AD Connector Remote Manager Question
all,
trying to install MSFT AD BASE 91170 connector on OIM/OAM 11.1.1.3 environment. Finished the following steps thus far:
1. created OIM/OAM/AD server environments
2. Created OIMGroup and admin user account association
3. Imported the connector
4. Update ADITResource
5. Copied ldapbp.jar and ran uploadjars.sh script
6. Updated search base in Group Lookup Recon and Organization Lookup Recon jobs
7. I was able to provision a user
I have two questions:
1. section 2.2.2.1 (on page 2-14 connector indicates that i need to run installation of remote manager on the AD server). Is this step and the subsequent steps required to be configured. What else do i need to run as part of installation. If the rest of the steps are optional in what cases do they need to be created?
2. My design console Lookup.ADReconciliation.GroupLookup does not have any values, it appears recon did not work in this case. What could i be doing wrong, i can add configuration details if needed. - I have done this before but not sure what i missed this time.
Thanks in advance,
Prasad.
Edited by: Prasad on Oct 25, 2011 11:48 AM
Sagar,
I ran the group lookup recon task several times yesterday. OIM did not populate the lookup. Today i change the recon type from Refresh to Update and changed it back to Refresh and it worked with few exceptions like the one below:
Overall now the records are there, but it is unclear why the original task executions did not pull anything. I did not see any other exception either yesterday.
<Insert failed.><Oct 26, 2011 10:56:27 AM EDT> <Error> <OIMCP.ADCS> <BEA-000000> <Description : Insert failed.>
<Oct 26, 2011 10:56:27 AM EDT> <Error> <OIMCP.ADCS> <BEA-000000> <Thor.API.Exceptions.tcAPIException: Insert failed.
at com.thortech.xl.ejb.beansimpl.tcLookupOperationsBean.addLookupValue(tcLookupOperationsBean.java:1357)
at Thor.API.Operations.tcLookupOperationsIntfEJB.addLookupValuex(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1896.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethod
Similar Messages
-
Connector Server Vs Remote Manager
If your connector requires/supports connector server, is remote manager needed at all anymore for that connector?
To those of you here in this thread, I have a question about Vine and autostart in OS 10.5.
I configured autostart (through the Users Systems Preference) to include Vine. When the mac starts, it puts the round green Vine icon in the dock, but it does not actually start it. To do that, I must click it. That causes the icon for the volume (the white box) to appear on the desk top, a white dot to appear beside the green icon (saying its running), and a screen to appear that says the server is running, which, when minimized becomes a screen icon under the dock divider bar.
It would seem all I have to do is click "Open on Login" on the green icon in the dock. I do that. But it doesn't stick for the next re-start. Restart puts the green icon in the dock, but "open at login" is no longer checked (which is why it doesn't start).
In summary, what I have done causes the Vine icon to appear in the dock on a boot, but does not actually start it.
Any ideas how I proceed? -
Rd230 simple question re remote management module
Hi,
Just purchased and installed rd230. Installed win2008 R2 SP1 (manually...not with easystartup).
I'm reading the user guide for remote management module. Looks great! One thing...how do I setup the RMM???(IP address...etc). It's not in the BIOS setup...I don't see any prompt at boot to enter a config utility for it....any help??
Thanks
M
Solved!
Go to Solution.You will find conrfiguration information and answers to other RMM related questions in
ThinkServer RD230 and RD240 Remote Management User GuideThinkServer RD230 and RD240 Remote Management User Guide:
download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/00697mst.pdf -
Linksys rv082 Remote management Ports, question?
- Remote management : I would like to set up Port 8700.
Question ?
8700 Port can not be changed
Check the contents:
Initialization, Check that the default port for the present ecology.Hi winlovepc, I believe you need to contact Cisco for that model since it's a business class VPN router. They will be able to properly help you out with it.
-
How to execute vb script with out using Remote manager in oim 11g r2
Hi Currently,
i have a requirement to execute vb script (present on a remote machine in which connector server is installed) from oim machine while using Exchange connector (11.1.1.6).
This can be achieved by using remote manager,but i dont want to use remote manager.
Hence decided to use Action scripts.
As per connector configuration,
i have configured Action scripts in Lookup.Exchange.UM.Configuration lookup definition, by means of three entries
After Create Action Language Shell
After Create Action Target Resource
After Create Action File /home/scripts/Disable.bat
Disable.bat has the following ,
Powershell.exe -File C:\scripts\Setup.vbs
-%Log on Name%
Exit
As Setup.vbs is expecting a parameter of log on name, i was providing the same.
But while creating the user,as this script gets called, getting the following error and hence 'create User' is getting failed.
