Account statement into optical archive ?

According to OSS note 549119 the Accountstatements SAP08 can be send directly into optical archive.
We have defined a form and added it to RFKORD10. We have created a new functionmodule copying FI_OPT_ARCHIVE_CORRESPONDENCE. I have customizied in FIBF, but I think I may have an error in there. The Functionmodule is not touched during the run of RFKORD10 and no form to be seen in archive.
Does anybody use the functionality of sending into optical archive and can give me settings within FIBF and other hints for customizing ?
Or is there a "trick" in running the RFKORD10 ?
Thank you very much in advance
Alexandra Fischer
Alexandra Fischer

It could happen when you have more than one line items for one customer in the document.
In real enviroment it is quite possible. As you have mentioned in your Production you get multiple line items for document 222222. Check out that document in FB03. You will find more than one line item for perticular customer.
You can also find it out by going to BSEG.
BELNR = 22222
GJAHR = your_year
BUKRS = your_comp_code
KOART = 'D'.
Regards,
Naimesh Patel

Similar Messages

F.27 - Periodic account statements into a file

Hi Experts!,
I have a requirement as:
when F.27( Periodic account statements) or similar T-code(if exist) is executed with a selection the output should be in file formart, NOT as print or PDF.
Please suggest.
PRK.

Account statements use correspondence types. These can only be printed. If you want to save them to a file, you'll have to write a custom report yourself.
Alternately, you can buy external software which will print to any file format (like doc, pdf etc).
Ravi.

FI -Account Statement and Aging calculation

Hi all,
I need to develop an account statement for customer open items (FI) in smartform and also need to do the aging calculation at the end of main window ....for the days like 30,60,90,120,150,and grtthan 150 which is given at selection screen....pls help in this regard
thanx
suresh

Hi,
Open Items cannot be archived in SAP even if has met Document/Account Life.
Items in BSIS, BSAS & BSID are all open items.
1) Identify all open-item managed accounts
2) Check which accounts have automatic clearing through SE16 BSIS table
3) DISCUSS and AGREE WITH THE FINANCE TEAM which of these accounts need to be open-item managed. Those that do not have to be OIM can be changed in MASS transaction
4) Block the accounts that need to be changed to non-OIM
5) Run a COPY of RFSEPA03 (of course you have to do testing first). This program changes the status to non-OIM in the master data and line item tables. You have to do this for each combination of company code and GL account. If you have a lot of combinations, I suggest creating an ABAP program to "loop" the program. The combinations can be read from a flat file. Run-time depends on the number of line items that need to be changed
6) Test the accounts for archive eligibility
7) Unblock the accounts if everything is ok
This is safer than clearing. As someone mentioned earlier, you have to be careful with clearing. The same with resetting clearing.
Also, changing an account to set OIM active is very complicated. It involves reloading archived data and could result in huge problems later on. Your totals may not match with line items. This can be accomplished through a copy of RFSEPA02. SAP suggests that you create a new account instead. Knowing this, you MUST be certain that the accounts you change to non-OIM remain OIM.
For aging Calculation:
use the function module to get the customer open items....from BAPI_AR_ACC_GETOPENITEMS Function module.... after fetching the data from the bapi,
.-> read the internal table values and move to the local internal table. and prepare the final table.
.-> as asking aging 30,60,90,120,150,and GT 150 ... declare parameters and also declare the similar fields in form interface in the smartform...
.-> And pass these parameter fields VIA smartform function module....
.-> so now ur values are availble in smartform ....just arrange as per need....
if you still not clear plz feel free to contact me......
Thanks and Regards,
Reward If Helpful

HT4314 Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loo

Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process. I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.

I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way. I haven't tried it yet, but it seems to work for others that had this issue.

Winmail.dat attachments after importing PST into online archive

Hi, we enabled the online archive feature on one of our Office365 exchange account. Later, we used the PST capture tool to import a PST file into the archive. Now after importing, the user came back saying he sees winmail.dat files as attachments. Prior
to uploading the PST to the online archive the attachments were visible normally. The PST file belongs to the same user. Its an old PST file attached to his mailbox since a long time. We then subscribed to the online archive plan for his account and used the
PST capture tool for importing the emails. To isolate the cause of the issue we tried dragging an email with an attachment from themailbox to the online archive from within Outlook. The moved email appeared correctly with attachment in his archive. We have
not tried importing the whole PST from within outlook, as the size of the PST is too large (32 GB). Could someone please help resolve the issue.
Thanks in advance.

