Add display field into form after updating database

I have a form generated, then add fields into database. Other than re-create the form, are there any other way to add the addition field into the form ?

K,
You'll find answers to most of the basic questions in the user guide, http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10992/toc.htm. Let us know if you have specific questions that aren't addressed in there.
Scott

Similar Messages

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

Add EEWB Fields Into BP Contacts Screen In Web Ui

Hi Gurus,
                  I added 2 fields through EEWB for the BP relations screen it is working perefectly in the SAP GUI , i need to add these fields Into BP Contacts web ui screen , the problem is if fields data is already present it is working fine , if want to create new one for the contacts it is not setting the field value in web ui what is the problem help me resolve this problem.
Regards,
Naveen Kumar M S

Hi Masood,
In BP_DATA   and BP_CONT SET Methods We Have the same Code
entity ?= current.
      coll = entity->get_related_entities(
               iv_relation_name = 'ZZ2RCEEWCONTACTRel' ). "#EC NOTEXT
      current = coll->get_current( ).
      if current is not bound.
        return.
      endif.
But while Debugging we found a difference
In BP_DATA
current is bound
whereas in BP_CONT current is not bound
while going inside
current = coll->get_current( ).
method IF_BOL_BO_COL~GET_CURRENT .
       data: LV_ENTRY type CRMT_BOL_COL_ENTRY.
       if ME->TABIX > 0.
         read table ME->ENTITY_LIST index ME->TABIX            into LV_ENTRY.
         RV_RESULT = LV_ENTRY-BO.
       endif.
     endmethod.
ME->ENTITY_LIST was populated for BP_DATA and not populated for BP_CONT
Any Suggestions...
Regards,
Naveen.

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

Add display fields on subsequent delivery split

Hello all,
I need to add new fields to display additional information on the delivery split.
This information is very important to help the person that is performing the delivery split.
Is there a way to add display fields?
Thanks in advance.
Best regards,
Tiago Magalhães

No solution..

Question: using links in report to copy data into form for update

Hi there,
I have a report that selects data from one a table, and i want to populate a form to update the report info and more info that a user will enter into another table. With alot of help I have managed to get the first 3 column fields across by editing the report link, under report attributes -> column link. The values of Item 1 to Item 3 work fine, but how do i get the rest of the info in the other 5 columns across??
regards

I think you're trying to reinvent the htmldb wheel.
Have you tried looking at the wizards that help you do this?
Anyway, as an example, to populate the form using the pk
1: create your items on the page, including the PK
eg P2_EMPNO (PK), P2_ENAME, P2_SAL,P2_DEPTNO
2: create a page process "on load" that runs if the PK item is not null
begin
select ename,sal,deptno
into :P2_ENAME,P2_SAL,P2_DEPNTO
from emp
where empno = :P2_EMPNO
end;
3: You now need to write a process that does an update
after submit
begin
update emp
set ename = :P2_ENAME,
sal = P2_SAL,
deptno = :P2_DEPTNO
where empno = :P2_EMPNO;
end
You need to consider how to handle new rows, optimistic locking and a few other things.
I would suggest that you have a look at the existing form wizard that does all this for you. We can then work around any "limitations" you find.
Chris

Web form not updating database with stored procedure

Hello
i have a problem with the web form updating the database i have a stored procedure which i need to connect to. If i execute the procedure in the SQL it will update the database but when i run the web form i get my catch error "could not update database".
I have read so much on the net and my code seem ok but i,m just so lost.
stored procedure
PROCEDURE [dbo].[UpdateCustomer]
@ID INT,
@Firstname VARCHAR(30),
@Surname VARCHAR(30),
@Age INT
AS
BEGIN
UPDATE Customer
SET Firstname = @Firstname,
Surname = @Surname,
Age = @Age
WHERE CustID = @ID
END
update code
try
SqlCommand command = new SqlCommand();
command.Connection = conn;
command.CommandType = CommandType.StoredProcedure;
command.CommandText = "UpdateCustomer";
command.Connection.Open();
SqlParameter param = new SqlParameter();
param.ParameterName = "@ID";
param.SqlDbType = SqlDbType.Int;
param.Direction = ParameterDirection.Input;
param.Value = txtCustID.Text;
command.Parameters.Add(param);
command.Parameters.AddWithValue("@CustID", txtCustID.Text.ToString());
command.Parameters.AddWithValue("@Firstname", txtFirstname.Text);
command.Parameters.AddWithValue("@Surname", txtSurname.Text);
command.Parameters.AddWithValue("@Gender", Gender.Text.ToString());
command.Parameters.AddWithValue("@Age" ,txtAge.Text.ToString());
command.Parameters.AddWithValue("@Address1", txtAddress1.Text.ToString());
command.Parameters.AddWithValue("@Address2", txtAddress2.Text.ToString());
command.Parameters.AddWithValue("@City", txtCity.Text.ToString());
command.Parameters.AddWithValue("@Phone", txtPhone.Text.ToString());
command.Parameters.AddWithValue("@Mobile", txtMobile.Text.ToString());
command.Parameters.AddWithValue("@Email", txtEmail.Text.ToString());
command.ExecuteNonQuery();
lblMessage.Text = "Your Record(s) Have been Updated";
command.Connection.Close();
catch
lblMessage.Text = "Your Record was not updated please try again";
Thank you for your help

