Access Point Best Practice

I have 5 access points, what is the best practice about the configuration of the channel of the access points, all access in the same channel, all access in different channel ? (802.11b/g).
Thanks

Hi!
Use non overlapping channel 1-6-11 on 3
consecutive AP's.
eg.
AP1-Channel 1
AP2-Channel 6
AP3-Channel 11
AP4-Channel 1
AP5-Channel 6
plzz take a look:
http://www.cisco.com/en/US/products/hw/wirele
ss/ps441/products_tech_note09186a00800a86d7.shtml#nonover
HTH
-Jai

Similar Messages

  • Anywhere Access interface best practice

    Hello,
    We are setting up Anywhere Access on Windows 2012 AD/DNS with the following configuration;
    Ethernet 1:
    IP: private
    Subnet: 255.255.255.0
    Gateway: Firewall/Router with private IP address 
    DNS: Ethernet 1 IP address
    Ethernet 2:
    IP: public (remote.domain.com - Anywhere 
    Subnet 255.255.255.248
    Gateway: DSL modem with public IP address
    DNS: Ethernet 1 IP address
    Questions:
    1. Considering only one gateway can be defined for multiple interfaces, from the best practices point of view please advise which one should be the gateway out of two underlined gateways:
    Firewall/Router with private IP address or
    DSL modem with public IP address
    2. Considering Ethernet 2 is configured with public IP addresses, please also advise if DNS for Ethernet 2 is correct or it should be public DNS. 
    Thanks.

    Generally the private interface. This one may help.
    Configuring and Customizing Remote Web Access on Windows
    Server 2012 R2 Essentials
    or try them over here.
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials&filter=alltypes%2Cnoreplies&sort=lastpostdesc
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Oracle R12 HCM to SCM Key Integration Points Best Practice Documentation

    My client is implementing Oracle R12 HCM and SCM modules on a Single Global Instance and would like to know if there are any key integration points or best practice documentation.
    Impacted Scenario’s include:
    1.     Multiple Business Groups
    2.     Retiree Business Groups
    3.     Ex-Pats
    4.     Return to Workers (Payroll vs Pension)
    Thank you,
    Steve

    My client is implementing Oracle R12 HCM and SCM modules on a Single Global Instance and would like to know if there are any key integration points or best practice documentation.
    Impacted Scenario’s include:
    1.     Multiple Business Groups
    2.     Retiree Business Groups
    3.     Ex-Pats
    4.     Return to Workers (Payroll vs Pension)
    Thank you,
    Steve

  • Access Connections best practice

    I like the idea of having Lenovo Access Connection change the appropriate settings depending on you network location. Like turning off wifi when you are cabled.
    Althoguh I often find it to be creating more problems than gains.
    Any generel best practice using this tool?
    Regards, Lars.

    Hi!
    Use non overlapping channel 1-6-11 on 3
    consecutive AP's.
    eg.
    AP1-Channel 1
    AP2-Channel 6
    AP3-Channel 11
    AP4-Channel 1
    AP5-Channel 6
    plzz take a look:
    http://www.cisco.com/en/US/products/hw/wirele
    ss/ps441/products_tech_note09186a00800a86d7.shtml#nonover
    HTH
    -Jai

  • Ftp access docroot best practice

    I have installed WS 7.0, created a dir /docroot with owner:group websrvd:webservd. What is a "good" way to send files to /docroot via
    ftp? I only ftp over my local lan; access is not allowed outside of the local
    lan. Should I set up a new user in group webservd with ftp access?
    OR how do I set up a user for example dummy:staff to be able to
    write files to /docroot? Thank you, I am trying to figure out what are
    the best practices.
    Thanks in advance for any assistance.
    Mark.

    Irek,
    This is off subject but I wanted to talk to you about a previous issue that you where having in [This Thread|http://forum.java.sun.com/thread.jspa?messageID=9751068#9751068] .
    ireneusz.tarnowski wrote in another thread:
    Hi,
    I've noticed many failures in my error log. I use SJSWS 6.1u7. Some example are below:
    [04/Jul/2007:11:29:11] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:32:40] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:32:41] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:34:53] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:35:45] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)
    [04/Jul/2007:11:37:21] failure ( 9310): HTTP3068: Error receiving request from 156.17.73.28 (Connection refused)The IP address which is noticed in error line is a router of some NAT in my corporation. I want to tune my webserver and receive all request from this address.
    Any idea?
    IrekDid you ever figure out how to fix this issue with the Sun Webserver 6.1 that you had back in July last year with the "Error receiving request from <ip address> (Connection refused)" messages? We are getting the same errors on our Sun ONE / Sun Java System webserver version 6.1 SP6. Please let me know.

