Adaptive Agent won't install for TP1

ZCM 11, TP1
I'm using a clean Windows XP SP2 Pro machine. It's not patched or fully updated.
I tried using the 300 MB agent complete dot net install (I ASSUME that's the one that has the .net 3.5.1 that's required)
I get a DOS box that pops up and this error:
Exiting with error code 3010
hit any key to continue.
Short of not having the .net 3.5.1 on the machine to begin with, I don't see any other system requirements for the workstation.

Strange, ran it a second time and then it worked. Perhaps it was still extracting the 300 MB file or something.

Similar Messages

VMM 2012 R2: error 410 / 0x80070001 when adding a new Hyper-V host. VMM Agent won't install automatically (status 1603)

I have several Windows Server 2012 R2 hosts. The OS is freshly installed, no roles/3d party software besides Hyper-V role). I also have a freshly installed VMM 2012 R2 server. They all are in the same AD domain. I want to manage those Hyper-V hosts
with this VMM instance, but I have troubles connecting those hosts to VMM.
Whenever I try to add a Hyper-V host in the VMM console, the process is stopped almost immediately after it starts. The failing step is "1.2 Install Virtual Machine Manager Agent". The final error message is as follows:
Error (410)
Agent installation failed on XXX.
Incorrect function (0x80070001)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
If I try to install the agent manually copied from the VMM host (C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\agents\amd64\3.2.7634.0
as of now) by just clicking on its MSI file in Windows Explorer (and agreeing to the Windows prompt to run it with elevated privileges), the installation fails as well with "Installation success or error status: 1603." in the
server Application log.
The only way I found to install the agent is to run the installation from command prompt with elevated privileges. In this case the installation finishes successfully, and I can add the host to VMM by marking the "Reassociate the host" checkbox
in the VMM wizard.
Why is it so? Isn't the agent supposed to install without manual intervention? As I recall, I had no such problem with previous versions of Windows Server and VMM.
Evgeniy Lotosh
MSCE: Server infractructire, MCSE: Messaging

I brought up the share because it is off by default with Hyper-V Server as well as a Core installation. Regardless of the Firewall policy involved.
Maybe, but I don't work with pure Hyper-V and Core servers. I have a full-fledged Windows Server 2012 R2 Datacenter.
You're correct that File Server role is not enabled by default, this is my mistake. I open SMB-IN port manually (with the help of a group policy), and Windows considers it to be am equivalent of the enabled File Server role. Nonetheless, ADMIN$ share is
always accessible in my environment (and without it, for example, I wouldn't be able to remotely install things like SCOM Agent which installs without a glitch). Just in case I manually installed the File Server role, and it didn't help.
What you say about multihomed servers is interesting. The servers in question do have multiple network interfaces, but at the time I tried to install the VMM Agent only one of them (a designated host management / network access interface) had a real IP address.
Two other interfaces were non-configured (I apply a virtual switch configuration after the VMM Agent is installed). Just in case I disabled them when tried to install the VMM Agent remotely on the last host, and the installation still failed immediately
after start. Anyways, after the VMM Agent is installed manually the host can be normally re-associated with VMM, so it's doubtful that I have a network issue.
And, of course, there is no 3d-party software on the hosts (no antiviruses/firewalls in particular) except the EMC Unisphere Host Agent (a piece of software necessary for connecting a host to an EMC storage system) and networking drivers. Actually,
this is a pure Microsoft environment.
So I still believe that is has something to do with the Windows Installer inability to configure Windows Firewall policy after being invoked from Windows Explorer with a double-click on a MSI file. But I don't know how to strictly confirm it.
Evgeniy Lotosh
MSCE: Server infractructire, MCSE: Messaging

Firefox won't install for all users in Windows 8.1; only installs for administrator

Since moving to Windows 8.1, I have been unable to install Firefox for multiple users on this laptop. Firefox installs only for the Administrator (me), and does not appear on any other user account. When I try installing from one of the other user accounts (after entering my administrator password), it simply won't install.

Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

Flash Player won't install for my firefox...

I have the latest version of firefox. I had to uninstall flash because it wasn't recent. On the flash page, I was following the instructions for the uninstall, which went fine. Now I am trying to follow instructions for the re-install, and it's not working. I click download, and then click "run" and then say "yes" when it asks to make changes to the computer. (I'm an administrator) Then the flash box comes up and it has like a preparing to install bar that loads fine, but then it gets stuck on the "retrieving install" and the bar just sits at zero percent until a message comes up that an error occured. It will stay up until I finally just exit out of it, and then it'll take me to a troubleshooting flash page. The trouble shooting page doesn't help at all, because apparently this normally isn't a problem! Does anyone know what to do?

