Add u0093dangerous indicator profileu0094 flag in outbound IODC u0093wp_plu02u0094
Dear All
I want to add dangerous indicator profile flag in outbound IODC wp_plu02 please help how we can flow it
I am configure this scenario in SAP IS Retail, and I want to flow that indicator with article master IODC
With warm Regards
Amit shivhare
Similar Messages
-
BDC- To add ABC indicator in MM02-- MRP1
Hi,
I am working on BDC- To add ABC indicator in MM02--> MRP1.
Problem -->
In some material+ plant - Reorder point is there. In this case I need to take additional 'BDC_okcode' for ENTER.
HOW CAN I DO THIS?
I tried it with 'Select statement' between the Perform statement, but it's not working?
IF wa_file-matnr IS NOT INITIAL.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_field USING 'RMMG1-MATNR'
wa_file-matnr.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(11)'.
PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(11)'
'X'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMMG1-WERKS'.
PERFORM bdc_field USING 'RMMG1-WERKS'
wa_file-werks.
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING 'MARC-MAABC'
wa_file-maabc.
SELECT SINGLE minbe INTO v_minbe FROM marc
WHERE matnr = wa_file-matnr
AND werks = wa_file-werks.
IF v_minbe GT 0.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
CALL TRANSACTION 'MM02' USING it_bdcdata MODE p_mode MESSAGES INTO it_msg.Hi,
Try to use Bapi and see ..Please find the sample code.
LOOP AT t_itab INTO wa_itab.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = wa_itab-matnr
IMPORTING
output = wa_headdata-material
EXCEPTIONS
length_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
prepare the follwing structres ( plantdata,headdata, plantdatax) .
* Select the MRP view
wa_headdata-mrp_view = 'X'.
* Call the Bapi to create the MRP view.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = wa_headdata
plantdata = wa_plantdata
plantdatax = wa_plantdatax
TABLES
returnmessages = t_return.
ENDLOOP
Regards,
Nagaraj -
I want to add Tax indicator colomn in script for PO
Hi Gurus,
I want to add Tax indicator colomn in script in customized objects for Purchase order. How to give the condition for tax indicator. if the tax is applicable in item level it should give YES or NO, Please provide some possible solutions.
Thanks,
V.V.Hello,
If tax is not applicable at PO line, it will be blank or 'U0' at field EKPO-MWSKZ. In the customized print program, you may read this and pass the value to the script.
Thanks,
Venu -
Add new line item in existing outbound delivery
Hi,
I am trying to add new line item in existing outbound delivery with material number and quantity.
for this i tried BAPI_OUTB_DELIVERY_CHANGE and LE_MOB_DELIVERY_UPDATE.
but both fm doesn't work and this will not add new line in that delivery.
please help me how can i add new line item in delivery.
I hope someone will help me........plz
ThanksThis kind of question is about to become a FAQ, I think....search the forum for similar questions.
-
Add an u0093Allow Timewriteu0094 flag to Cost Centres
Hi,
I have these queries regarding CATS & Costcentres. Any suggestion to these queries will be a great help to me.
I need to Add an Allow Timewrite flag to Cost Centres to indicate when CATS Timewriting entries are allowed to be received by a Cost Centre .
How to add a validation to the new field to ensure that, once the Allow Timewrite flag has been activated for a particular Cost Centre.
How to change the current CATS rule that is in place to prevent timewriting from being entered against any Cost Centres which have a Cost Centre Category (KOSAR).
Regards,
Prasun PodderHi Rammi,
1.You can use rsecadmin for creating authorization objects.
Use zcc_all and in value authorization use cp *
Now in create a role with desired queries and add
S_RS_AUTH BI Analysis Authorizations in Role
BIAUTH BI Analysis Authorizations: Name of Authorization add zcc_all
attach this role to the User/s
2. For specific values create auth obj with appropriate name and assign specific values. use that obj in a role and attach the role to user.
Whenever there is new Cost Center add that to auth obj instead of adding it to user.
You can search more on the t-code rsecadmin.
I hope this will help you -
How to add Total Quantity in Inbound and Outbound Delivery screen
Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
BhuvanaHi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo -
I love the feature in Outlook that lets me flag a message for follow-up and automatically adds a default reminder at the end of the day. Is this something I can configure my Blackberry 9900 to do (running 7.1)?
