Adding a note in Demand Management screen

Can I add a small 'note' some text verbiage like a memo in the demand management screen ( MD61, MD62, MD63).
THANKS

Dear,
You can enter a text in MD61/Md62/Md63 in the following
You can enter the text for the schedule line or item text
In table tab page select the  line and
Goto -->item ttext...system gives the pop up no text exisits ...enter, it will take to the screen where you can enter the text
goto Schedule line tab page
Selcet the schedule line
Goto -->schedule line text...system gives the pop up no text exisits ...enter, it will take to the screen where you can enter the text
come bck if required

Similar Messages

  • SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

    Dear Experts,
    I am configuring the mass transfer from SOP to Demand Management.  I want to maintain the variant for the program RMCA0766 so that I can create the Mass transfer job.
    But I get the message RMCA0766 does not exist.  So, How do I generate this program in the client?
    Any help would be greatly appreciated.
    Reagrds
    Tom

    Hi,
    Please refer the below document. It speaks about the mass processing on SOP.
    http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
    Hope you will get the answer you needed.
    Regards,
    Manimaran M.
    Edited by: M Manimaran on Aug 9, 2011 8:01 AM

  • Workflow Start "Failed But Not Blocking Correlation" - Project Server workflow for Demand Management

    Hi,
    I'm trying to "Create a Project Server workflow for Demand Management" with project server 2013 just like is explained
    here.
    But when I try to create a new project the implemented workflow failed to start with the follow state message in the job queue: Failed But Not Blocking Correlation.
    The detailed error display the follow message:
    Exception Starting Workflow: The scope _/SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208_ has no workflows under it. HTTP headers received from the server - ActivityId: 52fef415-409b-4545-a9f6-ed75519b425c.
    NodeId: My-Computer-Name. Scope: /SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208. Client ActivityId : 9ded4d9c-7733-7004-2661-c8977270af98.. Trace:    at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
    request, T content)   at Microsoft.Workflow.Client.WorkflowManager.StartInternal(String workflowName, WorkflowStartParameters startParameters)   at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.StartInstance(String
    serviceGroupName, String workflowName, String monitoringParam, String activationKey, IDictionary`2 payload)   at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.StartWorkflow(WorkflowSubscription subscription, IDictionary`2 payload)  
    at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid, Boolean isNewProject, Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
    WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow' uid='e3bbb06b-1d38-e311-940a-001cc094718e'.
    Error:
    WorkflowCannotStartWorkflow (35100). Details: id='35100' name='WorkflowCannotStartWorkflow' uid='e4bbb06b-1d38-e311-940a-001cc094718e'.
    Queue:
    GeneralQueueJobFailed (26000) - WorkflowStartWorkflow.WorkflowStartWorkflowMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='e5bbb06b-1d38-e311-940a-001cc094718e' JobUID='68ee1040-1d38-e311-940a-001cc094718e'
    ComputerName='90f7432c-fbc8-4ebd-86f3-0236ce62661c' GroupType='WorkflowStartWorkflow' MessageType='WorkflowStartWorkflowMessage' MessageId='1' Stage='' CorrelationUID='9ded4d9c-7733-7004-2661-c8977270af98'. For more details, check the ULS logs on machine
    90f7432c-fbc8-4ebd-86f3-0236ce62661c for entries with JobUID
    68ee1040-1d38-e311-940a-001cc094718e.
    with this detailed entries in the log file
    10/18/2013 13:47:57.38  Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                 Queue                        
     ad3fy Critical Standard Information:PSI Entry Point: <unknown>  Project User: <unknown>  Correlation Id: <unknown>  PWA Site URL:   SA Name: <unknown>  PSError: <unknown> A queue job
    has failed. This is a general error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued
    jobs) and the trace log (which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 68ee1040-1d38-e311-940a-001cc094718e. Name of the computer that processed this job: 90f7432c-fbc8-4ebd-86f3-0236ce62661c
    (to debug further, you need to look at the trace log from this computer). Failed job type: WorkflowStartWorkf... 9ded4d9c-7733-7004-2661-c8977270af98
    10/18/2013 13:47:57.38* Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                 Queue                        
     ad3fy Critical ...low. Failed sub-job type: WorkflowStartWorkflowMessage. Failed sub-job ID: 1. Stage where sub-job failed:  (this is useful when one sub-job has more than one logical processing stages). 9ded4d9c-7733-7004-2661-c8977270af98
    10/18/2013 13:47:57.38  Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server                 Queue Jobs                   
     ad3fy Medium   Error is: GeneralQueueJobFailed. Details: Queue Attributes:  68ee1040-1d38-e311-940a-001cc094718e  90f7432c-fbc8-4ebd-86f3-0236ce62661c  WorkflowStartWorkflow  WorkflowStartWorkflowMessage  1   
    9ded4d9c-7733-7004-2661-c8977270af98  . Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified. 9ded4d9c-7733-7004-2661-c8977270af98
    Any idea?
    Thanks in advance,
    Alexander.