To expand on Mike's advice.
Change your catch to:
catch(Exception ex)
{ // Break point here
lblMessage.Text = "Your Record was not updated please try again";
Put a break point in where the comment says.
Run it.
Hover over ex or add a quickwatch ( right click it ) and see what the error and inner exception is.
I see several problems though.
You have way too many parameters and Age should be int.
They are objects - they have a type.
It'll be a string with your code there.
Something more like
command.Parameters.Add("@Age", SqlDbType.Int);
command.Parameters["@Age"].Value = Convert.ToInt32(txtAge.Text);
Although that might not cut and paste, it's air code intended to give you the idea.
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles

How can I to resolve a write protected form after updating the form?

The following error is displayed after updating a form “Any changes made to this form cannot be saved.” These are the steps taken to update the form:
1)      Move form to Workbench ES Resources.
2)      Point Variables to new form
3)      Invoke process
The updated form is posted on Workspace. LAN users can make changes and submit the form, but WAN users get the error above and cannot make any changes.
Thanks,

You need to know that "USB Key" technology may not be appropriate for a system disk. Check out "wear leveling" on Wikipedia for a sobering discussion of the service life of solid-state drives. Also read "solid-state drives" (Ibid.) for a detailed comparison with hard disk technology.
--Gil

How to add the fields into combo ?

Hi,
I want to add the table fields into combo box. Now I am able to getting the columns from table but I don�t know how to add that columns in combo box.
My jsp getting the columns from table.
function metadata(){
     try {
     Connection con = null;
     Class.forName("oracle.jdbc.driver.OracleDriver") ;
     con = DriverManager.getConnection("jdbc:oracle:thin:@10.60.4.25:1521:clopaydb","scott","tiger");
     String query = "SELECT * FROM emp";
         DatabaseMetaData dma = con.getMetaData ();
         Statement stmt = con.createStatement ();
          ResultSet rs = stmt.executeQuery (query);
          ResultSetMetaData rsmd = rs.getMetaData ();
          int i;
          int numCols = rsmd.getColumnCount ();
          for (i=1; i<=numCols; i++) {
          if (i > 1) System.out.print(",");
          System.out.print("\nThe Table Column list "+rsmd.getColumnLabel(i));
          rs.close();
          stmt.close();
          con.close();
          catch (Exception ex) {
          ex.printStackTrace ();
     }Please give me a sample code for add these items into combo. (I need JSP sample code )
Thanks & Regards,
Merlin Roshina

function metadata(){
try {??
Are you sure on this ? Dont mix javascript function with a java method.
Make a java bean and your method may return an ArrayList.
In your JSP ..
<select name="yourComboBox">
<%
// Make a For Loop for the arraylist
String columnLabel = (String ) arrayList.get(i);
<option value="<%=columnLabel%>"><%=columnLabel%></option>
<%
} // end bracing of for loop
%>
</select>
Post your code based on the directions above then we can help you more on this if reqd.
Probably you should look up into sample JSP ..JDBC sample codes on google.
-Rohit

Can't add songs to iPod Touch after updating to v2.0

I just updated my iPod Touch to v2.0 and now I cannot load any songs onto it. When I drag songs or playlists over the Touch in the iTunes Devices list they just bounce off. Everything else seems to be acting properly. Contacts, Photos, etc. sync/update just fine.
I had this problem before after updating to Leopard. I can't find the thread I used then. It walked you through a process of deleting some file in the User>>Library folder before reinstalling iTunes. Unfortunately I don't remember which file(s) need to be tossed.
Anybody know the sequence or have a link to the earlier thread?
Thanks...
John

An update...
Having nothing left to lose, I trashed iTunes and reinstalled it. Now I can at least sync Playlists. I'm not sure why I can't drag songs onto the iPod touch.
Still waiting for help on that one...