As far as I can tell, when I flag something for follow-up, it adds a flag but does NOT add any reminder alerts. If I want to do that, I then need to manually add the reminder and set it (which is a little cumbersome).I guess timed message is on the wish list
However in all my forms I use following scenario to validate all data entry at one time and then submit...
I use regular button and add code in Click event
JS example.....
var errorFlag = 0;
var errorMsg = "";
if (validation expression 1) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message1" + "\n"; //\n for new line with in the message
if (validation expression 2) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message2" + "\n"; //\n for new line with in the message
//finally
if (errorFlag > 0) {
//>0 indicates there are one or more errors
xfa.host.message(""+errorMsg);//display all messages at one time
exit; //now since there are validation errors you can stop processing further and exit the event
//add submit code......here.... -
Need to add spcl indicator as drop down in d first 2 tabs of d tcode FBCJ
Hi,
I need to add an extra field special indicator (UMSKZ) as a drop down, in Cash Payments & Cash Receipts tab of tocde FBCJ.
As suggested by sdn I have added the field (UMSKZ) in the CI_COBL structure . Which in turns enhance ISCJ_E_POSTINGS structure. After that I tried to modify the 'FTCJ_E_POSTINGS' control by following path. Configuration > Table Settings > Click on Administrator button . But here you cant add the extra field. But here you have to modify the control FTCJ_E_POSTINGS to include that field ........ Is there any exit available to modify the control FTCJ_E_POSTINGS or any configuration is required or any other way of doing this .
For sdn reference visit the url > add new filed to table control of fbcj
Please let me know asap. Its very urgent.......I got the solution finally & it is working fine now . You need to enhance(Implicit Enhancement) the function module 'FCJ_CHECK_EXTENDED_FUNCTIONS'. Here take a variable as company code. Assign I_COMP_CODE to ' 'RU01'.'
At last once the code gets executed assign your company code to i_comp_code.
data : l_comp like t001-bukrs.
clear l_comp.
l_comp = i_comp_code.
i_comp_code = 'RU01'.
i_comp_code = l_comp. -
I want to add boolean indicator
i wan to add boolean indiactor please help me frnds
Solved!
Go to Solution.Create a boolean indicator. Put it in a single frame flat sequence structure with the List Names property node and wire a True constant to the indicator. Now when that frame of the sequence structure executes, the boolean will be set true the same time the data is going into the property node.
Of course you need to have a way to reset the boolean indicator to false at the beginning of the program. So wire a False constant into a local variable of the indicator and be sure that piece of code executes at the beginning your VI's execution. -
Centro alarm won't sound, won't add the indicator in the corner
Sorry if this is a repeat, but I've searched the forum and I can't quite find this exact problem.
When an appointment time arrives, instead of sounding the alarm, the phone wakes up briefly, lights up the screen (with the keyguard message), and then goes back to sleep. No alarm, and no little blinking indicator in the corner. If I fiddle with the calendar for a while (adding or deleting appointments), then the alarms may all wake up at once and they all get added to the backlog list. But when the next appointment comes, the alarm is ignored again.
This has happened twice in two weeks with my new Centro. The first time, it fixed itself somehow, but now it's happening again.
I'm a first time Centro owner, but a long time PalmOS user. Yes, I've checked the ringer switch, yes, I've tried a soft reset, yes I've disabled background on PocketTunes, yes, the time is set correctly.
Is there a known bug, or a known interaction between other software? I've turned off Graffiti Anywhere, and disabled Fonts4OS5, but nothing helps.
Post relates to: Centro (AT&T)Are you sync'ing the Centro to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
If you are, you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=att
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705 -
Rollover Buttons: How to add an indicator to my buttons?
Hello again-
I'm using the button widget to make a rollover button, but I would like to add a little colored square to my button to show the reader what page he's on. In other words, if he's on the home page, and he clicks the Contact Page link, when the Contact page loads, I want the Contact Page button in the menu to display a little colored square. Know what I mean? How do I do this?
I'm using the latest version, on a Mac. Thanks-Please always mention your jdev version as the solution might depend on it.
Why do you use an input text if the use can't enter text in it?
If the width of the input text is fixed, you can write a bean method which returns width-3 chars from the text and add '...' and use an EL to shoe it in the ui.
Or you add an output text behind the input text showing '...' when the length of the text is bigger then the width of the input field. Put an EL on the visible property of the output text to only sore it then.
