Acrobat workspaces - published folios not viewable

Hi
I normally use acrobat workspaces to view the size of DPS articles that i create and publish.
In the past i have just had to log in to the workspaces paneln and any DPS folios that i have uploaded are viewable in the lefthand panel under the heading Shared Workspaces.
I logged in today and my most recently published folios are not visable in this panel.
Is there something that i need to do to get the folios to show up here? They have always been automatically available to view here without me needing to do anything and i don't think that i did anything differently from my normal DPS publishing procedure.
Thanks,
Ben.

That's correct. DPS servers are now independent of acrobat.com, so the folios and articles no longer appear in acrobat.com workspaces. Displaying the article size in the Folio Producer is on the roadmap. Until it's implemented, one workaround is to view the size of the .folio file for each article in the temporary folder. (It helps to create a shortcut/alias for the temp folder.)
On a Mac, it's located in <username> > Library > Preferences > StageManager.#### > Local Store > dmp. (With the newest Mac OS versions, hold down Option and choose Go > Library.)
On a PC, the temp folder is located in [username] > AppData > Roaming > StageManager.#### > Local Store > dmp.

Similar Messages

IWeb '08 - "Publishes" But Not Viewable without MobileMe Login?

I'm new to iWeb. I created a simple site with a few pages, and then "Published All" to MobileMe. When I view the site, it looks fine. When others try, they get the "Are you looking for something on MobileMe?" page. I have looked to be sure that the site is not "private".
I've been reading and reading and can't find a solution. Is there a trick to this?

I can move the question to the other forum. I was reading around so much I got a bit lost on where I was. I looked in the help guide about privacy settings and went to the "site inspector" to double check.
The site is: http://web.me.com/cerina1/CDMHS
Sorry.

Video not viewable when published

I have tried posting a video to the web. I have used the podcast pages and the movie page. Neither one works. I called apple, and the guy that I talked to said that it might be a size issue. So, I tried posting a very small version of the video, and it still was not viewable once published.
What appears when I click on the page is a transparent quicktime "Q" with a question mark over it. When I tried publishing the video as a podcast the rss that iweb assigned was the address. Can someone tell me how to fix this?

What format is the video? I have uploaded a 50MB (just to test I could do it) video to iweb pages exported from imovie '06 and also used Quicktime to compress for web. Visual Hub is also good for compressing videos for the web.

Folio producer not updating folios on app after publishing folios

Folio producer not updating folios on app after publishing folios, before May updates it used to update my folios right away, it's been 2 days and my folios has not been published or updated. please help

yes I did, i even unpublished the folios adn then published them again, i made them public when publishing and it still doesn't make the updates on the app, on the folio producer it shows the latest files and that the updates request was sucessfull. But istill no updtes on app,
please help

I do not have Acrobat Workspaces. Why did I receive the email?

I do not have, use or otherwise have any need for Acrobat Workspaces. To my knowledge, I never owned Acrobat. Why did I get this email? Is Adobe having security problems again?

Program must have been written by the same people who wrote Dartmouth's new email system. I had the same problem building a regional list for my Class today. Thanks for letting us know.
Sam Ostrow
Sam David Photography
www.samdavidphotography.com
Studio: *** *** ****
Mobile: *** *** ****
Maine: *** *** ****

Captivate Shared Reviews are based on Acrobat workspaces, right?

Since the very latest Captivate 7 publishes its shared reviews to Acrobat workspaces - and that is really the most effective way to use them, how will this feature be affected?

I think the Captivate team was taken by surprise as well. Adobe can be like that. Too big to even know what is going on with their products (which aren't a part of Creative Cloud) - otherwise, why would the Captivate team not have sent a message to their users? Captivate even has a built-in window for "News about Captivate", so it isn't like they don't have a mechanism for that.
Of all the features in Acrobat.com, shared reviews was the only one that really had much (unique) value, and it is a critical functionality when it comes to producing elearning. It is also one of the things which brought value to Captivate. I hope the team there comes up with a solution which corrects this significant oversight.
Ah, Adobe. What that we rely on shall you kill off next?

