Add VISA Transaction Amount Free of Cost

Hello,
During my project work, I generate Purchase Requisitions for most equipment, but occasionally use the company VISA for  purchases.  My company does not have the module to pull the VISA information directly into SAP. 
Is there a method that can be used to place the VISA transaction amount into the SAP project (WBS Element), but not have this amount charged against the project in the SAP system?  Using the Free of Cost AcctAssgntCateg Desc, does not allow the use of the WBS element in the Item Account Assignment field.
I have developed a report to pull all Purchase Orders against the project (WBS Element), and would like the VISA transactions to be shown in the report.

I found a Stat check box in the ME23N/Item/Conditions tab.  I don't have access to this check box at my user level.
Are you suggesting that if this Stat check box was deselected, the item cost would not post to the GL account?

Similar Messages

  • Is it possible to add a target amount to a query

    If I have a number being disagregated by Cost Center is it possible to add a target amount on a cost center level? I know we could add an attribute to Cost Center that hold a value for this target, but that could not be used in calculations or be shown in chart compared to the actuals. Does this have to be added to the cube as a Key Figure or is there an easier way?

    Hi.
    You can use IP module to enter/update target KF.
    Regards.

  • Problem regarding Purchase Order with Free of Cost Material

    Dear Xperts,
    I am facing problems while doing Goods Receipt of a Purchase Order having all the materials we are going to receive Free of Cost from the Vendor.
    This case is happening with Doemstic and as well as Importer Vendors also.
    Problems to be solved:
    1. If we are using Tax Code(with excise conditions) ,excise duty calculation does not take pace automatically at Goods Receipt as the Material Value is Zero on which the duties will be calculated for a Manufactuing Plant.
    2. This case seems very problammatic if that Purchase Order is having almost thousand line items.The user has to enter all the Excise duties manually for each & every line item during Goods receipt in a manufacturing Plant.
    3. In case of Importer Purchase Order also, the CVD portion & CESS on CVD portion user has to enter manually.
    4. To solve this problem we are  not using Free Goods Indicator in PO, we are entering 0.01 paisa , but during the MIRO of Planned Delivery Costs , the system is not showing or providing POP-ups of those relevant condition types to the user to enter the actual amount.
    Please advice, how can we proceed in this case.
    Regards,
    Soumick

    First you are putting 0.01 value . So the planned delivery cost is not showing coz if say tax is 8% then 0.01 x 0.08 will be  0.0008. It will take first two digit after decimal and hence its 0.00 and hence plannded delivery cost is not showing.
    If you put 0.5 you will be able to put planned delivery cost in MIRO
    Now regarding value is zero and how will the import duty be calculated. May be make a  pricing routine where in the custom duty is not calculated on this base price 0.5 or 0.01 but on the actual value if it was not free of cost and that value you can maintain  through MEK1 transaction code.
    And while posting MIRO or MIGO you need to identify that these are free of cost material and use BADI fi_ac_document
    and may be replace the actual GL with some other GL so that 0.5 or 0.01  does not add to your inventory cost and you could knock off later.
    Regards
    Sangeeta
    Edited by: Sangeeta Khurana on Feb 6, 2012 1:37 PM

  • Free of cost supply for Rejected item

    Dear All,
    Please help me in the following scenario :
    a. A line item ( Imported item )rejected  by quality .
    b. For that rejected item foreign supplier send us the same material in free of cost . No need to pay for that item.
    c. I paid the freight and customs duty  for both rejected item as well as for free of cost item .
    My questions :
    1. How to make GR for free of cost in the same P.O ???
    2. How to account the customs duty and freight that has been  paid twice for the same item ???
    3. Can i avail cenvat facility for both item .???
    Please clear ....
    Cheers,
    Somu

    Hi
    If the PO is not taken into GR then add the item once again in the PO and chec the FREE GOODS checkbox. By this check the GR taken will not affect the cost of this item.\
    For the double payment made already , you can create a credit note for the vendor in MIRO [Subsequent credit], by choosing the amount and entering the articles.
    On confirmation of MIRO the value will be reduced from these articles in proportion which was actually increased due to double payment.
    Hope this helps.
    Regards
    Govind.

