Actual work in MS project project is different than PWA Business Intelligence report
Hi
Actual work in MS project project is different than PWA Business Intelligence report
(Numbers are different) Di u know why?
Hi Project help,
As mentionned before, I suggest you to open the period, recall the timesheet, update actuals and submit
it, approve it by the project manager, open the plan and publish it.
The steps can be performed using a delegation session if you don't want to bother the team member and the
project manager.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Similar Messages
-
NTSC Project to PAL - Different than previous posting
I have a NTSC project in Encore 2.0. I rendered videos for it in NTSC and PAL from Premier.
My problem that I don't want to rebuild my entire DVD project in Encore just to link the PAL videos.
But, I haven't seen a way to export the project or save it as a PAL project.
Any tips or clues? I want the PAL project to be just like the NTSC project except to use the PAL clips instead of NTSC.
ChuckChuck,
With all due respect, did you read/understand BJ's post just above yours?
He describes what issues you will encounter with Encore or any software, and why, even if you could convert the video on the fly, the menus would need to be re-done from scratch.
Finally, no. There is no project setting you can change. You must start a new project. If you dig around in the project folder of the NTSC project, you can probably decipher which are the menu files. Maybe you can salvage something from that.
Best of luck,
Jeff -
What I synced my iPhone 3G S, it lost much of the music and podcasts (but not all). In iTunes on my Windows machine it shows that the phone has everything that it had on it before plus the new podcasts, playlist, and music I had tried to move to it. But, what is REALLY on the phone (i.e. that which I can access through playlists and my music/podcasts) is much less - with most of it missing. Additionally, for the new playlists I added, the playlist titles were added, but when I go to play them on my iPhone the playlist if totally empty, even when I access the iPhone's playlist when the iPhone is plugged in via iTunes it shows all the songs on the playlist. I've tried to reset the sync history, but that doesn't help. Has anyone else experienced this problem? I'm hoping there is a solution other than resetting to factory settings.
previous posts cover this in depth but 1 thing I haven't seen in the possible solutions Is the location of your music folder.
I keep my music on a portable hard drive but after the upgrade my "iTunes media folder location" had defaulted to the c:/ drive
select the actual music folder location and let your library update e- you can then sync ! -
Question on original work and actual work
Hey folks,
Sometimes the simplest things in Project befuddle me. I'm working in Project 2010 Standard. I have a whole bunch of "Fixed Work" tasks. This is a pretty simple project, and I haven't done baselines or anything like that.
So let's say I have a task, "Build X" that is was originally estimated as 4 hours of work. That is entered into the Work column.
During the project, Build X gets completed, and I learn that it only took 2 hours of work. I want to enter this into Project so that we know that:
Task "Build X" is 100% complete
The actual work was only 2 hrs
The original estimate was for 4 hrs
However, if I enter 100% into either % complete or % work complete, Project changes the Actual Work to 4 hrs, which is wrong. If I set the Actual Work to 2 hours, Project changes % complete or % work complete to 50%, which is also wrong.
Is there anything I can do here that doesn't involve baselines?
Thanks!sbattisti,
What have you got against setting a baseline? A baseline captures your original plan. The schedule will be dynamic and as things happen Project updates that dynamic plan to reflect what really happened. So no, there is no way to do what you want without
a baseline, except perhaps of capturing the original work value in an extra field (e.g. Text1), but there's no point in doing that.
Set a baseline. That will capture "Build X" as being originally planned at 4 hours work. When you later find out that it only took 2 hours, you enter that into the Actual Work field and set the Remaining Work field to zero. That tells Project that
the task is in fact complete and it only took 2 hours. If you then display the Baseline Work field you will see that the original plan was 4 hours. You can also display Work Variance.
Hope this helps.
John
OK, thanks very much. I'll do that.
I have a follow-up question, but it's not really directly related, so I will post separately, thanks! -
If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
ThanksSorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/
-
Project Versions: Plan Work and Actual Work
Hi,
Can you pls suggest me,
where can i get Project actual work and planned work from R/3.
which R/3 table will provide this information for different Project Versions.
Thes values are required against each Project version.