    Hi Alexander,I have seen that error when the workflow manager has not been registered correctly with the PowerShell command - that should be in the docs referenced - or
    http://technet.microsoft.com/en-us/library/jj663115.aspx.  Let me know if that doesn't appear to be the issue here and I can dig deeper.  Best regards,  Brian
    Blog |
    Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
    Project Server TechCenter |
    Project Developer Center |
    Project Server Help | Project Product Page

  • I'm trying to add my Linux netbook to my sync account but both my windows computers will not show the "Add Device" button in any of the sync management screens

    I'm trying a new Linux build on a net book that I use for playing with non windows OS. In the process of setting up the fresh OS install I wanted in get my Firefox account set up to that I didn't have to spend lots of time working on that one thing. I'm no stranger to the browser sync and have attached several of my computers and tablets with a number of different OS to the account with little trouble including the Firefox of the previous Linux build that was on the net book. The problem now is that on both of my to main computers, a windows 7 desktop and a windows 8.1 tablet, both running the latest Firefox, I am unable to find the "add device" button in any of the sync management screens. This includes the browsers built in options screen as well as the Firefox manage account page. The first gives me options for disconnecting the account, going to the manage screen, several check boxes for what can be synced, and the device name. The manage screen, after logging in, only give me options for signing out, changing password, and deleting the account. Any help figuring out why the add device button seem to be missing from both these devices would be greatly appreciated.

    Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.

  • Migrated VM does not update Manager screen

    Hi
    I have 2 servers in my server pool. From server1, if I perform a manual migration thus:
    xm migrate 50_rac22 server2
    The VM migrates successfully however the VM Manager screen still shows server1 as the host server. This is a problem because I can't activate the console on this (because the console tries to connect to server1)
    Is the host server entry maintained within the VM Manager database? How is this updated?
    Thanks
    Simon

    Hi
    I have 2 servers in my server pool. From server1, if
    I perform a manual migration thus:
    xm migrate 50_rac22 server2
    VM migrates successfully however the VM Manager
    screen still shows server1 as the host server. This
    is a problem because I can't activate the console on
    this (because the console tries to connect to
    server1)
    Is the host server entry maintained within the VM
    Manager database? How is this updated?
    Thanks
    Simonthere is a datacollector process on the manager server to sync the status and the interval is 2 mins.
    is the info get corrected after the 2 mins?

  • SAP Demand Management installation - VAT option?

    Hi,
    I am installing SAP Demand Management 6.4 SP12 for a Swedish client. During the installation of Process Servers using SAPInst, the first screen itself gives me an option for VAT (Value Added Tax). I have to select Yes or No but I am not sure how to make this decision.
    It is true that Sweden has the concept of VAT everywhere, but I am not sure if that is relevant in the context of this installation.
    Do I need to select VAT Yes or No? We have sent the question to SAP but as usual the response takes a long time. No one at customer side also knows what to do. And I want to be correct the first time rather than scrapping the whole thing later because of wrong choices.
    Please help me in understanding this option of VAT and what I can do here.
    Thanks,
    Shitij

    Selected the Yes option because I figured out that this option can be changed anytime later also.
    Regards,
    Shitij

  • Can anyone share how to integrate Demantra Demand Management to EBS R12?