Add new field into Standard Adobe Form

Hi Expert,
I'm trying to do a very simple thing (at least that is what i think), we want to have new scenario for PCR (personnel change request). So i copy the standard interface and form (ISR_FORM_SPEG) and add some new field in that form (trough Tcode SFP). The problem is the new field that i added is not showing up any value, i tried to add address or personnel area to the form. What do i miss here? I'm relatively new to this adobe form. Thanks
Regards
Hendri

Hi,
Because I'm new at this i will assume that this problem is just as a matter of binding problem. I've copy the form and interface ISR_form_SPEG to Z.
In interface(TCode SFP) Z_ISR_IF_SPEG there is enty in import like this
position | Type | QISR_TAB_type| | |
In the Z_ISR_FORM_SPEG i drag the interface Position (from import folder) into the context on the right side of screen, in Layout tab i create ISR Text Display, and drag the position into the text display (which i believe is the binding processes). Activate it and save. But no value is displayed when running the iview on the portal (personnel change request), the form show and all label are show too but the value is not showing. Thanks

How do I add a field into an existing form in SharePoint Designer 2010 and...?

I'm trying to add an existing field to an existing form in SharePoint Designer 2010. It's a URL to the employee's photo. But each time I try to "Insert as picture" the url to the photo has a trailing comma. Why and more importantly, how do I get
rid of it?
Thanks!

Hello,
See this similar thread:
http://sharepoint.stackexchange.com/questions/10149/comma-in-url-field
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Add new field into result of the transaction MD4C

i want more information into the result of MD4C
example:
delivery date of the purchase order and confirmation date of the purchase order and field USR06 of PRPS table and other field like
moving average price VERPR of the table MBEW and other information from SAP table related to purchase order or WBS elements or Order
thanks a lot for reply
best regards
Patrice

User exits and BAdI's for MD4C
Enhancement/ Business Add-in            Description
Enhancement
CO610001               User exits: Assembly processing
M61X0001               User exits PP-MRP materials planning
M61X0002               User Exits PP-MRP Material Requirements Planning Evaluations
Business Add-in
MD_MRP_RUN_PARALLEL         Add-Ins for parallel planning run of requirements planning
MD_PIR_FLEX_CONS            BAdI for flexible planned ind. req. consumption/reduction
MD_PLANNING_RESULT          BADI for Issuing Planning Result
MD_PLANNING_SCENARIO          BAdI for Maintenance of Add. Parameters in Planning Scenario
MD_PLDORD_BOMEX_CIF         BAdI: Deactivation of BOM Forced Explosion in CIF
MD_PLDORD_CHANGE            BAdI for Changing Planned Orders
MD_PLDORD_POST              BAdI: Update of Planned Orders
MD_PLDORD_SCHEDULING          BAdI: Schedule Planned Orders
MD_PLDORD_TIME_STAMP          BADI for publishing time stamp problems
MD_PURREQ_CHANGE            BADI for changing purchase requisitions
MD_PURREQ_POST              BADI for updating purchase requisitions
MD_PURREQ_REL_STRAT         BAdI for Deactivating Release Strategy for MRP Purch. Reqs
MD_STOCK_TRANSFER           BADI: Change the Requirement Date During Stock Transfer
MD_SUBCONT_LOGIC            BADI: Determine Subcontracting Logic
MD_ADD_COL_EZPS             BAdI: Extra Columns for Evaluation PP-MRP Reqmnts Planning
MD_ADD_COL_OVERVIEW         BAdI: Display of Additional Columns in the Material Overview
MD_ADD_ELEMENTS             BAdI for Adding Additional Requirements/Receipts
MD_ALTERN_EXPLOSION         BAdI for Alternative Explosion of Planned Orders (IPPE)
MD_CHANGE_CALENDAR          BAdI: Change Calendar for Range of Coverage Calculation
MD_CHANGE_MRP_DATA          BAdI: Change Data when Importing MDPSX
MD_DISPLAY_ELEMENT          BAdI for Changing Display of MRP Elements
MD_EXT_SUP                  BAdI for Determining the Issuing Storage Location
MD_INTERACT_PLANNING          BAdI for Deactivating Changeability of MRP Elements
MD_LAST_LOT_EXACT           BAdI for Calculating Last Lot Exactly in Individual Segment
MD_MODIFY_PRODVERS          BAdI for Modifying Production Version
MD_MODIFY_SOURCE            BAdI for Modifying Source Determination in MRP
MD_MRP_LIST          BADI for further processing of MRP list
MD_MRP_PARAMETERS           BAdI: Change Planning Parameters

Add display field into form after updating database

Similar Messages

Maybe you are looking for