Double-check you got it right, then click on the Restore button.
Next, test the clone by booting from it. Restart the computer and immediately after the chime press and hold the OPTION key down until the boot manager screen appears. You should see an icon for the external drive's backup partition or the drive itself. Select it and then click on the large right arrow button. If this does not work then restart the computer. After restart open System Preferences and choose Startup Disk. Select the clone partition from the icon list, then click on the Restart button.
Last, install OS X.
For more on backup and restore see: How to Backup and Restore. Also, visit The XLab FAQs and read the FAQ on Backup and restore.

Documentation or step-by-step guide for any transaction.

Hi i have just finished ABAP Training.i want to learn more and more transaction myself.but whenever try to learn any new transaction it seems very hard as confused with many functionality.For ex.if i want to learn SM36 transaction which is related to scheduling background jobs.i want some guidance to learn more transaction.Where do i get documentaion about that transaction or step-by-step guide.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Jan 7, 2012 10:20 PM

wrong place mate. this is not a training forum, yes you can search with the key words in SDN and you will find WIKIs which will kind of serve you for training guide.
just google it. you will find a lot of stuff in web. or even help.sap.com would help you with almost every thing you wanna know,
this forum will come handy when you are stuck with something.
happy learning

Step be step guide

Hi Experts, can anyone please send me step by step guides for middleware and sales? I mean the actual step by step guide and not the SAP training material. Please send to [email protected]
Thanks in advance
bye
habeeb

Hello Habeeb,
please use the - <a href="http://help.sap.com/bp_crmv250/CRM_DE/index.htm">SAP Best Practices for Customer Relationship Management - V2.50</a> (Internet Explorer required). In the area Installation -> Preconfigured Cenarios look for the Building Block C71: CRM Connectivity.
Regards
Gregor

Step by step guide on lsmw

Hello All,
I have to do a conversion using LSMW using batch input recording.
Could anyone please provide a step by step guide on LSMW.
Regards
Indrajit

Hi Indrajit,
Please find the Step by Step process.
Step-by-Step Guide for using BAPI in LSMW
The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed:
Please Go through these Links ,
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
lsmw-idoc method:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Reward Points if Useful
Regards
Gokul

Any step-by-step guide for implementing intermediate event?

Hi All,
I am trying to implement intermediate event in my BPM and so far I have created:
1) An intermediate event
2) WSDL file
3) A message trigger
But I am not getting how to proceed further. In the following document I found that a context DO needs to be used: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0369539-e876-2d10-ef93-8f30e112ee6d?quicklink=index&overridelayout=true
But I am not sure which context it is referring to?
Is there any step-by-step guide to implement this? or any wiki link?
Ameya

Hi Ameya,
Follow below steps:
1. Create WSDL file
2. Create an intermediate event in process modeling screen
3. Click on Intermediate event> Properties>Event Trigger
4. TRIGGER Drop Down> New
5. Give Name to your Message Trigger>Next
6. SERVICE dropdown>Select the WSDL created> Finish.
And I suppose they have mentioned Data Object for using it in coorelation condition.
Correlation condition is a boolean test which should be True(default) for the ntermediate message to be triggered.
As there will be mutliple process instances, when PI (in your case) trigger the intermediate event (consume WS) we can give a correlation conditon to check whether it is for the right process instance.
In you case you can store the Request ID in BPM DO, and also request it from PI while consuming WS and validate it in correlation condition.
Regards,
Unni
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 12:51 PM
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 1:00 PM

Step by step guide to config Reports Services 902

Is there a step by step guide to configuring Reports Services in 9ias 902?
I have installed 9iAS 902 Enterprise Edition on Win2k and wish to test Reports 9i output as a JSP.
Can someone provide any pointers?
Regards,
John

John,
I used the Oracle manual "Oracle9IAS Report Services - Publishing Reports to the Web". It was pretty basic and helped me get the report services working just fine.
Deborah
p.s. It is part #A92102-01

Could you Please Send me the Step by Step guide for the BADI

Hi ABAPers,
Could you Please Send me the Step by Step guide for the BADI.It is very Urgent
Thanks & Regards,
Ashok.

Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction .
YOu can go through these links...
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
just refer to the link below. it will of great help to u.
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
(SAP link- ultimate material )
suppose your working for XK01 then for that the BADI being VENDOR_ADD_DATA then this implemetation procedure.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. VENDOR_ADD_DATAand press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_VENDOR_ADD_DATA
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. VENDOR_ADD_DATA) and double click on the method name
for example within VENDOR_ADD_DATA contract is a method
8. When changes have been made activate the implementation
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Reward if it helps..

Step-By-Step guides/links to implement Service Manager

Step-By-Step guides/links to implement Service Manager

Can you provide step by step instructions to build a model of my house?
i'm not being flippant or joking, the problem is really down to building a model of your IT Department in Service Manager. There is no step by step guide to model your businesses unique processes and procedures.
If you want to stand up an environment, so you can get familiar with the product and start modeling your environment, then you might want to start with some of the
Test Lab Guides, or contact a consulting company who can help you plan and architect your service book, delivery model and finally your SCSM environment. FULL DISCLOSURE: I am
such a consultant, so I might just be advising you to go buy my services.

ABAP webservice testing - step bye step guide

Similar Messages

Maybe you are looking for