Accessing movieclips on different frames.
Okay, So i have a gallery on my root timeline
The gallery is called work_mc. Inside of work_mc I have various buttons. There is a different section on different frames. For example, ALL is on frame one, PRINT is on frame two, motion is on frame three.
In the root here is the code:
work_mc.urbanthmb_mc.addEventListener(MouseEvent.CLICK, clickHandler);
work_mc.urbanthmb_mc.buttonMode = true;
function clickHandler(event:MouseEvent):void {
if (!workss_mc) {
workss_mc = new mc_workss();
workss_mc.addEventListener("closeButtonClick", onCloseClick);
workss_mc.x = 225;
workss_mc.y = 200;
work_mc.gotoAndStop("urbanflats");
addChild(workss_mc);
removeChild(work_mc);
function onCloseClick(e:Event):void {
trace("clickedtrue");
if (!work_mc) {
work_mc = new mc_work();
work_mc.x = 225;
work_mc.y = 200;
removeChild(workss_mc);
addChild(work_mc);
This is targeting the buttons that are on frame 1. How do I get to the buttons that are on frame 3? I tried just using the movieclip names but this doesnt seem to work?
ahh, okay. Just what I didn't want to hear ha.
The thing is here is that I am removing and adding children for the root, once I get into frame 3 then I am in work_mc and I will have to do the same thing that I am doing on the root which is:
var workss_mc:mc_workss;
work_mc.urbanthmb_mc.addEventListener(MouseEvent.CLICK, clickHandler);
work_mc.urbanthmb_mc.buttonMode = true;
function clickHandler(event:MouseEvent):void {
if (!workss_mc) {
workss_mc = new mc_workss();
workss_mc.addEventListener("closeButtonClick", onCloseClick);
workss_mc.x = 225;
workss_mc.y = 200;
work_mc.gotoAndStop("urbanflats");
addChild(workss_mc);
removeChild(work_mc);
function onCloseClick(e:Event):void {
trace("clickedtrue");
if (!work_mc) {
work_mc = new mc_work();
work_mc.x = 225;
work_mc.y = 200;
removeChild(workss_mc);
addChild(work_mc);
Then I am taking it to inside of work_mc since I have to work on frame 3
Here is my code for that, but it doesn't seem to be working correctly
var workss_mc:mc_workss;
urbanthmb1_mc.addEventListener(MouseEvent.CLICK, clickHandlerurban);
urbanthmb1_mc.buttonMode = true;
function clickHandlerurban(event:MouseEvent):void {
if (!workss_mc) {
workss_mc = new mc_workss();
workss_mc.addEventListener("closeButtonClick", onCloseClick);
workss_mc.x = 225;
workss_mc.y = 200;
workss_mc = new mc_workss();
this.gotoAndStop(1);
addChild(workss_mc);
this.parent.removeChild(this);
function onCloseClick(e:Event):void {
trace("clickedtrue");
if (!this) {
this.x = 225;
this.y = 200;
removeChild(workss_mc);
addChild(this);
When it does this, it is not removing work_mc OR this, it is just adding workss_mc..
Any ideas?
Similar Messages
-
Play multiple sound files in different frames from library in flash
My assessment task for college is to create a webpage of my work. So far it runs brilliantly except for this. I only need this to be working in like 2 days! Help!
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at Carolyns_Media_Portfolio_Scene1_fla::MainTimeline/frame5()
at flash.display::MovieClip/gotoAndStop()
Trying to be able to play sound clips from the library with the option to play and stop the sound file. Each sound has its own frame, with stop and play buttons. I can run the first sound file perfectly being able to start and stop it but when trying to play the next sound it creates the above error on output. I have dead buttons as well on the second sound.