I recommend that you post this in the Office 365 Exchange Online Forum:
http://community.office365.com/en-us/forums/158.aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Account Statement form

Hi Friends,
I have copied account statement F140_ACC_STAT_01(SAP Script) into Custom form and added a logo in it. And moved it to PRD system. In DEV system i'm getting everything perfect. But in PRD, i'm not getting the table heading in the table header. What might be missing in the PRD system, what do I need to move to PRD. Even the standard form in PRD is unable to print the table headings. Please look into this.
Thanks in advance,
Chandu.
Edited by: kishan P on Oct 11, 2010 3:51 PM

Thanks Florian. Points awarded
Can you briefly explain the functionality of the text object. Is it like a variable to which you pass text at runtime? Or does it contain static text? If yes where is the text stored an how can one view it at design time.
Mick

Program RFKORD10 - Print program: Account Statement -- Changing Key dates

Hi Experts,
Greetings, I need help in program RFKORD10 - Print program: Account Statement. I have a requirement to copy in zprogram. The main purpose is the key dates in acct statement should be based on BSEG-ZFBDT. Is there any option on how to change this in functional side. Because I read the program documentation like this
You can extend this list of selectable fields in order to meet your
requirements. To do so, you can use a repair correction to import fields
from tables BKPF and BSEG, that are not yet in table RF140W, into table
RF140WZZ. When doing so, you must take care to use the field names and
data elements from the standard tables, as the fields in table RF140WZZ
are supplied using the names from the documents.
Is there anyone know how to use this "Repair Correction"
Thanks
Please help...

Hi Sridhar
thanks for the reply, I am a developer and i figure it out on how solve this problem. I wanna know if there is anyway to solve this in functional side, without copying the standard program. Like what i've said it is indicated in the documentation that it can be change. anyway thanks again....

Query on programe RFLKORD10 for tcode FI.27 for account statement

for tcode : fi.27
If table bsid or bsad has dunning area with some specific value then i want to split account statement.
(we copied rfkord10 into zprogram and use that one.)
if anyone worked on same then please help me out.
Solution with coding or more technical explanation will be appreciated.
points will be rewarded.

on what basis u want to split ? first get the all the data into one internal table then split Internal table into 2 or 3 based on ur split conditions ?
just try , its simple , work around data only,so config .
Regards
Prabhu

Account Statement issue

Hi,
I'm having a bit of an issue with an Account Statement. Here is the scenario:
Print Program: RFKORD10
Form: Z Copy of standard F140_ACC_STAT_02
*The problem only occurs when I run the statement for past periods in Production.
In Q/A, each line item begins with a document number (BELNR) and they are all correct. However, in Production, the lines are the same except many document numbers are repeating. Example:
 In Q/A
doc number...........amount
111111...................10.00
222222...................20.00
333333...................30.00
444444...................40.00
 In Production
doc number...........amount
111111...................10.00
222222...................20.00
222222...................30.00
222222...................40.00
I have compare the form and the standard print program & variant, and they are all the same.
I have noticed that when I debug the program for a past period...
1) in Q/A: Each document number (BELNR) being passed into the sapscipt form is correct and corresponds to its amount.
2) in Prod: Amounts are being passed though correclty but the document numbers are not matching, and are repetative.
Any help would be greatly appreciated.
Thanks.
Warren

It could happen when you have more than one line items for one customer in the document.
In real enviroment it is quite possible. As you have mentioned in your Production you get multiple line items for document 222222. Check out that document in FB03. You will find more than one line item for perticular customer.
You can also find it out by going to BSEG.
BELNR = 22222
GJAHR = your_year
BUKRS = your_comp_code
KOART = 'D'.
Regards,
Naimesh Patel

I have several charges on my checking account statement that are not mind.

I have several charges on my checking account statement that are not mine.