  • Exicse for free of Cost Material

    Hello,
    I have a question regarding Excise on Free of cost Material. When we are sending material to Customer as a sample or free of cost then we do not pass any accounting entry for the same during VF01.
    In the above scenario how do we capture the excise in our system..Please guide me.
    Br,Vivek

    Hi taurian,
    This is very simple.
    in the Pricing Procedure for FOC, shall I maintain the Excise Condition Type as Statistical?
    for this no need to Specify statistical for condition types because after delivery subsequent billing is proforma.because this value should not post to accounts,that's why we create proforma invoice.So even without specifying statistical accounting document will not be generated.
    but as per central department of excise we should pay the duty while goods leaving from factory.So that we should post this excise conditions amount to the accounts.
    So create subsequent excise invoice then accounting document will be generated.system will calculate the excise condition amounts based on basic price you maintained in V/08,system does not bother whether basic price condition type is statistical or not.
    For your understanding:
    Configuration:
    order type FD,Item category-KLN,Schedule line-CP
    Delivery type LF
    Billing type F8 (delivery related proforma)
    Sales cycle:
    Va01>vl01n>vf01>j1iin
    Let me know for further clarifications.
    Thank you,

  • Free of cost sale in Manufacturing

    Hi,
      We have one manufacturing plant, as when we create the invoice the customer account is debited and the excis etax account are creadited now in case of free of cost sale we required that insted of customer we have a different GL account the total invocie amount of inovice should be debited to that GL account insted of customer and the tax account should be credited as per regular process, so what setting cam be done to this, but SO, delivery and billing shold be done on customer name only.
    regards,
    zafar

    Hello
    Your most of the requirement should get solved by use of Item Cat TANN.
    I hope the following SDN thread will be a good referenc for your requirement.
    - free goods Accounting
    - Excise in free goods sale
    Regards
    JP

  • Free of Cost Import Order

    Hell All,
    Could u pl. help me out ?
    I have an one senereio. We have received the imported material on free of cost basis. But we need to pay custom duty for this transaction to custom vendor. If i create PO with Free of cost tick at an item level then the condition tab gets disapperar. But i need this condition tab as i am manually updating the assesable value in that so that the cutome duti's gets calculated. In our import pricing procedure we don't have condition type for Discount other wise i could have maintain 100% over there.
    Now please give me the solution how can i create the purchase order? so that i could pay custome duty to custom vendor..
    Thanks in advance.
    Shailesh

    dear,
    there is not a std solution
    but, i have a work around solution
    u have create a PO with notional value (very negligible value 0.01 USD)
    then u can able to capture the customs duty in MIRO
    regards,
    snb

  • Problem with new pricing procedure - free of cost

    i set up a new pricing procedure where i have zsed (special excise duty) and zmws (sales tax) set as manual, it's not valid on some free sample orders. but when i goto create order it does not show up under conditions, even though i've maintained it for that material in vk11. and when i click on condition type in conditions, it doesn't show up in the drop down either (at the order level). if i just type zsed it says zsed cannot be processed manually.
    but if i change the pricing procedure and take off the manual check mark, the tax shows up on the same order automatically (from vk11) but i can't delete it there.
    suggestions? i need for it to show up or have an option where if it shows up i can delete it. thanks!

    fyi,
    If you set the "Manual" indicator in pricing procedure against to any condition type, then you can enter this condition type value in particular transaction. ( But for this condition type details, " changes can be made- setting maintain as "D" not possible to process manuall). Same "manual" logic in the pricing procedure will not work.
                  Because controls in Condition type has priority than anyother.
    Now coming to your question,
               If I understood it properly,
    ZSED is not applicable to every free of cost order, but it may be applicable to other orders ( excl: FOC orders). Expecting ZSED Condition type maintained in both pricing procedures ( FOC sales pricing procedure & non FOC sales procedure).
    if you set the " Manual entries has priority"/ tick mark delete check box in ZSED, then it will allow to enter manually/delete the condition type in FOC order as well as non FOC orders too.
    Then there could be chance that user may delete/manually enter ZSED in non FOC sales.
    better way would be, create new conditiont table by including Sales document type ( assume you created new document type for FOC sales) with other required fields ( eg: customer/material etc..,).
    assign this condition table in top of all the accesses in ZSED's access sequence.
    Maintain Condition record.
    By doing so, Condition record is applicable only to FOC doc type sales- if maintained , else it will search next condition record.
    which will not effect the non FOC sales & user cant delete ZSED from non FOC sales.
    Hope it helps

  • Warning for header po delivery cost but with only free of cost items

    Dear.
    Do you know If exist a chance to send a warning If I insert in a purchase order a header delivery cost condition type but the items of this po are only free of cost ?
    Thanks.

