About start-of-selection and end-of-selection

Hi all,
what is the functionality of start-of-selection and end-of-selection events in reports.

Here we go :
Start-of-selection is the event where you will code ur sql statements, this is the event which will be triggered automatically even for normal programs, not only for reports even if you dont specify this event in the program.
At Selection screen is the event to validate the input values given in the selection screen using initialization event.
First in the sequence AT SELECTION SCREEN event will be triggered and then START-OF-SELECTION.
END-OF-SELECTION, will fire only when you actually write it after the selection of the data is over. Usually between the START and END OF SELECTION you fetch the data and after the END OF SELECTION, you process the data and write that as output as display the same as ALV.
If helpful pl reward.
Cheers.

Similar Messages

Finding the value of the text starting from x1 and ending at x2

Dear All,
While reading a notepad's each line, I need to take the each lines value starting from say 15th position to 20th position. If i use it_notepad-text+14(5) and the text does not contains any data, it generates dump.
pl. guide. Is there any function module to get the value of the string with starting and ending position.
Regards,
Vidhya

I think the best is what G@urav suggested. Simple catching this exception will solve your issue
data: word type string.
loop at it_notepad.
   try.
       word = is_notepad-text+11(4). "get the required word
   catch cx_sy_range_out_of_bounds. "and catch the exception in case the word is too short
   endtry.
endloop.
This way you won't get dump and will be able to skip the line which don't have required number of chars.
Regards
Marcin

I can't facetime with anyone, it starts the call and ends it immediately on its own. Any suggestions on what I am doing wrong?

I can't facetime with anyone, it starts the call but ends it immediately on its own. Any suggestions on what I am doing wrong?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

How to define financial year to start in November and end in October

Hi,
I am trying to build a report with following columns
Resort, Month, YTD Rooms, LY YTD Rooms.
Filter on Year==2010
The above measures
YTD=Year to date rooms
LY YTD = Last Year Year To Date Rooms
The results would be
AF, Jan-10, 300, 350
AF, Feb-10, 200, 280
Now for this client the financial year, starts in November, therefore their year should be Nov-09 till Oct-10.
How can set the Year to be from november to October with a timestamp function?
Thanks and Regards
Giuliano

Here's an idea you might want to try in the Presentation Layer base solely on what you shared so far:
Assuming that the report will always be run in the "current year" as you have in your example, than this should work:
1) Put a dummy column in your report with this CASE statement:
CASE WHEN Table.Month ((LIKE 'JAN%' OR Table.Month LIKE 'FEB%' OR Table.Month LIKE 'MAR%' OR Table.Month LIKE 'APR%' OR Table.Month LIKE 'MAY%' OR Table.Month LIKE 'JUN%' OR Table.Month LIKE 'JUL%' OR Table.Month LIKE 'AUG%' OR Table.Month LIKE 'SEP%' OR Table.Month LIKE 'OCT%') AND (Table.Year = CURRENT_YEAR)) OR ((Table.Month LIKE 'NOV%' OR Table.Month LIKE 'Dec%') AND (Table.Year = CURRENT_YEAR - 1)) THEN 1 ELSE 0 END
Put a filter on this column and set it to 1.
2) Add another filter on CURRENT_YEAR and CURRENT_YEAR -1.
NOTE: In my example, CURRENT_YEAR is a repository variable you should have (name could be different, but it should be in number format).
The way this works is that the second filter filters your report overall on all data for "this year" and "last year." The first filter works with the data within this potential two-year period. Within this time frame, you want the data, for the months of Jan - Oct, where the year = current year and (which in logic, uses the logical operand "OR"), you want the data for the months of Nov - Dec when the year = current year minus 1. This filter will filter out Jan - Oct of "last year" and Nov - Dec of "this year," leaving you with the time period you are looking for.
Play with the syntax, cause I didn't build this one, but it should work.

Select Records between Begin Date/Time and End Date/Time

Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
      SELECT * FROM GLPCA
         WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).

