Add material tax classification to company code

Hi gurus,
hope you can help me with this one.
i need to add/extend the material tax classification to a company code... how would i do that.
appreciate your help.
thanks in advance

Hello Brett,
I am facing the same issue. Can I know how to change the country defaulted to the country where I can to create?
Thank You.

Similar Messages

  • Excise duty: error 9914 No material data maintained for company code

    Dear all,
    when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
    However, I see material is correct.
    Can you tell me which views of material master am I missing?
    What do I need to check?
    Thanks in advance,
    F

    Settings in material master "Basic view 1"

  • Updating the Customer & Material Tax Classification via LSMW only

    We need to update the Customer and Material Tax Classification via LSMW only, in such a way that on the updation of the Tax classifications the Customer Master and the Material Master should be updated automatically.
    Please let me know if anyone has done the same also it would be really helpful if you can provide me the details.
    Regards,
    Arindam

    Hi,
    It's not clear your question to me.
    Do you want to update the Tax classification in the customer master & Material master?
    I did same, but with 2 different LSMW"s as there is not link between customer master & Material master.
    To update customer tax classification -
    In that you have to feed relevant customer numbers with sales areas & relevant tax classification for one LSMW.
    To update Material tax classification -
    In that you have to feed relevant material numbers with sales areas & relevant tax classification for different LSMW.
    Best regards,
    Anupa

  • Assign Withholding Tax Types to Company Code

    In SPRO in the menu item "Assign Withholding Tax Types to Company Code"  (program SAPL0F61), I enter to try and setup the Types for my new Company code. 
    When I go into New Entries,  On the top drop-down I enter my new Company Code, then in the
    "Wthhld tax type" field, I click on the look-up and don't see the Withholding tax types that I setup for country Italy.  The only ones that are showing up are for a previous country setup Mexico.
    I setup Italy as a Withholding Tax Country, and I setup the Withholding Tax types already.
    Does anybody know how to get the Withholding Tax Types to show up for Italy and not just Mexico?
    thanks

    This is an ABAP Development forum, you might want to post your question in the SD or FI forum instead.

  • Plant to Plant STO with excise invoice and taxes in one company code

    Hi,
    I have a new business requirement, we want to create only one company code and 12 plants in different states,  each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant  if the plant is in different states we want that the material should be transfer from palnt to plant  with excise invoice only,  as we have the company code common,  how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
    regards,
    zafar

    hi,
    I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
    For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error,  Cannot determine shipping data for the material 1434? 
    I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right? 
    Solution:
    1. Mat.(1434) should be maintained in both the plants. (1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.  
        Create customer (xd01) & and define the shipping data for plants in both the plants.
        Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
        In Receiving plant (1100)                         In Supplying plant (1000)
        Customer num.  123345 (for ex.)              Customer num.  -
    (don't fill) 
        Sales org.yyy                                                  
        Dist. Channel                                                              
        Sales div.  y   
    5. Assign doc. Type is "NL" for intra company STO. If  STO is inter company, Assign doc. Type is "NLCC".
        Position doc type is "UB"
        Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
    6. Assign doc. Type is "UB" to u'r plants.(PO)
        Go for new entries 
        Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
    7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO  of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide "out bound delivery num".
    10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
    11. See the stock over view in the receiving & supplying plants.  
    thanking you

  • Different 'MWST' Tax rate for company codes with same country

    Hi Experts,
    I am not an SD expert, but need some inputs on a requirement. We have the manual condition type 'MWST' for tax conditions and the 'MWST' rate is set for different countries.
    We have Sales Organization 'A' and 'B' which are for the same country (JP) and the requirement is to have tax as 7% for Sales org 'A' and no tax (0%) for  'B' in billing for the same billing material . But when we set the tax classification in material master, for Sales Org 'B' and the billing material, the system automatically changes the classification for 'A' also to 0% since the tax classification is based on country and not sales organization. Here both the Sales org is for the same country 'JP'.
    Is there any other way or configuration through which we can achieve this requirement ?
    Your thoughts are much appreciated.
    Thanks,
    Dhan

    Well mate, Vemuri provide an alternative from FI point of view. From SD standing I'd suggest to work out the condition technique as this condition type (MWST) has an access sequence MWST (the same code) and it has 3 tables related:
    78 - Departure Country / Destination Country
    2 - Domestic Taxes
    11 - Export Taxes
    What I can see is that you need to include the value Sales Organization in one of the tables.
    NOW, IF YOU DONT WANNA MESS WITH THE CONFIG...
    The customer has Tax indicators in its Sales Area Data, why don't you just set the value there to determine always 0% tax for the Sales Org you want?
    Look forward for your remarks.
    Saludos!
    Ricardo

  • Same material master in two company codes with batch management

    Hi,
    There are two company codes in one client. In one batch management is already active. But in another company code batch management is not required. Is it possible to have batch management active in one company code and inactive in another company code where both the co. codes are in the same client? The same material master to be used in both company codes.
    Thanks,
    Satya.

