ABOUT THE HR-ABAP

Hi,
i hope every body is doing good. Here i am having the query on payroll.
Here i want to retrive the payroll result for india, in the payroll data i want know the wage types which are belogs to infotypes 0008,0014 and 0015.
a immediate reply will be appriciated.
thanks
Ravikiran

You can find those in table view V_512W_D.
1. Goto Transaction Code SM30.
2. Table/View: V_512W_D
3. Click display.
4. Country: 40
5. Click Enter twice then you can see all the wage types.
Is that helps?

Similar Messages

Query About the SAP ABAP Module

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

Hello My name is Anuj Chaturvedi. I have doing a MCA Course(VITH semester). I want to do a SAP ABAP Module. So Please suggest me that ii is gud for me? Also tell me something more about the ABAP Module. Kindly reply me soon.
Thanks
Anuj Chaturvedi

[newbie] about the ABAP trial

Hi all,
I have some little questions about ABAP trial that must sound like newbie questions ( that's why I tagged the title like that).
I would like to know if the trial contain all I need to train in ABAP devlopment such as workbench, sm30, Data Dictionnay, and tools needed to be efficient as an abap technical consultant ?
My second question is about the time limit of the licence ?
IS there a restriction or can I use it as lon as I wish ?
The goal for me is to learn technical points to improve my skills and I have no opprotunities to do it daily in my work.
Thanks a lot for help,
Regards
Morgan

Hi Morgan. Yes, the NetWeaver Sneak Preview system includes everything that you need to learn ABAP, it includes everything on the technology layer, so you will be good to go. The license is good for 90 days, but it can be renewed indefinitly every 90 days, so a couple days before your 90 days is up, simply go get another licence and apply it.
Regards,
RIch Heilman

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

I need information about Web dynpro ABAP Exception : ICF Service Node

I need information about Web dynpro ABAP Exception :
ICF Service Node "/sap/bc/webdynpro/sap/abcd/undefined" does not exist.
Here abcd is application name.
ICF Service Node exists and activated but kindly let me know from where "undefined" is coming .
Please let me know your comments /views about this.

Hi,
I think ur webdynpro service is not active after upgradation.
You have manually activate it.
Go go Tcode SICF,Execute the Initial screen,
and in this new screen give service as your application name and click on filter.
You will get your service below which will be ur application name .
right-Click on the deactivate and activate it or just activate it,.
This shd work

Explain about the Models...

Hi friends...
Can anybody explain about the models in webdynpro, and also explain about its types as well as its functions....
Thanks in advance...
GS

Hi SatishKumar,
As WD is based on the MVC paradigm models represents the backend of the this
architecture.
Now the Models can be categorized in 2 ways:
1. Adaptive and Deprecated.
2. RFC,Webservice,Bean.
Now the Adaptive models follow CMI(Common model Interface) specs.
For information on the CMI look into the documents on the SAP Netweaver Documention.
Also,the following document would give you a good idea of the same.
<a href="http://help.sap.com/javadocs/NW04S/current/cm/index.html">CMI documentation</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cef4f43e-0d01-0010-db84-ede25c874115">How to use CMI</a>.
This will give you sufficient information to start with the CMI.
Now for the other classification which's pretty straight:
1.WebService Model: Is like any other webservice uses SOAP request response.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e">Adaptive Web Service Model</a>
2.RFC: Is a function module made in ABAP uses JCO for interacting internally.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de">Adaptive RFC Models</a>
3.Bean Model: Java Bean Classed should follow the Java Bean specification.
<a href="/people/anilkumar.vippagunta2/blog/2005/09/02/java-bean-model-importer-in-web-dynpro Bean Model Importer in Web Dynpro</a>
Regards
Amit

About PAYROLL in ABAP-HR

Can anyone share some information about PAYROLL in ABAP-HR in specefic U.K

Can be helpful for the Report generation like salary register and reconcile of payroll for certain periods by accessing tables, RT, CRT& LRT.
all the best

Info about the RFC

Hi,
I have to work on RFC FM. Can any body give me the info about the RFC? especially for Function module?
Will give Reward points
regards,Ram

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
Function Modules doc
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Reward points for useful Answers
Regards
Anji

Question about the ECC6 migration and the retrieving of partner's address

Hi experts,
I have already post a thread about the use of the table BUT021_FS instead of BUT020 for retrieving partner's standard address.
I do modifications to my specific programs.
But what about the standard?like BUA_BUT020_SELECT_WITH_PARTNER for example
If I read the standard code, I see that it is still using the indicator XDFADR to specify if this address is standard or not.
I am new at ABAP and I want to know your analyse about it.
So, my question is : Is the result of this FM (partner address) correct? what I mean to say if I will use this address to determine if it is a standard or not.
Best regards.

Hi,
I understood what you mean but I don't use this FM explicitly.
I am analyzing a CRM 7 dump and I see in the traces of st22 the use of this FM.
The dump appears when I create new Organization and Contact in CRM WebUI. May be it's a validation of fields of address.But I think, I must put this other thread in CRM, but I you had some experience with it, it would be very helpful.
Thank you for your help,
Best regards.

Authorization about Web Dynpro ABAP

Dear all:
I have some problem withs the authorization about the web dynpro for abap.Please give me some advices.
For example: In my web dynpro abap,i have two tabs,one is "upload",anthor is "preview".Now there are two users,
in this example ,i assume user A and user B.If user A have the authorization of "Upload",and the user B have "Preview".
Now how can i solve the problem ? If i do not want to use the code to implement it , is there any solution for it ? Thank you ~
Best wishes !