Timo -
How to add a button to VL01N Create Outbound Delivery
Hi,
I seen various user exits in this program SAPMV50A (VL01N), but can I enhance the interface by adding a new button (without copying SAPMV50A to ZSAPMV50A, etc)
DellHi
I think you can't do it
Max -
Outbound process red flag - how to restart?!
Hi, well i tried in a previous post to get help but i guess it was a little misunderstanding.
I have a well processed message but it's not being send to target system, so i get a red flag on column outbound status in SXI_MONI. It's like a system is not available but in this case it is.
It is File to IDoc Scenario and be sure that i already checked SM59, SX1, SX2 and so on.
Funny thing is that sometimes message is send properly - when CC read one file - but when it has to read >1 outbound status will be set to error for each message!
has somebody any clue on this issue?!
br!!Hi,
it's a FILE2IDoc Scenario i am getting no error at all except of the red flag for outbound process. In detal-view of the message nothing is reported an even the CC-Monitoring is showing nothing because IDoc-Adapter is not part of the Adapter-Engine.
That's the problem! Because a target systems is connected via VPN to the gateway of the XI. And when the VPN is not active, the message is not being transmitted. But in XI i connat restart it when VPN-Tunnel is active again.
Any clue on how to restart?!
br -
Attachment Indicator in Inbox Result list
Hi Forum,
do you know if it is possible to add an indicator(Flag) in the Inbox Result list that indicates that the E-Mail or Service Request has an attachment ?
Thanks a lot !!!!Hi,
You can create an attribute of type boolean. Set the property of the attribute as ICON in the get_p method. Afterwards, in the do_prepare_output of the field set its value to 'X' when there is an attachment and SPACE when there is no attachment.
Follow the steps.
1.) Create the attributes in respective context node of the view in the component.
2.) Generate the GETTER & SETTER, GET_P methods for these attributes.
3.) In the GET_P method of the attribute, define the field type as image.
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
rv_value = cl_bsp_dlc_view_descriptor=>field_type_image.
ENDCASE.
4.)In the GETTER method assign the image url to the 'value' attribute based on the conditions,
IF 'X'.
value = cl_thtmlb_util=>get_icon_url( 'image1.gif').
ELSE.
value = cl_thtmlb_util=>get_icon_url( 'image2.gif').
ENDIF.
Regards
Prasenjit -
Error on outbound processing (- to IDoc), nodetailed error message
Hi guys!
I'm facing a problem with sending IDocs to R/3. My messages have red flag in outbound status, but there is no detailed error message. Everything seems to be ok, but my IDoc doesn't arrive to R/3 and there is that red flag in XI.
What could cause this? It seems like there is some communication problem. Any ideas?
Thank you,
OlianHi,
IT will give the status number,what is the status number in IDOC check it and update the thread.
if u find its a data problem u can debugg the FM,go to WE19 and give ur IDOC number and there u will find the option start out bound processing form this opion u can debugg the code and know wat is the error.
Check ur ALE settings.
STEP 1:ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1) Create an RFC Destination to the Sending System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in SAP R/3 towards other system
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) Create an RFC Destination to XI in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Outbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
5) Create Customer Distribution model in the transaction code BD64
1) Click on the Create modal View button and enter the short text, Technical name etc as shown below
2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3) Save the Distribution model
Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
Then, you will be intimated about the partners, port creation, and outbound parameters creation
4) Distribute Customer Distribution Model
In the menu item GO to Edit->Modal View-> Distribute to the destination client
Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
Regards,
Phani
Reward points if Helpful
Maybe you are looking for
-
I'm trying to print a report directly to the printer and it's being hard. To see the report in the screen it's easy but to the printer it always gives an error. Is there a way that i can print to a local printer? I'm trying to set destype to printer
-
Hi all, My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start. This happened on Windows 7 in 2012 and was eventually fixed. Any advice on what I should do? [I can't find where to post a question
-
I need to write a program where I can drag and drop icons between and within a split pane. Any suggestion of what package I should look into? thanks
-
I downloaded -i-tunes 8.1 because both of my computers are G-3; the Mac Pro lap top has intel, my i-mac does not. When I try to access i-tunes store on the mac pro I get the page for CLOUD. I can access the account, but am unable to access i-tunes
-
Dear All, I am using mdx in EvEXP for filtering the members of a dimension. I am having 2 properties in my dimension- Test1 and Test2. Test1 has values A and B. Test2 has values C and D. I wish to filter out members using the combination: (A and C or