Access point not work correctly

Hello everybody, I have a problem in my BlackBerry Passport. I can't turn on "access point" function,this function not work. Does this function work in the future OS updates?
P.S access point give your internet from the mobile network to your WiFi

Hotspot does work on all versions of BlackBerry 10 OS and all BB10 models. It is, however, controlled by your carrier. If it won't turn on you have one of several possible problems:
1) Your mobile data is off or not working.
2) You need to have Hotspot provisioned on your account by your carrier.

Similar Messages

  • Remote Access Media Not Working correctly

    I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
    access the folders successfully since installing the new version last year.
    I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
    the issue or not.
    This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
    some mp3 files in the folder, but those were not seen either.
    I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
    work. It's probably the feature I miss most from Windows Home Server 2011.

    I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
    I'd love to get this working:
    Setup.exe Information: 0 : Launching GUI...
        ThreadId=1
        DateTime=2013-10-23T02:03:16.8596601Z
    Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4417397Z
    Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4447410Z
    Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4457406Z
    Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
        ThreadId=3
        DateTime=2013-10-23T02:03:19.4467401Z
    Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
        ThreadId=3
        DateTime=2013-10-23T02:03:19.9957563Z
    Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
        ThreadId=3
        DateTime=2013-10-23T02:03:29.6280511Z
    Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
        ThreadId=3
        DateTime=2013-10-23T02:03:29.6440517Z
    Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
        ThreadId=3
        DateTime=2013-10-23T02:03:29.8080570Z
    Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
        ThreadId=3
        DateTime=2013-10-23T02:03:29.9290592Z
    Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
        ThreadId=3
        DateTime=2013-10-23T02:03:29.9290592Z
    Setup.exe Information: 0 : Pausing automatic updating...
        ThreadId=3
        DateTime=2013-10-23T02:03:43.5934789Z
    Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
        ThreadId=3
        DateTime=2013-10-23T02:03:44.4985065Z
    Setup.exe Information: 0 : wusa.exe exits with code 0.
        ThreadId=3
        DateTime=2013-10-23T02:07:29.2593836Z
    Setup.exe Information: 0 : Resuming automatic updating...
        ThreadId=3
        DateTime=2013-10-23T02:07:29.2593836Z
    Setup.exe Information: 0 : Starting to search update...
        ThreadId=3
        DateTime=2013-10-23T02:07:29.3043848Z
    Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
        ThreadId=3
        DateTime=2013-10-23T02:07:29.3343851Z
    Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
        ThreadId=9
        DateTime=2013-10-23T02:13:33.9205387Z
    Setup.exe Information: 0 : Windows Desktop Experience role is installed.
        ThreadId=3
        DateTime=2013-10-23T02:13:33.9215395Z
    Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
        ThreadId=3
        DateTime=2013-10-23T02:13:33.9275389Z
    Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
        ThreadId=5
        DateTime=2013-10-23T02:13:39.3497048Z
    Setup.exe Information: 0 : Windows Search optional feature is enabled.
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3507050Z
    Setup.exe Information: 0 : Turning on media feature auto-enabler...
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3617041Z
    Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3617041Z
    Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
        ThreadId=3
        DateTime=2013-10-23T02:13:39.3627043Z
    Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
        ThreadId=1
        DateTime=2013-10-23T02:13:48.5809850Z

  • RD Web Access SSO not working correctly

    I have two Win 2008 r2 sp1 servers.  Both are RD Session host servers.  One of them is also serving as a RD Gateway server AND RD Web access server.  Most everything is working well and as planned.  However, I am having an issue with
    the the RD Web Access.
    In the RD Web access server configuration page, I've set "One or more RemoteApp sources" and I've added two servers there, separated by a semicolon (eg RDServer1;RDServer2), and as expected a long list of RemoteApps hosted on both servers is shown .  The
    issue is that whatever server is listed second (eg RDServer2) won't allow sso to work right  -- when I click a link for a RemoteApp hosted on RDServer1 I am not prompted again for login credentials.  However, when clicking a link for a RemoteApp
    hosted on RDServer2 I am prompted "Enter Your Credentials".  I've tried swapping the order of the "Source Name" servers, and after a reboot indeed links to the RemoteApps hosted on that second server now prompt for me to "Enter your credentials".
    Things I've tried:
    1. Trying various server name formats (IP address, NetBIOS name, FQDN, and more) to no apparent effect.
    2. Applied the hotfix from KB2524668 to both servers.
    3. Flushed the IE caches for the client machines.
    4.  Tried various AD login accounts
    5. Ensuring that the RD Web Access server is added to the local group "TS Web Access Computers" on both servers.
     This is one step that I'm not 100% sure of -- it is clear to me that the RD Session host server that doesn't contain RD Web access should be there, but I'm not totally clear as to whether the dual-duty RD Web server/RD Session host should have this setting.
     I've tried it both ways, but it doesn't seem to make a difference.
    I'm stumped.

    Kevin,
    That's it!  I have a separate SSL cert for each RD Session Host, and used the corresponding certs to sign RemoteApps for each.  I still don't see this requirement in the documentation (although they do mention exporting self-signed certs, but that
    is due to the fact that they are self-signed and not automatically trusted by client machines), but maybe I'm just blind.
    Regardless, the fix to my problem was to export the cert from my RDServer1, import it to RDServer2, then set RDServer2 to use that cert to sign the RemoteApp connections.
    Thanks for your assistance, I was really stuck.
    Chris

  • Access Services Not Working Correctly

    I have deployed Access Services and kept to the correct steps accurately according to the Microsoft whitepaper on deploying it.
    When I create a new Access app, this is the way it looks in a browser when I go into it:
    As you can see, it looks quite terrible. If anyone can please help me with where to start, I would appreciate it. I did go through the white paper and make sure I followed all the steps.

