Billing date is not populating into the sales order

Hi Experts,
I am creating the sales orders by filling the IDOC's Segment data from a file. Sales orders are getting created however the BILLING DATE is not getting populated by the date from file instead it is taking the system date.
Segments used are
Header: E1EDK03 016 021 and 026.
Item: E1EDP03 016 021 and 026.
Please help me in this regard.
TIA.
Regards,
Kishore.
Edited by: kishore gaddam on Jul 18, 2009 10:06 AM

Hi,
Check with function guy , there could be some settings need to be done for getting external date populated in billing date field.
Thanks,

Similar Messages

Billing tab of BP are not populated in the sales order automatically

Hi
Business Partners Billing Tab details like customer pricing procedure, currency, price group, Customer group etc are not populated in the Sales order automatically?
I have checked the pricing procedure determination also.
Thanks

Thanks problem is solved.

Condition type not flown(not determined) into the sales order

Hello Experts,
There is one discount condition type which is having proper condition records, validity date.However, it is not getting determined properly and is not flown into the sales order. the user wants to know why this may happen.I tried to reason it may be the sales order date and the conditon record date may be different or the condition record is changed after the creation of the sales order.neither of the reasons seem to hold good. any ideas?
Regards,
Raj

Hello,
I have looked into the analysis and asked him to update the condition by clicking on that.also, I found that the condition record is having a proper valid date. now the user would update only after knowing the exact reason why it did not flow into the sales order,he knows he has to update the condition but would not do so till he knows the right reason why condition is not determined in the sales order. now this is the situation.
the probable reasons as per analysis of the conditon type are as follows(for your information). can it be one ofThere are different reasons for this:
1)The condition was deleted manually in the item condition screen.
2)The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again. them?
Regards,
Raj.

Billing Block removal not updated in the sales order change log

Hi Gurus,
A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing.
Sometimes the Billing block is getting released automatically and the Negative Invoice is getting created in the Background job run for creating the invoices. When we check the sales order, the Billing block is not existing and the removal of the billing block is not recorded in the Change Log of the sales order.In the CDHDR table also there are no details about the release of the billing block.
This is happening only occassionally. When I tried to replicate the issue, the system is not allowing me to create the invoice as long as the billing block is there in the sales order and if I remove the block, it is recorded in the sales order change log.
My doubt is.,
1. How the billing block is getting released automatically?
2. Even if the block is released, why it is not recorded in the Change Log of the sales order?
Looking forward your for suggestions and solutions.
Thanks,
Ravi

Hi
Did u check in sales doc. details screen.There u can block for billing.

Custom duty should be copied into the Sales order based on material

Hi,
Requirement is only Custom duty Tax condition types to copied into the sales order based on material (for e.g A) .Suppose customer X is buying material Y then different tax condition types is to be applied but if the same customer is buying material A then only Custom duty will be copied.
But we can set in the customer Master whether the maerial is taxable or not.So where to do the right tax classification settings so that sysyem will automatically fetch the right tax condition types if i enter one material which is applicable for Custom Duty only
We are using TAXINJ.
Regards
Jyoti

Dear Jyoti
As per your post, the material code is different for the same customer and hence you can differentiate the tax classification in material master. That is for material X, if you maintain Tax classification 1 in Sales Org1 view, maintain 2 for the material Y.
Now maintain different tax code for these tax classifications in VK11 / UTXJ.
thanks
G. Lakshmipathi

Onetime vendor - address is not copied into the purchase order ME21N

Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB

>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM

Sales Order Schedule line not populating in the Production order

Queation: Is there a way to tell the system to look at the sales order, line item AND schedule line. It is displayed in MD04 but it doesn't carry over to the Production Order. We are a MTO and this information is relevant in a number of ways.
Please Help.