Problem while PowerShell execution System.Management.Automation.RemoteException: This task does not support recipients of this type. The specified recipient XXXXXXXXXXX...XXXXX is of type UserMailbox. Please make sure that this recipient matches the required recipient type for this task.
While provisioning the user to Exchange , i have selected 'Recepient type' as 'User Mail box' explicitly, but still getting the error.
Please provide any pointers to resolve the issue.
Thanks in advance
KumarAs far as I know Oracle and MySQL are two different products.
Why do you clutter an Oracle forum with MySQL questions?
If MySQL is such a tremendous RDBMS, like many people state (as 'free' means per definition better),
why don't you visit a MySQL forum where fellow MySQL aficionados can answer you MySQL questions?
In short, why don't you stop abusing Oracle forums?
Sybrand Bakker
Senior Oracle DBA -
Microsoft-Windows-Windows Remote Management Error ID 142
In my Windows Server 2008 R2 OS in the Event Viewer there is an error pertains as Microsoft-Windows-Windows Remote Management Error ID 142 states-(WSMan operation CreateShell failed, error code 2150858999).What is this error? And What is the remedy for this
error?
System
Provider
[ Name]
Microsoft-Windows-WinRM
[ Guid]
{A7975C8F-AC13-49F1-87DA-5A984A4AB417}
EventID
142
Version
0
Level
2
Task
10
Opcode
2
Keywords
0x4000000000000002
TimeCreated
[ SystemTime]
2011-11-10T06:32:40.654451200Z
EventRecordID
37902
Correlation
[ ActivityID]
{01F11C40-F800-0000-0091-795E689FCC01}
Execution
[ ProcessID]
7140
[ ThreadID]
8080
Channel
Microsoft-Windows-WinRM/Operational
Computer
WIN-BNILITE1545.mumthaz.contoso.com
Security
[ UserID]
S-1-5-18
EventData
operationName
CreateShell
errorCode
2150858999
MumthazMuhsinHi,
Please perform the following steps to check the issue can be fixed.
Create the following Dwords under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
• MaxFieldLength
o Dword
o Value 65534 (Decimal)
• MaxRequestBytes
o Dword
o Value 40000 (Decimal)
Reboot the server for the changes to take effect.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
OIM 11g x Remote Manager x Exchange x VBScripts arguments
Hello,
We have OIM 11gR1 on Linux and the conectorsMSFT_AD_Base_9.1.1.7.0 and MSFT_Exchange_9.1.1.7.0.
The shell used to create Mailbox is the 2007 one (CreateMailboxExchange2007.vbs).
In that script there are 3 arguments being received
Set args = WScript.Arguments
' Argument 0 contains the Log On Name
Wscript.echo args.Item(0)
' Argument 1 contains the Mail Store Database Name
Wscript.echo args.Item(1)
' Argument 3 contains the Report Log Path
Wscript.echo args.Item(2)
And the command line:
shell.run "PowerShell.exe -PSConsoleFile ""C:\Program Files\Microsoft\Exchange Server\Bin\exshell.psc1"" -noexit ""&{""Enable-Mailbox "&args.Item(0)&" -Database '"&args.Item(1)&"'"";""exit 0""} >> "&args.Item(2)&"",,20
I couldn't find where those arguments are configured at OIM objects. I found the first and second in Exchange Form and the third in Exchange IT Resource. I guess that the process task CreateMailbox from the conector's Process Definition probably calls the Remote Manager that calls some java code to call this script, right?
The problem is that my client needs the command below for provisioning:
Enable-mailbox -identity [email protected] -Database "serverxxx\SG_OIM\MDB_OIM_PR" -Alias User -displayname "Test User - Company" -primarysmtpaddress [email protected]
I'd like to know if it is possible and how to add more arguments to pass to the VBScript to use on "Enable-Mailbox" command.
Could you please let me know?
Thanks
Sil
Edited by: 958794 on Jan 24, 2013 10:51 PMIf you want to pass additional parameters to this script, it requires lot of changes which is not suggested.
You need to change ootb connector java code to pass additional paramters and then the vb script too and process definition --> process tasks. -
Windows Server 2008 - How to remotely manage account passwords?
I'm hoping to get direction on how to remotely manage 'user accounts' on Windows Server 2008 machines. The remote management would be from an automated perspective. For example, I have a custom application (maybe C#, Java, etc) that runs on one
server that makes connections to various 'Windows Server 2008' servers; and I want it to be able to do the following.
Query Windows Server 2008 box for full list of user accounts
Update password for user account
Lock account
Unlock account
Check policy information to find out when password may expire
I'm trying to find out what may already be available and running on Windows Server 2008 that I can take advantage to get this done programmatically.
-WesI agree with Mekac, the gallery should provide a lot of script of what you want to do.