    Hi all,
    Can anyone suggest how to integrate Demantra Demand Management to EBS R12?
    I use Demantra 7.2 and EBS R12.
    I search in Manual and in some blogs but not much data support. If possible, I want step-by-step starting from set up such as setup the instance.
    More of my concern are;
    - Is Demantra can integrate with MRP, without APS or ASCP?
    - Is that necessary to integrate by using seed data? If I implement my series with all new series, how can I suppose to link them to EBS?
    Thank you in advance.
    Best Regards,
    Tanya T.

    Hi Tanya,
    To begin with, you can refer to the Metalink doc 434991.1 for an in-depth explanation on the integration from a technical perspective. Apart from this, there is an ocean of knowledge in the Demantra Documentation libraby in the metalink.The Implementation Guide provides an overview of the integration processes that synchronize or move data between Oracle Demantra and E-Business Suite applications.
    Now coming to your concerns:
    - Can Demantra be integrated with MRP, without APS or ASCP?
    After going through the above mentioned documents on Demantra, if you still want an integrated instance of Demantra and MRP without using APS, then it will have to be a highly customized solution.This scenario will obviously have a great impact on various business aspects,which is out of scope of this discussion.
    - Is it necessary to integrate by using seeded data?How to link new series to EBS?
    The Demantra - EBS integration adds two new responsibilities for Demand Management viz. i)Demand Management System Administrator and ii)Demand Analyst.
    The System Administrator creates a new user in the E-Business Suite with the relevant responsibility for which the user is automatically created in Oracle Demantra.
    The user with "Demand management system Administrator" responsibility can create new series that get added in the Demand management component on creation. This series can then be used as per requirement.
    I hope my comments help.Feel free for further discussions.
    Regards,
    Shekhar

  • Demand management - Priority of Demand

    Dear friends,
    I have got one requirement as below
    User wish to enter Productwise demand & also the priority , based on available stk of components & SF goods , systems should tell us Which products & How much quantity can be produced?
    I can use one demand version for entering demand for this requirement but How a provision can be made for entering priority? One text field is available for item level but for entering a text you need to do 3/4 steps , is tedious job.
    Please suggest.

    >Dear colleague,
    Unfortunately there aren´t more available fields inisde MD61/2 to update the required additional information.
    maybe you cna use the Req. Plan number. , It is a at iniital screen.
    Myabe you can create a Req.Plan number for each priority.
    This information is also displayed in MD04,
    THis or maybe you can create a new requirement type for each priority. Aa copy to the one you have, and assign this new requirement type  to each item regarding the priority,
    Unfortunately the priority is a concept not used in Demand Management.
    thanks and regards,

  • Data is not being populated in screen field PSPNR after F4 search help.

