Access Services Not Working Correctly

I have deployed Access Services and kept to the correct steps accurately according to the Microsoft whitepaper on deploying it.
When I create a new Access app, this is the way it looks in a browser when I go into it:
As you can see, it looks quite terrible. If anyone can please help me with where to start, I would appreciate it. I did go through the white paper and make sure I followed all the steps.

I went to the app permissions and clicked the option to repair permissions if they seem to be broken, this seems to have corrected the CSS issue.
The other issue I am having is that from anywhere outside the network (and over the VPN) where the VM's are located, you cannot see any data in the Access 2013 Client.

Similar Messages

  • Access point not work correctly

    Hello everybody, I have a problem in my BlackBerry Passport. I can't turn on "access point" function,this function not work. Does this function work in the future OS updates?
    P.S access point give your internet from the mobile network to your WiFi

    Hotspot does work on all versions of BlackBerry 10 OS and all BB10 models. It is, however, controlled by your carrier. If it won't turn on you have one of several possible problems:
    1) Your mobile data is off or not working.
    2) You need to have Hotspot provisioned on your account by your carrier.

  • Remote Access Media Not Working correctly

    I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
    access the folders successfully since installing the new version last year.
    I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
    the issue or not.
    This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
    some mp3 files in the folder, but those were not seen either.
    I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
    work. It's probably the feature I miss most from Windows Home Server 2011.

    I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
    I'd love to get this working:
    Setup.exe Information: 0 : Launching GUI...
        ThreadId=1
        DateTime=2013-10-23T02:03:16.8596601Z
    Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4417397Z
    Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4447410Z
    Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4457406Z
    Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4467401Z
    Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
        ThreadId=3
        DateTime=2013-10-23T02:03:19.9957563Z
    Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
        ThreadId=3
        DateTime=2013-10-23T02:03:29.6280511Z
    Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
        ThreadId=3
        DateTime=2013-10-23T02:03:29.6440517Z
    Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
        ThreadId=3
        DateTime=2013-10-23T02:03:29.8080570Z
    Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
        ThreadId=3
        DateTime=2013-10-23T02:03:29.9290592Z
    Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
        ThreadId=3
        DateTime=2013-10-23T02:03:29.9290592Z
    Setup.exe Information: 0 : Pausing automatic updating...
        ThreadId=3
        DateTime=2013-10-23T02:03:43.5934789Z
    Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
        ThreadId=3
        DateTime=2013-10-23T02:03:44.4985065Z
    Setup.exe Information: 0 : wusa.exe exits with code 0.
        ThreadId=3
        DateTime=2013-10-23T02:07:29.2593836Z
    Setup.exe Information: 0 : Resuming automatic updating...
        ThreadId=3
        DateTime=2013-10-23T02:07:29.2593836Z
    Setup.exe Information: 0 : Starting to search update...
        ThreadId=3
        DateTime=2013-10-23T02:07:29.3043848Z
    Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
        ThreadId=3
        DateTime=2013-10-23T02:07:29.3343851Z
    Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
        ThreadId=9
        DateTime=2013-10-23T02:13:33.9205387Z
    Setup.exe Information: 0 : Windows Desktop Experience role is installed.
        ThreadId=3
        DateTime=2013-10-23T02:13:33.9215395Z
    Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
        ThreadId=3
        DateTime=2013-10-23T02:13:33.9275389Z
    Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
        ThreadId=5
        DateTime=2013-10-23T02:13:39.3497048Z
    Setup.exe Information: 0 : Windows Search optional feature is enabled.
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3507050Z
    Setup.exe Information: 0 : Turning on media feature auto-enabler...
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3617041Z
    Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3617041Z
    Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3627043Z
    Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
        ThreadId=1
        DateTime=2013-10-23T02:13:48.5809850Z