    Hi Satyabarata,
    As far as you dont want to move the same materiel i.eStock Transfer with Inter comapy billing scenario then it  will be fine.
    If you try to Transfer a Batch manged material into a non batch manged CC it will work fine. But on the other hand when do via-versa the system will ask for the Batch information where the Batch management is active.
    If you want to use same Material Master for both CC then its not advisable.
    Please let me know if you need any other information.
    Thx.
    MJ

  • Material Ledger activation at Company Code Level

    Hi All,
    I have a requirement where Material Ledger need to be activated at Company level and not at single Plant Level. We are about to implement ML and would like to have periodic unit price calculated at company code level  (e.g. 1 material, 4 plants, 1 company = 1 periodic unit price).
    I went through the customization , it only refers to Plant level (Valuation area level)
    Could anybody throw light on this.
    Regards
    Barbara

    Hi,
    What is the valuation level?
    If the valuation is at plant level you can maintain different views at different plants of these company codes.
    If only name is different i think you would do better with the same material code, and if you still want to differentiate please create two different materials
    Regards,
    Prithviraj
    Edited by: Prithviraj Talekar on Feb 11, 2009 5:25 AM

  • Material Tax Classification

    Hi Gurus,
    Need a little suggestion for a doubt -
    I accidently changed Material Masters data of some items, after running a faulty LSMW
    When I look at the change document for some of those articles it says -
    Change          Tax classification article          1     Ireland
    So I believe it has changed the tax classification for this article ONLY for Ireland
    when I reversed the change .. it says ..
    Change          Tax classification article     1 Full tax     0 No tax     Ireland              Output Tax
    I have a few doubts .. first , is this changed only for a single country or for all of them .. & if I have reversed the changes  ..
    Plz suggest what shall I do to make it as it was ...
    << Moderator message - Please do not promise points >>
    .. many thanks for your help
    Edited by: Rob Burbank on Feb 7, 2011 3:54 PM

    The tax classification section is dynamically defaulted based on the plants that are linked to your sales area.
    for each plant country you will see an entry.
    if such an assignment is made after go-live, then with the next change of material master you are asked to complete the classification.
    This cannot be undone. you can just change it to another value if the value you entered was wrong.

  • MIRO - deactivate direct posting to GL / material acct for selected company codes

    Hi All,
    I have a requirement to deactive direct posting to G/L and material accounts in MIRO, however, only for selected company codes (this cannot be done for all of them on client level in SPRO->Material Management->Logistic Invoice verification->Incoming Invoice -> Activate direct posting to GL/ Material accounts).
    The thing is that for those company codes, MIRO posting has to be made always with Purchase Order Reference.
    My idea is to build simple validation rule:
    if company code is equal to (SET) and Purchase Order Reference is empty then error message should appear: "Posting without PO reference not allowed"
    I was also thinking on creating own layout in MIRO and assign it to clerks which are responsible for posting in those company codes.
    Can you advise on that, please?
    Best regards,
    Lukasz

    Hi Tejas,
    Thanks for your reply.
    Answering your questions:
    1. The thing is that these GLs are being posted with other transactions.
    2. My concern is that after the document is parked and while editing user will delete PO reference, it can be any GL account picked in "GL tab" of MIRO transaction. My understanding is that I should put tick on "Post automatically only" on all the GL accounts which users are able to use (correctly or not) in that case.
    My aim in this configuration is to restrict those posting in such way that users are not allowed to use them - and this is only in regards to MIRO transaction.

  • Withholding Tax for multiple company codes-Bank Challan issue

    Hi
    I am held up with one issue.
    I have four company codes and Extended withholding tax is activated for all the company codes.  I have assigned the same number group and number range status for all the company codes.
    Now when I try to update Bank challan for a TDS clearing document, the system says bank challan has already updated.  But the challan is not updated yet.  When we see the document, the challan number and date is coming as blank only.
    Is it due to assigning the same number ranges across company codes ?
    Your views are highly welcome.
    Regardz

    No answer ?