The above link is for the ActiveX installer (Internet Explorer).
Use the appropriate download links in http://forums.adobe.com/thread/909550
If you are on a 64-bit system, use the 64-bit installer(s); you will then also be able to use Flash under the 64-bit version of Firefox: Waterfox.

CS6 Beta won't install for me, either.

Similar but different to others. Here's what I got (three times now):
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 16 error(s), 0 warning(s)
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 21)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 21)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 11)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 11)
----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 3)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 3)
----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 5)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 5)
----------- Payload: {D6EB6A94-D753-4C22-AD43-4ACB04D4B7B8} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 2260)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2260)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeColorCommonSetCMYK CS6: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS6: Install failed
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS6: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB CS6: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
I've tried fixing permissions and restarting, as I saw worked for someone on another thread, but no dice -- same issues. I'm on Snow Leopard 10.6.8. I do have some custom ColorSync profiles. Can they be causing this? It concerns me, because I had planned on buying it when it's released, but not if it's got issues!

I'm in! The Terminal command worked. I guess the problem must've been my custom ColorSync profiles, huh? Because what that command did was delete them, leaving an empty folder. Good thing I had them backed up. It's still empty, btw, even after the install.
Funny thing is, when the installer finished, I got the same failure window I posted up top. Here was the Error Summary:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 0 warning(s)
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 12)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 12)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeColorCommonSetCMYK CS6: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB CS6: Install failed
… so I figured I had gotten the same result. But the Photoshop CS6 folder had the usual folderful of files, and when I tried launching the program, it worked! THANK YOU Pattie and Ashutosh!
Now, one more dumb question (or two), that I could probably find easy enough, but since I've got your ear… Is this a 30-day trial or what? And is there a launch day set yet, when CS6 goes on sale? And, will Illustrator CS6 launch at the same time? And is there a Beta for that? And… well, that's enough.
Thanks again.

7.7 won't install for me

I'm assuming I need to install the 7.7 software because the CD my Mini I-pod came with in 2005 isn't working and I need my computer to recognize my I-pod. 7.7 is the softwware that would replace the CD the Ipod came with? Correct?
I tried installing it a dozen times but it keeps saying
"Installer Completed"-"The installer encountered errors before I-Tunes could be configured" "Try later".
IS there another piece of software on line I can download or can I get another CD somewhere?
Oddly enough in my quicktime Realplayer it says it recognizes the device and it also shows the Ipod is in the Real Time Player as my device but I'm not real good with computers and have no idea if one issue is related to the other.
I also looked in the folder that lets you install and uninstall programs but I don't see the Apple Ipod (Apple Itunes) which is why I assume I need a new CD or online piece of software that will work for me.
Please help!!
Thanks so much
andy

You might want to post in the installing iTunes for Windows forum and give full details of the error(s) you are seeing.
http://discussions.apple.com/forum.jspa?forumID=792

Createjs won't install for Flash 13

As you can see from the screenshot, below, I was unable to install the Toolkit for CreateJS [ver 1.2, released 3/28/2013]. I recently upgraded to Flash 13, which is, apparently, the reason the Extention Manager is complaining. Is this what it looks like: the CreateJS Toolkit is out of sync with the latest release of Flash? Or am I missing something? [I'm running Flash 13 on Win 7 64bit]
Update: I contacted someone at customer support and they suggested that the problem might be that I was using Extension Manager CS6 and that I upgrade to Extension Manager CC. I tried that, rebooted (just in case) and then tried the download again -- same error message!
Message was edited by: GraphiteFingers

Toolkit for CreateJS has been integrated into Flash CC. You can find it under "Window" dropdown menu.

Flash player won't install for adminstrator, but will for child accounts

I use the Family Safety on our computer. We have accounts for our child, self (as administrator), and guests. Flash player shows as installed and works on the child and guest accounts. But, it does not appear as installed on my administrator account. We use McAfee for protection, but that doesn't seem to be the problem. I have tried installing and uninstalling several times. I have tried installing using internet explorer and firefox. We have windows 7. I don't know what to do. It used to be installed.

Administrator account: there is no flash player listed in the Manage Add-ons list. Adobe Shockwave Flash Object is enabled. When I choose to look at all add ons, ActiveX shows up and is also enabled.
Standard Account: there is no flash player listed in the manage add-ons list. Adobe shockwave flash object and activeX are both enabled.
I looked in the "all add ons list" for both accounts, and there is not flash player plug in. But flash player works in the standard account. Am I missing a plugin?
Just to try it I enabled a google toolbar. Flash player still doesn't work.
Thank you.