    Hi expert,
    I have added one field GW_SELECT-PSPNR in existing screen 100, and there are many fields already existing.
    and there are POV for 4 fielda and i added POV for field GW_SELECT-PSPNR.
    PROCESS ON VALUE-REQUEST.
      FIELD gw_select-kostl MODULE determine_kostl.
      FIELD gw_select-aufnr MODULE determine_aufnr.
      FIELD gw_select-matnr MODULE determine_matnr.
      FIELD gw_select-bwart MODULE determine_bwart.
    ***Added by me
      FIELD gw_select-pspnr MODULE determine_pspnr.
    ****end add
    now problem is that the value is not being populated in screen.
    values are coming in field GW_SELECT-PSPNR but in screen its not being populated.
    i tried function module 'DYNP_VALUES_UPDATE' then also its not being populated
    now this module MODULE determine_pspnr has code inside
    MODULE DETERMINE_PSPNR INPUT.
       DATA:w_dynpfields TYPE dynpread,
         i_dynpfields LIKE STANDARD TABLE OF dynpread.
      PERFORM fill_pspnr.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'PSPNR'
          value_org       = 'S'
        TABLES
          value_tab       = gt_pspnr
         field_tab       = lt_field_tab
          return_tab      = lt_return_tab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      LOOP AT lt_return_tab INTO ls_return_tab.
        gw_select-pspnr = ls_return_tab-fieldval(12).
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            input  = gw_select-pspnr
          IMPORTING
            output = gw_select-pspnr.
        EXIT.
      ENDLOOP.
      refresh i_dynpfields.
       w_dynpfields-FIELDNAME = 'gw_select-pspnr'.
       w_dynpfields-FIELDVALUE = gw_select-pspnr.
       APPEND w_dynpfields to i_dynpfields.
       APPEND gw_select to gt_select.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME                     = sy-repid
          DYNUMB                     = sy-dynnr
        TABLES
          DYNPFIELDS                 = i_dynpfields
       EXCEPTIONS
         INVALID_ABAPWORKAREA       = 1
         INVALID_DYNPROFIELD        = 2
         INVALID_DYNPRONAME         = 3
         INVALID_DYNPRONUMMER       = 4
         INVALID_REQUEST            = 5
         NO_FIELDDESCRIPTION        = 6
         UNDEFIND_ERROR             = 7
         OTHERS                     = 8
    ENDMODULE.                 " DETERMINE_PSPNR  INPUT

    Hi
    Use this code instead of your function call:
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield        = 'FEE_NUMBER'
            dynpprog        = sy-cprog
            dynpnr          = sy-dynnr
            dynprofield     = 'FEE'  ================>your field
            value_org       = 'S'
          TABLES
            value_tab       = it_fee
          EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
    Best Regards
    Yossi

  • To whom it may concern      Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E  2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

    To whom it may concern
    Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
    2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
    I look forward to your reply and a resolution of this problem.
    Thank you very much!!!

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • HT204074 I do not see a "Manage Devices" link when I access my account information through iTunes. I want to know how many devices are linked to my account. Can anyone help?

    I have accessed the Apple Support site http://support.apple.com/kb/ht4627 but I could not find the "Manage Devices" link on iTunes. The advice they give is as follows:
    You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    Open iTunes.
    Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
    Choose Store > View My Account from the iTunes menu.
    From the Account Information screen, click Manage Devices.
    Next to each device or computer name, you will be able to see when each was associated to your Apple ID. You will also be able to track how many days are remaining before your associated devices or computers can be associated to a different Apple ID.
    Help would be greatly appreciated! Thank you!

    Hello from Albania,
    Please help me !! I'm desperate
    I sold my iPhone 4s a few months ago.
    Now i got my self a new iPad and created a new apple ID which i recently accociated with ITunes and ICloud.
    However, i can't update anything on my Mac since it still requires the old apple id, even though i changed it anywhere i could.
    I also don't get the manage devices when i tried to do this through the iTunes.
    I have no idea what to do.
    Waiting for your reply.
    Regards

  • FCP will not start not even a splash screen

    I updated my 15" MacBook Pro to OSX 10.6.6 and now none of my Final Cut Pro projects will launch there is not even a splash screen that pops up. When I right click the FCP icon in the dock the only option it gives is to force quit. Has anyone heard of this happening in relation to an OS update?

