About the report print
Dear Friends:
I want the change the report from vertical print to horizontal print. How should I do for that? Pls kindly help, thanks...
Any body help???????
Similar Messages
-
Any one can help me for the report printing in Report 10g
when the report is printed internet explorer i want database updateing how ?
i asume you are using (Web)Reports 9i or higher.
you could implement something like
-- start report
--check report progress
LOOP
l_report_status:= report_object_status(l_job_id);
exit when (l_report_status not in('ENQUEUED', 'OPENING_REPORT', 'RUNNING'));
END LOOP;
-- report ended (with/without errors)
IF (l_report_status='FINISHED')
THEN
-- Report run was successful: update database
ELSE
-- Report generation errors
END IF;to check if the report finished succesfully.
succes -
Help me about the Report Category !!
In a ABAP report program's "Attributes", we can set the Logical database (eg. in HR, it's PNP) , and then, we can select the "HR report category", for the report screen category setting. After we set the Master Data(infotypes), we will get the report with several pushbuttons in the first line, like Further Selections "Sort order" ...
So, my question is if I want to add some items into the "Sort Order" selection screen, how to do that ?
Thanks a lot
TomHi Tom,
You can create the report category from SE38-> Attributes and then give the LDB name as PNP.
Now click on the HR report category button and proceed creating the new report category by clicking the create button.
The report category name should start with 0* or 7*.
Hope this helps you,
Regards,
Subbu. -
[Urgent]About the report of Business Content 3.1
Hi, everyone here,
I'm a new fish in BW as well as Business Content. But I'm asked to show one or two reports of BW (SD area) to my boss in this week and the data will be extracted from our R/3 system. So , I think Business Content is the fastest way for me to finish my task.
The situation is :
I have installed BW 3.10 with Business Content 3.1 by myself.
The software components are :
SAP_BASIS (Release)620 (Level)0011
SAP_ABA (Release)620 (Level)0011
SAP_BW (Release)620 (Level)0010 (I'm now updating it, the highest level is level 27)
PI_BASIS (Release)2002_1_620 (Level)0005
BI_CONT (Release)310 (Level)0000
(BTW, the updating process drives mad.... so much patches, why SAP doesn't provide us with Service Pack like microsoft.....)
I have defined a source system (R/3) and created the RFC users for both SS and BW.
Then can anybody tell me a fastest way to build up / show a report for SD via Business Content?
Thanks you in advacne. It's an urgent case , I really need your help.Hi,
Check these links on BW-SD:
https://websmp104.sap-ag.de/~sapidb/011000358700002719062002E/EXTRSDTRANSDATA_new1.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/09/a7b339688d2453e10000000a114084/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/09/a7b339688d2453e10000000a114084/frameset.htm
Bye
Dinesh -
1 Report takes input as range of materials and shows subtotal of the stock for each storage location and grand total of the stock at the end of each plant .
2.Goods movement report for production orders:reort dispalys doods movement by the specified production order and can view material document clicking on document number or by double click on the desired line...
3.report that didsplay the materials that go out-of-stock only finished goods .
4.drill down report for materials details for totals and subtotals for material stock values by material group and material type ..
depending upon the time frame available.. u can specify the tables and fields that are needed for the 4 kinds of reports....
or please give me the code .. of the above 4 .. if u know ... or atleast give meteh IDEA for the purpose my email id is [email protected]
thanks in advance ...Hi,
1.for the ist one you have to use MARA and MARD tables.
get matnr from mara table, werks(plants),lgort(storage location)& stock(take appropiate field) from MARD table
define matnr as select-option.
first get matnr from mara as per selection-criteria,then use for all entries to get other data from mard table.
after getting the data move all the data into fiinal int. table,sort the table and use control breaks statements for doing sum as required.
4. get matnr,mtart,matkl from mara table and stock from mard table.
get the data as above,move to final int. table,sort it and use control breaks to group and sum the required data.
