Abt BOM. in contract sales order & in bill

Our client have one reqiuirement.
They are in to contract with customer for a year then they recieve PO. As per that PO they put sales order in frerence to contract(qty). In qty con. we have BOM.
N\Nw they wnt to copy n chage the sequence of the items with qty which are there in the BOM. Is it possible. waiting for ur positive reply.
regards
nitin

Dear Nitin,
1) You can only add sub-item to the BOM or remove from the existing, but you can't insert in between the sub-item once you exploded the BOM in Sales Order.
2) After alteration of it you will loose the functionality of Delivery Group, which is a key benefit of BOM configuration.
Please correct me if wrong.
Regards,
Yuvaraj.

Similar Messages

FM for Updating Installation date in Contracts + sales orders Item level

Hi
Plesae give any FM for Updating Installation date in Contracts + sales orders Item level for contracts tab.
Thanks and Regards,
Vishnuvardhan....

Have used the billing transaction to set a Default Billing date at time of blling.

BOM Production in Sale Order

Hi all,
I have a finished good is ABC, strategy is 20 (make to order).
I have a variant for ABC, the quantity of components in ABC is 1 pc. When I create a Sale order, I have to choose some characterristics. It depend on requirement of customer. I can see cost estimate in cost report function of Sale Order and inform to customer. My question is "if I change the quantiy of component in ABC is 2 or 3 pc, the cost estimate will be change?"
If not? how i see the cost of order after change component in BOM.
Thanks all

Dear,
I have noy fully understood your question. What I understood is you have created Sales order and then you chnaged the BOM qty of sales order BOM. Will it chnage the cost estimation?
It depends. If you have chnaged the BOM after sales order is created, if you go for recost run, it may change. and you may get the correct cost.
Are you looking for this?
Raj

Error while creating the sales order with billing reference

hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Difference amount in sales order and billing document (For one line item)

Hi Experts,
User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check in sales order condition I found that VPRS condition is used and the value is 692.13and the amount is 3245.26in sales order. But if suppose I check the same value in billing doc the value is 0.69 and the amount is 3245.28. Can u suggest me which configuration I have to check for this.
I also checked change lock but there is no change in sales and billing document & Material
Regards
Sunina agarwal

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

BOM explosion in sales order

Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
Emily

Hi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla

Cost in Sales Order and Billing not match

Dear all,
I am facing a problem that the cost in Sales Order and Billing (order-related billing) not match.
The error seems related to sales order is getting moving price (MBEW-VERPR) as cost but billing is calculated by issued amount / qty.
Here's the detail (refer to the screen captures).
Sales qty = 1330 PC.
Local currency = HKD, sales doc currency = RMB, exchange rate = 1.26215.
Condition type ZCSR, condition category = G (Internal price).
When creating sales order ,
Cost is take from MBEW-VERPR => 1.86 HKD
Cost converted to doc currency => 1.473 RMB => 1.47 RMB
Total amount = 1,330 x 1.47 = 1,955.10 RMB
When creating billing from the delivery note,
Cost seems taking from total value divided by total stock in the article doc.
Cost = 2,477.82 / 1,330 = 1.863022556390 HKD => 1.476 RMB => 1.48 RMB.
Total amount = 1330 x [(2,477.82 / 1,330) / 1.26215] = 1,963.17 RMB
My goal is to align the same cost and amount in sales order and billing.
Please help.
Thank you very much.

Dear joan,
Thank you very much for your advise.
I implemented example 1 as in note 24832, trying to disable price re-determination in billing.
However it doesn't work.
Added code in example 1:
Copy control Delivery type LF to invoice F2, pricing type changed to X:
Still ZCSR re-determined but not copying from sales order (1.47 RMB):

Sales order quantity billed instead of delivered quantities?

Hello. I am having an issue with billing delivered quantities. This is the scenario:
3rd party, non stock materials, are assigned to a network activity in cj20n. These items generate a PR which is then converted to a PO and goods receipt is posted to the network activity. A sales order is created and assigned to this wbs. Delivery from project is then carried out in CNS0 and picking and goods issue is posted in vl02n. If full quantity received to project is not issued out in vl02n, upon billing in vf01, the total sales order quantity is billed. How do I alter my configuration such that only delivered quantities are billed?

Hi
Its seems that your sales order quantity billing issue has been solved.If it is solved then kindly share with us,how the problem has been solved.As there prices are not picking in the billing document, so please check the pricing type that has been maintained in the VTFL copy control.Secondly also check in VOV7 wheather item category is relevant for pricing has been maintained or not.
You get the delivery document to determine prices from sales order to delivery through copy controls.
NOTE:If the issue(Sales order quantity billed instead of delivered quantities) has been solved then kindly close the thread and post your issue through new thread
Regards
Srinath

Report showing Contract, sales order and invoices created

Hii All,
Is there any standard report showing the sales contract, sales orders created with reference to contract and the invoices with some relevant details such as customer, material, invoice value etc.
If i go to VF05 and then select the a line and see the document flow, i get the contract number, sales order number.