    Dear Chris,
    As per my knowledge this cannot be done in standard SAP because
    When we create PO line item with Free goods indicator set automatically item conditions tab correctly disappears
    But the header condition tab always will be there because " In a PO you may have 6 line item out of them 3 is free goods and 3 is not " That is the reason Header conditions tab is there.
    But you don't really have to worry because if you have only 1 item with Free goods indicator set and you enter a amount for header freight you will find the field condition value by default Blank and you cannot enter a value there , so no need to worry no postings will be made.
    Now say you have PO with 3 line items (out of which1 with Free goods indicator) and you enter a header freight 100 EUR
    You will find now that field condition value is not becoming blank and the amount 100 EUR is distributed among 2 non free Goods item proportionately.
    Hope it clarifies

  • To add new transaction key

    All SAP Gurus,
    We want  to add new transaction key in account determination (OBYC).
    How to add it?
    Regards,

    Hi Rajan,
    If you are talking about the transaction key at Materials Management postings (MM) group (RMK),
    it is merely not advisable to create a transaction key.
    You have General modification like BSA, INV etc for differentiating the postings.
    The transation key mentioned in the earlier mail is for below purpose:
    To enable the system to find the relevant account for provisions (
    accrued delivery costs or miscellaneous provisions, for example),
    must assign a transaction/event (internal processing) key to each
    condition type that is relevant to provisions in the step Define 
    Calculation Schema.                                              
    Cheers
    Arun.

  • We have to add about 900 email address to cost center master data. Whats th

    Hi sap guru's,
    We have to add about 900 email address to cost center master data. Whats the best way of achieving this?
    pls help me.
    Thanks in advance,
    RAVI

    Hello Ravi,
    I do not see any email ID field in the cost center master. You may insert the ID in one of the available address fields. You may use LSMW or BDC to upload the same or even mass processing transaction KS12.
    BR // SG

  • Sales Quotation - Items free of cost

    Hi,
    In my sales transaction I am giving some items as free of cost. These items are inventory items. The price of this free item should be displayed but at the same time it should not be added in final total.
    How to do this?
    uday

    Hi Uday,
    Are you using any excise tax code for this free of cost sales? If not then you can use Assessable Value field to show the unit price.
    Last option will be to create one UDF.
    Hope this will help you.
    Regards,
    Abhishek
    Edited by: Abhishek A on Dec 4, 2008 3:32 PM

  • Free of cost Material

    Hello,
    We have a scenario in which their exists a material ( finished trading goods ) having moving average price as price control indicator is V.
    Suppose stock of material is 1 now with moving average price as V, hence total stock value is 100.
    Now we receive the same material from the group company as free of cost i.e without any value.
    Is it possible in standard SAP that moving average price should remain at 100 with stock qty as 2 when GR for free of cost material is done ( I think this could be achieve by defining the new movement type and settings in customization with only qty update and no value update ).
    Even if we achive the above thing stock value would be 200 as stock qty 2 and moving average price as 100.
    Is it possible in standard SAP to keep the stock qty as 2, MAP as 100 and stock value as 100 after receipt of material as free of cost.

    first of all free goods tick is available in PO line item.
    second scenario
    if you have 2 quantity with moving average price 100 so total value will be 200
    if you did GR of 2 quantity free of cost then no value will be added. the total stock value will remain 200 for quantity 4. but MAP per piece will change to 50. so stock 4 total value 200 MAP will be 50.
    regards,
    qsm sap

  • Free of cost item sale.

    Hi all,
                It is a my claint urjent requirement free of cost item sales where we will define that, what is the order type, how i have to explain  them any body plz give me some help .
       Thanks in advance for your support and help.

    hi,
    am not sure if understood your requirement. But anyways, we have sales document type FD which allows free of charge deliveries.
    You can uses a free of charge delivery to send materials free of charge to your customer.
    Process Flow
    The system cannot create a delivery without a sales document, so you have to create a free of charge delivery as a type of sales document.
    You create a sales document with the order type for free of charge deliveries.
    In Customizing you can block the free of charge delivery from being delivered. Go to Sales > Sales Documents > Sales document header > Define sales document types, and select the Delivery block field in the Shipping section.
    For free of charge deliveries, you can do one of the following:
    Approve it by deleting the delivery block.
    reject it by entering a reason for rejection.
    Pl clarify if this what you are looking for.
    Thanks,
    Sadhu Kishore

  • Can i get Adobe Photoshop CS2 for free of cost?

    I have came across that photoshop cs2 is coming legally free of cost

    As gener7 has pointed out there is no "free Photoshop CS2", it has been made available for people who hold legitimate licenses for versions affected by the activation server having been taken offline and a lot of people seem to have misunderstood that.
    While it may be tempting to ignore the distinction it may be worth considering that Photoshop is still the product of other persons’ efforts (no matter how the profits are being distributed between the corporation Adobe and the individual developers etc.) – supposing you do produce images yourself (as a photographer, designer, illustrator, …) how would you feel about people assuming because you publish them online they are theirs to use for free?
    Maybe you should consider using the free image editing application Gimp if your economical circumstances should not allow for purchasing a Photoshop license currently.

Maybe you are looking for