Accounting Document at PGI
Hi,
The below will be the accounting document created at the time of PGI
COGS Dr
Inventory A/c Cr
My doubt is how this COGS a/c will offset.
Kindly help me out.
Pradeep.M
My doubt is how this COGS a/c will offset.
Kindly help me out.
As suggested you cannot offset--but can tell you how this will be determined..
Ans:Through your Movement type--needless to mention that will be retrieved from Your schedule line..
You can see COGS in sales order itself..See the screen shot..
For better understanding--follow the thread
Integration Point of MM-FI-SD in SAP ERP
Phanikumar
Similar Messages
-
Difference between accounting document of PGI and billing
Hi,
I want to know the basic differences between the accounting document created after PGI and accounting document generated after billing?Dear Christino,
To generate Accounting Document after PGI, following settings need to be done:
T. Code: OMS2
For your Plant and Material-Type, "Value Update" must be checked.
Also, a relevant accounting document is assigned the material document or not.
In Sales Order, we have condition tpe VPRS, which captures the standard value from material master after costing run.
When we do pgi we need to do inventory accounting & stock reduction should take place.As a result, the following posting takes place:
1. T. Code: MMBE - Stock get reduced from the plant/storage loc.
2. T. Code: MD04: Out bound del. note and the qty. set off in stock requirement list
Also check, [A/C Doc. for PGI|Account Determination for PGI document]
Whereas, After Invoice, the Accounting Document generates, as an effect:
Customer A/C gets Debited and Sales A/C gets Credited.
For more, refer: [A/c Doc.|Accounting entries and material moment types after PGI]
Best Regards,
Amit
Note: In General,
A/C Doc. Type after PGI: WL
A/C Doc. Type after PGI: RV -
MV50AFZ1 - Change Accounting Document During PGI
Using MV50AFZ1 User - Exit ,can i change accounting document during PGI.I want to change the Business Area.
If not ,please tell me which User Exit can help me in this.
Thanx,
ViruHi
business add-in LE_SHP_GOODSMOVEMENT for ur requirement
Discuss with the abaper and proceed according to ur requirement and be very specific so that it should not influence the others.
This badi during processing of PGI u can change the data related to accounting document.According to ur requirement the business area can be changed during PGI.
Edited by: sameer basha on Mar 25, 2009 7:41 AM -
Two accounting document during PGI
Hi,
We are facing the following issue:
At the time of creation of delivery, there are two accounting documents are getting generated in the system & following accounting entries are getting generated:
1. COGS a/c Dr.
To Finished Goods
2. Finished goods a/c Dr.
To Price diff.
Why are two accounting documents getting generated?
Please help me asap.
Regards
AnujHi,
Both these two documents are having same value 50000, what we did due to client requirement we created one material & did the mb1c without maintaining the price in material master, afterward we maintained it through mr21, now the moment we do the PGI system is generating two documents.
We did d MR21I in OCT2010 & doing PGI in Oct2010 as well.
Regards -
Accounting document for PGI showing amount
Dear All,
While doing PGI through VL02N from sales order stock, the accounting document that is generated for the material document has some amount. I am not clear from where that amount is coming since price is not maintained in the material master. Also no cost estimate or sales order costing has been done for that material. MR21 is showing zero.
Why the accounting document is generated and from where it is taking that amount?
Thanks in advance
regardsHi
In material master-->Accounting1 is the pricing control 'V'? And is the moving price 1.00?
This means the material is valuated based on MAP.
MAP or Moving average Price is the method of valuation normally adopted for
Bought out materials. Under this method, the system changes the average
price by considering the receipt quantity & value, adds the same to the
existing stock values (quantity & value), and calculates the moving avg
price. Only Receipts have a role in changing the same. There are some more
adjustements also which would affect this.