    I went to the app permissions and clicked the option to repair permissions if they seem to be broken, this seems to have corrected the CSS issue.
    The other issue I am having is that from anywhere outside the network (and over the VPN) where the VM's are located, you cannot see any data in the Access 2013 Client.

  • Share point in server admin not working correctly... I think

    I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
    afp://server.mydomain.com/Users
    However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

    Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
    On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
    All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
    Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

  • Mouse pointer is not working correctly

    I have a MacBook Pro and the pointer is not working correctly.  It does not work smoothly and it is hard to get it to go where I need it to go.

    Hello billm46,
    Welcome to the Apple Support Communities!
    It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article. 
    Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
    Have a great day,
    Joe

  • Three Point Edit not working correctly :(

    Hi there,
    first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
    It appears that 3 point editing ist not working correctly.
    Right now I'm editing a video and I heavily rely on 3 point editing.
    I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
    Coming from tape workflows I really don't like clicking clip after clip...I need to edit
    Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
    Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
    As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
    Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
    It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
    Make us editors happy having switched from Avid/FCP etc.
    Make essential stuff rock solid. That's what makes an app "pro".
    Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

    bmfm_ wrote:
    I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
    Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
    Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
    Hi bmfm,
    I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
    Thanks,
    Kevin

  • Parental Controls are not working correctly.  Websites I've listed under Allow Access are still blocked.  How can I fix this?

    Parental Controls are not working correctly.  There are websites I've listed under Allow Access, however they are still blocked. - such as:  Yahoo mail and USAA banking.  How can I fix this?

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • System Update not working correctly

    Hi forum,
    System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
    1: Not detecting old versions
    SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
    2: Not installing a suggested update
    Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
    3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
    Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
    Regards
    AH_DE

    Dear Herik,
    thanks for your answer.
    I checked the log  file and found thousands of entries. Here are the lines related to "Fix for ...".
    Info    2010-02-03 , 08:40:37
              bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
              Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
    Info    2010-02-03 , 08:40:43
              bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
              Message: Candidate list:
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
              Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
    ADDITIONAL ENTRIES 
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
              Message: System updated:
              Installed=0
              Not Installed=Tvsu.Beans.Update[]
              Deferred=0
              Download Failed=0
              Hidden=0
    Severe          2010-02-03 , 08:41:17
              bei Tvsu.Sdk.SuSdk.ShutDownApplication()
              Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
    Since I'm a normal user only, I can't interprete this information. Do you know what to do?
    Kind Regards
    AH_DE

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

  • Sound blaster not working correctly?

    Sound blaster not working correctly #I have a 64 bit, windows vista system.
    A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
    I have an X-fi gamer sound card.
    I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
    When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
    When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
    Thanks for any help you can give, Robert

    Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
    First of all, if you compiled your sound as modules, try putting this in your rc.local:
    stat_busy "Activating Sound"
    /sbin/modprobe your_sound_module
    /sbin/modprobe other_sound_module
    /sbin/modprobe yet_other_sound_module
    stat_done
    Change your_sound_module stuff to your module names as you configured in the kernel, of course.
    Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
    And remember: nobody blames for asking 8)

  • Internet Explorer 11 "Enterprise Mode" do not work or do not work correctly!

    Dear community,
    Since yesterday we test the Feature "Enterprise Mode" for "Internet Explorer 11". However, we have many problems
    with this Feature. We have configured it as described by officially instruction by MS, but it does not work
    properly. Here is what we have done exactly to test this Feature:
    In Registry Key " HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Internet Explorer \ Main \ Enterprise Mode " we have created the Entry " Site List " and create the string " Enable" . In the
    String "Enable" we have added no value . 
    In Case of String "Site List" , we have specified the path to the XML file , as value of this String.
    The XML file was created with the Site List Manager from Microsoft
    And now, we regocnized following Problems:
    The "Enterprise Mode" ist only "active", if the User(!) check "Enterprise Mode" under "Tools"...!
    The site list is seemingly ignored, although in the Registry "currentversion" is pulled correctly, everytime we change
    the XML File. So we think "SiteList" is configured well.
    On one of our test computer freezes Internet Explorer 11 , if you try to hook the corporate mode
    In Summary, it seems to be configured properly but it even do not work or not work correctly.
    Our goal would be:
    Enterprise Mode + access to the Site List by IE11 should be "on" by Default!
    Entrys of sitelist.XML should be filtered and shown in "Enterprise Mode" or/and the right "DocMode", as configured.
    The user should have no chance  to check on or off the"enterprise mode"
    We use "Windows 7" on all our Clients, as test Clients are also running the same operating System...
    Please reply
    Thank you very much
    Greetings!
    Ps: Please do not be angry if pronunciation or grammar do not fit well. English is not my nature language (my nature language is german)

    Hi，
    According to your description, seems the end-users can manually turn on\off the enterprise mode, If you don''t want this, you can disable the option.
    Computer(User) Configuration > Administrative Templates > Windows Components > Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu option
    Disable this option, user will not have "Enterprise Mode" under "Tools", after that, please run gpupdate /force to update the policy, and get "Use the Enterprise Mode IE website list" applied again in the target system.
    After that, the enterprise mode website list get applied again, and user don't have an option to disable it.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for