Adb not detecting Nook Color

I know there's another thread about this but since it didn't go anywhere...
adb never detects my Nook Color. I had it working in Fedora 15 but switched to Arch and haven't been able to get it working.
$ lsusb
Bus 004 Device 007: ID 2080:0002 Barnes & Noble NOOKcolor
$ dmesg
[36858.396242] usb 4-4: new high speed USB device number 7 using ehci_hcd
[36858.539784] scsi14 : usb-storage 4-4:1.0
[36859.539248] scsi 14:0:0:0: Direct-Access     B&N      Ebook Disk       0101 PQ: 0 ANSI: 2
[36859.539472] sd 14:0:0:0: Attached scsi generic sg5 type 0
[36859.540895] scsi 14:0:0:1: Direct-Access     B&N      Ebook Disk       0101 PQ: 0 ANSI: 2
[36859.540983] sd 14:0:0:1: Attached scsi generic sg6 type 0
[36859.551005] sd 14:0:0:0: [sde] Attached SCSI removable disk
[36859.552254] sd 14:0:0:1: [sdf] Attached SCSI removable disk
I have installed android-sdk, android-sdk-platform-tools, and android-udev from AUR.
I have even tried manually installing the official sdk/tools.
I have also tried running everything as root:
$ sudo adb start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ sudo adb devices
List of devices attached
(nothing...)
The udev rules for my device, from the android-udev AUR package are:
#      Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666", GROUP="adbusers"
This matches up with the lsusb output above.
In fact, if I add SYMLINK+="android_adb" to the udev rules and replug the device, the node is created.
$ ls -l /dev/android_adb
lrwxrwxrwx 1 root root 15 Sep  5 22:42 /dev/android_adb -> bus/usb/004/007
I guess udev isn't the problem since it should still show up as root.
Also, I do have USB debugging enabled on my device (and it notifies me when connected "USB debugging connected").
I really don't know what else to try.
Last edited by dewyatt (2011-09-06 02:54:02)

On my system:
[ 2646.189831] usb 2-2: new high speed USB device number 3 using ehci_hcd
[ 2646.662228] usbcore: registered new interface driver uas
[ 2646.693028] Initializing USB Mass Storage driver...
[ 2646.693487] scsi6 : usb-storage 2-2:1.0
[ 2646.693664] usbcore: registered new interface driver usb-storage
[ 2646.693667] USB Mass Storage support registered.
[ 2647.696488] scsi 6:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 2647.696974] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2647.701362] scsi 6:0:0:1: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 2647.701673] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 2647.706348] scsi 6:0:0:2: CD-ROM HTC Android Phone 0100 PQ: 0 ANSI: 2
[ 2647.713336] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2647.718332] sr1: scsi3-mmc drive: 0x/0x caddy
[ 2647.718583] sr 6:0:0:2: Attached scsi CD-ROM sr1
[ 2647.718739] sr 6:0:0:2: Attached scsi generic sg4 type 5
[ 2647.724351] sd 6:0:0:1: [sdc] Attached SCSI removable disk
ewaller@odin:~ 1002 %
But it does not load any modules

Similar Messages

  • HP Color LaserJet CP1217 is not detected by PC

    Hi
    I have a HP Color LaserJet CP1217 which I am trying to connect by USB to a new computer running Windows 8.
    When I first plugged the printer in the drivers were automatically detected and downloaded, and the printer was working.
    I then moved the printer to a different PC for another printing job. Also worked fine.
    When I brought the printer back to the new computer, the printing jobs were just getting stuck in the queue with an undescriptive error message.
    I tried various combinations of restarting the PC, uninstalling drivers, re-installing drivers, updating drivers, turning printer on and off, using the HP print and scan doctor.
    Using the HP print and scan doctor I am getting a message that the printer is not connected - though the USB cable is plugged in. I have tried different USB ports and a different USB wire but still the pc will not detect the printer.
    These same cables work fine when I try the printer with another computer so it is obviously some other issue.
    As the printer is more than five years old HP will not help over the phone. They recommend we buy a new one. But this one was working a few days ago!
    Help please.

    Hi
    Yes other USB devices work (USB drive,keyboard etc).
    Initially there was an error in the printing dialogue box but just said "error" with no other details.
    Since un-installing drivers and re-installing, no printer is detected, only the printer driver. The printer is on and plugged in. When I go to devices and printers and run 'add printer' command it does a search and comes up with nothing.
    Running windows 8.1, 64 bit.

