OPM Actual Costing (PMAC) not including AP Invoice transactions

Hi,
OPM Actual Costing (PMAC) not including AP Invoice transactions in 12.1.3 version. We have set profile GMF:Include Receipts in Actual Cost = 0, GMF:Include Invoices in Actual Cost = 1 still AP Invoice not included in OPM Actual costing.
Observed, Invoices which has IPV are shown as in Actual transaction view with line source as "Invoice Price Variance". I was looking for a line source with "AP invoice" and "IPV"(if exisits) in Actual transaction view screen.
Thanks,
Solomon.

Hi,
did you run the extract AP charges request ?
thanks .
Ahmad.

Similar Messages

  • OPM Actual Cost Process not selecting all Inventory Movements

    We have completed 27 Move Immediate transactions (TRNI) but only 2 of the transactions appear in the Actual Cost Transactions View so our PMAC cost is not as expected. Those 2 transactions were in Sept '09. All other transactions happened in Apr, May, Jun of 2009. On July 7 the profile option "GMF: Include Inventory Movements in Actual Cost" was changed to YES. Does this mean that the Actual Cost Process will not pick up those move immediate transactions that occured before July 2009?
    Robert Lovell

    Hi Robert
    Yes...exactly, since you have closed all the said periods before u run your Actual cost process, and later you changed your profile option.
    If you want, that all the transactions (TRNI) to be in Actual process as View, Functionally (I mean from front end) it is not possible now, but u can make use of PL/SQL Language by means of technical help then you can open those periods from back end and then do the set up from front end, and then you may able to view those transactions.
    It is purely technical help and require some gud stuff to do this.
    Regards
    Raj

  • Actual cost are not updating in prodcutcost collectors ( KKF6N) - Variances

    Hi SAP's
    We are facing the problem with the Variance calculation for product cost collectors.
    The issue is When we are calulating the Variances for prodcut cost collectors the actual costs are not ( For few materials of BOM) updating.
    Because of these the variances are showing high.....If I settele this variances to COPA, my copa report is will be going wrong.....
    Please help me to comeout of this problem.
    Thanks in Advance
    PrasadReddyS
    FICO Consulatnt

    Hi Anand
    Please add the budget profile at Plant maintenance order level no need to add any substitution rule
    budget should also be control at order level
    Thanks
    trinath 

  • Expense allocation calculations on OPM Actual costing.

    Can any body provide a Document on Expense allocation calculation on OPM Actual Costing please.
    Regards
    Raj

    Jayabalan,
    Sorry for delay. I have to check the other setups too to determine the cause of this error.
    Please check if this item is transacted in prior period (Mar 2006) and ic_perd_bal table has any record for this item-whse.
    Else we have to involve Oracle Support through TAR to verify the log file and other setups to determine the cause of this error. They may need the Actual Cost Process log file with debug level 3 (profile: "GMF: Debug Flag")
    You can contact me through mail [email protected] if you want any help in debugging more in this.
    Thanks,
    Dinesh

  • JDE World / Actual Costed BOM ( not standard ) Manufacturing

    Hello,
    I was wondering if any of you knew if JDE had the capability to report an actual costed BOM.
    We are running LOT control on 90% of our products and would like to report an actual cost for each LOT / work order.
    This would include,
    Actual labour collected through Kronos
    Actual price paid for a piece part (we may have paid premium on a particular lot)
    This would then give me the actual cost of a unit which I can then compare against price sold and report profit and loss at part number work order level.
    Your help is much appreciated.
    Thanks,
    Dan

    Dear Janos Noll ,
    Can you please share with me, what goes wrong for SAP B1 community members if SAP provides this feature in B1 ?
    I believe SAP is intrested in SAP B1 Product Ehanancement, that is why SAP has created this forum upfront.
    Personally I believe that there is far gap between quality of SAP product and Add-On developed by other agencies.
    When Customer is spending money on SAP brand name they must receive the same quality all to gather.
    Hope you understand and support me on this DRQ. I strongly believe it is of utmost importance for SAP B1 community members that includes, Partners,Consultants,Customer and last but not the least SAP.
    Thanking you in advance,
    Samir Gandhi

  • Profit Center Report not include the Invoices entry

    Hi Expert,
    I want the report of my profit center which will show profit centre details including the dimension.
    I have run the following report but not fulfill the requirements
    1.The u201CProfit centre reportu201D in this report only u201CJEu201D is comes in report & Invoices post for the u201CProfit centre(Dimension1, Dimension2,Dimension3) u201Cis not included in that report.
    2.The u201CGeneral ledgeru201D report it will give the details of invoices but ,it is not showing the  Dim1,Dim2,Dim3 in the available column of report.
    Plese help me on this.Sap version 8.8 patch 15.