Hi,
There are many ways to achieve this, but without code changes I guess this would be the easiest route:
Create 2 application configurations: one with Upload button Hidden and other with Preview Button Hidden.
Now to run you application you have 2 URL's by vritue of 2 application configurations.
Give the appropriate URL to required set of people.
Learn more about [App Configuration Here|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/af5e19e7-0b01-0010-37af-bc816f9a240c]
Hope this helps.
Regards
Manas Dua

A word to the wise about the PBO of a docked tree

I was just having an interesting discussion with Rich H and Max B over in ABAP Objects about "re-entrant" docked trees. ("Re-entrant" in this case means you may have to rebuild the same tree control from a different root during the same execution of the program - this is not exactly what "re-entrant" used to mean to a CICS COBOL programmer, but it's close.)
Anyway, suppose you pop a large ABAP OO tree the correct way - with just the root and its immediate children in the node table. (Then as the user clicks on an expandable folder, you find its children and insert them, etc.)
Then you have to be very very careful if the tree is docked on a screen with its own PBO, because the PBO will actually fire each time you click on a folder to expand it.
Why do you have to be careful?
Well, suppose you're in the situation I was telling Rich and Max about - where the user can back out of the tree screen and come back into it with a different "root" selection.
Then you have to distinguish between two different cases in which the PBO will fire - the case where you want to pop a brand-new tree and the case where you want to continue pop new levels of an existing tree.
As I said, it never occurred to me that the screen PBO would have to fire each time the user did nothing else except expand a folder in a tree on the screen.
So I thought this might not occur to others as well, and that's why I'm mentioning it while we're sitting here having coffee.

I never had any issues getting my ATI card to work under linux. The new ATI drivers are much improved over the previous version. Yes, I had to recompile the kernel so that AGPGART was a module but that isn't such big of a deal. I first installed the ATI drivers under Slack w/o any sort of package management using rpm2tgz.
The one thing that bugs most people about the ATI linux drivers isn't that the module is difficult to install but that the performance isn't up to par with their windows offerings. nVidia drivers are very close on both platforms. If I had a newer ATI card I'd probably stick with it before putting up more money to get an nVidia card (get an older GeForce 4 Ti or GeForce 6) right now. But, I'll probably always buy nVidia for future graphics cards. When I build my AMD64 box down the road it will be powered by nVidia graphics unless ATI improves by vast amounts in the driver department. FYI, I'm using an nVidia GeForce FX 5700 my current Athlon XP box and it isn't even close to being the card my old Radeon 8500 is for Windows, but under linux it's much better.

Sending cache notifications to the backend ABAP

Hi,
1. How the cache notifications are sent to the backend ABAP?
2. What is the role of INTEGRATION_DIRECTORY_HMI ( /dir/CacheRefresh )?
3. If I need to require cache notifications to be sent from PI (ABAP 7.1) to ECC (ABAP 7.0), do i need to have INTEGRATION_DIRECTORY_HMI in ECC?
Thanks and regards,
Sreehari

Hi Abhishek,
Just want to be clear about one thing. If INTEGRATION_DIRECTORY_HMI stores the cache updates, and I need to send these updates to ECC ( which is on a seperate AS ), ideally I should be having the RFC destination in ECC as well.
My understanding was if the RFC destination exist in PI, it will send cache notifications to the ABAP of PI. If we need to send cache notifications to some other ABAP system in the landscape, we need to have the RFC destination there as well. Please correct me if I am wrong.
Many Thanks and regards,
Sreehari

Steps to install the Netweaver ABAP Trial version.

Hi all,
Am having the copy of Netweaver ABAP Trial version which is downloaded 6 months back. I tried to install it, the installation is getting failed.
Can you get me the clear steps to install the Netweaver ABAP Trial version.
Am having 2003 Server OS.
Regards,
Dinesh.

Read:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
Once the contents are extracted, initiate installation by clicking on start.bat to start the installation overview page. The download package contains a detailed installation guide and information about the evaluation developer license
So what is unclear in that documentation?
Markus

I want to complete information about Payrolls in abap hr?

i want to complete information about Payrolls in abap hr?

Hi,
SAP HR Payroll Overview
In a broad sense, payroll accounting is the calculation of remuneration for work performed by an employee. More specifically, payroll accounting consists of a variety of processes that are becoming increasingly important due to the employers increased obligation to supply benefits and medical welfare.
These benefits are products of:
Labor law
Tax law
Contribution law
Benefits law
Civil law
Reporting law
Information law
Statistics law
The remuneration is calculated in the following steps:
1. Calculation of gross remuneration
2. Calculation of net remuneration
Gross and net pay comprises the individual payments and deductions which are calculated during a payroll accounting period, and are received by an employee. These payments and deductions are included in the calculation of pay by uniquely distinguishable wage types.
Payroll is predefined in the SAP HR system for many countries specifically (e.g. Payroll United States, Payroll Spain, Payroll Japan) and all other countries' payroll comes under the heading of "International Payroll".
Or Check these links....
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/38a63a04227748e10000000a11402f/frameset.htm
http://web.mit.edu/hr/compensation/quickcards/ASR-Change-Save-Layout.pdf (Very useful...)
http://www.sap.com/belux/solutions/business-suite/erp/hcm/pdf/SAP_BE_Payroll.pdf (Very useful...)
http://www.sap-basis-abap.com/saphr005.htm
Reward points if useful....
Regards
AK

ABOUT THE HR-ABAP

Similar Messages

Maybe you are looking for