Add "Sent via" Line To Outgoing E-Mail From TREO 700wx

I have a couple of users who would like to have the "Sent via" line added to e-mail that they send from their TREOs. This is similar to the line added to an outgoing e-mail message when being sent from a BlackBerry device. Is this possible? I've looked everywhere in the phone that I can think of, but have come up empty. Any information would be greatly appreciated.
Post relates to: Treo 700wx (Verizon)

AS you've seen on the Blackberrys that message "Sent by my Blackberry" is basically a footer or signature on the message. On the 700wx to set this up you need to go to Start>Messaging>Menu button>Tools>Options and it should open to the accounts tab at the botton with a signatures button on the right side. Click on the signatures button and There you select the account and whether you want to use it for replies and forwarding as well.

Similar Messages

Outgoing e-mail from BB8330 will not send.

Looking at the messages on the board looks like mine is pretty simple issue but i could'nt figure it out. Need help really bad. I have been working on this issue for a couple of days and my BoSS is getting really inpatient.
This is my first time setting up Blackberry with exchange server. I think i've done everything correctly except this one issue. I can not send e-mail from the unit even though i can text messages send and recieve. Receiving e-mail is working just fine. And also working with the e-mail (Outlook) on the website and tablet laptop is not a problem.
Please HELP..it's been very frustrating trying to get it resolve. Thank you for any help or tip you can share.
Julius

It may be a transaction message. If so when you check tomorrow, check on this chart. See if you see your error listed. http://www.blackberry.com/btsc/KB02960
Message Edited by jmrmb80 on 09-17-2008 11:07 PM
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Outgoing .Mac mail from Mail program

When I set up my .mac mail account on the Mail program, I can receive pick up mail from .mac but can't send mail. I get a can't locate server error message.
I'm not much of a geek so simple descriptions &/or walk-thrus are greatly appreciated.
Thanks

No error message is provided?
Who is your ISP used for connecting to the internet?
Most, if not all ISPs now block the use of SMTP servers outside of their network on Port 25. Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 (such as the .Mac SMTP server) but some block it use regardless.
Something to try.
Go to Mail > Preferences > Accounts and under the Account Information for your .Mac account preferences at the SMTP server selection, select the Server Settings button below.
At the Server Port field, enter 587 in place of 25 and when finished, select OK to save the changed setting.
If this doesn't work, select/use your ISP's SMTP server to send mail with your .Mac account which is invisible to all recipients.

Can't login to .mac mail from Treo 680 on cingular

Hi everyone:
I'm using a Treo 680 on Cingular Wireless (AT&T)with the Blazer browser and can't get the LOGIN to activate when I try to retrieve mail from my .mac mail box.
I get on the net and to the .mac homepage.
I put in my member name: [email protected]
I put in my password and "unassigned" becomes "assigned".
But when I go to click LOGIN, the the word is there, but not the box around it and it's inactive, making it impossible for me to login.
Any help would be appreciated.
Thanks,
Gary
PowerBookG4 Mac OS X (10.4.9) 1 gig Ram

Well, I took it to the Apple store and they fixed it without reason as to why it got stuck in this mode.

Can no longer send outgoing e-mail

Up until last week, I was able to send outgoing e-mail from my me.com account. Now, I can't. I read somewhere that if you were away and connected to another server and then put the computer to sleep, that could be the problem. Any advice would be greatly appreciated.

this is the server forum.. you might want to look at
http://discussions.apple.com/forum.jspa?forumID=1198
this is the .me mail forum.