Regards
Madhu -
Not getting Accounting Document during PGI
Hi
IN MTO Scenerio while doing PGI iam not getting Accounting document for Material Document.Valution class for the material is 7920(Finished Goods)
Can Any body help me on this issue.Go to OMJJ, key in movement type 601 and execute. Again double click on "Account Grouping and ensure the following values are maintained
MTyp::Spl::Val.Upd:::Qty upd:::Mvt::Cns:::Val strg:::Cn:::TEKey:::Acct modif::Chk acct.***
601::::::E::::::X:::::::::::::::X:::::::::::::::::::::::::WA01:::::2::::GBB::::::::::VAX::::::::::X
601::::::E::::::X:::::::::::::::X:::::::::::::::::::::::::WA01:::::3::::PRD::::::::::PRA
601::::::E::::::X::::::::::::::::X::::::L::::::::::::::::WA01:::::2::::GBB::::::::::VAX::::::::::X
601::::::E::::::X::::::::::::::::X::::::L::::::::::::::::WA01:::::3::::PRD::::::::::PRA
601::::::E::::::X::::::::::::::::X:::::::L::::::V:::::::WA01:::::2::::GBB::::::::::VAY::::::::::X
601::::::E::::::X::::::::::::::::X:::::::L::::::V:::::::WA01:::::3::::PRD::::::::::PRA
thanks
G. Lakshmipathi -
Non-Stock Delivery - PGI Accounting Document
Hi
we are selling Non-Stock material. when invoice is being generated . Accounting document is generated ( Customer <dr> to Sales <cr>). when Delivery-PGI is posted. No Accounting document is generated .. because it is non-stock material and material document is not generated ( outbound delivery movemnt type 601) , resultant accounting document ( COGS (cost of goods sold ) <dr> to Stock <cr>) for material document is not generated.
Requirment is we want to generate Accounting document against Outbound Delivery ( COGS<dr> to Stock in Trade account<cr> )
without Stock decreaes (outbound delivery movement type 601) because it is non-stock item.
Actually it is because , at first when receive stock we put
Stock to Stock in trade ( transfering Material(valuated) to Material ( non valuated )
so, we want to post accounting document on PGI with accounting entry ( COGS to Stock in Trade ).
Thanks
thomasHi Guru Reazuddin MD
have already maped Value-Material to Non - Material . MM & FI are running good. everything is ok regarding valu-material to Non-val-material.
currnt requirment is :
Sales order : No ATP check on sales order.
Delivery Document : On Post Good Issue , it will generate a accounting document of our required accounts . like COGS (cost of goods sold ) dr >>>> to >>>> to Stock in Trade .
but not decrease \ check any stock.
when we transfer Valuated material to Non valuated material . in accounting Stock in Trade account is debited and Stock account is Credited. that is ok.
Billing Document . billing and resultant Accounting document is already generated and ok.
Regards
Thomas -
Hi,
After PGI, material document gets trigger, but in material document, when I click on "Accounting Document", system give me following message:
Material document does not include an accounting document
Do let me know any settings to create accounting document for PGI - Material document.
Thanks in advanceHi,
Please check in OMS2 for your material type, say if it is a FERT, whether the value updated is checked or not. If this is not checked the material is not valuated. As well check with your MM colleague, if a relevant accounting document( Normally WL) is assigned the material document or not.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore -
PGI Receipt Accounting Document Not Created_ Movement Type 651
Dear SAP Expert,
In my company 1st time we have cretaed a return sales scenario in SAP, I made return sales order with reference to biling document thn made delivery dcument (movement type - 651) goods kept in return storage location automatically during PGI Receipt after tht credit note is issued.
Now accounting document during PGI Receipt (movement type -651- goods return delivery) is not created.
I am not getting why system is not generating accounting document with movement type 651,kindly advice if there any configuration is missing in system.
Account grouping data for Mvt type 651 is empty, i want to know how to enter data into that so that accounting entry could be generated.
Looking forward for your quick response on the same.
Warm Regards
ParulHai ,
In a sales return process
Invoice-> Return sales order ->PGR->Credit for return
Once the material comes to stock " RETURNS"
Proceed the following steps
1. Reversal of Excise Invoice u2013 J1IH (additional Excise)
Create the excise JV (if it is excisable material)
2. Transfer of Returned Stock to Restricted/Quality Stock u2013 MIGO (Movement type - 457)
Now the material document create the Accounting entries.
Hope return process get completed and details will be helpful.
Regards,
Mani -
User Exit to change accounting document
Hi all,
Is there any user-exit in which we can change the accounting document data before it is created.
I want a user exit which can update the accounting document during PGI for a delivery
I was able to find the one in ehich we can make chages to the material document and iam sure that there should be one by which we can change the finance document
Kindly help, this issue is urgent for me
Regards
VarunCheck OSS Note# 415716 "User exits in delivery processing"
There are several User exits to choose from, this document describes tham all. -
POSTING DATE in Accounting Document
Hi All,
I am facing the problem with POSTING DATE in Accounting Document.
