Activation issues with dual Adobe ID's

I have one adobe id based in the US Adobe store that holds all my point product licenses.
I was forced due to living in New Zealand to have my cloud subscription via the NZ store and had to have a new id.
All is fine except every time I open one of my point products - on next opening a cloud product im forced to reactivate ( it tells me im running in trial mode and i have to click on license this product)
This is easy to do but quite frustrating - I am in the position where i have to open cs5 and earlier versions to help students and customers so its happening to me daily or more often and that seems unreasonable.
Is there anything that can be done to fix this situation???

OK, thanks for the clarification.
I was wondering if this might be related to what you are experencing
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
Is the lanuage preference set to English (International)?
-Dave

Similar Messages

Activation issue with new Adobe form in subsequent systems

Hi All,
I'm facing an strange issue in activating Adobe form.
The new Adobe form is copied from an existing form and assigned to a new output type of PO.
After tested successfully in Dev, we transport it to Q environment and other subsequent systems
But we will always get PO updating termincation error in Q and other systems firstly.
We go to SFP transaction and regenerated the Form there once, only after that it works perfectly and no termination error any more.
I'm not sure if I missed any step to activate the Adobe form as this is the 1st time I'm working on a new Adobe form.
I did activate the Adobe interface and form before releasing and TR consistency check was also carried.
Please let me kow if you faced the similar issue and what's the possible cause?
Thanks for your inputs.
Regards
Vindy

not really, someone else mentioned that it could be done and they said they saw it before. I've been beating myself up for a while trying to figure out how to get it to happen. Is there an easy way to get the content of the pdf form into an email body with plain text when pressing a submit by email button?
Such as...
<label name>: <txtfield content>
First name: <txtfield content>
...etc..

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro ins

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?

It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.

Having issue with update Adobe 11.0.06. Error 1603.

Having issue with update Adobe 11.0.06. Error 1603.

You should have gotten this information with the error: "Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates. See also Error 1603 | Install | CS3, CS4 products." Also, be sure you log in as the administrator and disable anti-virus.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Booklet printing issue with PC Adobe X Reader

I see that my issue was posted on April 18 by MA14urj. However, since it was never answered, I am going to post it again.
With Adobe Reader 9 - all versions - booklet printing worked great. With PC Adobe Reader X, if you try to print more than one copy, they all combine into one stapled copy. (As I type this, I am going back and forth, and printing 21 copies of a 38 page booket ONE AT A TIME).
As MA14urj wrote, "With Adobe Reader 9.4 it was working fine, since Update on 10.0 / 10.0.1 we have the error on 2 or more copys of a document they are stapled togehter, so they are useless!"
Someone please help us! Is there a solution? Is Apple working on this issue?
Thank you.

Adobe offers paid support for Reader. It used to be $39 per issue.
Reader will not change paper sizes automatically. It offers to fit the page printed to any printed sheet size. This option is fits most people's needs since they do not have two trays. Brother should offer the ability to change the paper size and tray within their printer driver.

Known issues with the Adobe CreatePDF Printer

Hi, everyone.
Hopefully if you're a subscriber to the CreatePDF service, you've discovered an incredible feature called the Adobe CreatePDF Printer. It allows you to convert ANY printable file type to PDF. You can learn more about it here. Instructions on how to set up the printer are here. It's available on Windows only.
However, I did want to highlight that there are a couple of known issues with the CreatePDF Printer which we have work-arounds for.
If you're having issues installing the CreatePDF Printer, please read this article: http://kb2.adobe.com/cps/904/cpsid_90492.html
If you've installed the CreatePDF Printer but the printer is not working (on Windows 7 SP1), please read this article: http://kb2.adobe.com/cps/901/cpsid_90130.html
Finally, if your CreatePDF Printer is appearing as "offline" in your printer list, please try this work-around: http://forums.adobe.com/message/4183649#4183649
If you encounter any additional issues with the CreatePDF Printer, please don't hesitate to let us know via this forum.
Thanks, and happy PDF-ing.
Dave, Adobe

Vertically installed super slim DVD drives are not as reliable as a plain desktop burner. I've had one fail in two of three iMacs and have always had an external which I use most of the time. Other than that, the brand new iMacs do not have a Super Drive, so if that is what you are inquiring about, the point is moot. You need to buy an external anyway. As far as speed, I have never used a burner at high speed - unless you have a professional model, you can easily get burn errors when burning at a fast speed; sometimes consumer models do well burning with high speeds , other times not.

Does anyone know of any licensing issues with various Adobe shapes?

I want to use one of the Adobe shapes available in the shape palette ( paw print) for a commercial product, printing it as part of a decorative design on a product. Has anyone heard of any licensing issues with these custom shapes?

Never heard of any issues, and I’d be stunned speechless (if you know me, that means very stunned) if there were an issue. They are provided with the program to add value and allow you to create artwork, much of which is expected to be commercial. Go for it and don’t sweat.

Issues with downloading Adobe Flash Player. Help!

I just updated OS X Mountain Lion and I'm having issues with Adobe Flash Player. I have tried downloading it several times but it hasn't taken and won't let me view any videos. How can I get it to work?