Like ;
https://gallery.technet.microsoft.com/Password-Expiry-Email-177c3e27 - Password Expiry Email Notification.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it! -
Disable the Remote Management Service?
I know this is "Why would anyone want to do this" question but we are having conflicting issues in one of our labs between NetSupport and Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite a few of our lab teachers use, it gives them the ability to see all of there students screens, take control of them, and a few other features, all from a console that runs on the teacher machine.
The problem comes in when running Flash if the student tries to create a text box and scroll inside of it then the computer crashes. We contacted NetSupport for help with this and they had us run a reporting tool that looked at the hardware setup and driver information. Then they setup a test machine and tried to replicate the problem and they were not able to. However they tech did note that in the scan of the machine there could be a conflicting issue between NetSupports Mirror Driver and DemoForge TightVNC Mirror Driver. I assumed the latter was part of Zenworks remote management. So we stopped the remote management service on a machine and tried to replicate the problem. We did not encounter the problem so we turned the remote management service back on and sure enough as soon as we tried to replicate the problem again the machine crashed.
Now when we tried to disable the remote management service in the services menu but it will not stay disable as soon as the machine restarts the remote management service is running and its set to automatic again.
Is there anyway to disable (preferable) or remove just the remote management piece with out removing the rest of the client from the machines?
Thanks,
MikeYou can configure this in the ZCC for which components you want
installed. You can deselect Remote Management.
Note: You can also disable or remove the Mirror Driver from the Devices
Control Panel under Display Drivers and it will not come back.
On 1/13/2012 2:36 PM, mshicks wrote:
>
> I know this is "Why would anyone want to do this" question but we are
> having conflicting issues in one of our labs between NetSupport and
> Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite
> a few of our lab teachers use, it gives them the ability to see all of
> there students screens, take control of them, and a few other features,
> all from a console that runs on the teacher machine.
>
> The problem comes in when running Flash if the student tries to create
> a text box and scroll inside of it then the computer crashes. We
> contacted NetSupport for help with this and they had us run a reporting
> tool that looked at the hardware setup and driver information. Then they
> setup a test machine and tried to replicate the problem and they were
> not able to. However they tech did note that in the scan of the machine
> there could be a conflicting issue between NetSupports Mirror Driver and
> DemoForge TightVNC Mirror Driver. I assumed the latter was part of
> Zenworks remote management. So we stopped the remote management service
> on a machine and tried to replicate the problem. We did not encounter
> the problem so we turned the remote management service back on and sure
> enough as soon as we tried to replicate the problem again the machine
> crashed.
>
> Now when we tried to disable the remote management service in the
> services menu but it will not stay disable as soon as the machine
> restarts the remote management service is running and its set to
> automatic again.
>
> Is there anyway to disable (preferable) or remove just the remote
> management piece with out removing the rest of the client from the
> machines?
>
> Thanks,
> Mike
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
[Kindly help me understand]Urgent:Provisioning using Remote Manager
Hi,
I have a requirement to auto provision a resource to a 3rd party system as soon as it is created. We can not do it using DB Connector, as well as WebServices.
The remanining option is to have their jar in our system and invoke a Java Task, which introduces tight coupling and not well suited.
So, I have thought about creating a Remote Task, where in I would introduce my jar, which will just open a URL Connection to the 3rd party system using Remote Manager.
My query here is:
1. Is this a feasible and a good approach?
2. If yes, then how do i connect to this api using Remote Manager. I created a Remote Task, and defined a IT Resource Type definition. As per my understanding, we need to introduce a IT Resource of type Remote Manager as well. However, the design console is now showing any type of IT Resource Form.
OIM version used: 11.1.1.5 and references used : http://itnaf.org/2011/07/27/installing-and-testing-remote-manager-on-oim-10g/
Please suggest how to go about it.
Thanks!Kewl
-
I accidentally set a remote mac to "remote management" while screen sharing. I did not realize that this set it to require the commercial Apple Remote Desktop application to get to it. Can I remotely reset it to screen sharing? It has disconnected me from accessing it using iCloud.
Good question, and I am not sure. I believe the remote login WAS checked, so if that is needed, I think that is a available, unless checking Remote Management unchecked Login.
I am not computer illiterate, but I am not a professional IT guy. I read about more subjects than I know. Back to My Mac should still be set up in iCloud and I have seen some discussion of using ssh with that, and I am gathering that you are talking about ssh when you talk of remote shell access?
Thanks. -
Pardon the dumb question here, but why can't the remote management (which appears to use the built-in VNC server in SLES 10?) just "use" the root user/password without having to muck around with the password command?
We normally enable "remote administration" on all our SLES 10 servers for "regular" VNC access. Obviously we can login as the root user.