    Hi,
    You can create your own report by Crystal Report or query report.
    Thanks,
    Gordon

  • Actual cost  is not  seen in the  variance calculation KKS2

    Hi
    I   did  variance calculation of  a Production order  ( after  telco)  .  Its a co - product.   The  target cost , actual cost and  allocated cost   fields are present  after  execution.   Now  the  actual cost  field is   blank  and  so   the  variance is not  correct.
    Pl  advise on  why  the  actual cost field is not  populated with  the cost.
    Thanks
    kamala

    Hi
    KOB1  shows the actual cost .  I do  TECO  for the PO and  calculate  Variance for co-product material,  and  the  actual cost is showing at  zero.  But   then i  do  settlement  KO88,  and  the   variance amount  gets posted CORRECTLY and FI document is generated.
    So  why is the  ACTUAL COST  field   ' ZERO'    in  KKS2,  but    KO88   settlement  shows the  variance amount.
    It  there some different logic  to  do variance calculation  for   PO   involving  main product  which have  co-products  in it.
    Thanks for  any inputs
    kamala

  • Actual Costs are not captured in Production Order

    Hi Experts,
    I'm not able to see the actual costs for a production order. We made the cost estimate for a material for this month. We created the production order and partial confirmation also done. In production order i'm able to see the target cost only. I'm not able to see the actual cost for the production order after confirmation.
    In routing costing relevancy tick mark is available and in work center i maintained the cost center and activity types also.
    Can you please share anything is missed for getting actual cost for a production order.
    Naren

    dear friend,
    you would finally confrim order (set CNF status) and try again.
    also chack out you master data:
    -material master (possible Acc1-2 and Cost1-2)
    -work center (say,did you set a valid Cost center there?), are activities set up? usage? validity?..
    -routing (header data and control key at item level)
    check out your control key against the 'Cnf' and 'PrtCnf' checkboxes...
    good luck!

  • Actual Cost is not updating in Production Order & WIP

    Dear All,
    I have issue in production order and Work in Process not getting Target Actual cost in costing view CO03 & KKAY.
    Is there any settings or transaction missed out? Please guide me how to sovle the issue.
    Thanks & Regards,
    Venkat.

    Dear,
    Please check,
    For Target cost
    1. Your std cost must be released before Goods Receipt
    2. There must be goods receipt posted on the prod order
    3. You must calculate variances in KKS1/2
    For Actual Cost
    1. Post Goods receipt and Goods issues
    2. See if any mat movements are pending in COGI
    3. Ensure that operation is confirmed in PP and no entry is lying in COFC
    Also in CO03GotoCost-Analysis--Here change the lay out and check it.
    Regards,
    R.Brahmankar

  • Actual cost are not posted

    Hi all,
             I am  doing Purchase Order against project for service,assigning WBS Element in it,
    and doing service entry sheet against that P.O.
    But I am not getting plan & actual cost reflected in Project builder & reports.
    Is there any setting for getting Plan & Actual cost ?

    Have you accepted the service entry done? Actual Costs wouldn't appear unless you accept the service entry.
    If you haven't done planning (T Codes CJR2 or CJ40), Plan costs wouldn't appear on the WBS.
    You should be able to see commitments on the reports if you have the configuration settings for commitments.
    Regards
    Sreenivas

  • Actual cost is not appearing in CJE0 reports.