The top buttons take you to each scene
The script runs from frame 5.
import flash.events.MouseEvent;
**buTrivia.addEventListener(MouseEvent.CLICK,clickListener7);
function clickListener7(event:MouseEvent):void {
SoundMixer.stopAll()
gotoAndStop("trivia");
buToyRA.addEventListener(MouseEvent.CLICK,clickListener8);
function clickListener8(event:MouseEvent):void {
SoundMixer.stopAll()
gotoAndStop("toyminatorRA");
buCaroline.addEventListener(MouseEvent.CLICK,clickListener9);
function clickListener9(event:MouseEvent):void {
SoundMixer.stopAll()
gotoAndStop("caroline");
buServerDown.addEventListener(MouseEvent.CLICK,clickListener10);
function clickListener10(event:MouseEvent):void {
SoundMixer.stopAll()
gotoAndStop("serverdown");
This was the script I found and edited. Only Trivia works
stop();
var triviaSound:trivia = new trivia()
var triviaChannel:SoundChannel = new SoundChannel();
buplay1.addEventListener(MouseEvent.CLICK, playSound1);
buStop1.addEventListener(MouseEvent.CLICK, stopSound1)
function playSound1(event:MouseEvent):void
triviaSound.play();
function stopSound1(event:MouseEvent):void
SoundMixer.stopAll()
gotoAndStop("trivia");
/*buplay2.addEventListener(MouseEvent.CLICK, playSound2);
bustop2.addEventListener(MouseEvent.CLICK, stopSound2)
var toysSound:toys = new toys();
var toysChannel:SoundChannel = new SoundChannel();
function playSound2(event:MouseEvent):void
toysSound.play();
function stopSound2(event:MouseEvent):void
SoundMixer.stopAll()
gotoAndStop("toyminatorRA");
Basically I want to play all the sounds, from the library, individually in different frames using the option to play and stop that sound. I found the above script but only works for one sound. I am new at scripting in flash so any help or even a better script option would be awesome. Thank youThe 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is declared but not instantiated
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved. -
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
How to communicate with another applet in different frame?
Hello,evryone
How to communicate with another applet in different frame?
Can you give some advices?
thank you!
zhongboqingi faced this problem one year ago.It would be something like that:
first you have to get the applet context 'getAppletContext()' (which is the current frame).
Then get parent of that context 'getParent()' (which is the browser context).
Then u can access the desired frame by its name. Finally you can access the desired applet located within this frame by -
Pass values between different frames
Dear Friends from Adobe.
I need a lot of help from you.
I have a project with Flash Action Script 2.0 and would like
to know if you have to pass values between different frames.
Example:
Passing a value of a inputbox the frame 1 for a inputbox in
frame 2.
OBS: If possible could pass the solution through e-mail?
Now, very grateful.
Diogo Areas.Using AS2 you can either name the input textfield instance on
the stage or, you can name the variable property of the input
textfield. You can name either of these from the Property Inspector
window. Once named, you can then have access to the value of the
text that is entered. It will be either instanceName.text or
variableName.
The scope of either of these values lasts only as long as the
textfield instance exists. So, if the first textfield is in frame
7, for instance, and is only in frame 7, and you want to use the
value in another frame, say frame 20, then you'll have to store the
value outside of the textfield for later use. You can do this by
creating a variable in the first frame of the movie, and then
placing the text from the textfield in frame 7 into that variable.
Then at frame 20, you can retreive that value and use it in the
textfield in frame 20.
Alternately, you can continue the instance of the textfield
in frame 7 out through frame 20. The content will continue to be
available. You can add keyframes to the layer that the textfield is
in at frame 7, and move the object off the visible area of the
stage, so that it won't be seen, if you like. -
Help with sequence settings in final cut for project with 2 different frame rates.
I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!
Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't??? -
Re-connecting media to different frame rate clip
Hi guys,
Wondering whether anyone can help me out to solve an error I've made...
So, I've basically completed an edit (some episodes on Final Cut Pro X, some on Final Cut 7) only to find out that I'd transcoded the media at the incorrect frame rate, 23.98 instead of 25fps. Yup, pretty big error. And now I need to redeliver the projects in the 25fps format.
I've transcoded a clip to the correct 25fps rate and tried to reconnect that clip to the 23.98fps one in the timeline, but I'm unable to reconnect as the clips are of differing frame rates.
Has anyone got any ideas how I can reconnect the clips or any suggestions that will make this situation easier to rectify rather than copying out the entire edit which will cause me to spend a week crying into my keyboard.
Thanks in advance for any suggestions.
OllyHmmm...
Tried this but it brings in the media that is 23.98 and there's no way I can tell to link to the new 25fps clips. Unless there's anything else I can do? Any other way to match the clips? (the 25fps clips are that little bit longer in duration) I also have some edits in fcp7. By using cinema tools in that would I be able to change the frame rates and link up to the new 25fps?