BI Publisher Report not Generating any Output in the Excel SHeet

We have a CUstom BI PUblisher Report .When we run it ,it completes normally but there is no data in the Excel Sheet generated .It shows NO DATA FOUND .But when i run the Query seperately i do get some data . Don't know why it is not viewable in the Excel sheet ,it was working fine few days back .
Please advice .
Thanks

do you use some profile in your script?
We recently upgraded the database from 10g to11g .
after that report has no data ?
is it ebs or obiee?

PDF files created in Pages have text not viewable on PC

I have created a large (7 MB) program for a large conference in Pages. In order to have it printed, I converted it to a PDF. For some reason, some of the text on some pages is not viewable on PCs using Acrobat Pro or Reader - it should be black and is showing as white text.
What could be the problem? This does not happen on all PCs, only some. Has anyone experienced this in the past and is there a solution? Of course, my deadline is rapidly approaching...the conference starts on the 26th. Any help is greatly appreciated.
Thanks!
Eden

I am having the same problem when exporting to PDF AND Word files. My document looks great in Pages and in Preview, but half of my text is converted to white when viewed in Acrobat Reader or Word. This is very FRUSTRATING!! I have a deadline approaching, too, and am collaborating with another shop that works on PC's. Any ideas for how to fix this issue are very welcome!

Published Album not showing up in actual gallery

I have been attempting to publish an event to my web gallery. The event for is correctly listed in the iphoto 2008 Web gallery drop down listing, however when I go to the actual gallery on the web this particular event is not viewable.
Should I delete the event from my web gallery listing and then republish?

mggt:
Yes, I'd delete it and republish. However, another user reported that each time he posted a new gallery it would delete the previous one. You may be having that problem also. If so contact Apple's phone support - don't remember the number.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Pictures not viewable in Firefox

Added another page to my website last night, when I came to work this morning to check out the pictures, I realized that they are not viewable using my firefox browser, safari and IE work fine, any ideas? I had a similar problem when the .me changeover first happened, but all has been well for the past month or so. Here is the page:
http://web.me.com/gunkel04/Site1/New_Jeep.html
Thanks...
Greg

Try this first:
Check that you have the latest version of iWeb (2.0.4) and also download the latest Software Update for you Mac OSX through Apple menu / Software Update. Then open iWeb and make a minor change to all the pages, like moving an item one pixel and then do a Publish All to MobileMe. You can also delete your entire site from MobileMe through iDisk first before doing the Publish All in iWeb. That should jump start the photos.
Make sure you backup your iWeb file first before doing anything! Having a backup of your site is always good.
It the above doesn't help you see below.
This post should help you as well as the next one:
http://discussions.apple.com/thread.jspa?threadID=1563823
http://discussions.apple.com/thread.jspa?threadID=1568157
You can check my working photo galleries here:
http://www.powerofkarate.com/Karate/Photos/Photos.html
Let us know if it helped you.

Acrobat 5.05 Distiller not Producing .pdf Files

When I first purchased Acrobat 5.05 and installed it, to produce a .pdf file from an application, I printed the file from the application choosing Acrobat Distiller as the printer. This prompted for a file name and location. When the OK button was clicked, Acrobat 5.05 launched, and the .pdf file appeared, and was able to be saved. No other steps were needed.
Now when I attempt to do this, the application indicates that it is printing, but Acrobat 5.05 does not launch, and no .pdf file is produced in any folder.
Re installing Acrobat 5.05 does not correct the problem.
What needs to be done, to make this version of acrobat distiller operate as it originally operated?

