Access Connections and Tools won't install properly

I have followed advice uninstalled the wireless driver, access connections, hotkey, power manager. . Reinstalled all ( latest versions) except access connection. Wireless connections work correctly and all hot keys function appropriately ( including Fn +F5 ). Then I let TVSU download Access connections. An icon is placed in the task tray. Clicking on it nothing happens. Also none of the hot keys work including the blue ThinkVantage key. Once I uninstall Access connection I am back in business with the wireless connection and the hot keys working. ( for all these installs I turned off the Microsoft virus scanner and the firewall).
Have similar problem with ThinkVantage tools in that I get the Icon in the task tray and then the program freezes. No problem in reinstalling  PC doctor5
T60 series2007 Windows XP professional pack3.

Hi dulverton,
I find lenovo drivers and software rather eccentric; since they need to be installed in a particular order to work properly.
First uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
Further this is the order in which the following drivers must be installed for each of them to function desirably:- 
1) Lenovo PM driver
2) Lenovo System Interface Driver
3) Hotkey driver
4) Wireless driver software [reboot]
5) Access Connections [reboot]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution! 
  Lenovo Deutsche Community     Lenovo Comunidad en Español 
Visit my YouTube Channel

Similar Messages

  • Access Connection and CP_SecuRemoteSecureClient_NGX_R60_HFA3

    Hi,
    I am having troubles with the Lenovo Access Connections 5 and the Checkpoint RemoteSecureClient for establishing VPN connections. 
    The VPN tunnel will setup when using LAN or WLAN. I have also installed the Vodafone dashboard wich will allow VPN connections. But when i use the access connection the VPN gate way cant be reached. Anything else works with vpn. I can connect to the ISP and i get an IP assigned. Surfing works.
     I hace noticed the checkpox VPN in the Access Connections. I have enabled it and selected my vpn software. Still not working. Disabaled the firewall. Nothing.
    I have noticed that the vodafone dashboard creates a Dail-Up entry while AC 5 just enabled the adaptor device.
    Maybesome one has experience with this problem.
    System
    X301
    OS Win 7
    Access Connections 5
    CP_SecuRemoteSecureClient_NGX_R60_HFA3

    Hi,
    try to open Access Connection and Edit your profile, that you are using for this VPN connection.
    Go to Additional Settings tab and select the "Settings" , that is next to Override TCP/IP and DNS sufix.
    Make sure, that you configure these settings correctly.
    Once this is done, it should work just fine.
    Cheers

  • Restored iPod, and it won't install the 5.0 update. What can i do?

    I restored my ipod for the most recent update from 4.0 to 5.0 and it won't install the software, it just keeps freezing at exactly the same point each and every time.

    At what stage does it freeze?  What is showing in the status bar?
    This may be applicable:
    Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
    There are two ways to resolve this:
    You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
    For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
    Go to Edit > Find.
    Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
    Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
    Delete the "TcpWindowSize" entry.
    Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
    Close Regedit, restart the PC, and test.
    If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
    If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
    From:
    http://support.apple.com/kb/TS3694

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?

    does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?
    i had it work on my second gen mba but now it wont work

    Hi David
    I meant to say 5.1 the problem I've got is it's saying it does support ppc software but I have got the intel version but for some reason won't install from disc but if I transfer from time-machine backup it works
    But then it won't read my project it's so strange just don't get it 

  • I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons

    I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons.  How do I fix this?

    Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.

  • Help me I bought PSE 13 and it won't install on my new HP ENVY notebook.

    Help me I bought PSE 13 and it won't install on my new HP ENVY notebook. Error 7.

    cs5,cs5.5: https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    lightroom: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html
    photoshop elements 13: Installation errors | Exit Code: 6 and 7 suberrors
    premiere elements: http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

  • My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

    My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

    I have network connection and it still says I don't, I've restart my computer mulitple times everytime it says I don't have connection.

  • I bought snow leopard and it won't install

    I bought Snow Leopard and it won't install.  It keeps saying, "You can't use this version of the application Install with this version of Mac OS X.  You have Install Mac OS X 23.1.1."

    Hi stedman, in theory, since the machine is a 2008, going from Lion to Snow Leopard should be possible, but requires the usual startup proceedure, boot holding the C key, then since ML is on the hard drive you must do an erase and install.  You cannot do a reinstall.  I say in theory because if all firmware updates have also been done following installation of Lion, there may be a firmware block now causing problems reading the SL disk.
    That is the problem we all face trying to help diagnose these situations remotely...incomplete information.
    So, for bistraung: how exactly are you trying to install SL?  Are you trying to restart your computer with the SL disk in the optical drive and holding the C key?  Or, are you trying to read the disk directly?  You cannot do the latter.
    Do you have a backup of the drive?  If you do the SL install, you must erase the hard drive before installing SL which means you lose everything on the hard drive.  So me sure you have a backup or you cannot get anything back.
    Best approach would be get an external hard drive, format it Mac OS Extended (Journaled), GUID partition table, and then use Carbon Copy Cloner to make a bootable clone of the internal hard drive.  I say CCC instead of SupperDuper since CCC does a better job of also cloning the Recovery Hard Drive, which will be important if you need to work on Lion at all.
    With a bootable clone, you can boot to either SL on the internal drive or Lion on the external drive...gives you options.