Cheers for the advice though Russ, this way does give me the template of the 23.98 edit so that I can match the new 25fps shots to, but it's gonna be a long process. -
Relink project clips with different frame rate
Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs. -
Creating new buttons on different frame labels
can someone tell me if im doing something wrong or assigning
the as to the wrong frame?
first off i have all my buttons on frame 2. im creating a
real estate site and i have to have a couple links like HOME ABOUT
BUYING SELLING CONTACT, the thing though is that in the BUYING and
SELLING frames i want to add more sections and links but only on
these 2 other parts of my site. when i code it and add new buttons
to these sections though my movie plays over and over and over non
stop. heres my coding...
FRAME 1 preloader
Frame 2 has a frame label of home and all the buttons on a
diff layer, and AS3 on a different layer
Frame 3 has a frame label for about section
Frame 4 is my contact for example
so if i create a new button in the about frame label and just
add the code to the working as3 code on frame 2 my movie just plays
over and over and over again, and all i want it do do is act like
the other buttons and go to a different frame label down in the
time line. the only way i get it to work is if i have ALL my
buttons on frame 2.
frame 1
my preloader
frame2
home_btn.addEventListener(MouseEvent.CLICK, onHome)
function onHome(event.MouseEvent):void
gotoAndStop("home");
about_btn.addEventListener(MouseEvent.CLICK, onAbout)
function onAbout(event.MouseEvent):void
gotoAndStop("about");
etc....
etc...
i enter my btn code just like this and the buttons on frame 2
work but any new buttons i try and creat and put into different
frames othere then frame label "home" aka frame 2 wont workcorrect.
there are lots of ways around it. but they all require the
object to exist when the code executes.
with as3 it's particularly easy to create objects, code for
them and then add them to the display list later when
needed. -
Different frame rate encoding on tape (24p & 24pa)
Hi,
I usually record to tape with my dvx100 using 24pa, but sometimes the quick setup dial was switched accidentally resulting in a different frame encoding, like 24p for example.
Everything is recorded in 29.97fps on mini-dv, we all know that, making apparently no difference b/w 24p and 24pa.
But of course, when i'm trying to capture this footage through FCP, i can't always remove the advanced pulldown because there's a few clips that have been recorded with 24p instead of 24pa.
Questions:
- How can you detect the different encoding on tape, whether it's 24p or 24pa?
- Can you get FCP to create a new clip (at least stop) the capture for those sections of the tape where I have something different than 24pa?
- If nothing like that is possible, how do you solve this problem?
Thanks!the only pulldown pattern that FCP can remove at capture is 24pA (3:2:2:3). Standard 3:2 pulldown can only be reversed using cinema tools. If you open the clip in cinema tools, you'll need to park the playhead on the first frame of the pulldown cadence for it to correctly remove the pulldown. This will create new copies of your clips, which will take up a corresponding amount of space. There is no way for either FCP or CT to reconize the pulldown cadence of standard 3:2 clips, so you'll have to manually find the A frame of the cadence. If you have a huge number of them to do, you may find it quicker to place each clip in a sequence where you can put the A frame of the cadence as the first frame in the sequence. Export these as a batch of reference movies, and you should be able to do a batch inverse telecine on them in Cinema Tools.
These new clips will no longer match the timecode of your tapes, so if you remove the original 29.97 media, you should at least keep the offline 29.97 clips in your project in case you need to recapture.
Hope this helps -
Max Average -
Different frame rate in movie mode? iPhone 4
I noticed that my iPhone shoots video clips with different frame rate from time to time. I suppose it slows frame rate on dark shots. For now all of my daylight shots are 30 fps, while night or dark ones are 25 and 24. This makes it hard to edit clips in iMovie for example, because difference in frame rate causes strobe motion effect on output.
!http://pics.livejournal.com/brain_away/pic/000040rc!
!http://pics.livejournal.com/brain_away/pic/00003s3c!
Anybody have the same?
For reliable results I would suggest to shoot two clips: one in sunny daylight conditions, another with ordinary room lightning, maybe a little darker than normal.
Please let me know of the results. ThanksDoesn't seem to be just a Quicktime bug:
!http://pics.livejournal.com/brain_away/pic/00005gw1!