  • RD Web Access SSO not working correctly

    I have two Win 2008 r2 sp1 servers.  Both are RD Session host servers.  One of them is also serving as a RD Gateway server AND RD Web access server.  Most everything is working well and as planned.  However, I am having an issue with
    the the RD Web Access.
    In the RD Web access server configuration page, I've set "One or more RemoteApp sources" and I've added two servers there, separated by a semicolon (eg RDServer1;RDServer2), and as expected a long list of RemoteApps hosted on both servers is shown .  The
    issue is that whatever server is listed second (eg RDServer2) won't allow sso to work right  -- when I click a link for a RemoteApp hosted on RDServer1 I am not prompted again for login credentials.  However, when clicking a link for a RemoteApp
    hosted on RDServer2 I am prompted "Enter Your Credentials".  I've tried swapping the order of the "Source Name" servers, and after a reboot indeed links to the RemoteApps hosted on that second server now prompt for me to "Enter your credentials".
    Things I've tried:
    1. Trying various server name formats (IP address, NetBIOS name, FQDN, and more) to no apparent effect.
    2. Applied the hotfix from KB2524668 to both servers.
    3. Flushed the IE caches for the client machines.
    4.  Tried various AD login accounts
    5. Ensuring that the RD Web Access server is added to the local group "TS Web Access Computers" on both servers.
     This is one step that I'm not 100% sure of -- it is clear to me that the RD Session host server that doesn't contain RD Web access should be there, but I'm not totally clear as to whether the dual-duty RD Web server/RD Session host should have this setting.
     I've tried it both ways, but it doesn't seem to make a difference.
    I'm stumped.

    Kevin,
    That's it!  I have a separate SSL cert for each RD Session Host, and used the corresponding certs to sign RemoteApps for each.  I still don't see this requirement in the documentation (although they do mention exporting self-signed certs, but that
    is due to the fact that they are self-signed and not automatically trusted by client machines), but maybe I'm just blind.
    Regardless, the fix to my problem was to export the cert from my RDServer1, import it to RDServer2, then set RDServer2 to use that cert to sign the RemoteApp connections.
    Thanks for your assistance, I was really stuck.
    Chris

  • IPhone 4s GPS/location services not working correctly in Maps

    I have had an iPhone since the original, so I am not new to the way Maps works. Maps has been useless on my new 4s. It keeps pulling up locations from other states, or telling me I am at a location when I am 5-10 miles away. For example, I searched for Fireshouse subs ( I am in Florida) it found one match: Denny's in California?!? I searched for an autozone that I was a mile from and pulled one in Nebraska. Also, I can calulate a route, tells me I am 30 miles away, drive a mile, change start from Current Location, and then I am 10 miles away.... Is there a way to calibrate my GPS? This is very frustrating! thanks
    (is iPhone 4S really not a product in the drop down selection Apple?)

    Ok.. didn't need the 3 finger solute. I turned on Airplane Mode and left it there for 5min.
    Once I turned Airplane Mode off and services came back I went back to maps and got the "Will you allow Maps to see your location... blah blah".
    Now GPS services, both maps and loopt, working again. Maybe Airplane Mode OFF/ON reset/reconnected services? No idea, but I'm trackable again.
    Thanks for the quick replies.

  • I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
    IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
    Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
    As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
    Egypt authorised service providers : https://locate.apple.com/eg/en/

  • Parental Controls are not working correctly.  Websites I've listed under Allow Access are still blocked.  How can I fix this?

    Parental Controls are not working correctly.  There are websites I've listed under Allow Access, however they are still blocked. - such as:  Yahoo mail and USAA banking.  How can I fix this?