  • Updated ipod touch to software version 51.1 and now won't install certain apps

    updated ipod touch 4th gen with software version 5.1.1 and now won't install purchased apps family guy time warp and uncensored. Help please as now i can't use my purchased games.

    What happens if you just restore to factory defaults/new iPod (not from backup)?
    If you still have the problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

  • Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

    Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

    See KB Article:  http://support.apple.com/kb/HT1274 Changing or resetting an account password
    my current country does not have a apple store....
    AS are not the only places that repair Macs.  Check out the following:
    International AASP’s & Other Services
    AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)
    Also, there are User Groups that can possible help.

  • HT2845 My magic mouse dropped connection and now won't pair with the mac.

    My magic mouse dropped connection and now won't pair with the mac. When I search for it, it finds the mouse but just won't connect. Any ideas?
    (I've tried new batteries)

    Try resetting the PRAM and SMC.
    Barry

  • I bought lightroom 6 upgrade and it won't install

    I bought lightroom 6 upgrade and it won't install.
    I download the file and run set up, I log into adobe and then it says it does not find a product
    Ihave lightroom 5.71 installed at present.
    I spent 24 hours waiting to install and then when I download it won't install!!!!
    I am not happy.

    I get this error if I try to download from link in my account. Using Chrome on Windows 7
    413
    Header Length too Large
    https://store1.adobe.com/cfusion/store/html/index.cfm?event=displayDownloads&orderNumber=A D002894780UK

  • Just installed vista and bootcamp won't install because it needs windows 7 in order to install properly

    Hey so i just bought by 15" MacbooK Pro yesterday and wanted to install windows vista on it. I'm to the part where you're supposed to install windows bootcamp but a message comes up saying that it needs windows 7 in order to install properly. What do i do?? I have the upgrade version of windows 7 (whcih i was going to eventually install) but when i tried installing it an error message came up saying that it needs vista service pack 1 to install. In order to install that service pack I need to connect to the internet. I can't connect to the internet, though, without installing the drivers from bootcamp!! AHH! see how this is frustrating? PLEASE HELP ASAP!

    Reboot your computer while holding down the option key. You should be presented with the option to boot into OSX. Once booted into OSX start Boot Camp Assistant and select remove the Boot Camp Partition.
    I know Boot Camp Assistant was not installed in Windows. It is an OSX application for creating and removing a Boot Camp partition. It is run from OSX.

  • T500: Access Connections and windows wifi management issue PostPosted: Fri Oct 29, 2010 2:31 pm

    Hello all,
    This is my very first post here so please beare with me.
    My T500:
    Product: ThinkPad T500 2056-AK5
    Operating system: Windows 7 Home Premium x64 (but same problem on Ultimate x64)
    Original description: Based 2056-4RG: T9400(2.53GHz), 3GB RAM, 160GB 7200rpm HD, 15.4in 1680x1050 LCD, 256MB ATI Radeon HD3650, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, 9c Li-Ion, WinVista Business 32
    The wifi NIC is Intel 5100 AGN, the gigabit is 82567LM. I bought also an Ericsson F3507g Mobile Broadband modem. All are working as supposed.
    The win7 is freshly installed from recovery dvd's, all updates, both Lenovo and Micro$oft are up to date.
    The problem: Access connections seems to be "behind" the automated wifi management of windows 7. I have two, three profiles saved for may home wifi network, my office wifi network and so on. My home network has settings like 192.168.7.xx, no encryption, only MAC registration, the office network has 192.168.4.xx, encryption WPA, therefore a switch is needed everyday between these.
    The problem is that AC doesn't do that, eventually doesn't even switch between locations at all. In AC->Tools location switching is properly set up
    The T500 connects let say at home, then when I starts in the office it connects to the office network but still using my home IP (192.168.7.xx) even if I saved in the profiles different IP numbers for both location. I have tried stopping the windows wifi connection service but then AC stop either.
    This seems to me like windows try and force reconnect to the new network with the old settings, even before AC could interfere with its settings saved in profiles.
    Only 2 things I can do:
    1. in windows' wireless network and sharing center I choose to start manually these networks, then start them manually from AC;
    2. Stop the network as connected automatically by windows (with wrong IP settings) then restart it from AC;
    Both these are frustrating because my good old T60 running winXP did this automatically, without my inference.
    Could anyone help me out of these, please?

    I had similar problems with my T400.  AC would refuse to even show my access point most of the time.   I finally gave up and uninstalled AC.  The Windows 7 wifi management works just fine, but no profiles
    Others on this forum smarter than me insist that AC works with Windows 7, just not for me.  It worked perfectly when running XP on this T and on my T61.
    If you dump AC, do the basic wifi functions work for you?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for