  • AP541 Access Point Best config for multiple VAPS Advice

    Hi
    I have several AP541 (on different site locations) which I have currently configured for WPA enterprise using windows 2008 as the Radius server. This works fine for staff members who use the wireless when roaming around the offices.
    I would also like to setup another VAP for guests to allow them to access our internet but nothing else on the network. I was wondering what approach would be the best one to adopt to achieve this. Would I be best to setup a WPA Personal VAP and allow guests to access the wireless this way. Or is there a better approach? If we did adopt this approach I presume this would mean that we have to log onto each AP in turn and then change the WPA key on each one everytime we decide to change the key? Or is there some clever software I could use to change them all in one go.
    Any help would be appreciated
    Thanks
    Colin

    Hello Simon,
          I would keep them all in Access Point mode if you are planning on having them all hardwired into your network. That is the best setup.
         As for Wireless WDS repeater or Wireless Client/Repeater, you would use these features if you are trying to extend your wireless signal at a certain location in your building but you are not able to run a ethernet cable to that location. So all you would do is power up the WAP4410n and it will help increase the wireless signal in that location if set in repeater mode. The draw back to this is it will cut your througput by half.
    Wireless WDS bridge, you would use this feature if you are wanting to extend your network to a location were you are not able to run a ethernet cable to. Once you set up the bridge you would place it in the location were you are wanting to extend your hardwire network. If you plug a PC into the ethernet port on the Bridged WAP then you should be able to pull a IP address from the main network. When set in this mode it will not broadcast a wireless signal.. so you will not be able to connect wirelessly to the device once it is in Wireless Bridge mode.
    Wireless Monitor.. not sure about this feature.. never used it.
    This keep in mind that these devices will usually only bridge or use repeater with themselves and not other devices.
    If you are wanting to start adding VLANs in the future you will need to stick to Access point mode since that mode will allow you to set up more than one VLAN the WAP can look out for. If you use repeater or bridge mode feature you will only be able to use 1 vlan.
    I hope that helps you out!
    Thanks,
    Clayton Sill

  • ACE access-list best practice

    Hi,
    I was wondering what was the best practice for the access-list's on the Cisco ACE.
    Should we permit Any in the access-list, and classify the traffic in the class-maps as seen in a brief example:
    access-list ANY line 10 extended permit ip any any
    access-list EXCH-DMZ-INTERNET-OUT line 10 extended permit tcp 10.134.10.0 255.255.254.0 any eq www
    access-list EXCH-DMZ-INTERNET-OUT line 15 extended permit tcp 10.134.10.0 255.255.254.0 any eq https
    class-map match-all EXCH-DMZ-INTERNET-OUT
      2 match access-list EXCH-DMZ-INTERNET-OUT
    policy-map multi-match EXCH-DMZ-OUT
    class EXCH-DMZ-INTERNET-OUT
        nat dynamic 1 vlan 1001
    interface vlan 756
      description VLAN 744 EXCH DMZ BE
      ip address 10.134.11.253 255.255.255.0
      alias 10.134.11.254 255.255.255.0
      peer ip address 10.134.11.252 255.255.255.0
    access-group input ANY
      service-policy input EXCH-DMZ-OUT
    Or should we also also the access-list for the access-group in the interface as seen bellow:
    access-list EXCH-DMZ-INTERNET-OUT line 10 extended permit tcp 10.134.10.0 255.255.254.0 any eq www
    access-list EXCH-DMZ-INTERNET-OUT line 15 extended permit tcp 10.134.10.0 255.255.254.0 any eq https
    class-map match-all EXCH-DMZ-INTERNET-OUT
      2 match access-list EXCH-DMZ-INTERNET-OUT
    policy-map multi-match EXCH-DMZ-OUT
    class EXCH-DMZ-INTERNET-OUT
        nat dynamic 1 vlan 1001
    interface vlan 756
      description VLAN 744 EXCH DMZ BE
      ip address 10.134.11.253 255.255.255.0
      alias 10.134.11.254 255.255.255.0
      peer ip address 10.134.11.252 255.255.255.0
      access-group input EXCH-DMZ-INTERNET-OUT
      service-policy input EXCH-DMZ-OUT
    Regards,

    Hello,
    I don't think you'll find a "best practice" for this scenario.  It really just comes down to meeting your needs.  The first example you have a far and away the more commonly seen configuration, as you'll only NAT the traffic matching the EXCH-DMZ-INTERNET-OUT, but all other traffic will be forwarded by the ACE whether it is load balanced or not.  The second way will only allow NAT'd traffic, and deny all others.
    Hope this helps,
    Sean

