AD OID mapping rule questions

Hi,
Can someone please tell me how to map the first and last names from AD to OID in the mapping file. Currently I have the following and wanted to make sure if it's correct:
sn,SAMAccountName: : :person:sn: :person:sn|SAMAccountName
givenName: : :person:givenName: :person
# Map the userprincipalname to the nickname attr by default
#userPrincipalName: : :user:uid: :inetorgperson:userPrincipalName
# Map the SamAccountName to the nickname attr if required
# If this rule is enabled, userprincipalname rule needs to be disabled
sAMAccountName: : :user:uid: :inetorgperson:sAMAccountName
The other question I have is why we need to disable userprincipalname rule when the following is enabled. As I am also trying to enable WNA/SSO too, what other rules I need for that in my mapping file.
sAMAccountName: : :user:uid: :inetorgperson:sAMAccountName
Thanks

I have these first two rules here and they seem to be working fine. But I think you will have trouble with the third one with WNA authentication.
About the two last rules for uid, the reason you can only have onle one of these is that both are storing a value on the uid attribute. You need to choose wether you want to use the samaccountname or the userprincipalname on it.
I remember seeing somewhere that for WNA authentication to work the uid should be in the format [email protected], so you would need to map userprincipalname to uid instead of samaccountname, I am not absolutely sure about this since I have never setup WNA.
And also you would need to populate the krbprincipalname. I think this one is automatically copied to the orclsamaccountname attribute, which is required. I have a rule like this here:
userPrincipalName: : :user:krbPrincipalName: :orcluserv2:trunc(userPrincipalName,'@')+'@'+toupper(truncl(userPrincipalName,'@'))
There are some walktroughs on Oracle By Examples that I found very usefull. This one is for WNA:
http://www.oracle.com/technology/obe/obe_as_10g/im/wna/wna.htm
Regards,
Luis

Similar Messages

Directory Integration Platform - DN Mapping Rule

Hi all,
Can anyone help me with setting up the mapping in a directory synchronization profile in DIP?
Using the GUI, the three fields required are Source Container, DIP-OID Container and DN Mapping rule.
The containers are obvious but what is the syntax for setting the DN mapping rule? I just want to match equality on the cn attributes in each container.
Many thanks,
Bernie

r u using the AD specific or Default schema?
Cant u simply put the selection criteria as "Present" instead of "Bank" - of course since you say that dn is not available we need to see which field should provide the info.

Gettin Error While activating Device Mapping Rule

Hi all,
I am getting below error while generating Device attribute mapping Rule :
Err:Metainfo FM MMW_DM_DSMS_METH_META - Class Name not specified
Any idea how to resolve this problem.
Regards,
Abhishek

Hi Abhishek,
Custom attributes will not be reflected under category list.
It can be viewed by clicking 'customize' button only in sdoe_rmm01.Do not add custom attributes part of category.
If you have clicked 'Admin UI display' while creating it will get reflected in the admin portal under single valued or multi valued attributes tabs .This way it allowes you to assign custom atrribute values to devices from admin portal.
By the way when you created the other attributes.in category .how did you manage to give proper data types ?
When you say , backward compatible, are you planning to migrate the SyncBOs defined in MI to the current DOE?If yes , this is all that you need to do.
Regards,
Liji

How to insert data in the table without join and using mapped rule value

1.Table SOL_K
A B C D – Columns Name
C D A B –Coulmns Values Defined (Rule --- Defined)
2.SECOND table SIC_K
SIC_ K
A B C D
Kamal Micky NULL MANOJ
3 Table SIC_Mapping
Same Columns A B C D based On Table SOL_K defined rule
I want to insert values(from table SIC K) into table SICMapping Table with the help of first table(SOL_K)(mapped rule)
Required Result SIC_Mapping Table
The output will be come like this.
A B C D — Columns Name
NULL MANOJ Kamal Micky ---- Came based on defined Mapping Rule