    Dear All,
    I am facing a problem that when i am running CJE0 t-code for Budgut vs Actual then actual cost incurred on WBS is not showing in reports.
    After settlement cost is showing ' 0' in reports pls. help.
    Thanx in advance
    Vishal Kr. Sharma

    Double click in the row against the WBS on actual column  element where you expect to see you actual cost.
    Regards
    Sreenivas

  • Cost elements not included in Cost Component

    We are getting an error which I do not get any clue.
    In the costing run message is coming that Cost elements 670001 & 400098 not assigned to a cost component.  However, when I checked the cost component structure, both these cost elements are included there.  Then why the system is saying that they are not included in the cost component ?

    Hi,
    In the  Costing data tab of the cost estimation screen you have Costing variant.
    Click on the costing variant, then in the Assignment tab you have cost component structure filed click it and check which is being used.
    Thanks & Regards,
    Ravi

  • Cost resources not included in EV calculations

    I am trying to figure out the logic behind this.  When you are looking at all of the costs of a project to compute EV, cost resources should be included.  Material resource values, work resource values and fixed costs are included.  What
    is the reason that cost resources have been excluded?  In my opinion this is not correct and they should be included. Many of my clients use cost resources for the flat amount contractors performing jobs where hours collection is not needed.  They
    also use them for added costs to the project like travel and equipment rentals.  Cost resource values become part of the baseline value - why not EV?
    Any ideas??
    Ellen Lehnert, PMP, MCT [email protected] www.lehnertcs.com Training/Consulting/Author

    Ellen and I have been having an email conversation and I see what she is reporting.  If you have assign both work and material resources and only update the material resource "actual work" the % complete does not update.  However, if
    you update the % complete, both a work resource and materials resources get "actual work".
    So, the moral of the story seems to be: (1) If using both work and material resources on a single task, update the actual work for both resources to show "progress".  or (2) assign only material resources to tasks.
    I guess I don't see a huge issue with material and work resources assigned - as the bricks (in our example) cannot lay themselves - a bricklayer (work) is required.

  • Actual Cost & Quantity not update in Process Order

    HI,
    Process order confirmed from Production person before maintain the actity price rate.
    hence those confirmation are gone in to the error & found in t.code COFC
    afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
    but still actual quantity & cost not updated.

    Hi Ajay
    'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
    You may need to raise an OSS message incase the program is not available to download
    BR,Ajay M

  • Cost distribution not working for -Ve Transactions

    Hi,
    We are spliting the cost for an misc transaction. The Splitted cost are got cost distributed. But the Reversal expenditure (-ve Transaction) is not get cost distributed.
    The cost distribute flag is enabled for the reversal transaction. but no credit or debit account populated. Please let me know what might be the issue.
    Thanks In advance
    Thanks
    Raj

    Check the cost distribution concurrent request's output. It will tell you the reason. It might be an auto-accounting issue too. Post the error code here.
    Sathish Raju
    www.projectsaccounting.com

Maybe you are looking for

  • CRM 2013 - "Save and Close" button behavnig like "Save and New"

    Hi, I am working in CRM 2013. I have a scenario in which I am saving new opportunity product record through javascript and preventing original save of CRM. Save is working fine. After save, I need to refresh the screen. So I have used "Xrm.Utility.op

  • Change Msg partner in support desk message

    Hi, I want to change the msg processor in support desk message from webdynpro. Which RFC Function module will be helpful ? Note : with the following function module we already tried , it is not changing msg processor in solution manager Sup dsk. crm_

  • Pages says I need an update, Software Updates says I don't

    When I open Pages 09 4.0.3 it tells me I need a software update. Yet running Software Update responds that all software is up to date. I believe there is a later version of Pages with improved Lion support (like full page modes). I've been to Apple S

  • Reg:Standard purchase oder printing

    Dear All, In ME9F transaction code we assigned one 'z' print program for standard PO printing and as well as one 'z' form(sap script ) name for standard PO printing. what is problem means we included one 'z' condition type for PO printing. where we h

  • How to move PDF file from Spool to Application Server?

    How to move PDF file from Spool to Application Server? Cannot use RSTXPDFT4 because that converts OTF to PDF and the file is already PDF. RSTXPDFT5 doesn't work. It picks the file up and assigns it a 'text' type and outputs a 1 line txt (1kb in size)