Driver won't install for USB 2.0 controller in Thunderbolt chassis

I have a Thunderbolt to PCIe chassis attached to my MacBook Air. It has three PCIe slots available. Two of those slots are populated with USB 3.0 cards and these are working correctly. The third slot has a USB 2.0 card installed. This card does not work correctly. Although the card is reported as present and identified as having USB controllers on it, the drivers are not loaded so the USB ports are not visible to the Air. Also there are errors reported in /var/log/system.log which I believe are kIOReturnUnsupported from the EHCI driver. Is there a workaround for this?

No, it is not a chassis driver problem. In fact the chassis does not need additional drivers at all. There are the USB 3.0 cards in the chassis and they are functioning fine using AppleUSBXHCI.kext which is already enabled for tunneling over Thunderbolt. AppleUSBEHCI.kext is also already enabled for tunneling and should be OK for the USB 2.0 card but as you can see from the log it is throwing an error about a function not being supported.
Unfortunately there are no OS/X drivers for this USB 2.0 card however I believe (but have not yet verified for myself) that it will work when directly connected to PCIe eg in a Mac Pro. So the OS/X drivers do support it. It seems to me that the drivers support the card and are enabled for tunneling over Thunderbolt but fail for some strange reason.
FWIW I started testing on 10.8.5 and had the same symptoms.

Drivers won't install for webcam 3

my camera was working perfect but i had to reinstall windows. since re-installing, i get an error each time i try to install the camera drivers. I originall received an error that it couldnt find the rundll32.exe file in c:\windows. I found this file in c:\windows\system32, so i copied it over, but it didnt help. Then this is the error...
Error in sysdm.cp
Missing entry:Install-device_RunDLL
i tried the advice provided in the knowledge base area by disabling the System files(except Windows) and it didnt help

I know it's been a while since you posted your message, but I just attempted to get my WebCam 3 to work again (after giving up a LONG time ago). Apparently you had/have the same problem I've had.
Did you ever resolve it's

Hung installing Adaptative Agent in RHEL Virtualized

Hello,
I have a RHEL virtualized over Citrix xen, when I try to deploy de Zenworks Adaptative Agent, It is installed correctly but the task hang up when the device try to do the registration step. Checking the logs I can see a message that say "Device OS target not supported!".
I am thinking that when the server reply to the Zenworks server, it show itshelf like a kernel version "2.6.18-194.el5xen" and not recognize the os version.
Is this possible??
Thanks in advance,
Ricard Alias

In the adaptative client logs I can see:
[root@hongkong LocalStore]# tail -f /var/opt/novell/zenworks/logs/LocalStore/zmd-messages.log
[Debug] [10/20/2011 08:42:14.450] [] [5778] [ZenworksAgent] [34] [WebServerMonitor] [Checking if web server is responding] [] []
[Debug] [10/20/2011 08:42:14.453] [] [5778] [ZenworksAgent] [34] [WebServerMonitor] [Successfully pinged the agent web server at port: 7628] [] []
[Debug] [10/20/2011 08:42:19.746] [] [5778] [ZenworksAgent] [51] [ConfigManager] [Could not find any registered config handlers.] [] []
[Debug] [10/20/2011 08:42:19.747] [] [5778] [ZenworksAgent] [51] [ReportAnalyzeModule] [CollectionPointEnabled config value: null] [] []
[Debug] [10/20/2011 08:42:19.747] [] [5778] [ZenworksAgent] [51] [ReportAnalyzeModule] [IsCollectionPoint returning: false] [] []
[Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [TESS-JobExecutor] [Executing job: DEFAULT.3f965b73-479c-4eb1-bbd6-2bb0ccee1dc4, In Blackout: false] [] []
[Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [MessageSender] [CentralStoreLocation :/var/opt/novell/zenworks/logs/CentralStore] [] []
[Debug] [10/20/2011 08:42:24.884] [] [5778] [ZenworksAgent] [36] [MessageSender] [Sorted Files] [] []
[Debug] [10/20/2011 08:42:25.404] [] [5778] [ZenworksAgent] [37] [TESS-JobExecutor] [Executing job: DEFAULT.376e17a2-0204-44fb-8cf5-89e35a8ea42d, In Blackout: false] [] []
[Debug] [10/20/2011 08:42:25.455] [] [5778] [ZenworksAgent] [37] [ExternalCmd] [Executed command (sh, -c, export LANG=en_US.UTF-8;/sbin/ifconfig) : exit value = 0, error = none.] [] []
[Debug] [10/20/2011 08:42:25.456] [] [5778] [ZenworksAgent] [37] [LinuxSystemUtils.BasicHWInfo] [Adding Ip Address 192.168.160.56 for N/w Interface eth0] [] []
[Debug] [10/20/2011 08:42:25.457] [] [5778] [ZenworksAgent] [37] [NwIfInfoChangeDetectorByPolling] [Polling the network interfaces : time taken : 53 ms.] [] []
I tried to chage /etc/redhat-release by "rhel-5" and reinstall de agent with the same result.
Regards,
Ricard Alias
Originally Posted by craig_wilson
The ostargets.XML file lists all of the supported operating systems.
It will try and find a matching sub-string there.
In my Server I see
Red Hat Enterprise Linux Server release 5
and
Red Hat Enterprise Linux Server release 6
I don't see a 5.5
Now, It don't know if 5.5 SHOULD match because of the substring notation
I don't know if it needs to be added to the supported list.
I don't know if it would need extra testing to be added to the supported
list.
I'm not enough of an Expert on Linux to make a sound judgement beyond
the details above.
On 10/19/2011 10:36 AM, ralias wrote:
>
> Hello Craig,
>
> I can see this:
>
> [root@hongkong ~]# cat /etc/redhat-release
> Red Hat Enterprise Linux Server release 5.5 (Tikanga)
>
> Thanks in advance,
> Ricard Alias
>
>
> craig_wilson;2147198 Wrote:
>> What is the value of /etc/redhat-release
>>
>>
>> On 10/19/2011 9:16 AM, ralias wrote:
>>>
>>> Hello,
>>>
>>> I have a RHEL virtualized over Citrix xen, when I try to deploy de
>>> Zenworks Adaptative Agent, It is installed correctly but the task
>> hang
>>> up when the device try to do the registration step. Checking the logs
>> I
>>> can see a message that say "Device OS target not supported!".
>>>
>>> I am thinking that when the server reply to the Zenworks server, it
>>> show itshelf like a kernel version "2.6.18-194.el5xen" and not
>> recognize
>>> the os version.
>>>
>>> Is this possible??
>>>
>>> Thanks in advance,
>>> Ricard Alias
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