    Okay. I finally got FCS 2 apps and the App Store to coexist, but not without considerable trial and error. There is definitely some bad blood between 10.6.6 and FCS 2 apps. I haven't been able to pinpoint the exact problem since the behavior I experienced with FCP and Compressor was very inconsistent, but I do have some solutions that might work. I don't guarantee they'll all work as they did for me, but it's worth a shot.
    1) Try launching FCP and waiting as long as you can when it hangs. Several times, if I waited long enough, the splash screen would magically appear and everything would start up as normal, even after a full minute or so.
    2) Delete the Final Cut Pro System ID file and re-enter your serial number after launching FCP. Make sure you have your serial number handy before you try this. The System ID file is located in ~/Library/Application Support/ProApps/. Deleting this file allowed the serial dialogue to come up, and after entering the serial, FCP launched successfully.
    3) If you have the time and patience, I highly recommend a totally clean install of 10.6 Snow Leopard and using the 10.6.6 Combo Update to get up to date. I managed to get a working Final Cut Pro and Compressor using this method, even though it was a pain in the ***. Using the Migration Assistant to transfer your files over will not break FCS2 apps. As a precaution, I did not transfer over any of my System Settings with the Migration Assistant. You can find the 10.6.6 Combo update here: http://support.apple.com/kb/DL1349
    From my tests, I think there is some problem in 10.6.6 with how OS X displays custom dialogue boxes, such as the kind that drop down from the menu-bar or FCS's custom dialogue boxes and splash screens. I get hangs in MAS when it tries to display the Apple ID login and FCS upon launching. The behavior is inconsistent, sometimes hanging for 30 seconds, other times indefinitely, and I don't have the technical expertise to understand why. However, I've ruled out a disk error through a clean bill of health from disk utils and running the same OS config from two different hard drives.
    Here's what I did:
    1. Verified internal hard drive and made a SuperDuper backup of my internal hard drive to an external drive.
    2. Wiped internal hard drive, installed 10.6 Snow Leopard, and installed Final Cut Studio from disks.
    3. Installed the 10.6.5 combo update. Used Software Update to get all software up to date, but unchecked the 10.6.6 update.
    Tested FCP: hang on startup.
    4. Deleted the System ID file.
    Tested FCP: asked for serial number, then completed launch.
    Tested FCP again: launched with no problem.
    Tested Compressor: launched with no problem.
    5. I wanted to test the System ID fix on my old setup. I booted to SuperDuper backup (10.6.6 from Software Update) and deleted the System ID file.
    Tested FCP: hang on startup.
    6. Booted to clean-install (now at 10.6.5) and applied the 10.6.6 combo update.
    Tested FCP: hang on startup
    7. Deleted the System ID file.
    Tested FCP: asked for serial number, then completed launch.
    Tested FCP: initially hung on startup. However, after about 30 seconds, it surprisingly launched with no issues.
    Tested FCP: took about 30 seconds to launch (no hang), but eventually displayed splash and launched with no issues.
    Tested Compressor: same as above.
    8. Migrated data from SuperDuper backup to 10.6.6 clean-install on internal drive using Migration Assistant. Excluded "Settings." I also deleted the System ID before testing.
    Tested FCP: asked for serial number, then completed launch.
    Tested Compressor: launched with no problems.
    Tested FCP: launched with no problems.
    9. I then launched the freshly installed Mac App Store. I clicked "install" for Evernote, and the app hung. However, after a moment, it displayed the Apple ID login drop-down from the menu bar. I entered my credentials and Evernote installed.
    Tested FCP: initially hung on startup, then launched without a problem.
    Tested FCP: launched without a problem.
    Tested Compressor: launched without a problem
    10. I decided to try one last little test. I deleted Evernote and launched both the Mac App Store and FCP at the same time. FCP hung on startup. I clicked "install" for Evernote again, and App Store hung. After a moment, though, FCP completed its launch AND the App Store drop-down asking me for my Apple ID appeared at the same time. This interested me, since it seemed to suggest that these were related incidents.
    I have some process samples from activity monitor for when FCP hung, if someone would find them useful, but I can't read them at all. Console showed the following whenever FCP hung:
    objc[192]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:18:36 PM [0x0-0x15015].com.apple.FinalCutPro[192]
    objc[192]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:18:37 PM [0x0-0x15015].com.apple.FinalCutPro[192]
    objc[202]: Class MIOTimecodeField is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class MIOTimecodeFieldTextView is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class MIOTimecodeFieldFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class MIOTimecodeSearchFormatter is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/ProAppsIntegration.bundle/Contents/MacOS/ProApps Integration. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Pro.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined. 1/11/11 1:20:24 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class OutputTexture is implemented in both /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/FxPlugWrapper.plugin/Contents/MacOS/FxPlugWrapper and /Library/Application Support/ProApps/Internal Plug-Ins/ProFX/QCMotionPatch.plugin/Contents/MacOS/QCMotionPatch. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]
    objc[202]: Class objCWrapper is implemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and /Applications/Motion.app/Contents/Frameworks/Ozone.framework/Ozone. One of the two will be used. Which one is undefined. 1/11/11 1:20:27 PM [0x0-0x18018].com.apple.FinalCutPro[202]