What's your database version?
That's a funny requirement.
How about :
select case sol.a
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as a
     , case sol.b
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as b
     , case sol.c
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as c
     , case sol.d
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as d
from sol_k sol, sic_k sic
;XQuery can do the trick too :
SQL> SELECT *
2 FROM XMLTable(
3   'for $i in ora:view("SIC_K")/ROW
4    return element r {
5     for $j in ora:view("SOL_K")/ROW/child::*
6     return element {name($j)} {$i/child::*[name()=$j]/text()}
7    }'
8   columns
9     a varchar2(30) path 'A'
10   , b varchar2(30) path 'B'
11   , c varchar2(30) path 'C'
12   , d varchar2(30) path 'D'
13 );
A          B          C          D
           MANOJ      Kamal      Micky
Edited by: odie_63 on 29 juin 2011 22:07

What are mapping rules in sap xi/pi ?

hi experts
what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .

>
praveen.tecnics wrote:
> hi experts
>
> what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .
to map special characters you need to use an element called CDATA in your mapping
a special character causes an error....as XI wont be able to read it (as it is not in a proper XML format)...so to parse this character through XI without causing an eror use the CDATA....just make a search on SDN and you will find the proper use of it....
For your info: http://www.w3schools.com/XML/xml_cdata.asp
Regards,
Abhishek.
Edited by: abhishek salvi on May 20, 2009 8:52 AM

Selectively executing a mapping rule based on a variable value

Hi,
I have written a mapping rule in the following format.
case #time_unit when 'quarter' then
logic1
when 'month' then
logic2
end
In logic1, logic2 i again have nested case statements. Variable time_unit will have a static value hard-coded given (quarter/month) by user before execution.
So Variable time_unit need not be checked for each row that gets transformed. It hits the performance.
I want either logic1 or logic2 to be substituted dynamically in the mapping rule window based on the variable value.
I cannot go for 2 seperate interfaces. How can I achieve this in ODI.
Please help me.
Thanks!!

Sarah,
I'm not aware of doing other than BPM. If you want the BPM Steps, Please refer below
Step 1 : Receive
Step 2 : Transformation
Step 3 : Send (Syncronous call to the target system)
Step 4 : Switch(Check the Payload value as per your reqmt)
Step 5 : Transformation(Switch : False ,If the payload value is not ERROR)
Step 6 : What you wanna do ( Switch :True)
If you want more technically, then let me know the source and target systems, I will help you to design
the complete flow.
Best Regards,
raj.

CGI map file questions, help !!!

I am trying to use the CGI map file to open web reports. I got two questions at this time.
1. How to refresh the report to reflect resent edits ? I used the CGI map to open a report. Later, I made some edits to the report and opened it again. However, the browser showed the report before the edit. I had to save the report to different file name and edited the key in the map file to show the edited report. This should not be the right way.
2. How to open a report on a separated screen which is on top of the original one ?
Any suggestions? Thanks!
null

Hi Kate.
As far as a find and replace tool is concerned, most of us
here prefer using some tool such as FAR or BkReplacem as they offer
more features to help in this kind of scenario. The simple answer
is however that these tools, as indeed does the inbuilt tool, bases
it's search on the HTML. Therefore if there are specific instances
of HTML strings you will have to analyse carefully them before you
replace anything. It sounds like you are already some down down
this line. Take a backup of your project and test out your theory.
As far as your map file question is concerned, you can safely
reimport your map file PROVIDED that no changes have been made to
the mapids in the meantime. Personally I wouldn't do this unless
you are 100% sure of this. If it is a case of having 100s of topics
that are not mapped and never have been but could be, I'd just
create a new map file and map away.