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • System Update not working correctly

    Hi forum,
    System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
    1: Not detecting old versions
    SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
    2: Not installing a suggested update
    Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
    3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
    Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
    Regards
    AH_DE

    Dear Herik,
    thanks for your answer.
    I checked the log  file and found thousands of entries. Here are the lines related to "Fix for ...".
    Info    2010-02-03 , 08:40:37
              bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
              Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
    Info    2010-02-03 , 08:40:43
              bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
              Message: Candidate list:
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
              Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
    ADDITIONAL ENTRIES 
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
              Message: System updated:
              Installed=0
              Not Installed=Tvsu.Beans.Update[]
              Deferred=0
              Download Failed=0
              Hidden=0
    Severe          2010-02-03 , 08:41:17
              bei Tvsu.Sdk.SuSdk.ShutDownApplication()
              Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
    Since I'm a normal user only, I can't interprete this information. Do you know what to do?
    Kind Regards
    AH_DE

  • Cooling fan not work correctly

    my computer says the cooling fan not work correctly plase visit www.hp.com.go/teachcenter/startup

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you
    It looks like you are having difficulties with regards to the Cooling Fan of your Netbook
    We will surely assist you with this
    According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue.
    Causes/Reason for this Issue:
    1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan
    Perform the  below shown troubleshooting steps:
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 03. Press and Hold the Power Button of the Notebook for a full minute
    Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
    Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 08. Now please wait till Unit loads Windows and then Shut down the Netbook again
    Step 09. You should clean all the Vents and Openings really good with a can of compressed air
    Note: If you are still getting the same error we need to replace the fan
    I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer
    You can also Check your warranty Here to verify the warranty status
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • RV042 Load Balancing not working correctly?

    We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
    WAN1 = Telepacific T1
    1.5Mbps down and 1.5Mbps up
    WAN2 = AT&T U-Verse
    12Mbps down and 5Mbps up
    I have it set to Load Balance, Primary WAN = WAN2
    Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
    Bandwidth is set to:
    WAN1 = 1000Kbps upstream & downstream
    WAN2 = 5040Kbps upstream & 12000Kbps downstream
    It seems to pick WAN1 a lot of the time.  Do I have something setup wrong?

    Ok, so what do you recommend? To setup binding for ports important to direct over say… WAN1 (my fast access) shall I also keep the bandwidth management set up as is, example:
    For me it’s confusing because this config appears to be clear to me that has to control traffic the way I want .
    Thanks for your response.
    H Aragon
    De: jasbryan
    Enviado el: lunes, 20 de febrero de 2012 03:18 p.m.
    Para: HECTOR MANUEL ARAGON
    Asunto: - Re: RV042 Load Balancing not working correctly?
    Home
    Re: RV042 Load Balancing not working correctly?
    created by jasbryan in Small Business Routers - View the full discussion

  • Trust computer does not work correctly

    http://support.apple.com/kb/HT5868 - this is the thing that makes me NOT continue using Apple products anymore. The feature does not work correctly and I am SICK of reinstalling drivers, turning on/off apple mobile service to get access to my files. I ask for a premanent fix OR REMOVE THIS CRAPPY feature you have put in !!!! You care about your customer satisfaction, am I correct ? Then I do expect an answer ( read this as permanent solution ) to this issue.
    I have been connecting to the very same PC for months. And it asks me to trust it every time, which does not work at all.
    iOS 7.0.4

    Dan, they never responded to this. And now you are telling me this is still going on with iP6 on iOS8. God, Apple started to really suck in some aspects. I have the phone, have unlocked it and have access to all apps and settings on it, even those photo/video files from the device itself! And I still need to give permission to the computer from the phone, just so I can access them on it?!? Seriously what the **** is with that feature and why does it not work correctly for us? Still the same on my current iP5 , iOS 7.1.2

  • SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

    I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
    I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
    It is working correctly in the report manager.
    <Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
            <OverrideNames>
                <Name Language="en-US">TAB delimited</Name>
            </OverrideNames>
            <Configuration>
                <DeviceInfo>
                    <FieldDelimiter xml:space="preserve">&#9;</FieldDelimiter>
                    <Encoding>ASCII</Encoding>
                    <UseFormattedValues>False</UseFormattedValues>
                    <NoHeader>False</NoHeader>
                    <FileExtension>TXT</FileExtension>
                </DeviceInfo>
            </Configuration>
          </Extension>

    Hi Dave0323,
    According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
    In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
    update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
    file like below:
    The result looks like below:
    Reference:
    CSV Device Information Settings
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Maybe you are looking for