Thank you all! I ended up using the following:
SELECT * FROM GLPCA
          WHERE RYEAR IN L_R_RYEAR
            AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
            AND ( ( CPUDT = ENDDATE   AND CPUTM <= ENDTIME )   OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record

Scanning an ascii string for a start and end character

I would like to watch data lines on a com port and pick off a part of a
line that starts with a "$" and ends with a CR. I would like the
felxibility to select different start and end characters also. Is this
doable with LabView? I have the com port monitoring done I need to
separate incoming strings. I can't count chacters because the data
lines varies in length each time the data line comes in. Thanks in
advance fir the help.
[email protected]

If you don't want to mess with having to decide whether or not you need to pre-pend a "\" to the character you are feeding into the match-pattern function then you could just do it all with byte arrays like in the attached example. The example also shows various ways that ASCII controls & indicators can be configured to allow you to more easily handle non-visible characters (just right-click on the front panel control/indicator and select normal, \ codes, hex or password).
As far as your question about the error code meaning, you can right-click on a front-panel error cluster and select the "explain error" option to see all the known causes of the error. You have to then interpret this in the context of what you were doing. When I drop an error cluster on a front panel, set status to Error and code to 85, I can right click on it, select "explain error" and get this:
"Error 85 occurred at an unidentified location
Possible reason(s):
LabVIEW: Scan failed."
...and that sounds to me like (as a WAG) you might be trying to use the Scan From String function with input data that does not match the format string.
Attachments:
String Subset.vi ‏53 KB

How can i get 2nd week starting date and ending date in a month?

please help me to query this.
thanks in advance

Hi,
I assume the second week start the next monday after the 1st of the current month. End of week is the next sunday.
If a week start monday, the second week of december start the 5th and ending the 11th :
1 select 8-to_char(to_date('01'||to_char(sysdate,'MMYYYY'),'DDMMYYYY'),'D')+1 first_day2w,
2         15-to_char(to_date('01'||to_char(sysdate,'MMYYYY'),'DDMMYYYY'),'D') last_day2w
3* from dual
SQL> /
FIRST_DAY2W LAST_DAY2W
          5         11If we take august, the second week start the 8th to end the 14th
1 select 8-to_char(to_date('01082005','DDMMYYYY'),'D')+1 first_day2w,
2         15-to_char(to_date('01082005','DDMMYYYY'),'D') last_day2w
3* from dual
SQL> /
FIRST_DAY2W LAST_DAY2W
          8         14HTH,
Nicolas.
Note that my nls_territory = FRANCE.
if you're in America, first day of week is sunday, and last is saturday :
1* alter session set NLS_TERRITORY='AMERICA'
SQL> /
Session altered.
SQL> ed
Wrote file afiedt.buf
1 select 8-to_char(to_date('01'||to_char(sysdate,'MMYYYY'),'DDMMYYYY'),'D')+1 first_day2w,
2         15-to_char(to_date('01'||to_char(sysdate,'MMYYYY'),'DDMMYYYY'),'D') last_day2w
3* from dual
SQL> /
FIRST_DAY2W LAST_DAY2W
          4         10
SQL> Message was edited by:
N. Gasparotto

Find Conflicts between start and end time

I have a table appointment (appointment_id, start, end , Location) will hundreds of records like below
appointment_id      start
end                                      Location
1                  2015-04-29 10:00:00.000        2015-04-29 12:00:00.000
   ABC
2                  2015-03-29 09:00:00.000         2015-03-29 13:00:00.000
XYZ
3                 2015-03-29 10:00:00.000         2015-03-29 11:00:00.000
XYZ
if you see appointment id 2 and 3 they are conflicting with same location
appointment id2 starts at 9 am and ends at 1pm ,
but appointment id3 also reserved same day & same location start at 10am and ends at 11 am ..
this should not be possible ....
can you help in finding how many such conflicts are there in the appointment table ?
i will have to find a report...
Thanks