  • Seaching for Best Practice links that work

    Hi,
    past few years I have been able to access SAP Best Practices documents like SAP Best Practices SAP Best Practices for CP and Wholesale Industries
    (this one still works and guides me to the building block and process overview documents!).
    Recently any link I can find to SAP Industry or Baseline Best Practices ends up with a dead link. See for example trying to get from here SAP Best Practices Baseline packages – SAP Help Portal Page
    to Localized for Netherlands V1.607 SAP Best Practices package further below on that page, results in screen shot attached. I have seen that in many more examples (different countries, or in Industry Best Practice Packages instead of Country Baseline packages....)
    Does any know whether and how SAP redesigned their access to Best Practices documents (Configuration Guides, eCatts, Scenario Process Overviews etc.?
    Thanks for your reply.
    Thijs

    Hi, Thijs,
    There is currently a problem with Best Practices on the Help Portal.  On the home page of the portal (http://help.sap.com/) there is a message that reads "Stay Tuned - There are temporary problems when accessing some content types, for example PDF documents or Best Practices. We are working on a solution."
    Our Wholesale Distribution industry group does not manage the Help Portal pages, so, unfortunately, I don't know the status of the problem or when it might be resolved.
    Lynn

  • _h and _v Content, Best Practice

    Hello
    while i am working on the same content of an article as _h and _v, i noticed in _h i added 7 pages while in the _v there are 6 pages,
    and i relised this is not good to get the perfect result.
    so i add one more page in the _v, and started to change the size of the images so the contents goes to page 7.
    i was able to do that, and then i noticed that the 14th subtitle in the _h is in the 5th page and the same subtitle in the _v is in the 6the page.
    is this normal? or do i have to math the content so the reader when rotatiting will get the same result so he can folow reading.
    regards

    Hi Greg:
    To access the Best Practices using Business Content  do the following:
    1.-Open this URL: http://help.sap.com/bp_bw370/html/index.htm
    2.-Click on the "Preconfigured Scenarios" link.
    3.-Click on the Links to navigate on the different available scenarios and to see the documents you can download (Scenario Documentation, Scenario Installation Guide and Building Blocks).
    *Financials
    -- Financial Accounting Analysis
    -- Controlling Analysis
    -- CO-PA Analysis
    -- Cost Center Planning
    -- Reporting Financials EhP3
    *Customer Relationship Management
    -- Sales Analysis
    -- Cross-Functional Analysis: Financial and Sales Data
    -- Booking Billing Backlog Analysis
    -- Sales Planning
    -- Scheduling Agreements Analysis
    -- CRM Analytics
    *Supply Chain Management
    -- Purchasing Analysis
    -- Manufacturing Analysis
    -- Inventory Analysis
    -- Demand Planning Analysis
    -- Resource and Operation Data Analysis
    *Product Lifecycle Management
    -- Project System - Controlling and Dates
    *Human Capital Management
    -- Cross-Application Time Sheet
    -- Time Management - Time and Labor
    -- Personnel Development - Qualifications
    -- Travel Management - Travel Expenses
    *General
    -- Data Mining - ABC Classification
    Regards,
    Francisco Milán.

  • Business Content Best Practice

    How do we go about evaluating Business Content for a project? Any tips/tricks/best practice used when dealing with Business Content?
    What are the dos and don't of Business Content?

    Hi Greg:
    To access the Best Practices using Business Content  do the following:
    1.-Open this URL: http://help.sap.com/bp_bw370/html/index.htm
    2.-Click on the "Preconfigured Scenarios" link.
    3.-Click on the Links to navigate on the different available scenarios and to see the documents you can download (Scenario Documentation, Scenario Installation Guide and Building Blocks).
    *Financials
    -- Financial Accounting Analysis
    -- Controlling Analysis
    -- CO-PA Analysis
    -- Cost Center Planning
    -- Reporting Financials EhP3
    *Customer Relationship Management
    -- Sales Analysis
    -- Cross-Functional Analysis: Financial and Sales Data
    -- Booking Billing Backlog Analysis
    -- Sales Planning
    -- Scheduling Agreements Analysis
    -- CRM Analytics
    *Supply Chain Management
    -- Purchasing Analysis
    -- Manufacturing Analysis
    -- Inventory Analysis
    -- Demand Planning Analysis
    -- Resource and Operation Data Analysis
    *Product Lifecycle Management
    -- Project System - Controlling and Dates
    *Human Capital Management
    -- Cross-Application Time Sheet
    -- Time Management - Time and Labor
    -- Personnel Development - Qualifications
    -- Travel Management - Travel Expenses
    *General
    -- Data Mining - ABC Classification
    Regards,
    Francisco Milán.