Vickie,
If you are using MTO scenario then when you run the MRP for the material, it will create a planned order for that sales order based on the dates calculated from the sales order schedule line (Shipping tab)...
So now when you convert the planned order to production order, all the sales order details will get copied.
try and revert back.
Swapnil

Coupon specific discounts are not coming in the sales order

Hello Experts,
I have created a internal coupon campaign and assigned discounts to the campaign. We used condition type 1202 to assign the discount values in the campaign.
In the sales order when i enter the coupon id system fetching the corresponding campaign ID. But , sales order is not fetching the discount condition types mentioned in the campaign.
Below are the configurations i made.
1) Copied the condition type 1202 to ZCUI.
2) Assign this condition type to the condition maintenance group (1200) and keep the condition table as SAP12000
3) Maintain this condition type to the pricing procedure and assign pricing procedure to the Sales order transaction type.
4) In the campaign i have maintained the values for the condition type . -- Sales org, distri channel. divison, Product , discount value
5) I even verified that CNDCRMPRSAP12000 has the records for this campaign.
Now the question is do i need to do any customization in Campaign determination. I am not using TPM and it is a simple coupon campaign.
Please suggest me , your help is highly appreciated.
Regards,
Deeps.

Not sure if it works, may be you can check this
- is your condition type 1202's calculation type field has been defined as "percentage"?
- the pricing procedure that you are using, does it contain the corresponding condition type 1202 for discount amount?
- Has the pricing procedure been maintained for your org data in "Determine Pricing Procedure" in spro-> CRM-> Basic Functions -> Pricing -> Determing Pricing Procedure
Please check this.
Edited by: Harsh Singal on May 4, 2011 5:53 AM

Condtion value is not appearing in the sales order conditions tabpage

Dear Gurus,
I have Created the sales order and the price is taken from conditions record but the condion value Shown for the condition type is blank .
please do the needful to resolve the issue
Regards
Anil

hi,
if the condition record maintained matches the order based upon the key combination you maintained then it will flow into the order. If not, check the validity of the condition record you maintained at VK13, also make sure its not deleted. If you feel everything is correct with condition record then go to VA02 > item > conditinos > click the analysis button. It will tell why the conditino record was not picked into the order. reasons can be there is a susbsequent pricing condition, requirement not met etc.
regards
sadhu kishore

Free Goods not appearing in the Sales Order

Hi,
I have created the condition record for Exclusive free goods for a material. However when i create a sales order with the same material, the free goods materials is not appearing.
I did a Free goods Analysis in the sales order and when i checked the field values, I found that for a particular access sequence it says "Access not made ( initialized field)"
Please help.
Thanks.

Hi,
This error usually happens when we donot maintain any of the fields in the access sequence that we use.For Eg., if your access sequence is Sales Org/Dist Channel/Mat group and if you fail to maintain your condition record with the same sequence,you will get this error.Please maintain the condition record with the respective access sequence and you will not get this error.Please try and confirm.
(Also in the above example even if you maintain condition record and didnot maintain material group in the materisl master you will get this error.So check all the possibilities and confirm.)
Regards,
Phani Prasad.

Condition value of JMOD not appearing in the sales order.

Hi all,
Im encountering a peculiar situation where the conditon value of JMOD is not showing up in the sales order..It is however showing the tax rate.. Pls suggest.
thanks and regards
Joe

