Accessing WLAN with N80 failed

Question

Hi all,
I'm trying to let my N80 IE connect to my offices WLAN. While trying to connect I got a "WPA verification failed". Does anyone know the reason for this failure?
Abel
Background:
I have been playing around with the settings. I added a new 'Access Point' for my office, and set its 'WLAN security mode' to WPA/WPA2. Entering the 'WLAN Security sett.' I entered:
- WPA mode: EAP
- EAP plug-in settings: EAP-PEAP (deselected what was already there, and moved EAP-PEAP to the top)
- TKIP encryption: not allowed (we do not use a temporal key)
EAP-PEAP is configured as:
- User certificate: not defined
- CA certicicate: not defined (our certificate is not in the list, we use a private one)
- User name in use: from certificate
- User name: my user name as used on the office domain
- Realm in use: user configured
- Realm: the domain as used in the office
- Allow PEAPv0 .. v1: all yes
EAP-MSCAPv2 is configured as:
- User name: my user name as used on the office domain
- Prompt password: yes
- Password: the password used to log in into the office domain
A colleague checked the log file when I tried to log in, and no entry existed for a mobile trying to access the wlan.

Answer 1

WPA and EAP works great with the N80 - dont worry
I have tested and runs alot og Nokia Phones with WiFi and EAP etc.
I currently uses a N80 fw 4.0707.0.7, and there are a v5 fw also.
I sugguest you get the 4.07
You subject informs about WPA but you have set your Security mode: 802.1x
Change this to:
Security mode: WPA/WPA2
Then you should be good.
Also verify the status: hidden/public this is important
If you can see the SSID in the WLAN Wiz then its public SSID.
Try clearing the username in the certificate setup/PEAP
also try different comination of DOMAIN/USERNAME, DOMAIN\USERNAME, DOMAIN@USERNAME etc
But I would think that you do not need username in the GENERAL page under EAP-PEAP
You need username under EAP page/EAP-MSCHAPv2
I assume you have the certificate installed on the handset.
HTH