Sales Order 25/10/2008
Delivery & PGI 29/10/2008
Billing Doc 05/11/2008
Accounting Doc Date 05/11/2008.
The system picks the PGI Date 29/10/2008 as POSTING Date of Accounting document. It should be 05/11/08.
Please let me know the reason.
Thanks & Regards,
Hemant PatilHi
if you are looking accounting document of PGI it must be on 29th because material movement have done on 29th through PGI (it is accounting document for material movement not for invoicing)
if helpful then give points -
User Exit or Enhancement for Material accounting document in VL02N at PGI
Hi,
I have 2 requirement at the time of PGI of Delivery.
1) Currently there are 2 accounting document getting created for 2 countries. i want to restrict acc. document creation for one company code.
2) I want to change the GL account in the accounting document while creation.
Could you please help me in finding any user exit or enhancement or BAdi or BTE which can resolve th eissue?
Thanks,Hi,
GL account can be changed through the badi AC_DOCUMENT.
Use the the method CHANGE_INITIAL to change the GL account..
Regards
Aromal R -
Sales group not filled form sales order header in PGI accounting Document
Hi all,
we are creating a sales order . when sold to and ship to is entered the sales group at the header level is fetched from the customer master automatically.
Now after changing the sales group,different from customer master,the sales order got saved as usual with a warning mesaage 'sales group is diiferent from customer master'.
After doing PGI and billing , the sales group fetched in billing document is same as that of sales order header,but when good issue delievry document is displayed , in accounting document of the material document (ie. in FB03),the sales group in profit segment tab is getting filled from customer master.
Now the requirement is to fetch the sales group from sales order header instead of customer master.hi
check your copy control settings and change if required -
Accounting document not created for PGI
Dear All,
I have done PGI for Delivery document.
The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
While PGI material document has been created but accounting document has not created.
Waiting for your valuable suggestion
Thanks & Regards,
RatishAccounting / Materil Document in PGI:
These settings are pre configured by the SAP, Accounting document is generated based on the following combination-
Valuation Class in the Material Master + Account Modifier + Transaction Event = GL Account
These account modifier is assigned to Movement type settings in Transaction OBYC of Accounting and these Account modifier is determined based on the Movement type availabe in Delivery.
Material Document is generated based on the number range assigned on the combination of Documen type(WL) + Transaction code. -
Accounting Document Not Generating - PGI - 601 (E)
Hi all,
With Make to Order Scenario,with respect to the sale order, Required stock has been posted by PP,but while SD Process Delivery in PGI with Movement type 601 (E) Special Stock...Accounting Document is not generating,now i want to know whether this problem related to PP / SD / FI / MM.
With Make to Stock Scenario in SD process Delivery in PGI with Movement type 601 Accounting Document has generated but in Make to order Scenarion this is not happening.
Awaiting for an positive reply.
Regards,
Kumar.SDear,
In MTO scenario, the mvt type for PGI is 601 E. Assignment of 601 mvt. type is done on Schedule line category, VOV6 i.e, CP and special indicator E comes from the requirement class.
If the accounting doc. is not getting generated, pls. co-ordinate with your MM Consultant for settings of mvt. type 601 in OMJJ
Please refer this link,
Re: Accounting Document for 101E & 601E movement type
Regards,
R.Brahmankar
Maybe you are looking for
-
Recorded for outbound processing in SXMB_MONI???
Hi XI friends, in my file to abap proxy, in sxmb_moni i am getting message like "recorded for outbound processing" and Q status is stopped. please help me. thanks and regards ram
-
Palm profile contacts, calendar etc lost
My Palm Pre (running WebOS 1.4.5) recently became faulty. O2 replaced it with a refurbished Pre. I'd forgotten my password for my Palm profile, so I was sent an email with a link to reset the password, which I did. When entering my new password (to u
-
Hi Gurus, I have created a PLD that is working fine but I want to take print of that PLD twice in same paper (A4 Size). Please guide if it is possible . (Though the size of PLD is not more than half of A4 size Page and we need duplicate copy of the
-
Just getting started... When dragging a part of my .mov file (marked with I and O) to my canvas, I get " unrendered". What am I doing wrong?
-
ICloud Verification - Help Please
I can't verify my iCloud account because the email wasn't ever received. How do I get another sent to me?