Your valuable inputs will be rewarded.
Thanks,
Lakshmi.Hi,
We have the following scenario: The system does not default the Actual Duration when the Start Date, Time and Finish Date, Time are entered on the time confirmation, it should calculate the time and insert the value in the Actual Duration field.
Is it possilbe.
Regards
JF
Please open a thread for your specific query.
-Paul
Moderator
Edited by: Paul Meehan on Sep 9, 2011 10:59 AM -
Can two different account work on the same project?
I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.
Hi Alexandre,
At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
- Abhishek Maurya -
Does anyone have experience with having multiple editors work on the same project from different computers?
As much as I hate to admit it, YOU ARE RIGHT!
I will tread lightly on this project.
Thanks for the sanity check,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Hi,
One of our PMs is trying to change a task in his project plan and gets the following message: "cannot delete or reassign tasks or assignments with protected actuals" . This would normally be ok since we have setup actual work to be reported only
through the timesheets but....when checking actual work on this task, there is only 1 resource allocated and he reported no hours. Interestingly, it shows 0 in the actual work and it's not empty (as you would expect if you dont report hours).
We tried to recall the timesheets of that resource and resubmit them (without any hours again) but that didnt work either. Idea good ideas?
Thanks
Choc
Chocob21Hi,
has user changed "Remaining Work" to 0? I have not tested, but I assume that cause 0 displayed as Áctual Work and stops you from deleting task.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support! -
MS Project Professional 2013 AppCrash - Updating Actual Work - 0xc0000005
Hi All,
We are experiencing a MS Project Pro 2013 appcrash with the following event log:
Faulting application name: WINPROJ.EXE, version: 15.0.4551.1007, time stamp: 0x52714aed
Faulting module name: WINPROJ.EXE, version: 15.0.4551.1007, time stamp: 0x52714aed
Exception code: 0xc0000005
Fault offset: 0x0000000000446774
Faulting process id: 0x1c08
Faulting application start time: 0x01cf2b7cddb57f07
Faulting application path: C:\Program Files\Microsoft Office\Office15\WINPROJ.EXE
Faulting module path: C:\Program Files\Microsoft Office\Office15\WINPROJ.EXE
Report Id: 834a49f7-9770-11e3-abb0-3c970e6a0fc0
We are connected to a vendor hosted Project Server 13 environment.
Steps to reproduce:
We open any project from the server
Split the view to gantt and resource sheet
Update a task actual work
Navigate to another task
AppCrash occurs
Project Pro 2013 32bit install on 64bit win7, along side either office 2010 32bit or office 2013 64 bit.
Any assistance would be appreciated.
Cheers, JoelDo you have a chance to save the project file onto local machine, then test whether it would crash again after repeat the steps. If it's a server performance or networking issue, this should help to narrow down it.
On the Project client site, you may disable all of add-ins to avoid their interfered.
Tony Chen
TechNet Community Support -
Error Project Server 2010, % Complete, Work and Actual Work
Hi Everyone
I have a Project Server 2010 SP2 Environment, The farm contains 3 Servers.
1 WFE, 1WebApp, 1 BD. All servers in the farm are Windows Server 2008 R2 and the Data Base Server is SQL Server 2008 R2
The Context:
The Project Managers create the Project in Project Professional 2010 SP2 for support Annual Maintenance about a software, then the team members go to my tasks in PWA to create the task inside the stage in the project, then they put the actual work, then they
send the progress to his project manager.
So, the project manager goes to the approval page to approve two times, one, the task creation and two, the progress.
So far all ok but when the project manager open the Gantt in Project Professional 2010 SP2 , the task that the team member has sent appear with a 100 percent complete, but the work with 0 hours and the actual work with 0 hours too, being that should appear
with the hours the team member has sent, that is my problem.
This occur only with this project manger and his team member, all of others project managers in the platform don't report this issue.
I already have re open the project and re publish too
So , let me know if you have some idea about this issue.
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing ProjectsOnly other ideas is to make sure the duration isn't 0, which would make it a milestone.
Have the resources, recall the timesheets and resubmit. Run it thru cycle again and see if they actual show up.