Firrst start doing,if u get any problems post it.
regards, -
About The Finger print device Problem
I have a pavilion m6 notebook,a days ago i installed windows 8.1 on it.Now the fingerprint is not working
(It worked perfectly on windows 7)
When i touch the scanner this error comes..
please tell me it anyone know how to solve my problem!Hi Indula,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion m6 Notebook and having an issue with the Fingerprint reader. Here is a link to download and install the Fingerprint Sensor Software.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Please help about Report Printer and PS tables-objects . ..
Hi everybody
I'm in trouble. I have a requirement in PS módule related with reports created by the Report Printer tool. I don't have any idea about these topics.
My requirement is to create a report (not with Report Printer) with the structure for projects, with all the structure Project-WBS-Network-Activity and with some values like Budget, Commit, Actual, Paid, etc.
The functional consultant only tells me about some reports created with Report Printer wich have the columns required, some report has the Budget, other one has the Commit, etc. For example, one report is the tcode S_ALR_87013532; i don't know if this transaction exists in all the SAP implementations or if it was created only for my company.
These reports only show two levels (Project-Network) so i i have to investigate:
1. How to get all the structure levels (project-WBS-network-activity)
2. How to 'translate' in code some value showed in a report created with Report Printer, i guess these values are created with formules and objects.
3. How to get the same values showed in these reports, but for the Networks and Activities.
I do not know anything about PS module and Report Printer and i really don't have any idea about how to make my development.
4. I think the functional consultant could be able to create the report himself with the Report Printer, but he tells me he does not manage this tool so good and he wants to send SAP mails with the reports, and he say the reports created with Report Printer can not send mails. Is this true ? and then, would be easier for me to learn Report Printer and create the report myself instead to develop it ?
Does somebody can help me ? Any idea ?
Please help !! I don't know even how to start with this.
Thanks in advance ..
FrankHi Frank,
here're some links:
-http://help.sap.com/saphelp_47x200/helpdata/en/ca/01993862b47c67e10000009b38f8cf/frameset.htm
-http://www.sapgenie.com/abap/tables_ps.htm
-Re: Project System Costs: budget/actual/commt/rem.plan/assd
Andreas -
Can't print the report directly on the printer?
Dear All,
My client encounter a problem of printing a report directly to the printer. He is using developer 6i with OAS. His application is going to deploy on the web. He wants the report printed out directly on the "HP Laser Jet Printer" after the user has made the selection and clicked the "Print" button from the forms 6i. However, he got the error saying that
"Oracle Report Server OWS Cartridge - Report Job has terminated with error
Report Server Replies:
Rep-0713: invalid printer name 'HP4050' specified by parameters DESNAME."
And here is the parameter string passing into the report server:
http://epmsdevs2.eway:9002/rwows/rwows60?report=epms1271.rdf+userid=epmsdev/epmsdev@dev+desformat=landscape+destype=printer+desname=HP4050+server=RepServer
Is there anyone can show me some light on it?!
Any help and idea is appreciated in advance!!!
sheetaHi!
If reports are run in web env. then
you can print reports directly on
printer defined on m/c where report server
is running, not on client m/c. If you want
to print on client m/c then define that
printer on report sever m/c and make sure
report server can access that printer.
Nirali -
I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !
This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space. -
Hi all,
I'm not sure what's causing this error.
With a regular report (not Interactive) region, I have enabled the report printing. All file types open/save correctly except for Excel.
When opening the file, Microsoft Excel actually pops up this error:
File cannot be opened because:
The server did not understand the request, or the request was invalid.
Error processing resource 'http://www.w3.org/TR/xhmtl1/DTD/xhtml1-strict.dtd'.
Line 3, Position 57.
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">If I save the file and try to open it, Excel pops up this error:
This XML file cannot be opened because of an error. Check to make sure the file is a valid XML file, and that the XML syntax is correct.
You can also try re-creating the file and closing other applications before you attempt to open it again.Excel version is Excel 2002 SP3 (v10.x).
Some additional info that might be helpful:
When Excel is opening, the status bar shows it is "Opening HTML.XLA", the shows "Opening {filename}.xls" but fails halfway through that.
Any ideas?
