Account Dimension not included in Appshel?

Hi experts, just installed BPC NW. It is curious that is not included the account dimension in appshel.
There are others of the same type such as P_ACCT, C_ACCT and O_ACCT. Just curious because many of the papers refer to Account dimension.
Is this a correct or something happened in during the installation.
Thanks
Sergio

Got the answer, reading the doc I noted the Appshel delivered in NW is dofferent that the one on MS.
Thanks
Sergio

Similar Messages

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

Multiple selection of ACCOUNT dimension not accepted by the custom logic

Hi,
In below code I am sending "ALL" accounts and time 004.2010 to 012.2010 value from the data manager from manual selection screen. I need code to be executed for all the accounts and above mentioned time periods. But when I run the package it gives below error,
RUN_LOGIC:Unknown Dimension Name in Keyword: "BPC100001 (ACCOUNT): Failed.
Even if I put just two dimension member values for account like BPC110000 and BPC120000 it gives above error on account BPC120000. It seems that code can not accept more than one account values. Not sure reason behind the error.
Any help is appreciated.
*XDIM_MEMBERSET PROFIT_CTR=120000
*XDIM_MEMBERSET CURRENCY=LC
*XDIM_MEMBERSET DATASOURCE=ACTUALS
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET ACCOUNT=%ACCOUNT_SET%
*XDIM_MEMBERSET PLAN_CYCLE=JUL-2010
*SELECT(%CURRENT_PERIOD%, "[CURRENT]", "PROFIT_CTR", "[ID] = '120000' ")
*LOOKUP PL_PLANNING
*DIM TIME = "%CURRENT_PERIOD%"
*DIM DIM: ACCOUNT ="%ACCOUNT_SET%"
*DIM CURRENCY = "LC"
*DIM DATASOURCE = "ACTUALS"
*DIM PLAN_CYCLE ="JUL-2010"
*DIM PROFIT_CTR = "120000"
*ENDLOOKUP
*WHEN CURRENCY
*IS "LC"
*REC(EXPRESSION=LOOKUP(DIM),ACCOUNT=%ACCOUNT_SET%)
*ENDWHEN
Thanks,
Viren

Hi Gersh,
Thanks for your reply.
I am under assumption that .LGF file will be executed for all the accounts entered by the user or accounts from master data if not entered. What I mean is for every account number this logic will be implemented. So we will have as many executions of the logic as many accounts we are sending. My aim is to execute all the statements for all the accounts sent from the source.
i.e
XDIM_MEMBERSET PROFIT_CTR=120000
*XDIM_MEMBERSET CURRENCY=LC
*XDIM_MEMBERSET DATASOURCE=ACTUALS
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET ACCOUNT=%ACCOUNT_SET%
*XDIM_MEMBERSET PLAN_CYCLE=JUL-2010
I want al the below statement to be executed for all the accounts. At the point while wirting the below logic I do not know for which accounts logic should be executed that's why I set account variable in the Scope and used it in below logic.
I want REC to write one record at a time only but I assuming that REC statement will be executed as many time as many accounts are sent by the source.*
*SELECT(%CURRENT_PERIOD%, "CURRENT", "PROFIT_CTR", "ID = '120000' ")
*LOOKUP PL_PLANNING
*DIM TIME = "%CURRENT_PERIOD%"
*DIM DIM: ACCOUNT ="%ACCOUNT_SET%"
*DIM CURRENCY = "LC"
*DIM DATASOURCE = "ACTUALS"
*DIM PLAN_CYCLE ="JUL-2010"
*DIM PROFIT_CTR = "120000"
*ENDLOOKUP
*WHEN CURRENCY
*IS "LC"
*REC(EXPRESSION=LOOKUP(DIM),ACCOUNT=%ACCOUNT_SET%)
*ENDWHEN
Thanks,
Viren

Why does my account history not include my most recent product purchase?

I purchased and downloaded Photoshop Elements within the past year or so - upgraded from an earlier version, though I can't recall which version I have. In any case, my system crashed and I went online to find my most recent purchase/upgrade. However, the most recent purchase is from 2009, and I know I have a more recent purchase. Where could the more recent purchase be, and how do I access it for redownloading. Adobe won't give me the option of downloading even the older version.

Asf999 which Adobe software specifically are you looking for? I would recommend contacting our support team if you believe a download is missing.

Error: Linking primary sales accounts has not been completed

Happy New Year to all!
Pardon for the early request for your assistance guys but I really need your advice on this error message that appears whenever we try to open the A/R invoice, Delivery Receipt, or Incoming Payment.
"Linking primary sales accounts has not been completed"
Thanks in advance.
Luche

It is right that there are missing G/L accounts in the g/l account determination. From SAP Note Number: 871509, what happened to our system was some g/l accounts were removed when we created a new posting period.
Domestic Accounts Receivable
Foreign Accounts Receivable
Revenue Account
Sales Credit Account
We tried entering the g/l accounts used in the previous calendar year but the system will not update. So we created new g/l accounts under sales and accounts receivable. The system updated when we added the new sales g/l account. however, the new a/r account is not included in the list when we press the tab button.
What could be the reason why we cannot select the g/l accounts previously used in our old posting periods?
Thanks!