Welcome to Apple Communities
Uninstall > http://fpdownload.macromedia.com/get/flashplayer/current/support/uninstall_flash _player_osx.dmg Install again > http://get.adobe.com/flashplayer/otherversions

DVD Playback Issues with Dual Layer media

I have been using DVDSP for years now, and have rarely had any issues with burning my final projects to DVD. Any playback issues have usually been issues with players and +or-R media.
I have recently upgraded to a MacPro, and have been really stoked about being able to burn to Dual Layer media. My previous G5 didn't have a DL burner.
I have a large project that fills most the disk, and everything seems great in the software, and when playing the media files on the computer. But when I burn to disk, I have huge issues with playback on different DVD players, computers, etc. I have stuttering with menu's, freezing, and stuttering with playback of video.
I read that the issue could be because of the speed I'm burning at in DVDSP, so I saved as a disk image, and used disk utility to burn at a 4x speed. This seemed to help, but when I got to the end of the movie I had huge issues with stuttering/playback quality. So I burned another copy from the same disk image, and it wouldn't even play in my DVD player.
When I open the Video_TS folder from the DVDSP Build, and play right off my hard drive in the DVD software player, I don't have any of these issues.
So I'm guessing my problem is either my DVD media I'm using, or the burners on this new computer. I've burned DVD's on both burners (yes I have 2) and I still have the same problems.
I am using Memorex DVD+R DL and they are 8x.
Can anyone offer me some advice here. I really wish I could just hit burn and have a disk work. DL media isn't all that cheap and I don't know how many coasters I can make and keep my sanity.

I used compressor and I used the DVD: Best Quality 90 Minutes setting. The bit rate is avg 6.2 and maximum 7.7. And yes I used ac3 audio.
When you say lowest speeds possible... shouldn't a burner that says it burns at a speed work at that speed? I'm cool with burning at a lower speed to get this thing to work, but why have a burner that burns DVD DL at 8x speed, when it doesn't work? Shouldn't it work? Why is it that it won't work?
If I get Verbatim DVD+R DL, can I burn at 8x speed with those?
When I burn in disk utility I used the "varify burned data" and everything checks out ok. So why do I have this issue. Just curious.

Issue with installing Adobe Flash Player on my Mac OS X Yosemite 10.10.2

Hi I'm having problems with installing adobe flash player on my mac pro. I am able to download file but can't instal it riches 30% and stuck. Can anyone help me solve this problem please???

Could you first try the steps outlined in this FAQ:
How to perform a "clean install" of Flash Player in Mac OS X
If that doesn't help, please try this installer:
PKG Installer

Has anyone else had an issue with the "Adobe Software License Agreement" box coming up on their screen every time you try to use a product?

This is what comes up every time I use a Creative Cloud product. When I click on "Accept" nothing happens so I end up having to just click "Quit".

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I am facing activation issues with Lightroom 4

hi, do you, dear Adobe people really only own ONE working computer? i have a laptop for going out and a MacPro for heavy lifting. please allow me to buy one licence as i'm only using it one at a time...

That has been done. He said that Adobe was not in a globalised world. that me having a USA address, being stationed in China, through an Australian university and having an Australian credit card (those banks make profits rather then sending the world in financial chaos) was bewildering to Adobe who lives in a very 19th century world were each country should be treated differently, despite that software coming off the same servers, having the same call centre, and in my case, the same language. So I set up my account with my USA address and used my credit card and Australian university while living in China to buy Lightroom. The transaction went through. This is the email I received.
Dear garrie magurie,
Thank you for your purchase of downloadable Adobe products.
For your records, we have included your serial numbers below.
Adobe Photoshop Lightroom 4 (Mac/Win,English)
1160-4004-XXXX-0643-XXXX-XXXX
Download Instructions:
1. Login into Your Account with the Adobe ID: [email protected]
* http://www.adobe.com/go/ols_ww_login/
2. In the My Orders page, locate order #AD004985353 with the date April 7, 2012, and expand the order to view the details.
3. Start your download by clicking on the 'Download' button.
4. After you have completed the download process, your serial number will be displayed in the download center.
5. You can log back into 'My Adobe' in the future to re-download your product or retrieve your serial number. Please refer to the download policy for terms and conditions.
http://www.adobe.com/go/ols_en_download_policy
For help with downloading and installing your product, visit the Download and Installation Support center:
* http://www.adobe.com/go/ols_ww_download_instructions
Best Regards,
The Adobe Store Team
Please note:
1. no where does it object to the mixed countries of my transaction.
2. no where does it ask for me to supply my student ID (past the process to buy this software). ie no 14 days to register a student card as stated by service.
So one, I would like to install this software to fully working on my MacPro, so that i can continue my study, thank so.
two i would buy an adobe subscription for the USA address on my Australian credit card at the price advertised when i started trying.
Three Adobe catch up to the globalised world, it is so much hassle to buy your software, it should be a easy, fair and just (like the USA properganda movies say it is, oh China propaganda has nothing on our good old US of A...).
Thank you
garrie

Incompatibility issues with Dual Layer DVD+R help?

I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
Thanks SO MUCH for any responses. This process has been soul-crushing.

>The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
Support in older players is at best sketchy.
If the disc is working properly in at least one player, then you should be good to go.
Replication will produce a different type of disc. One that
i will
play properly.
Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
What you really need is a player that you
i know
plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
You will need to get these
i replicated
and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

Installing Adobe Acrobat 7 to get around activation issue with my CD but...

Now after downloading and installing it is asking for my serial number which I provide and it will not accept. Now what?

What system? any chance your serial is an upgrade or a special promotion from a bundle?
Mylenium

Activation issues with dual Adobe ID's

Similar Messages

Maybe you are looking for