Add/remove open items to dispute case

Hello..
I'm finding a way to add/remove open items to dispute case in a program level for example using RFC.
I already made a program to create dispute case refer to tcode FDM_AUTO_CREATE but add/remove open items seems to be not simple...
Is there any way to add/remove disputed items using 2~3 functions in my Z-program?

Bapi functions of dispute case are too complex and not automated for example amount calculation.
I found another easy function FDM_AR_CDIS_ADD_ITEM.
It seems to be only for customer-disputed item but it works well in case of normal invoice.
Thank you for good help!

Similar Messages

  • FH087 - Remove open item management to GL Accounts

    Dear All,
    I need to remove open item management to few GL Accounts.    The balance is Zero now.  
    I removed the open item management and try to save the GL Account and the error meesage showing with FH087 - You cannot change Open Item setting.
    Requesting help and guidelines from the forum.
    Thanks in advance,
    Regards,
    SS

    Hi
    Please refer to below answers:
    1) the OSS note 175960, mentions the afftected releases for software component SAP_APPL is till release 600. Currently we are at SAP_APPL 604 level 07. Is this note applicable to us?
    Yes, it can be used.
    2) Will the program ZFSEPA03 / RFSEPA03 converts the current open item line items to line item display?
    The report does the following:
    1. Sets a posting block to the GL account.
    2. Selects all open items and deletes the XOPVW indicator in tables BSEG and BSIS
    3. Deactivates the XOPVW flag in the GL account master data.
    4. Deletes the posting block.
    3) After executing this program, if suppose later any of the clearing document for the cleared items in the account got reversed. Will this items become open item again? if yes, then it won't be possible to clear these items as the gl won't be open item managed.
    I am not sure about this step, but you will have (old) cleared items in the document tables (BSEG/BSAS) which does not match the current account settings (as these items are from the dateBEFORE the change took place). But this does not have any influence on postings in the daily business.
    4) Any pre requisite like the gl account should have zero balance or there should not be any open items, before executing this program ZFSEPA03.
    The subsequent deactivation of open item management is not that critical.
    It is not necessary to bring the account balance to zero, you can execute ZFSEPA03 without any correction postings. And it is even not necessary to change the master data manually, this will be done by the program.
    5) is there any other transaction similar to FAGL_ACTIVATE_OP for deactivating the open item managed tick in ECC 6.0 with NEW GL active.
    You will do it by running the mentioned report.
    The RFSEPA03 or your 'Z' version will not have any influence on the NewG/L tables likeFAGLFLEXA Only the currently open items will set to normal items.
    Regards
    Divya S

  • FI: Open Items and Disputes

    Hi Experts,
    I would like to know how to retrieve the FI Open items. Basically the SAP tables and criteria to fetch all Open Items.
    Also, how to identify the disputes in the items.
    Best Regards,
    Kurtt

    Hi Gautham,
    I would like to confirm if the customer open items can be found in table BSID? Thanks so much!
    Best Regards,
    Kurtt

  • Dispute case auto closing

    Hi,
    I have created a dispute case on customer noted item, when i will reverse the noted item the dispute case is not auto closed, it is still in open status.
    can any one give me solution for this.
    Regards,
    Prakash

    Hi,
    I have read already but my problem is i have created a noted item for which if i post advance receipt then i will go preclosed, but when i cancel the noted item it will still be open, i need close it pre closed manually.
    regards,
    Prakash

  • Open item issue

    Dear Sap Gurus,
    Client as given one format for vendor open tem balancess based on days and due date, i post in f-02  debit is upload g/l account and in this one amount, duedate, credit is actual vendor code and amount, days, payment reference and saved 1000rs   after that i paid 500 based on refernce of document number. If i check open items system shows what ever i have already paid 500 rs it is showing open  item why it shows.
    Regards
    Veeru

    Dear,
    You have paid partially, that is 500 rs out of 1000Rs. The system will show both the amounts in the vendor line items as open, but if you check the balance then it would be 500 rs only. Again when you pay balance 500 rs then it will show zero balance with no open items.
    In case if you want only balance 500 rs then you have to do the payment based on residual instead of partial, here the system will clear the original invoice and creates a new document for the balance amount.

  • Manage Dispute Case after data migration

    Dear all,
    Iu2019m facing the following problem.
    Iu2019ve all the Dispute case in a Financial Supply Chain System (APJ).
    Customer Line Items are, instead, in the Financial System (AP3)
    After a Data Migration, all my line item will be migrated in to a new system (BD3) but without the Dispute Case.
    There is a a way to link massively items with Dispute Case or users must proceed one by one ?
    Thanks in advance
    Alberto

    sounds like changing the ALE from system 1 to the other system.
    However I doubt it will be that easy.
    I believe that could should contact SAP SLO to work out the best route for data migration.

  • Deactivate "Open Item" for GL.

    Hi
    I am referring to a group of companies that went live last month. The chart of accounts are common.  One company has uploaded AR account as normal GL. It’s planned to reverse these entries and re-upload after making the GL a recon account in that company code.
    However, when trying to remove “Open Item” following error message comes up.
    Account balance = 0 but open items exist in the account
    Message no. FH190
    I noted that RFSEPA03 program is not relevant when new GL is active.
    Any suggestions?
    Thanks.