Send Mail from, but Not Include Mailboxes

Any way to send mail from an account, but not include that account's mailboxes in mail.app

Depends on the provider of any other accounts. For example, you can add an address to the preferences of another existing account, separated by a comma, and have that additional address available in the list of From addresses. Then if your SMTP will allow, you can send from that address.
Doesn't work with the Gmail SMTP, as it will change the From to be what is used to Authenticate the SMTP.
See:
http://support.apple.com/kb/TA23485
Another address can be set up similar to a true alias.
Ernie

Material document 4900000006 does not include an accounting document

Hi guys
I created normal sales order, delivery and and released it thr VF01.
Then I created the RE document without order reference and PGR. But while checking the accounting documents in VL02N it gives the error as follows
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
Please give me the solution
Thanks in advance
Rahul

Hi Rahul,
Can you tell me how did you resolve this error indetail or step by step? I have a same error in test client. I am doing returns with stock catergory of E while PGI and then it throws error message.
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
regards
rc gopi

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi there,
The country selected while creating the Adobe account was selected as Malaysia, so you get to see the price in RM.
^Ani

Account in Dimension not rolling up

I have an Accounts dimension and one of the accounts in only the Budget scenario does not rollup. The particular account has several children and they are not rolling up to the main account. However, this is only happening on one particular scenario.Any ideas?

I have had this happen when rearranging the outline has confused the intelligent calculation engine into think blocks are untouched, when actually they have changed bacause the set of members that make up their children has altered.Either turning off intelligent calc or clearing upper level blocks and recalcing cured it.

I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store

I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store. OS was OS X Mountain Lion 10.9 When I received it. Is it because of OS? I upgraded to OS X Mavericks right after I got it.

Today, I went to the mac store and asked the staff about above issue. Apple obviously sent me a mac air which was manufactured before October 2013 and therefore, iworks and OX Mavericks weren't installed. I have refund for around £45 to purchase iworks. However, I wasn't happy with what Apple actually did. I asked for replacement and refund the one I got and getting the new one from store so I can use mac straight away. however, the refund takes 5-7 working days. The staff on the phone told me if I have enough money I can just buy the new one in the store and get refund later. So I gave up! I was so disappointed with Apple. Even though I use the mac now, this was not the one Apple promised when I purchased online. if anyone would like to buy a mac, Please go to the actual store. DO NOT buy a mac through MAC ONLINE STORE!!! I strongly recommend! I feel like I wasted my time because the company doesn't keep its promise.

I already have a CC account through my educational institution but it did not include the Lightroom mobile. So now, apparantly, in order to get Lightroom mobile I have to purchase the PS/LR photographers package but when I went to do it I was told that I

I already have a CC account through my educational institution but it did not include the Lightroom mobile. So now, apparantly, in order to get Lightroom mobile I have to purchase the PS/LR photographers package but when I went to do it I was told that I already have a CC account. What am I to do?

I think all you have to do is go to the App Store and download Lightroom mobile onto your mobile device. You don't need another package in order to get it.

Data not Pulling after adding a 2nd Hierarchy in Account Dimension

Hi all. We had 2 hierarchies in our account dimension. We were having some performance issues, so I wanted to test reporting performance by deleting the 2nd hierarchy. I deleted the second one and now I am ready to add it back again, but I am having the toughest time. After I added the 2nd hierarchy no data is pulling through any report and I am getting evdre errors. I checked sql db and the data is there. And then if I take out the 2nd hierarchy the reports work fine. I added multiple hierarchies to dimensions before , so I am quite baffled on why this is happening.
Here's what I did. Deleted column PARENTH2 and FORMULAH2. Process. Then did some testing. And now Added columns Parenth2 and formulah2. Process.
Am I missing something here? Any suggestion will be greatly appreciated.
We have SQL 2008 Enterprise sp2 CU3. BPC 7.5 MS SP3 patch5.

I apologize for this very late response.
Thanks for your response. Yes I did process the dimension, modify dimension property and modify-->Process Application. And the second hierarchy was visible when I logged back into the application.
John, yes the second hierarchy was visible in SSAS.
This was why it was baffling to me!
So after a whole day of trying to figure this out, I sort of gave up and started working on something else. And because it was our test environment, it didnt have any effect on the users. One day later I logged back in and it was working! I took out the second hierarchy again and added it back. Processed, modified etc. I got the same result. I couldnt pull any data from the second hierarchy. I logged out, logged back in the day after and it started working. So, basically it seemed like the system needed some time (12-16 hours in this case) to adjust? I really don't know how/why this happened, maybe someone have an explanation for this?
Thank you all.

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

Account dimension logic

Hi,
I've hit an issue with the length of my calculation exceeding 255. I'd like to add functions to the mdx logic library, but can't seem to figure out the best way to edit the file. I can see that there are logic files in the adminapp folder for each application, however I'm not sure how to edit and validate it. Is there an easy way to edit the files in this folder through the BPC Administrator tool?
Kind Regards,

Great - thanks. I've actually created a copy in my LegalApp and edit it through the Script Logic section and after validating I copy back into the AdminApp Folder - possibly not the best method, but it works at the moment.
Can anyone tell me how to include a calculation in the Account Dimension that is based on another calculation? As far as I am aware the solve_order is only for across dimensions. How do you manage solve order within a dimension? I have a Tuple that I want returned and I then use that account member in another account calculation. When reviewing the results the first calculation returns the value that I expect, but it seems that at execution time the first calculations result does not exist when calculating the second calculation so I get a zero result.
Any ideas? At the moment I am creating a fairly large calculation that recalculates the tuple in the second calculation, but I'd like to avoid this.
Kind Regards,
Fiona

Account Dimension not included in Appshel?

Similar Messages

Maybe you are looking for