+Created on: 12.09.2010 22:42:50 Московское летнее время
Report for file: IMG_0206.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................10s 193ms
Total File Size...................................12.9 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................24.697 fps
Total Frames......................................251
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.465
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................10s 163ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................12.8 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 04:13:59
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................10s 193ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................79.4 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 04:13:59+
+Created on: 12.09.2010 22:43:06 Московское летнее время
Report for file: IMG_0194.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................16s 579ms
Total File Size...................................21.0 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................29.970 fps
Total Frames......................................496
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.383
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................16s 550ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................20.9 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 02:45:06
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................16s 579ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................129 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 02:45:06+ -
Accessing tables from different schema in CDS and AMDP
Hi All,
We are working on a HANA system which has several schema replicated from SAP R/3/Non SAP systems. We have BW 7.4 SP9 deployed on the same system and accessing the HANA views using latest BW virtual objects such as Open ODS , Composite providers etc.
We are also using the BW system for few ABAP based data processing developments. We are currently accessing HANA views in ABAP programs by creating dictionary views based on external HANA views.
We would like to however use recent possibilities of CDS and AMDP for better life cycle management of ABAP based solutions. The open SAP course on this subject was of very good help. Thanks a lot "open SAP team" for that. I would however have few open questions,
As I understand AMDP gives us full flexibility of writing sql procedures within ABAP development environment, but can we access tables from different schema into AMDP code. If yes, then sample code would help.
If the answer of first question is yes, then how do we manage transports between development and production systems where the schema names would be different. Currently in open HANA developments, such transport is manged using Schema mapping.
Can I also use different schema tables in CDS views.
We are updating few tables in ABAP dictionary after applying processing logic in ABAP program as detailed in step 1. With the new approach using AMDP, can we directly update database schema tables which will give us an optimization advantage.
New ABAP HANA program interfaces are quite promising and we would like to use them to optimize many data intensive applications.
Thanks & Regards,
AnilHi Anil,
I can only answer 1. and 2. (and would be interested into 3. as well):
1.
Yes you can access tables from a different schema and also HANA views. In this case no 'using' is needed.
Examples:
RESULT = SELECT
FROM
"SAP_ECC"."T441V" AS t,
"_SYS_BIC"."tmp.package/AFPO" AS a.
WHERE ...
2. In this case, if you need schema mapping: You could use HANA (projection) views which just forward to a different schema, also see example.
Best regards,
Christoph -
How to load and unload more than one external swf files in different frames?
I do not have much experience on Adobe Flash or Action Script 3, but I know the basics.
I am Arabic language teacher, and I design an application to teach Arabic, I just would like to learn how to load and unload more than one external swf files in different frames.
ThanksLook into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.
-
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
How do I access music from different countries? My account is in Australia
How do I access music from different countries? My account is in Australia and I want to purchase music in Franch
In order to buy from another country's iTunes Music Store, you must have either:
a) a credit card with a billing address in that country, or
b) a mailing address in that country and a gift certificate or a prepaid card that was bought in that country.
If you cannot fulfill one of these two sets of conditions, you will not be able to purchase from any given country's iTMS.
This, BTW, is due to restrictions placed on Apple by the record companies and other rights holders (who are often completely different from country to country and so all require their own individual negotiations and contracts), not by Apple's choice.
Maybe you are looking for
-
Will only print one page of four page document
I have an HP LaserJet M1212nf and it will only print the first page of a four page document. I tried to check the preview settings and inserted "pages 1 to 4" and print "all", but neither works. What to do?
-
Not sure why this just started happening after Sync working fine since Mozilla changed the system months ago. Here's my log: 1406657461555 Sync.ErrorHandler DEBUG Flushing file log. 1406657461559 Sync.Status DEBUG Status.service: error.sync.failed_pa
-
HR REPORT about GET PAYROLL ISSUE!
HI i using LDB pnp to report about PY data! i get PY data using GET PAYROLL! one case occurs as follow: search one person(99005500) using personid number i will get result ok! all other condition not change! just in personid(pernr-pernr) condition,
-
How do I get CS3 to work in this system?
-
Unable to print or receive info from my laptop. even after entering printer email.
I sent text to my wireless printer and there has been no receipt of it or any printing. This is from my laptop. HP Photosmart Premium using windows xp home