You've checked the purchase history on your iTunes account ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases. On your iPad you can see the last 90 days purchases via http://reportaproblem.apple.com
If you don't recognise the charges, and nobody else has access to your account or devices and made them, then try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Sender email address for Customer Account Statement

Dear Experts,
Here's an issue that my colleague and I are currently facing:-
The Customer Account Statements that are sent via email in the transaction F.27 show that the sender email address is not equals the Accounting Clerk (KNB1-BUSAB) maintained in customer master data (FD03). Instead, the sender email address here is the email address of the person executing the transaction F.27.
I've looked through some programs (RFKORK00 and RFKORD10), and the variant used (SAPMA). Unfortunately, we still could not determine the root cause for this issue. What should we be looking into, and how can we resolve this issue too?
Any inputs would be much appreciated. Thanks.
Regards,
Deborah

Hi Ajay,
Thanks for your input. Really appreciate it. Would you please enlighten me further?
"The accounting clerk’s name is then printed in any correspondence with the customers or vendors."
The statement above leads me to think that consequently, the accounting clerk's email address should be the sender email address for the mail that is sent to the customer.
Also, when I hit the 'F1' key on the Accounting Clerk (in transactions F.27 or FD03), the following texts are shown:-
"Accounting clerk
Identification code for the accounting clerk.
The name of the accounting clerk defined by this identification code can be used in the payment program for correspondence and reporting (for example, open item lists)."
Again, this leads me to think that the sender email address should be the accounting clerk's email.
P/S:
The customer is saying that this should not happen, so my colleague and I are just investigating this issue further.
Regards,
Deborah

System accounting sa command error converting user accounting stats

after enabling system accounting (underlying BSD os features) with "sudo accton /var/account/acct", daily attempts to summarize and rotate data into /var/account/savacct and ...usracct fails. these files were created by /usr/sbin/sa, and later runs of /usr/sbin/sa -s -q fail with an error
"sa: converting user accounting stats: Inappropriate file type or format"
"sa: user accounting initialization failed"
is there some bug being tracked with /usr/sbin/sa or do I need to file one?

Above indeed works; file /var/account/acct begins accumulating stats and running 'sa' command shows them.
The problem is when running 'sa -s -q' daily to roll the individual records into summary count files /var/account/{sav,usr}acct; the first time creates those files and empties the .../acct file but the second and following times fail with the error lines:
sa: converting user accounting stats: Inappropriate file type or format
sa: user accounting initialization failed
After above setup steps you sent, try this:
sudo -s
/usr/sbin/sa -s -q
# observe that the files /var/account/{sav,usr}acct are newly created; now wait a bit and:
/usr/sbin/sa -s -q
# observe failure (at least, that's what I get)
(by the way Linc, thanks for all the digging you've done)

I deauthorized all my computers, but now it will not allow me to authorize my new computer. My account states that I have 0 authorized machines.

I deauthorized all my computers, but now it will not allow me to authorize my new computer. My account states that I have 0 authorized machines.

Welcome to the Apple Community.
You can't (only) de-authorise computers you no longer have access to.
Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.

FI Customer Account Statement with Debit and Credit Columns

Hi SAP Expert,
We are using form (developed from T-code: SE71) to send customer account statment for only open items this is working fine.
Now My wants customer account statement for all transactions but with debit and credit in a separate columns. is there any way we fulfill these kind of request?
if any particular logic then let me know please.
thanks in advance
b/r
prashant rane

Dear Vivek,
You logic is helpful can I apply this in SE71 form development?
Below is my customer layout format
Document # | Document Date | Reference | Debit Amt | Credit Amt |
In bottom toal Debit / credit balance figure
can I use any code/login is SE71 form or I will need to create any development report which involves user exit?
I am looking for SE71 optios first
thanks in advance
Prashant Rane

VENDOR/GL/CUSTOMER ACCOUNT STATEMENT WITH OPENING BALANCE

Can anybody tell me the tcodes in SAP for Vendor/Gl/Customer Account Statement with opening balance.
Best Regards,
Sudhanshu Dang
0124-3081015

hii
As per my knowledge no such reports for GL are there in sap.. we also had a same requirement but could not find it... we wanted reports with opening and closing balalnces...
u can go to SAP1 and check all the standard reports available. check wheather any report fulfills ur need or else go for abap reports...
Check f.42 T code for Vendor Report. and s_alr_87012172..for customer.
thanks
sejal

Account statement into optical archive ?

Similar Messages

Maybe you are looking for