Finally, you can run SQL query and see where the data may be.
1) Check if status manager is who you think it is
2) Check if project shows actuals in sql. Doesn't explain why not showing in schedule.
cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Work Variance Incorrect in Project 2010
I have 2 projects with the same start date in the future. No work has been done on them. Each has the same following values, but the resulting work variance at the project summary (0) is different. The formula as I understand it : Work
Variance = Baseline Work (Actual Work - Remaining Work). Why the difference?
Work Variance (project 1) = zero; Work Variance (project 2) = 485
Baseline Work = (NULL)
Actual Work = zero
Remaining work = 485
We are running Project Server 2010, SP2, Patched to April 2014.Two questions:
With those values, having a WV of 485 is correct.
1) Is the Calculation set to Off in the project that shows 0 hours? Force caluclate by hitting F9 and see if it changes anything.
2) Are you really looking at the project summary task? some times PMs create a task as the summary task for the project which is not task 0.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
How can i transfer iWeb projects to a different computer?
This may be a simple question, but does anyone know how I can transfer an iWeb project from one computer to another, so that I can work on the site from a different computer than the one that created it?
The same way you transfer all your other documents.
~/Library/Application Support/iWeb/ -
We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses for the respective machines to make matters simple (at least we thought it would).
Now when we share a sequence between the two machines, every time we have to import and re-link media. Also each sequence import comes with its own set of files, which are actually already present in the project. Basically the new sequences are looking to re-link the media to the original/ source files only and are completely ignoring the file structure present in the project.
In all editing softwares, timeline/ sequence sharing is a very common practise when working on multiple machines. Why is it so tedious in CC 2014? Every time we share a sequence between the two machines the media gets doubled and tripled in the project. As a result the project file size is increasing perpetually. Already Premiere CC 2014 is extremely laggy and slow, and this stupid bug is making it more difficult for us to finish our work on time.
Has anybody ever faced this issue? How do we solve it? We are willing to try out any workflow that you can suggest.Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium -
I started working on a Flash project and I'll be moving it back and forth between two different computers. The project was originally started in Flash CS4. The other computer has Flash CS5.5 installed. So when in CS5.5 I save the fla as a CS4 version FLA.
I hit Save As... and then from the Save As Type pull-down menu I selected CS4 Fla document and I assumed that from then on I could just hit ctrl+s to save the project and it would maintain the CS4 version. But that isn't quite what's happening. Every time I hit ctrl+s a Flash Compatibility Warning pops up and tells me that I need to use Save As... and then Save As Type again to keep it a CS4 document.
So basically, from what I understand, when working on a CS4 project in CS5.5 - I can't use Save. I can only use Save as...
This is really annoying because I am accustomed to hitting ctrl+s pretty often.
And now EVERY TIME I wish to do a simple save, I need to hit ctrl+shift+s, then select CS4 from the Save As Type menu, then hit save, and then click YES when asked if to overwrite the previous file with the same name.
Is this a bug?Flash will let me Embed the FLV but not let me use it for playback.
Maybe you are looking for
-
HP LaserJet Pro MFP M125nw problem with printing printers key
Hi I would like to print page with printers code for HPePrint center in order to add printer to the service. When I switch on this service - I get information that test page with configuration will be printed - and HP is not printing anything. Other
-
My coworker has a fairly new iPad with retina display. She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply. It has an ok button to acknowledge the message. Every
-
Can i comment out lines of code in a .sql script file to be run in SQL PLUS
Hi All, I have commented out part of the script, and when i ran the script (.sql) file in Sql*Plus I am getting some errors like SP2-0734: unknown command beginning how to avoid these errors? any help is appreciated Thanks R.R
-
Hey there. I am deploying a WAR file on OC4J 9.0.4.0, and it has a taglib that I wrote as well as the "core" tld. I have made sure that my tag classes, my tld file, and my web.xml conform to JSP 1.2 as JSP 2.0 does not appear to be supported. I recei
-
Need I the JAVA Addin for Web dynpro ABAP
Hello Experts, have I to install the JAVA-Addin for using Web dynpro ABAP? Best regards Heike