How to Insert data in 3 table without use of join 1table mapped rule define

1.Table SOL_K
A B C D – Columns Name
C D A B –Coulmns Values Defined (Rule --- Defined)
2.SECOND table SIC_K
SIC_ K
A B C D
Kamal Micky NULL MANOJ
3 Table SIC_Mapping
Same Columns A B C D based On Table SOL_K defined rule
I want to insert values(from table SIC K) into table SICMapping Table with the help of first table(SOL_K)(mapped rule)
Required Result SIC_Mapping Table
The output will be come like this.
A B C D — Columns Name
NULL MANOJ Kamal Micky ---- Came based on defined Mapping Rule

This is the forum for issues with the SQL Developer tool. You will get better answers in the SQL and PL/SQL forum.

UDF for this mapping rule

Hi Friends,
I have one difficult issue which have one mapping rule to write user defined function. I am sending mapping rule Please give me java coding to create udf for this mapping rule which is following below:
CRFT.COSTR = M_ORD_01 and
CRFT.CRID = CRHE.CRID and
CRFV.FTNO = CRFT.FTNO and
CRFV.ATNAM = ZPPI_ORDER_SCHED_EN_DATE
And
CRFT.COSTR = M_ORD_01 and
CRFT.CRID = CRHE.CRID and
CRFV.FTNO = CRFT.FTNO and
CRFV.ATNAM = ZPPI_ORDER_SCHED_EN_TIME
From ATWRT of ZPPI_ORDER_SCHED_EN DATE+ ATWRT of ZPPIORDER_SCHED_EN_TIME
In format yyyy-MM-ddTHH:mm:ss
using this mapping rule, ATWART field can map with target field "End Time" i think.
Actually source field is CALCULATE but this field is not in Source structure
target field is "End Time" this field is in Target Structure.
I will wait for ur response
Thanks adn regards
Sai

Hi Jagadish,
This RFC is CONTROL_RECIPE_DOWNLOAD
in this RFC, i want to map ATWRT field to Target field "End Time" with mapping rule which i had already given.
In Graphical mapping, i am doing . but i can not get it because mapping condition is difficult. if you have any idea in graphical mapping give me early
before that i have to give explantion about this is date value and time value passed through this ATWRT field as different records.
i am doing as a condition ie first i have taken date condition. from that condition, first two fields CRFT.COSTER and M_ORD_01 has given to "equals" funtion like that have done remaining fileds then the output of those "equals" functions given to "and" functions finally i get one output of "and" function. while sending DATE values from RFC this output of "and " function.
Like this, for Time condtion i have done mapping same way and giving a TIME values from RFC as Second record then output of this "and" function while sending second record with time value.
here mainly i am getting problem is .....
here i am taking source field ATWRT( in this field i am sending date format adn time format as different records) with the outputs of the mapping conditons as input vaules of another function. i dont have any idea for another function why because is first date record should be wait until the time record comes in this function.after then both vaules should concat .
now here whenever you send date value through this field ATWRT as first record and after satishfy the date condition form mapping rule, The date value of ATWRT should go to input of concat function. next i will send time value like date value through ATWRT as second record . It should go to another input of concat function. Then here both date value and time value concat with T and should be come output in the format yyyy-MM-ddTHH:mm:ss and this will go to Target field "End Time".
I will be wait for ur possitive reply
thanks for giving response
Thanks adn regards
sai

DN mapping rule problem

Hi, all.
Here is problem - i try to replicate entry from Active Directory connector view
dn: cn=user, ou=123,ou=bank,o=ADCView to MetaView entry
dn: cn=user, ou=345,ou=internal users,o=Meta
I have DN mapping rule:
Selection criteria: (%objectclass%^person) and (%dn%^bank)
Distinguished Name Construction:
cn=%cn%,ou=345,ou=internal users
This is not work!
In the debug log i can see that selection criteria is False. After some investigation i have found, that attributes %dn%, %cv.dn%, %entrydn%, %cv.entrydn% are empty or does not present at all !
So, to construct my mapping rule i need the entry`s dn, where i can find it?
Entry objectclass is inetorgperson.
Thanks, Ivan V. Melekhin

r u using the AD specific or Default schema?
Cant u simply put the selection criteria as "Present" instead of "Bank" - of course since you say that dn is not available we need to see which field should provide the info.