KT4AM-V (7061 v 1.0) - Lan drivers won't install

Hi, Please help... I'v searched the internet high and wide and haven't come up with a solution yet !
Set up:
KT4AM-V (7061 v1.0) - bios upgraded to v1.2
Sempron 2400+
2 x 256MB DDR 400
40GB 7200 Maxtor
LG Combo CDRW/DVD
MSI TV ANYWERE
350W PS
Windows XP Media Center (w SP2)
Situation:
This is a brand new PC, fresh install of Media Center, pc works great EXCEPT that I can't get the Lan working.
1- used MSI driver disk - installed drivers ok, but device fails to start;
2- uninstalled, reinstalled drivers;
3- disabled/reenabled in BIOS;
4- downloaded new drivers from MSI;
5- manually searched for drivers;
was getting "network adapter no drivers are installed for this device"
then getting "please wait while the wizard installs the software" hang
now drivers show installed and operational but cant get internet, ipconfig won't release/renew...
Stuck... don't know where to go from here!
thanks in advance

Ok... Updated time....
Safe mode had no different results. PSU is good and shouldn't have any effect in this circumstance.
Now, I have reinstalled XP MC (with the lan disabled). Everything installed and works ok. I then reenabled the lan in the bios, loaded up, and once in windows got the "limited or no connectivity" message.
Checked the drivers: auto install driver is VIA compatible ethernet controller... so I tried to update the driver from the CD and it goes to install drivers for Rhine II Fast ethernet... and this is where it hangs up... it gives a gull green bar as if its about to finish and it stays on copying "fetnd5b.sys" thats as far as it gets.
I'll try removing the TV card and see if that helps... anyone else have ideas?
Cheers

CreativeCloud won't install with errorcode (1): Can't install CreativeCloud-Desktop

Yeah,, so it won't install for my trial, and I don't know what to do. Look at the title for the information the error-code gave me.

clean and then try installing per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

CC won't install

Recently purchased 5 seats of CC for my company, and have established myself as administrator. Have successfully deployed 4 licenses: 1 to myself and 3 to my staff. However, CC simply won't install for me. On my main machine, it made it through the CC desktop app and Acrobat XI, and then died on Photoshop ("patch failed to install, try back later"). On my secondary machine, made it through the desktop app and then 51% of Acrobat XI before stopping. Now install for Acrobat XI won't even initiate. As a side note, the dropdown from the desktop app on my secondary machine shows a mix of "Install" and "Try" options, when all options should be Install — I subscribed to the whole suite.
Is Adobe suffering server issues? Is something corrupted somewhere that I need to repair?

On edit of above: Additionally, the failed Acrobat installation has hosed my previous Acrobat 10 installation. Now it's insisting on my CS6 password -- which, when provided, it rejects!
Does Adobe know/care how intensely frustrating this is, and how it wrecks the credibility of Adobe's (greedy) subscription model?

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

Adaptive Agent won't install for TP1

Similar Messages

Maybe you are looking for