Delete mail from server after removed from IN BOX

I have a mail management issue I have not been able to fully solve.
I am balancing the same POP email accounts among the laptop using Mail (for home use) and my desktop using Eudora Pro (for work). Using Eudora, I can manually select to delete a message from the server. Eudora's manual deletions are flawless. Using Mail, the only option I can see that will help me do this is to select delete mail "When moved from In Box." If I hit the "delete" key, wouldn't that be the same as "moving if from the IN BOX?" When is the protocol actually carried out? On the next mail check? Immediately? Upon quitting and restarting Mail? I'm confused as to how this happens and why it does not seem to work all of the time.
Any and all assistance is most appreciated.
Much obliged,
Mick

Yes, deleting a message counts as moving it out of
the inbox. The commands to remove the message from
the server are sent the next time you check mail from
that server, but only if there are new messages to be
received from the server. Yes, many of us feel that
is a bug in Mail, that it should send the remove from
server commands the next time you check mail, whether
or not there are new messages to be downloaded.
Oh Gawd, I bet that's it. Yes, if that is the case, I would agree. It does not lead to efficient mail management if there needs to be a new message there. Do you know of any plans to change or alter that? Or has someone written an AppleScript of some kind to execute the command regardless?
It's a great command, otherwise. It's nice to be able to delete a message off of one computer and have it delete off of the server without any extra hassle.
Just wondering if there are any workarounds out there other than sending oneself a new message to get the delete from server command to activate.
cheers,
Mick

Problem moving mail from one computer to another...

Hello.
I'm trying to move a specific mailbox from one computer to another computer. I'm doing this to 2 pairs of machines and with the first pair I had no issues. But, then second pair I get errors.
On the first computer I just copied the .mbox folder (which contains the sub "Messages" folder & info.plist file) from the one computer to the other. Then, in mail.app I "import" the messages via the Import option (importing mail from Mac OS X). No problem and all messages are imported.
On the second pair of computers, I did the same thing, but when I try and Import the messages onto the second machine, it says it can't find any OS X mail messages to import.
I really need to get these messages from one machine to another. "Forwarding" or "Redirecting" all the messages from one machine to another isn't an option.
Can anyone suggest what might be wrong, or another way of migrating the single folder of messages (not the entire account) from one machine to another?
Thanks,
Kristin.

Hi Kristin,
I stay away from mbox files because it has never worked for me, but I may have a solution. This may not be THE award winning answer, but you could consider it when the other options don't work:
I assume you want to import a mailbox that is NOT part of an IMAP account, because otherwise you would not have this problem (right?) (otherwise just open that IMAP account on the computer you want the messages on).
But if you have an IMAP account, besides the POP account that contains the mailbox in question, you can use that account to fix your problem:
Go to the compu that has the desired mailbox, make a new folder in the IMAP account called 'backup' or whatever. Copy all messages from the desired mailbox to that new IMAP folder (depending on size this may take a while, because you are uploading via your internet connection). Now go to the other compu, make a new 'local folder' in mail.app. Open the IMAP account in mail.app and open the 'back up folder'. Now copy all messages to the new, local folder.
If you don't have an IMAP account, you can always open a free one with gmail.
I know, it's not very elegant, but this will work guaranteed.
Good luck,
Feddeg

Can the individual form response be sent via e-mail to us in the PDF form format (not the raw output we see currently when using e-mail notifcation) each time a user submits a reponse?

Hi, we basically have an on-line job application that we need to be sent to us via e-mail notification every time a user submits a response, not with the raw data output from the form fields like the current e-mail notification setting allows, but as an actual PDF attachment that mirrors the format of the on-line form, with the user response data in it. We need this to be automated and sent to a central HR e-mail to distro to others. It would be essentially the same thing as a user downloading a PDF form, filling it out, then e-mailing it back to us, but using the submit options via the Form Central server instead. Is this even possible and, if so, is there any documentation on it? I have not found anything clear in searching for this same topic.

No this is not possible within Formscentral. You could export a PDF without a submit button (an option when saving your form as PDF) and then in Acrobat add a submit button to your form and have it automatically sent to the email of your choice. This kind of workflow falls outside the scope of Formscentral.
Andrew

Can Verizon add the pay date to the e-mail that is sent for billing reminder.

Can Verizon add the pay date to the e-mail that is sent for billing reminder.
Then you would have to sign on to look that up.
Your current bill
for your account ending in 4609-00001 is now available online in My Verizon
Total Balance Due:
$261.11
Keep in mind that
payments and/or adjustments made to your account after your bill was
generated will not be reflected in the amount shown above.