No document type defined in mapping rule

Hi,
Information on document type is need to be loaded from SAP R/3 to BCS for reporting purpose. Customised doc type with assigned role - subassignment already defined. Problem is i still don't see the document type (fiels) for selection in mapping rule (under load from data stream).
Any input would be appreciated. Thanks.
Regards, Renee

Due to reporting requirement, there are certain GLs need to be filter futher by doc type. As long as the document type is successfully extracted from SAP R/3 to BW BCS and filtering is defined in BE Analyzer, i don't need to display it in the report.
Anyway, customised document type already created and doc type can be extracted from SAP R/3. tq

Mapping rule

Hi,
i have one issue on mapping rule. Please give me solution for the below mapping rule.
Remove leading +67(0) to leave just 0
thanks in advance
sai

Hi Sai,
You can use the function formatNum for your requirment.
Thanks and Regards,
Sanjeev.
PS: Award points if helpful

Basic question: Can OID map LDAP query to custom SQL query?

Hi all,
I have custom data in my Oracle Database and I wat to give them
LDAP interface. Is it possible to use OID to achieve this or OID
is for other purposes?
To be more specific: I have schema MYSCHEMA and table
MYSCHEMA.MYTABLE. Is it possible to configure OID to select from MYSCHEMA.MYTABLE for specific LDAP queries? And the same for update queries? Is there some OID manager console to map LDAP queries against Oracle tables and views?
Thanx for any suggestions,
Rob

Rob,
take a look at the Directory Integration Platform. We provide synchronization of data from an DB tables to OID.
see "Synchronization with Relational Database Tables" http://download-west.oracle.com/docs/cd/B14099_14/idmanage.1012/b14085/odip_db.htm#i1042820
another option could be to use the OID Plugin framework together with a PLSQL procedure to access the DB data
http://download-west.oracle.com/docs/cd/B14099_14/idmanage.1012/b14087/svrplgin.htm#i741028
regards,
--Olaf

OID: Matching rule where clause is null

Hi All,
I've installed OIM 11.1.1.5.0 BP02 with OID connector 9.0.4.14. I am able to provision to OID and to run the "OID User Target Recon" scheduled task successfully. However, when I run the "OID User Trusted Recon" scheduled task, I get the error below. Does anyone know why this error is occurring and how to solve it?
[2012-05-15T22:55:11.791+02:00] [oim_server1] [NOTIFICATION] [IAM-5010000] [oracle.iam.reconciliation.impl] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] Generic Information: ignoreEvent Input Data : {Telephone=, Organization=Xellerate Users, Location=, Preferred Language=, Middle Name=, Xellerate Type=End-User Administrator, Title=, User ID=COETZETH, Manager ID=, Container DN=cn=Users, ssouid=, Status=Active, orclGuid=BA2694539E2C432F852460915924D067, [email protected], modifytimestamp=20120515192927z, Common Name=COETZETH, Role=Consultant, Server Name=OID IT Resource, TimeZone=, Department=, Last Name=Coetzee, First Name=Theuns} dateFormat : yyyy/MM/dd HH:mm:ss z
[2012-05-15T22:55:11.792+02:00] [oim_server1] [NOTIFICATION] [IAM-5010000] [oracle.iam.reconciliation.impl.config] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] Generic Information: Xellerate User from cache
[2012-05-15T22:55:11.792+02:00] [oim_server1] [ERROR] [IAM-5010000] [oracle.iam.reconciliation.impl] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] Generic Information: {0}[[
oracle.iam.reconciliation.exception.ReconciliationException: Matching rule where clause is null
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.getMatchingRule(ReconOperationsServiceImpl.java:490)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:390)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:355)
at Thor.API.Operations.tcReconciliationOperationsIntfEJB.ignoreEventx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1849.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy372.ignoreEventx(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.ignoreEventx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1848.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy169.ignoreEventx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1847.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy356.ignoreEventx(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsIntfDelegate.ignoreEvent(Unknown Source)
at com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation.reconcileUser(Unknown Source)
at com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation.processRecord(Unknown Source)
at com.thortech.xl.integration.OID.util.tcUtilLDAPOperations.pagingReconSearch(Unknown Source)
at com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation.doReconSearch(Unknown Source)
at com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation.processChange(Unknown Source)
at com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:384)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
at sun.reflect.GeneratedMethodAccessor565.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
[2012-05-15T22:55:11.794+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] ====================================================
[2012-05-15T22:55:11.794+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliationException when reconciling COETZETH
[2012-05-15T22:55:11.795+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] ====================================================[[
[2012-05-15T22:55:11.795+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] ====================================================
[2012-05-15T22:55:11.795+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] Exception in OID:tcTskOIDUserReconciliation:reconcileUser() oracle.iam.reconciliation.exception.ReconciliationException: Matching rule where clause is null
[2012-05-15T22:55:11.796+02:00] [oim_server1] [ERROR] [] [XL_INTG.OID] [tid: OIMQuartzScheduler_Worker-4] [userId: oiminternal] [ecid: 0000JTHLa8WBp20LVyCCyc1FgcIi000002,0] [APP: oim#11.1.1.3.0] ====================================================