ChrisHi Chris,
This is the output I get when I click on the Print link
<?xml version="1.0" encoding="UTF-8"?>
<DOCUMENT>
<DATE>04-AUG-08</DATE>
<USER_NAME>nobody</USER_NAME>
<APP_ID>17977</APP_ID>
<APP_NAME>Test Export</APP_NAME>
<PAGE_ID>1</PAGE_ID>
<TITLE>Page 1</TITLE>
<P1_ROWS></P1_ROWS>
<P1_GO></P1_GO>
<P1_REPORT_SEARCH></P1_REPORT_SEARCH>
<REGION ID="4149756408582108901">
<ROWSET>
<ROW>
<COL1>value1</COL1>
<COL2>value2</COL2>
<COL3>value3</COL3>
</ROW>
<ROW>
<COL1>value12</COL1>
<COL2>value22</COL2>
<COL3>value32</COL3>
</ROW>
</ROWSET>
</REGION>
</DOCUMENT>Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/ -
How to create a virtual directory for the Report Server
Hi, I am new to server admin and need help with configuration.
I would like to map a physical directory on the server so that users can use a virtual path to save report outputs in that location. For example the form will call the report with desname = 'd:\xyz\abc.pdf' and the output file will be saved in a predefined directory on the server. I know how to do it on the forms server using the orion_web.xml but not sure about the report server configuration.
We are using rwservlet to run reports on 10G release2/Windows 2000.
Thanks in advance,Virtual directories are mapped in the httpd.conf file in the Apache directory as aliases:
Alias /xyz/ "d:\xyz\"
You can now call the report output with
http://server/xyz/abc.pdf -
Report printing failed with "Servlet error: An exception occurred. "
Hi,
I use Apex 3.1 in Oracle Express edition develop few applications. In one of the application, when I enable report printing in stardard reports and try to print to PDF/Excel, the servlet error occur.
I had configured FOP in my server and I can download PDF in "interative report", but for stardard report, the report printing failed.
I can successfully print the reports in my others applications. Anyone know what could be the reason which cause an application failed to print the report.
Thanks
VincentDoes your application name have special characters? I heard that the app name has to be just letters and numbers for this to work...actually testing right now.
-
Report : How to show all the reports in Content Management
Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
DeepDeep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated. -
I am working with reports of 2.5 version and i got a requirement for adding an option to save the report in pdf format. Can anybody please help me on this asap
Thanks & RegardsAre u sure about the report version.
Please do upgrade while even in oracle they almost stopped for new version -Developer suite -
Crystal Report Printing - A4 Issue
Hello Experts,
One of our customers use third party rental add-on with SAP B1. The add-on has cyrstal reports files. All these reports are set to letter size by default in report page setup. Client does not to print in A4 .
When the user clicks on Print Preview / Print Icon on rental order the , the report loads, but when sent to Printer for printing it becomes A4 (It should be letter).
The rental reports works fine on the SAP Server, meaning when sent to printer it goes as Letter size which is what we want but this does not happen at Client's machine's.
Also , i have an add-on running on my local machine and the reports prints in letter size with out any issue. I have been searching online regarding this issue but i haven't found any solution.
Can any one advise me on this issue. Is there any setting that i can do in crystal or printer ?Is the default page size for the client's printer set at Letter or A4?
Maybe you are looking for
-
When I click on any link in a Thunderbird email message I get the error message: Firefox.exe – Entry Point Not found The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPp
-
ICloud doesn't like my email address? HELP!!!
I have an apple ID based on my email address, which happens to have a '-' in the domain name. I set up an icloud account using a different email address at the same domain. On the iPhone, I can't seem to set up a different apple ID for the cloud shar
-
Key Figure displays as rounded in BEx
Hello, I have a report that is based off of InfoProvider/Object: 0MATERIAL. When I run the report, the key figures are displayed as rounded values, for example 15.000 LB, 0.000 LB, 2.000 FT3. I would like to get 3 decimal places for example 15.255 L
-
My ipod touch is disabled and it says to connect to itunes to restore. I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device. I then put it in recovery mode and connected it to itu
-
i recently had my computer fixed as it was loaded with viruses. Also I finally got my IPad 1 back from someone who had "borrowed" it for a year. It no longer worked, but in the case i had written down my old apple id. i had purchased 3 other ipad's s