  • Fax not detected,C​omm error, fax run test is all PASS,

    Hi Good Day! Im Using a HP color Laserjet Pro MFP M177fw. The Problem is sending fax messages. I do all the updates you need to installed. but the problem with my hp fax machine is still there specially i still receive a fax not detected issue,comm.error, but when i run the fax test run..the result is all PASS. especially the active tel.line,correcrt port on fax machine,tel line current test,dial tone..all the question and are PASS. The firmware is updated like..20140914. Please help me for this kind of problem. Thank You!

    Hi @ali_al , I can help you with the fax not being able to send faxes.
    Check these settings on the printer:
    Confirm the fax number:
    Go to setup, fax setup, advanced setup, confirm fax #.
    Turn off error correction:
    Go to setup, service, fax service, error correction and turn if off.
    Set the fax speed to medium:
    Go to setup, fax setup, advanced setup, fax speed and select medium.
    Turn off the private receive:
    Go to setup, fax setup, advanced setup, private receive. Turn it off.
    Test the fax.
    I have provided a document with some steps to try to see if that will resolve the issue.
    Cannot Send or Receive Faxes.
    Please provide the following information so I can assist you better.
    What type of connection do you have? (Analogue, DSL, Cable Modem)
    Are you using the 2 wire phone cable?
    Do you have distinctive ring set up on the line?
    Is there any voice mail set up?
    Do you have a answering machine? (Where is it connected to?)
    Where is the fax cable connected to? (modem, wall jack)
    Is there a phone also connected the printer?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Cinema Display not detected

    I got my 20" Cinema Display back from repair today (backlight problem) and now I can't get my MacBook Pro to detect that it's attached. While it was at the repair center, I used a CRT as a second monitor. So today, I just closed the MBP (didn't shut it off, which I think is what cause the problem), disconnected the CRT, connected the ACD and opened the MPB back up. Completely black screen, with the little LED on all the time.
    So, troubleshooting:
    - The MBP still detects the CRT
    - ACD is detected by both a G4 and G5
    - A different 20" ACD is ALSO not detected by my MBP
    - Reset NVRAM and SMC
    - Booted MBP in safe mode
    - Booted MBP from startup CD
    - Tried various resolutions while the CRT was connected, thinking maybe it was stuck on one that's not compatible with the ACD
    - Moved and recreated the com.apple.windowserver.* files
    I'm running 10.4.9 and here's what the graphics/displays info says, WITH the Cinema Display connected:
    ATI Radeon X1600:
    Chipset Model: ATY,RadeonX1600
    Type: Display
    Bus: PCIe
    VRAM (Total): 256 MB
    Vendor: ATI (0x1002)
    Device ID: 0x71c5
    Revision ID: 0x0000
    ROM Revision: 113-xxxxxx-086
    EFI Driver Version: 01.00.086
    Displays:
    Color LCD:
    Display Type: LCD
    Resolution: 1680 x 1050
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display:
    Status: No display connected
    Been messing with this for four hours, and I still have a blank display. Any other ideas? From one thread someone mentioned replacing the logic board fixed a similar problem.
    MacBook Pro   Mac OS X (10.4.9)  

    UPDATE:
    I just got back from my visit to a mac genius. Of course Murphy's law was in full effect! With my MBP connected to the cinema display in the Mac store, everything worked as it is supposed to.
    Well, I rush home thinking that maybe mine would now work - - no luck! He did suggest that I try connecting analog with the provided dvi-to-vga adapter. This suggestion DID work! BUT, I want my video digital! That is why even though I was happy with the iBook G4 that I bought last year, I wanted digital video + expanded desktop!
    I think I will make another reservation with the Mac Genius, but this time, bring my monitor. Will keep you posted...

  • Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
    That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
    Refresh & sesolution are the first things to look at.
    Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
    I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

  • Is there a way for me to watch my itunes movies that are on my iphone 4S on my Nook color tablet? Could I attatch them to do this?hone 4S

    Hi,
    I have an iphone 4S with movies from itunes that I have bought on it. I also have a nook color tablet 16gb. I have the nook app on my iphone also. My question is can I connect my iphone to my nook tablet to watch the itunes movies on a bigger screen, for example when I'm on a plane?  Hula and Netflix don't work without wireless or regular internet connection.
    Thanks for any ideas that might be out there!

    - You have had to have turned on the FindMyiPod feature (Settings>iCloud), wifi on and Location Services on.
    - By now the battery would be fully drained.
    - The SN will only allow you to identify the iPod as your if it is recovered.
    - Apple will not help
    Reporting a lost or stolen Apple product
    - Report to police and change the passwords for all accounts used on the iPod.