Hi joseph
some soution for you I googled for you
one example like yours i am just copying and providing info for you i dont know whether i can copy link or not here
here is the solution
I'm using TAXINJ procedure with JFACT as the pricing procedure for sales.
Here, I've maintained in FTXP, for IN00 and taxcode V1(new one defined),
taxes as desired and JMOD = 16%, AED as 2%.
But these values are not getting picked up in the pricing in sales order.
I'm keeping UTXJ correctly. I tried with % of UTXJ with 100%.
In the pricing analysis, I see that the condition record for JMOD is found correctly with 16%.
But it appears in the condition items as 0%
solution:
Check whether you have maintained the tax classification in material master and also check whether u have defined the same tax classification in VK11 for UTXJ, where u assign the Tax code.
Also check for customer tax classification. And check what you have maintained in J1ID. System will first search for values from J1ID, and then in FTXP.
And have you a sales pricing condition like JEX2 which is a copy of JMOD ? The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly - account key EX2.
I'm maintaining TAX classifications correctly in the material master, customer master and final tax classification for plant also is set correctly.
As I told, JIN1, JIN2, JIN4,JIN5 are picked up correctly and calculated. Problem is only for Excise.
And these values are getting copied initially, before I put PR00 manually.
Once I put PR00, all the conditions are set to zero back
Then after entering the price manually, u do the update pricing in Conditions View.
See, I have not altered any thing in the standard JFACT procedure. That means sales condition is there for JMOD to enable account posting..
Now, I've changed Tax category in OVK1, and put UTXJ alone there and now, JMOD is getting picked up and is calculating the value..
But note that I've maintained 10% as JMOD in FTXP.. and 8% in the J1ID excise rate maintenance for chapter ID.
Can I do away with Excise rate maintenance for chapter ID. So that I will get the % maintained in the FTXP..
did the tax code pick up correctly... did u maintain the chapter Id and excise rate fro teh chapter ID
I could solve the proble..
In the excise group assigned to the plant, I had to check on the indicators, SED and AED.
Hope its clear your issue.
Regards,
Krishna.

Siebel - BIP Issue: Data is not populating in the report

Hi Guru's
You have any idea why there's no output data in a section of the report? I generated the xml for a record from siebel and tested that with my updated template and it's working fine. All sections are populated. But when I tried to upload it in Siebel the template and the updated xlf (from generated xml) and run the report, one section of the report don't have populated data. It's pretty weird bip. In that section of the report that without populated data, this is the codes:
<?for-each:/SiebelMessage/ListOfBipPubHlsIncidentIo/PubHlsIncident/ListOfHs1IncidentContact/Hs1IncidentContact?><?sort:Household2;'ascending';date-type='number'?><?sort:Role;'ascending';date-type='text'?>.................<?end for-each?>
Need your thoughts.
Thanks,
JP
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM

HI,
Give the same Selections in the list cube same as in Report and run see if there are any values coming in the Listcube.....If u r getting the values then you should get same in the Report....
Check with the authorizations to view the data....
Thanks/tarak

Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

Urgent ......data is not loaded into the ODS

Hi,
we try to load the data in to ODS via the Infopackage. Job is finished with Green status. In the requests tab I saw that transferred are 1486 & the addded records are 1486.
But the ODS sah empty structure, no records are loaded into the ODS?
Any suggestions please?
sailekha

Hi
It is availabe for reporting the status is green
all the related objects are active
I try to actvate ODS Data, But it asks me the job name
I am unable to actvate the Data of ODS.
Still I have the same problem how to proceed further........please let me´know
Yesterday It is working fine but today I got this problem in Production.
any suggestions please......
thanks in advance

Taxes not picked in the Sales Order

Dear Friends,
After creating all the tax structure per jurisdiction and assigned to respective sales orders, when I create a sales order and check for the conditions , i have conditions records for taxes missing.
it throws the error like..
"Taxes code AJ in procedure in Taxcode TAXUSJ is invalid".
I checked tax code assignments and they are all fine..please tell me where do i look for these
Thank you
Ravi

Mr,Laxmipathi,
Thank you very much for your reply..all the tax codes are maintained correctly for CA..when I am trying to create condition record for CTXJ..now a new message appears.
" Condition CTXJ does not allow supplimentary conditions"
Diagnosis
Branching to the additional condition screen is only allowed for conditions with a permitted condition type.
Procedure
Check the Customizing setting for the condition type. The additional pricing procedure for this condition type is not entered.
I did check ..but could not trace out..please help.
Another Question to you:
Can we bring Shipping Tab which is hidden in Header of Sales Order into one of the Item level Screen Tabs ..(this is my client requirement)..they wan Item Overview, Item Detail to be hidden in that place can this tab appear.?
Thank you very much well in advance..
Ravi

Billing date is not populating into the sales order

Similar Messages

Maybe you are looking for