But it seems ZLM has its own criteria? Would seem a bit odd (to me) to not allow root to be able to remote control a machine via ZLM without having to muck around with the password command (and then you have to remember to change it on every server if you ever change your root password).
Or am I missing something here?Originally Posted by kjhurni
Pardon the dumb question here, but why can't the remote management (which appears to use the built-in VNC server in SLES 10?) just "use" the root user/password without having to muck around with the password command?
We normally enable "remote administration" on all our SLES 10 servers for "regular" VNC access. Obviously we can login as the root user.
But it seems ZLM has its own criteria? Would seem a bit odd (to me) to not allow root to be able to remote control a machine via ZLM without having to muck around with the password command (and then you have to remember to change it on every server if you ever change your root password).
Or am I missing something here?
To enable the Remote Control for the root user under ZLM/ZEN11 , you need to Allow remote access of the user root to your display manager . It can be done by either editing the file /etc/sysconfig/displaymanager and setting DISPLAYMANAGER_ROOT_LOGIN_REMOTE="yes" if defined as "no" , and then restart X (/etc/init.d/xdm restart or using init 3/init 5) .
The display manager setting can be also modified in YaST using yast2 sysconfig -> Desktop -> Display Manager.
Thanks
Arvind -
Problem connecting to Remote Manager
Hi,
We installed Remote manager on AD 2008 machine
Then followed AD 2008 connector documentation copied the RM_HOME/xlremote/config/xlserver.cert file to OIM Machine
Imported the RM certificate by using the keytool utility to OIM .xlkeystore
started remote manger.
could not connect through design console by double-click Remote Manager. (No Remote Manager Currently running)
Then copied the oim Certificate (OIM_HOME/xellerate/config/xlserver.cert file) to RM machine and imported the certificate
to RM .xlkeystore and tried again...still could not connect
(could not connect to remote manager in Design console and can't create IT Resource for Remote Manager).
Thanks..
Edited by: IDMuser19 on Nov 10, 2009 10:02 AM
Edited by: IDMuser19 on Nov 10, 2009 10:03 AM
Edited by: IDMuser19 on Nov 10, 2009 10:04 AMWorks fine now..thanks
-
Do you know if out of the box connectors bundled(9.0.4.1) are supported using Remote Manager?
Remote Manager and OIM Server are in a different location
RegardsThe majority of the out of the box connectors don't require (or use) remote managers. There are a few exceptions, typically when the target systems don't have network aware libraries available at all or on all the operating systems that the OIM server supports.
You can't use a non-remote manager connector via remote manager as there are required changes in both the forms and the underlying adapter code. -
Setting up Remote Management for external users
Hi All,
We currently have a zenworks 10.3 environment set up and all appears to be working well on the LAN with regards to being able to remote control machines etc. We are now looking to expand the remote control to enable support staff to remote control machines outside of our LAN.
From what I understand so far through reading the zenworks documentation, is that we would need some kind of proxy server setup in the DMZ that will listen for requests from the client device and forward these on to the agent. There will inevitably need to be firewall changes etc etc... but i guess my question is to you guys who I expect have set some this up in your own environments, is how have you guys gone about achieving this? Its evident that there may be more than one way to achieve this, but would be useful to know the correct way of doing this?
I know the question is a little vague, but this is the first time we’ve looked into the remote management externally - and this is where all the knowledge is :)
ThanksMartyu89,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
I Trusted a person but he backed stabed me
Hello, My name is Gintaras, on the 01/08/2014 to 04/08/2014 one person who i trusted got hold of my skype password and use my nephew's credit card information to buy skype credits for 140 euros. I am trying to get a full refund because the purchases
-
Hi there CRM Experts/Community, We are a Dynamics CRM Customer (CRM 2011 & 2013 On-Prem), and we have existing CustomerSource Accounts. We are very interested in attending the MS CRM Enterprise Academy Advanced Developer Training (see links below). I
-
DTP Stuck in Production System
Hi All, We have a DTP(cube to cube load) which runs daily in a process chain. Last week it got stuck twice without extracting any data and the status as yellow. We made the status RED and deleted the request and repeated the step in the process Chain
-
How do I restore completely to OS X 10.9.3
Hi all, I recently purchased a mac book pro w/ retina display. I am coming from using windows my entire life. Every time I wanted to restore my pc or laptop I would just delete the partition and re-install my OS and have a fresh clean start. Now I kn
-
I have 2 Apple Wireless Keyboards (old style, not flat) that will not pair.
Hello. I own a MBpro, A Mac Pro, and a Mac Mini. I have 2 Apple Wireless Keyboards (the old style with the extended keyboard and transparent case with white keys). Neither keyboard will pair on any system. The Macs see one of the keyboards just fine