The email is quite direct. Log on to my verizon at www.verizonwireless.com and on the front page it tells you your due date.
as a rule unless you requested paperless billing, you will get a paper invoice in the mail as well.
it is due before or on your account closing date. My service runs from the 5th. of the month until the 4th. of the next month so the bill must be paid on the 4th. at the latest. (if paying on line)
if you pay by check you have to mail it at least five days in order for it to reach the payment processing center, or you can pay at any verizon wireless corporate store via check, credit card or bank debit card.

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

How do I change my signature & other text on my outgoing e mails sent from my mobile?

When I bought my Blackberry Torch 9800 (2 years ago), I (somehow) managed to add some text giving my name, & my 2 business websites so that it appeared at the bottom of all outgoing e mails. At the same time, I deleted the wording that said something like 'message sent from my Blackberry'.
I now need to change the message (& also want to re-instate the fact that it comes from my Blackberry as this explains a brief reply when necessary'.)
I don't think I did it from any settings on the mobile. I think it was done 'somehow' on my main computer.
Any ideas??
Thanks
Solved!
Go to Solution.

Hello christinebennett
Please refer to this Knowledge Base to Modify your signature.
KB29458 : How to modify the signature for an email address integrated on a BlackBerry smartphone
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

MfE uninstall - Sent via Mail for Exchange still e...

Hi,
On my new N97 I accidentally installed MfE trough the Wizard. Later I removed MfE succesfully, but now in the Contact list, under E-Mail there still is an entry "Sent via Mail for Exchange".
How can I remove that entry?
Best regards,
Wouter

Check in Messaging and see if Mail for Exchange is still listed as a folder.
If so, go to Options, Settings, E-Mail and you migth be able to remove it from there.

Outbound exchange mail being sent via SMTP instead of activesync

This is kind of an advanced configuration and question, I'm pretty sure this is a bug but not sure how to get it to the right audience. I have several email accounts configured on my iPhone, two of the accounts share the same email address but are on two different servers; one an Exchange and the other a POP/SMTP server. The reason for this is that my domain has two MX records, the POP/SMTP being set up with a lower priority and acts as my backup server in the event my Exchange server is unavailable. The POP/SMTP server is hosted by registrar, where I host my own Exchange server.
What I noticed is that when I have my POP/SMTP account set to active, any outbound mail I send via my Exchange account is being sent via my POP/SMTP account and NOT the activesync connector for the Exchange account. This shouldn't be happening, how do I report this to Apple?
-Keith

Anyone out there have a fix for this or know if this issue even hits Apple's radar for a fix?

Outlook add in prevents mails from being sent

I have installed iCloud 2.0 on my work PC which works with an exchange account. Intermittenly mails will stay in my outbox and not be sent.
On clicking send, the mail goes to the outbox but doesn't have the proper icon, it still has the "draft" icon and will not send. When I disable the iCloud add-in within outlook, the mails will send fine. Is apple aware if this issue? I read in a few places other people also have the issue and does anyone have a fix for this ?

This is 100% an issue. Very annoying. Glad I found this thread. Thanks.
Here is how to remove the add in:
http://blog.techhit.com/55637-how-to-find-and-disable-outlook-2010-add-ins-and-p lugins
Disabling unnecessary plugins is a great way to make your Outlook start faster, run more reliably, take less memory. In Outlook 2010 Add-ins are listed under “File Tab->Options->Addins”.
To Disable Outlook 2010 COM Add-ins
Select “COM Add-ins” in the Manage drop-down at the bottom of the ”Options->Addins” window and click “Go”. Note: To get to the Options window, click on the File tab first.
Uncheck any add-ins that you are not using.
Click OK.
You may have to restart Outlook; although I didn't.

Add "Sent via" Line To Outgoing E-Mail From TREO 700wx

Similar Messages

Maybe you are looking for