  • Could not detect Sound Blaster Audio Card on xp sp2 Sys

    I have Audigy Platinum and trying to install to a recently re-installed windows xp sp2 system. On my previous install everything was working fine and now I am looking to install the newest drivers and the error comes up [color="#ff3300">"could not detect Sound Blaster Audio Card on system". The strange thing is windows recognizes the card and will install it's drivers, but when I go to install the latest driver update I get the error. In addition, I also tried to run the install from my original disk.
    I also?un-installed the devices showing? in the windows device manager, then tried and the same error, I even tried it in safe mode. Any ideas?Thanks and Advance,Mikel

    Yes i think the real lesson here is not to buy creative,. i have the same problem with their junky card, so i guess ill just have to take buisness somewhere else. if you all do the same perhaps the threat of them going out of buisness will have them deal with their problems. if not atleast we saved others the headache of learning this lesson.

  • Displayport not detected

    Hi, since I upgraded my Macbook pro to Yosemite my rocketfish rk-ap305 mini displayport to hdmi adaptor (connected to my tv) is not detected. The display menu is basic: choice between display and color. My adaptor worked well before the upgrade. Thanks for any solution.

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • After scanning a lot, my printer says print cartriges missing or not detected

    on my C4240 all in one printer, my printer won't let me print after I scanned a lot of papers, It says print cartrige(s) missing or not detected.

    C4200 cartrige not detected .Blk or color , new or refilled makes no difference .I tried to remove the program and reinstall. Results the scanner work fine, the copier not  The message is cartrige (s) not detected . Window 7Gateway PC. I was working before with no problems .      hsynut

  • Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

    After running the recovery (Vista 32) from the recovery partition my computer no longer sees the Wifi card installed.
    There is nothing in device manager, the hp wireless wizard doesn't detect anything. I went to HP's site and download the 3 different wifi drivers that it would be and installed them. I can not rememeber what the adapter was.,. thats a problem.
    This system was a refurbed unit when I bought it, if the salesman was correct it was recalled because of a faulty Wireless card. I wonder if they replaced the card with one that the restore partition installation could not detect.
    Any ideas?

    first make sure the wifi is turned on either by a switch located on the front of keyboard or a soft touch icon near the display.. if you have the soft touch make sure it's blue in color if its orange its turned off

  • Built in iSight Not Detected

    Hi,
    Having an issue with my MacBook Pro where in iMovie, I am not able to select my built in iSight as an input source to record with (Camera Not Detected). Photo Booth works fine, and the issue recurs in a clean account.
    I have no problem with this software on both my MacBook (2008) and iMac (2006), running the same OS version. I'm assuming this has something to do with the new hardware.
    Apple Support claims that the software is incompatible with Snow Leopard, but is working fine otherwise. Just wondering if anyone here has had the same problem and has been able to shed some light as to why this occurs/ how to fix it.
    Thanks!

    iMacOwner wrote:
    Hi,
    Having an issue with my MacBook Pro where in iMovie, I am not able to select my built in iSight as an input source to record with (Camera Not Detected). Photo Booth works fine, and the issue recurs in a clean account.
    I have no problem with this software on both my MacBook (2008) and iMac (2006), running the same OS version. I'm assuming this has something to do with the new hardware.
    Apple Support claims that the software is incompatible with Snow Leopard, but is working fine otherwise. Just wondering if anyone here has had the same problem and has been able to shed some light as to why this occurs/ how to fix it.
    Thanks!
    I do not have the problem and I cannot shed any light as to "why" you have the problem, but here are my best thoughts based on your info.
    I often use iM6HD for quick iSight clips on MacPro using the iSight built into my LED Cinema Display. iM6HD works as well with my MacBook Pro. Both run SL.
    I sometimes see strange color blinks in the preview window *before I begin to record*, but there is no problem while I am recording.
    My inbuilt iSights shows up in the camera selection button just as it did in previous Mac OSs.
    Have you selected "iSight" when you create your new movie project?
    Are you observing the prohibition against running another camera apps when you open iMovie?
      http://support.apple.com/kb/HT3095
    Have you restarted the Mac?
    I see you have tested in a "clean account". If that means a new user account, my only other thought would be whether a clean install of the OS with NO other software additions might give any insight?
    If nothing helps, you may be right that there is something special about the new hardware.
    If that is the case, why not capture your iSight video in SL's QuickTimeX? Then import the clip into whichever iMovie/editor you like for editing.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • PC does not detect connection of Zen V P

    <font face="Comic Sans MS" color="#000066"]I got the Zen V plus (GB) as a gift for Christmas and am having problems. Every time?I connect the device the [color="#339933">Zen V Series Media Explorer programe does not detect the device as connected. If?I change the settings to removable disc, [color="#339933">it is deteced by the PC but not the upload programe. If i right click on a file in [color="#339933">"my documents" and go to send to removable disc it does send, but doesn't come up on my MP3.<font face="Comic Sans MS" color="#000066"]?<font face="Comic Sans MS" color="#000066"]?<font face="Comic Sans MS" color="#000066"]Please help!!!!<font face="Comic Sans MS" color="#000066"]?<font face="Comic Sans MS" color="#000066"]thank you xx