user10233157 wrote:
Could anyone please explain to me how reconciliation and the various design console forms in OIM fit together? I am struggling to understand how resource objects, reconciliation fields, reconciliation action rules, reconciliation field mappings and reconcilaition rules all fit together... As for my original question, I have installed the OID connector and not made any modifications. I expected to see users created in OIM when running the trusted recon task.... When I run the target recon task existing users are associated with accounts in OID (as expected).Most times with OIM, following the documentation will not work. It requires knowledge of the product to find the missed steps, or missed pieces. You really need to get a baseline skill set with the product either through the Oracle By Examples or taking an Oracle University course. You are basically asking the community for all the answers but you haven't done your part.
-Kevin

Unbound Map, architecture question

Hey guys,
I have the following question. The core of our system is a singleton which
maintains a Map of String->Object bindings. This is a relatively small Map,
hardly ever over 20 objects. Now I want to store this Map in the database.
The Objects in the Map are objects in the database already, however the
singleton itself shouldn't be in the database. The Map is only bound to the
singleton. No other object can get to it directly. How can I model this?
Greetings,
Martin van Dijken

A little bit of everything :)
Martin van Dijken wrote:
Think I'll go for the Object method. Don't really like the singleton in
database method.
Thanks.
BTW, isn't it around midnight on the east coast right now? Are you a
european employee or just that loyal( /dumb;) )?
I see. I personally would recommend enforcing at load time if that is
best for you. Alternatively, you could of course store each row as its
own app-id PC with the singleton loading from the extent instances of
key-oid pair. I guess it depends on how often the state of the map
changes (each row as currently built doesn't have opt-locking
capabilities), whether app-id makes sense for your map rows and how much
state management you want in your singleton.
On second thought, my leaning is towards the latter idea but I think
both have their strengths and weaknesses.
Martin van Dijken wrote:
Here's the idea:
We have a system of objects. These objects of course have their own ids.
Now
in our HTML at some points we have places where we want to open 1specific
object. However if we put the id at that place, and someone deleted our
object, we'd be lost. So, instead of putting the id of an application inthe
HTML, we place a String in the HTML. Through a simple web-interface it's
possible to alter to what object the String points. Then the firstobject
can safely be deleted. This simple interface also allows the creation ofnew
keys.
Now in our current system, these string-keys and ids are simply storedin
one table.
|Table Mapping |
------------------+
|key |objectid |
------------------+
When the singleton is loaded, it retrieves the entire Map and it is theonly
object that can edit anything in the map.
So what you're suggesting is storing the Singleton in the database andthen
manually guaranteeing it's a singleton at load time?
Martin
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com

AD OID mapping rule questions

Similar Messages

Maybe you are looking for