  • Best practice for having an access point giving out only a specific range

    Hey All,
    I have an access point which is currently set to relay all dhcp request to the server DC-01, However the range that has been setup is becoming low on available IP addresses so I have been asked if it is possible to setup another range for the AP only.
    Is there a way to set the DHCP up with a new range and say anything from that access point it will then give out a 192.168.2 subnet address as apposed to the standard 192.168.1 subnet?
    Or would it be easier / better to create a superscope? and slowly migrate the users to a new subnet with a larger range?
    Any help suggestions would be appreciated
    thanks
    Anthony

    Hi,
    Maybe we could configure a DHCP superscope to achieve your target.
    For details, please refer to the following articles.
    Configuring a DHCP Superscope
    http://technet.microsoft.com/en-us/library/dd759168.aspx
    Create a superscope to solve the problem of dwindling IP addresses
    http://www.techrepublic.com/article/create-a-superscope-to-solve-the-problem-of-dwindling-ip-addresses/
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Looking for some best practice regarding Content Administrator access

    Hi. I am looking for some best practice or rule of thumb from SAP or from different companies how they address Portal Content Administrator access in Production environment. Basically, our company is implementing portal to work with SAP BW.  We are on SP 9. Basically, I am trying to determine if we should have 1-2 Portal Content Administrator in Production with 24/7 access or we should limit them from NOT having this.  Can you share with me some ideas of what is right? and what is not?
    Should we have access in Production? Or Should we have this access but limited? By the way, our users are allow to Publish BI reports/queries into Production.

    Hello Michael,
    Refer to this guide about managing initial content in portal.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
    Regards
    Deb
    [Reward Points for helpful answers]

  • Best practice for integrating a 3 point metro-e in to our network.

    Hello,
    We have just started to integrate a new 3 point metro-e wan connection to our main school office. We are moving from point to point T-1?s to 10 MB metro-e. At the main office we have a 50 MB going out to 3 other sites at 10 MB each. For two of the remote sites we have purchase new routers ? which should be straight up configurations. We are having an issue connecting the main office with the 3rd site.
    At the main office we have a Catalyst 4006 and at the 3rd site we are trying to connect to a catalyst 4503.
    I have attached configurations from both the main office and 3rd remote site as well as a basic diagram of how everything physically connects. These configurations are not working ? we feel that it is a gateway type problem ? but have reached no great solutions. We have tried posting to a different forum ? but so far unable to find the a solution that helps.
    The problem I am having is on the remote side. I can reach the remote catalyst from the main site, but I cannot reach the devices on the other side of the remote catalyst however the remote catalyst can see devices on it's side as well as devices at the main site.
    We have also tried trunking the ports on both sides and using encapsulation dot10q ? but when we do this the 3rd site is able to pick up a DHCP address from the main office ? and we do not feel that is correct. But it works ? is this not causing a large broad cast domain?
    If you have any questions or need further configuration data please let me know.
    The previous connection was a T1 connection through a 2620 but this is not compatible with metro-e so we are trying to connect directly through the catalysts.
    The other two connection points will be connecting through cisco routers that are compatible with metro-e so i don't think I'll have problems with those sites.
    Any and all help is greatly welcome ? as this is our 1st metro e project and want to make sure we are following best practices for this type of integration.
    Thank you in advance for your help.
    Jeff

    Jeff, form your config it seems you main site and remote site are not adjacent in eigrp.
    Try adding a network statement for the 171.0 link and form a neighbourship between main and remote site for the L3 routing to work.
    Upon this you should be able to reach the remote site hosts.
    HTH-Cheers,
    Swaroop

  • Best practice for external but secure access to internal data?

    We need external customers/vendors/partners to access some of our company data (view/add/edit).  It’s not so easy as to segment out those databases/tables/records from other existing (and put separate database(s) in the DMZ where our server is).  Our
    current solution is to have a 1433 hole from web server into our database server.  The user credentials are not in any sort of web.config but rather compiled in our DLLs, and that SQL login has read/write access to a very limited number of databases.
    Our security group says this is still not secure, but how else are we to do it?  Even if a web service, there still has to be a hole in somewhere.  Any standard best practice for this?
    Thanks.

    Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
    I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
    using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
    http://pauliom.wordpress.com

  • What is best practice in FR ? Original Report access to Users or Snapshot

    Hi,
    can any one pls. let me know on what is the best practice in FR ? I need to give access to original reports to my users or the snapshot access only ? Users are not happy with snapshot access mainly during the closing time. What are the complications if i give access to original reports ? I'm using Batch scheduler, but users are unable to see the data some times. What will be the reason for this ?
    Thanks,
    PVR

    Hi,
    There are certainly many variables to have a look at. Server sizes is one concern, report size is another. Giving access to original reports is fine as long as concurrency and heavy usage don't take the servers down. That said, the reports that will be given access to their originals shouldn't run for 10 minutes for each query. Having 10 user connected to such reports will probably take reporting services down which makes the entire system useless. These types of reports should better be scheduled and shown as snapshots. However, some of these reports might have time-dependent information which needs to be refreshed at query time. In this case you could either give the access to original reports or schedule the reports to run say every 2 hours.
    Cheers,
    Alp

Maybe you are looking for