Hi,
You need to create a report of this requirement only through development.
Rgds,
Sivarajesh. J

User exit to copy the data from sales order to billing document

hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudh

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

Copy Pricing Conditions from Sales Order to Billing

Hi,
Is there anyway to copy pricing conditions for item level from Sales Order to Billing Document at the time of creation of Billing Document.
Thanks

This question is not on topic for the Web Dynpro ABAP forum and has been locked.

Standard COGS cannot be Transferred from Sales Order to Billing Document

I did a test in current client with the following steps:
Create Sales Order for Configurable Material -> Execute Sales Order Costing Run, marked and Saved the result via CK51 -> Create Prodcution Order for such Sales Order -> Confirm Prod Order -> Conduct GR per the Prod Order -> Conduct Goods Delivery for the Sales Order-> Create Billing.
(There is not any costing value during the whole process)
There are many Value Fields in the CO-PA document regarding to this billing, the value of standard COGS items(including Material Cost, Period Machine, Variable Labor etc) are also included and their value are expected to be transferred from Sales Order. However, in my testing, those COGS value failed to be transferred to Billing document. I am not sure whether there is any config related. (KEPC hs already been done in such case). Would any expert can help on that?

en, It is solved now. Untick "Transfer aux. CC Split" in KE40, then the value can transported to billing.
Edited by: Ying Zhu on Nov 18, 2008 1:10 PM

Copying Text From Sales order to Billing Document

Hi all,
I have searched all posts for my issue but found nothing so that i am posting this issue.
I want to copy the Some text form sales order to billing document is there any cnfig to do this
order is there any exit for billing in which i can write code to copy text from sales order to billing document.
please provide me a solution.
Thanks in adavnce.
Vinod.

Hi,
Use the same t-code VOTXN to do access sequence assignment.
When you choose text object Billing Doc (header/item), there is 3 folders in dialog structure:
- Text procedure
- Access sequence
- text procedure assignment
In the text procedure folder, select related text procedure, then assign the created access sequence to respective text id.
Hope this help.
Cheers,

How to display Header Texts that you find in Sales Order and Billing Doc..

Hi,
I am having some problems accessing the text that is typed in the Header Texts area of the Sales Order and Billing. To access the Header Text you should first trigger the Sales Order (VA02) then once in the Sales Order Click Goto -> Header -> Texts. The same follows to the Billing.
I need to extract what is typed here on to a report. First of all I cant figure out which table is used to save this information. I am suspecting that this information is encoded and stored in a table. To display this I may need to decode it.
Is there some one who could help me to archive this please!!!
Many Thanks,
Kishan

Hi Kishan,
The texts you find in all SAP Object, like orders, invoice, materials, ... can be extract with FM 'READ_TEXT'.
To know the parameters of the FM, you 'll have to go to the text ( in plain page mode ), then you do "GOTO" -> "HEADER", and a pop-up window opens with the parameters you need ( Text name, language, text id, text object ).
The table "t_tdline" contains the entire text .
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    id                            = w_id
    language                      = sy-langu
    name                          = w_name
    object                        = w_object
*   ARCHIVE_HANDLE                = 0
*   LOCAL_CAT                     = ' '
* IMPORTING
*   HEADER                        =
tables
    lines                         = t_tdlines
hope this helps.
Erwan.

BOM selection in sales order

hello, friends.
when selecting the BOM in the sales order, the selection screen displays alternative BOMs for 1 usage type only, and will show the other usages one at a time only if the first type does not exist. the sequence depends on the priorities (access sequence) set in IMG, and settings in item category.
my questions are:
1. does the 'next page' button in the selection screen refer to additional BOMs of the only same usage type?
2. is it possible to show other usage types in the same selection screen? if yes, where do we configure this
many thanks for your inputs.

hello, Rags.
actually, BOM selection is working fine for us. my question was more of a theoretical one. to clarify the issue, let me cite an example:
1. for material A001, i create 5 alternative BOMs.
2. of these 5 BOMs, 3 have usage type SD, and 2 have usage type Production.
3. when you enter your BOM header material in the sales order, a selection screen will appear. because of the priorities set in IMG, it will show you only the 3 alternate BOMs of the SD usage type.
3. the system will display the 2 other production BOMs only if there are no SD usage BOMs or if these have been deactivated, or if you change the order of priority in IMG.
4. you cannot change the usage type in the BOM selection screen because this field is not available for input. there are "next page" buttons, and i'm wondering if this is or is not just for long lists of alternate BOMs with a single usage type.
my question: is it possible to show all 5 BOMs regardless of usage in the same list, or in different pages?
many thanks.
Edited by: jonathan y on Apr 3, 2009 7:55 PM

Abt BOM. in contract sales order & in bill

Similar Messages

Maybe you are looking for