Hi coolguy123SQL,
Regarding your description, does the appointments happened in the same prefixed locations with a time span overlap mean a conflict? If my understanding is correct, you may reference the below code.
DECLARE @myTable TABLE (appointment_id INT, startDateTime DATETIME, endDateTime DATETIME, location VARCHAR(10))
INSERT INTO @myTable
SELECT 1, '2015-04-29 10:00:00.000', '2015-04-29 12:00:00.000', 'ABC' UNION ALL
SELECT 2, '2015-03-29 09:00:00.000', '2015-03-29 09:30:00.000', 'XYZ-123' UNION ALL
SELECT 3, '2015-03-29 10:00:00.000', '2015-03-29 11:00:00.000', 'XYZ-456' UNION ALL
SELECT 4, '2015-03-29 11:00:00.000', '2015-03-29 13:00:00.000', 'XYZ-789'
;WITH CTE AS
SELECT appointment_id,startDateTime,endDateTime,location,
CASE WHEN CHARINDEX('-',location)=0 THEN location ELSE SUBSTRING(location,1,CHARINDEX('-',location)-1) END AS locationID FROM @myTable
CTE2 AS
SELECT *, ROW_NUMBER() OVER(PARTITION BY locationID ORDER BY startDateTime) AS seq FROM CTE
SELECT
c.appointment_id conflict_appmt_id1,c.startDateTime startDateTime1,c.endDateTime endDateTime1,c.location location1,
t.appointment_id conflict_appmt_id2,t.startDateTime startDateTime2,t.endDateTime endDateTime2,t.location location2
FROM CTE2 c JOIN CTE2 t ON c.locationID=t.locationID and c.endDateTime>=t.startDateTime AND c.seq<t.seq
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

DVR starts and ends early and late

When viewing my recorded shows on the DVR most all start about a minute early and end about a minute before showends. Please tell me this can be corrected...

The DVR is programmed to start one minute EARLY and stop two minutes after the scheduled time. This is called 'soft padding'. As far as the ending early, the networks will run a popular show late so that people ‘hang around’ and miss the start of other programs. This is called "bridging".
Early starts are how the DVR works. If you are concerned with missing the end of a show because of this bridging, you could add the time at the end under "record options".

Title in motion starts fast and ends slow... need to make it consistent across the motion. Deadline is very soon! help!

I made a title, and used the motion tool (position and scale) in effect controls to move it across the screen, while making it bigger. When I see the motion at hand, it starts very fast and ends very slowly... how do I edit the speed of that motion? working with Mac BTW. HELP

Control it with Key Frames.
If you have applied no KFs it should be linear (constant) already.

39L4363D - Unable to set padding time for recording start and end time

Hello,
I have a problem with my 39L4363DG tv (Software 7.1.90.34.01.1).
I'm not able the set padding time for recording start and/or end time as described in the [manual|http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. Both menu item "start padding time" and "end padding time" are disabled?
Can anyone help me and give me an advice on how to solve it?

Hi
The padding time can be set for programmed recording.
There is also an scheduling priority
If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.
When +Start Padding Time+ and +End Padding Time+ are set, the start time and end time will be the time plus the additional minutes.
If scheduling times overlap, priority will be given to the programmed recording which starts first.
When the programmed recording that started first ends, recording will switch to the next scheduled programme.
At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded.

How to make start and end curve pieces of selected tab transparent in custom theme in FF33?

I created my own theme using a background image but it seems I cannot code it right in browser.css to make the start and end curve pieces of selected tab transparent. They remain colored, I guess using the operating system's (which is Win XP) dialog color. The middle piece is fine, though, as well as the hovering.
I built my theme based on https://developer.mozilla.org/en-US/docs/Building_a_Theme but customised it.
Your answer would be highly appreciated!
Best regards,
Chaperon

There is a Theme Development forum over here - http://forums.mozillazine.org/viewforum.php?f=18&sid=8c2f1ca97805f897689772e80e351023
You'll need to register and login to that website, which isn't part of Mozilla Support, but far more theme developers hang out over there then what we get here.

"Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated.

I have one big wav file of segued tracks as a mixdown and inserted CD markers where I want marked tracks. "Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated. Why can't I export these marked portions as separate files?

the markers durations need to be configured, there is an easy way to do this using your existing markers. click the start time of marker 2, this should change to edit mode to type in a new number, just copy the numbers cmd/ctrl+c. then click the end time of marker 1 and paste, cmd/ctrl+v. now repeat for the rest of the markers, and on the last one enter a value for the end time or click and drag on the duration to manually extend it. once all the markers have a duration, the button should be active to export.

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

HT5361 I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

Thank you Carolyn, How helpless you can feel without this App!
Going into the App Store as you suggest, I see 'thee updates available", the first says, 'X RESTART', the second says, 'Garage Band, an error has occurred" (in red), and the third 'Memory Clean, UPDATE'.
Am I correct in thinking that OSX is the problem, because it is waiting for a restart?
Kind regards,
Cy

About start-of-selection and end-of-selection

Similar Messages

Maybe you are looking for