Normally it is only needed if you are requesting a PS file that may be sent to someone else and they do not have the fonts OR if you are printing another PDF that had embedded fonts that you do not have one your system. Otherwise, Acrobat will go to find the fonts on your system as per the distiller font list.
The print to file is the most fundamental PDF creation process in AA 5. All of the other options build on it. The repeating the process, but unchecking the print-to-file button. In that case a PS file will be created by the print driver (directed to the Adobe PDF port or such -- I would have to go to my other machine to check the name for sure, but should be obvious unless it is missing) and then AcroTray is supposed to recognize that the file exists and then run distiller in the background. PDF Maker is just a front end processor for the Acrobat Distiller printer. Note that the name has since been changed since folks got the print driver confused with the program Distiller. They did the same change in name to Reader since folks keep thinking they had Acrobat when they only had the Reader. (At least that is my take on their reasons that I have not really seen.)
AcroTray is found in the Distiller folder. It should be in the startup folder of Win XP, listed as Acrobat Assistant. If you look at the running processes with ctrl-alt-del, it should be listed (just click on the program columns to get an alphabetic list). If it is not running, then start it. If it is running and you are having problems, then try ending it and then restarting it from the Distiller folder (just double click on the program).
Also, be aware that unless you change a preference in Distiller, the settings you pick in the Acrobat Distiller printer properties will over ride those of Distiller for the most part. And any changes you make in the printer properties from within a program will over ride the default printer properties, but will not be carried over to the next use of the program -- the defaults will again be loaded. So if you want a particular default setting, use the Start>Printers>Acrobat Distiller (right click for properties) to set the default properties. I never use the standard job settings for instance, but always use something like the press or print settings that embed all fonts. I reality I use a job settings created by a publisher.
So all I am trying to step you through are the basic trouble shooting steps that are necessary to get your system working. Finding where the problem is becomes the first step. We now know that you can print-to-file and produce a PDF with Distiller. Actually, I loaded AA5 on a Win7 Starter system and was able to create PDFs using this process. The AcroTray from AA5 does not work in Win7. Actually, for Win7, I just tried it by changing the port to File and so I don't even have to check the print-to-file button. That was really more of a test to see what broke, and I was surprised that it even installed on the 32-bit netbook. My guess is it may not work at all on a 64-bit system. However, on XP, your AA5 should work fine once we trace down the culprit.

My folio not loading in Multi-Folio App

My folio not loading in Multi-Folio App, i made the app and download te ipa file, i can see the app in my ipad but not the folio, my folio looks published as free and public, can u help me?

Thanks a lot!! i put the same ID and generate another user on my account, a new email account for the title ID and it works! regards!

Error when updating published folio

Preparing to submit app for iTunes approval and testing using TestFlight. All was going well until I tried to update content in an iPhone rendition. One article needed an edit, the edit was made and folio was shared with application account. I copied the corrected article to the published folio and deleted the old article. It's published as Public and Retail. Folio Name and Product ID were not changed.
After updating the published folio, the viewer shows there is an update available for that folio. But when tapping to download the update, I receive an error that says "the file is missing or is invalid".
Please help if you can...
Thanks

The in-app and Product ID match. I re-published the folio and now I can download it in the viewer app in TestFlight, but the updated article is not there. I selected Update folio again, but the old article is appearing in the viewer and there is now notification of an update now. Is this an issue with caching in TestFlight mode?

I cannot access Acrobat Workspace

I'm trying to distribute a form, but the workspace link(s) that Acrobat is creating are not working. Here is an example: https://workspaces.acrobat.com/?i=JaN824M18tqojx-yDMFe7Q
Even when I go to Acrobat > Workspaces, I get the IE cannot display the webage error message. Please help. Thanks.

Workspaces requires the Flash Player browser plugin. The link you mention does work but of course you cannot fill in a PDF form within the browser, it can only be downloaded.

Updating already published folio

Hello.
I am not very sure, how to update already published folios. Yes, i know, there is a update button DPS Folio Produser
But, if i upload folio to my user account, then share it to application acount for distribution? In application account i copy my already shared folio and publish it.
After updating content in my account the content of the updated folio is not transferred to the published folio in application account.
Must i copy the folio again and publish it again? And my clients must download that folio again?
I tried it and somehow my clients began to see 2 copies of the magazine in distribution app.
Ants

iGeo suggestion is the way to go in your case.
1. Have your freelancer share the corrected folio with your(application account)
2. Open the shared folio
3. "Copy to" the corrected article into your live folio
4. Delete the outdated article from the live folio
5. Re-arrange the articles to order
6. Hit the "Update" button on your folio producer dashboard
You should now see the changes in your live folio

Acrobat workspaces - published folios not viewable

Similar Messages

Maybe you are looking for