    I have the same problem. I didn't want to use the Creative s/w to synchronize so I connected it via a USB 2.0 port on a Dell 200FP monitor. XP (SP2) recognized it and prompted me to synch with WMP, MediaMonkey, or Take no action. I took no action. It recharged just fine. I downloaded the firmware update file from the Creative site. I ran the file and it didn't recognize the Zen. Many unplugs and re-plugs. XP always sees it (but not with a dri've letter), but Creative and MM don't. I can also see it in the Device Manager. Thinking there might be necessary drivers, I installed the Creative Media Explorer from the CD. No change. It doesn't recognize it either. I've tried a monitor USB port, a front USB port, and a back USB port. I set it to a 52M removeable disk. Windows now sees it as a dri've and the Creative Removable Dri've Manager sees it. And, of course, MM sees it now as a removeable dri've. But I want it to see it as an MP3 player. I'd also like to update its firmware, because I think MM requires the the Plays-for-Sure update. No replies to the other messages in 5 days? Does Creative read this forum? I'll try to call Support, but are they open on New Year's Eve? Sigh.Message Edited by skst on 2-3-200604:0 PM

  • Can't get ADE files to open on my Nook Color

    I have now spent several hours googling this problem, trying every solution I've found, and still can not resolve the problem. When I try to open files on my Nook Color I get the message that the user is not authorized. I have authorized my computer via ADE but when I open ADE it never sees my Nook Color even though my computer sees it. I read the advice about deleting the ADE files on my Nook but I don't see any ADE files there. I also read Adobe's advice to authorize the Nook to the same Adobe account but I have no idea how you do that. I don't have anywhere on my Nook Color to link to an Adobe account. This has been extremely frustrating as the number one reason I chose the Nook Color was so that I could buy through independent book sellers, which I can't do if ADE isn't working.
    TIA!

    Same exact problem, only I have located my ADE files on my nook and deleted them. I get this:
    9780393069204-ePub.v7.epub:
    Document is licensed for a different user account
    What user account might that be? This is a brand new out-of-the-box ereader and a brand new Adobe account. This error message is crap. I'm uninstalling and moving on with my life. I was much happier before ADE.

  • ADE shuts down when I connect my nook color.

    A message appears saying ADE has stopped working.  The problem details are as follows: 
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             digitaleditions.exe
      Application Version:                           9.0.1131.27
      Application Timestamp:                     4b51047f
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                  4ce7b96e
      Exception Code:                                  c0000005
      Exception Offset:                                0005d07e
      OS Version:                                          6.1.7601.2.1.0.256.1
      Locale ID:                                             1033
      Additional Information 1:                  07e8
      Additional Information 2:                  07e87bcdb70633819dbc9df994bb31a7
      Additional Information 3:                  29c0
      Additional Information 4:                  29c03bce7fbcde38a100f96526487d60
    I have deactivated and deauthorized and uninstalled ADE from my computer then cleared the recycle bin.  Reinstalled ADE and have exactly the same problem.  My OS is Windows 7.   Have been using ADE on this computer and the same Nook Color for almost a year with no issues.  What happened?  Can anybody help?  Please .........
    Thanks,
    Margaret

    Margaret, I used to be able to read these error messages and decode them.
    That was before Win7, however.  But what I think has happened is that
    something in Win7 isn't set correctly, and it's not able to process the
    code that is coming from ADE.  Microsoft does updates all the time, so if
    it is a problem with Win7, it could have been caused by one of those
    updates.  I'd contact Microsoft and read or send them the text and see if
    they can help you with it.  I doubt that uninstalling/reinstalling ADE will
    do any good because the error is coming from a Win7 system module.
    ===============

  • [FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

    PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
    SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
    [color="#ff0000"]st way: Kill your whole system, by doing format C:
    [color="#800000">2nd way: Follow this advice from Shag:
    [color="#800000">?
    [color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
    () Uninstall software and drivers either, through control panel or the installation CD
    (2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
    [color="#800000">?
    [color="#800000">(3) Manually remove registry entries as follows:
    . Delete the files from "\Creative".
    2. Delete the following registry node from the registry
    - HKLM\Software\Creative Tech\Software Installed
    - HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
    (4) Reinstall the software and drivers.
    Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
    Cheers,
    Diabolius

    BTW just in case people search for the error message in German:
    in German the pop up says:
    "Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

Maybe you are looking for