    Hi N Wimalagooneratne,
    Error msg FH190 prevents users from switching off the Open item management indicator when open items already exist (this error occurs when switching on this indicator as well).
    Please consider the following options:
    1) Change error msg FH190 to warning msg via trans OBA5. Enter application area FH. Press Enter. Click on New entries.
    MsgNo Online Batchl
    190 W W
    Click on Save.
    2) Create new G/L account with Open item management indicator turned OFF via trans FS00. Transfer balance from old G/L account (open item management ON) to new G/L account (open item management OFF).
    Kind Regards,
    Mateus Grings

  • Open Item Management and parallel accounting issue

    We are using parallel accounting, there are two ledgers setup.
    With this setup, posing to leading ledger will automatically post an entries to non-leading ledger.
    Our user have this requirement, that for adjustment purpose, they just want to post to one ledger (by specifying the leadger group).
    but we encounter a problem, when GL account setup with 'Open Item Management' , FBB1 dont allow to post it directly when we enter the ledger group.
    Can the expert advise, it is with parallel accounting, account with 'Open Item Management' have to post to all ledgers.
    Thank you.

    Yes, this is a precondition , if a particular posting needs to be made to non -leading leadger , then accounts should be managed as not open items .
    In case if the accounts is managed as open items then posting happens to all the ledgers.
    Thanks
    Regards,
    Manish Garg

  • Tcode FB15 - assign/clear open items

    I was hoping get clarification on tcode FB15 (Assignment of Open items)
    In what cases do I need to manually clear a AR document?
    Maybe customer deposits?
    For example, if I apply an incoming cash payment to an open invoice, does that gets cleared automatically? I checked the balance for the customer and green lights are on so I assumed this is the case.
    when would I need to use FB15 to manually clear?
    Thank you
    Kate

    Hi
    If you are trying to clear vendor from MM i.e, from procurement process, first you need to authorize the particular purchase order in t-code MRBR then it allows you to clear the open item. Where these open items can viewed on FLB1N but you cant clear unless its been authorized.
    If found helpful, please assign points.
    Regards
    Uday

  • Open item problem

    Hello, an account have been created without 'Open item management' being checked.A posting has then been done.. Then, the account has been recreated with 'Open item management' checked.Program ZRFSEPA02 has then  been executed. It is now impossible to remove 'Open item management' given that some postings have already been done.what can i do so as not to manage open items for this a/c?
    thanks.

    Hello,
    Do you want to deactivate open item management? Run RFSEPA03 program with using SE38.
    Regards,
    Burak

  • FSCM SAP 5.0 Dispute Management-record and case model-dispute cas model.xml

    Hello,
    I am using the W21: Dipsute Management Building Block Configuration Guide.doc
    At the first step, creating a case record model, the configuration guide refers to a file:
    6.     In the toolbar of the Modeler in the upper middle section select Model >> Load local file and open the file - dispute case model.xml -.
    I do not have this file available, does anyone have any idea how to resolve this?
    -     How can I obtain this file
    -     Is this file necessary, to create a case record model
    Thanks for your help.
    Kind regards,
    Santiago

    Hi Santiago,
    This was tricky for me too.  Execute tran UDM_DISPUTE.  Change your RMS ID (left side, middle box, icon with two overlapping squares) to UDM_DISPUTE. In the same box, expand Record and Case Record Models.  Double click on Modeler for Case Records in Dispute Management.  This brings up a search box.  Click on execute Search. Double click on the Dispute Management entry in the lower box.  This gives you the standard model.  You can download this, using the Other Model Functions.
    Then change to your custom RMS ID (ex. ZUDM_DISPUTE).  Expand Record and Case Record Models.  Right click on Modeler for Case Records in Dispute Management and select Create.  Then upload the standard model into your RMS.  Then you can customize the model as you wish.  Hope that helps! 
    Beth

  • Dispute case Amount Fields in Local Currency

    Is it possible to have dispute case amount fields available in local currency instead of document currency?

    You can add new fields to the Dispute case (attributes) - therefore it is possible.
    It is not there as standard - however you can add the fields to the UDMCASEATTR00 table - define how they are populated via a BAdI - and then add the new fields into you case attribute profile.

  • When using program RFDM3000/Automatic creation of dispute cases what is the difference with the option of Automatic incoming payment and Open items?

    We currently have a batch jobs running for each, automatic incoming payment and open items.  This was set up in the past and we are trying to determine what the difference is for each of these functions?  Do you need to have the automatic incoming run prior to the open items for residuals and payments on accounts?

    Hi Chris,
    Program RFDM3000 creates dispute cases for residual items arising during automatic incoming payments (account statement, lockbox), during check presentation, or in postprocessing.
    Alternatively, you can use the program to create dispute cases for open receivables items. You can use the selection criteria to restrict the quantity of open items (for example, using the document type and posting key for residual items from incoming payment postings).
    You will find more information in the link below
    http://help.sap.com/saphelp_erp2004/helpdata/en/0b/e07340b0c6980ae10000000a155106/content.htm
    Regards,
    Jose

  • Customer line items ...dispute case

    Friends,
    when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
    its kind of urgent please put some light onto it, any help would be highly appreciable...
    Thanks
    Jay

    sounds like changing the ALE from system 1 to the other system.
    However I doubt it will be that easy.
    I believe that could should contact SAP SLO to work out the best route for data migration.

  • I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

    I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Maybe you are looking for