  • Transfer Posting of Tax for Cross-Company Code Transactions

    Hi Experts,
    I am posting a cross company (vendor invoice) document. Expenses in both the company codes involved are taxable. But in case of cross company code documents, taxes are posted and displayed in the first company code only.
    In certain countries you have a requirement to display the tax amounts separately in each company code For which you need to run RFBUST10 program in SE38.
    I have executed this program for couple of documents but, it is still not clear how this program works. I tried to execute the batch input sessions created after the program execution but does not show any thing related to the tax.
    While processing the batchinput session I get a message Field BSEG-MWSKZ. does not exist in the screen SAPMF05A 0301. (Tax code field is not available in the screens that are processed by the batchinput session). Document posted by batch input is debiting the customer and crediting the vendor (mainitained in OBYA), to the extent of the expense amount including its tax amount.
    Can anybody who has worked on this scenario tell me what exactly happens to the tax amount fo the cross company expense.
    Thanks in advance.
    Best Regards
    KIM Khan.

    Issue resolved by self !

  • Material Management view on company code

    Hi All,
    I created Company code and gave year and posting period as 2008 and 4 but it shoild be 2008 and 2 as according to IN01 Company code(Indian standard prodecure)
             Now i am going to change to 2008 and 2 in omsy tcode but system is not allowing Please suggest me how to change to 2008 and 2.

    You Cannot Roll Back the MM Period..
    But, You have another option which is not advisible.
    1. Go to SPRO>Enterprise Structure>Assignments-->
    Logistics General -->Assign Plants to Company code.
    Here, Delete all the plants of your company code and save.
    2. go to OMSY, and enter the period as you want.
    3. Again Reassign the plants to your company code as in step 1.
    This causes serious effects in FI side of your company code.
    i.e., G/L accounts will be affected.
    Edited by: Anand K on May 1, 2008 12:06 PM

  • User exit for different Material Document for different company code

    Hi,
    We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
    Regards
    Sai Krishna

    [user exit for generating external serial;
    [BADI MB_DOCUMENT_BADI;
    [user exit or any other enhancements during good receipt;

  • Add freight cost in a cross company code scenario using a costing sheet

    Dear Forum,
    I will like to add freight cost to a material using a costing sheet. The freight percentage is very easy to add and works fine when the cost is added in the company code costing. My problems start when I want to add the freight in the cross-company code costing. I want to setup a cross-company code costing where the freight cost is added to the material in the buying company code and not on the selling company code. The cross-company code costing is setup using special procurement costing keys. 
    In below costing (CK11N) the procurement costing key is not used.
    From the itemization it is shown that purchase info.record 5300067643 is read and the price of 12,97 is determined. There is added 10% in freight coming from the costing sheet.
    The freight is shown in the cost component structure as well.
    The special procurement type is now changed from ‘20’ to ‘AT´ on the MRP2 screen in the material master. The procurement is now pointing to an internal plant called ‘DCN’.
    The costing of material 105050 is now repeated. I get the expected result from changing the procurement key, as I can now see the material is sourced from plant ‘DCN’. DCN is sourcing the material from BJ07, but that is not relevant for the example.
    If I now look at the itemization again on the costing in BGA1 I now see that the price is not coming from the info.record. It is the costing in DCN that is used.
    I will still like to add the freight cost in BGA1.
    How do I add freight cost in BGA1 when I at the same time want to have the costing to be taken from plant DCN?
    Please let me know if you need additional information on the customizing setup of the system.
    Best regards,
    Kim Hjorth Poulsen

    Hi Srinu,
    Thank You for a prompt feedback.
    I have tried to follow Your advise. The special procurement costing key is customized like below.
    I have updated the special procurement costing key on the costing 1 view of the material master. When costing the material it is using the special procurement key. This can be seen from the qty. structure tab in CK11N.
    It is also costing cross company as intended.
    The itemization looks like below.
    and the cost component structure looks like below.
    Unfortunately the freight is not added in the costing in BGA1.
    I noticed that when the costing is made without special procurement key the costing sheet used in the costing is for material components. If the costing is made with the special procurement keys the costing sheet used is for finished and semi-finished materials. The customizing in both of the costing sheets are the same, but only when costing is without the special procurement keys the freight is added.
    So unfornutely Your suggestion did not solve the problem.
    Best regards,
    Kim

Maybe you are looking for