  • Adding new fields in Item details screen in VA01 tcode

    Hi all,
    My requirement is to add custom fields in 'Additional Data B' tab of VA01 transaction.
    That is, after entering the material and quantity, if i double click tat material, it goes to item details screen. In taht, 'Additional data B' tab is there with no fields.
    Now i want to add fields in that.. Is it possible?
    Is there any exit for adding custom fields under that tab?
    Pls tell me the procedure..
    Regards,
    Shanthi

    The process for Additional Data B, whether header or item level, is simple... 
    First, add the data elements to VBAK (header) or VBAP (item), in a customizing append.  The accepted practice is to name your fields beginning ZZ, with the appropriate or custom data element/domain.
    Then on Additional Data B screens, already named in this thread, create whatever is needed.  For instance, you might want to add a subscreen that contains a group of fields with the DDIC-specific captions.
    If you simply need a field, you can place the field (like VBAK-ZZMYFIELD).   SAP will then manage updates to the database for you....no need to do anything to see that the data gets copied into the tables.
    In one instance, I saw a pushbutton added that resulted in calls to screens with table controls, etc., essentially an entire subsystem called by pressing that button....

  • I have the 5.5 Lightroom software on my I-Mac with OS-X, 10.9.3. It seems I have lost 850 pictures I was developing. It all started when was adding a folder. A new screen came up with no photos.  I went back to my external drive, trying to open the folder

    I have the 5.5 Lightroom software on my I-Mac with OS-X, 10.9.3. It seems I have lost 850 pictures I was developing. It all started when was adding a folder. A new screen came up with no photos.  I went back to my external drive, trying to open the folder (containing the pictures I was working on), an icon "Thumbs" came up. When I click on it, a message "can't find the application" came up, there is no picture to be found. Please help.  Frustrated-George

    Have you tried resetting the SMC ?     >  Resetting the System Management Controller (SMC)

  • Best practice for timing of Transfer of forecast to R/3 Demand Management

    Hi All,
    I have APO DP 4.0 with monthly bucket. What is best practice to transfer the planning results to R/3. Meaning how many times we should transfer it?
    And when forecast (PIR) is transfered it replaces the old PIR in demand management for that month. How it will affect the consumption of forecast in R/3? Meaning let us say in same month first time forecast transfered was 100 and by middle of the month 50 has been consumed. Now in same month forecast has been carried out and now 200 has been calculated for the same month and transfered to R/3. Now ideally the remaining quantity to be made should be 150 in R/3. Is it so? Any idea?
    TBR, MM

    Hi Somnath,
    Thanks for the reply. The problem with frequent transfer of forecast to R/3 demand management is that the latest forecast ignores the prior shipments made in that month.
    I will give numeric example:
    Let us say we are in September month and in first week transfered forecast of 100 for one product to demand management. In first two weeks 40 items have been shipped so remaining is 60.
    Now we are in third week and planner realizes that instead of 100 we needed to plan 150 and 150 number is sent to R/3 demand management as a fresh forecast for that month.
    Now for September month we should see net demand as 110 (=150-40). Somehow this is not happening. It shows as a whole 150 net demand. Any idea why it is not happening.
    Thanks and Best Regards, Manoj

Maybe you are looking for

  • Changing default outgoing email address

    So, my AppleID is an @me.com address.  I created when I was still in college and put my birth year into the ID out of frustration that [email protected] had already been taken; for the purpose of this we'll call it [email protected] I've since recogn

  • Conflict resolution between Outlook and iPhone

    Once again, when trying to resolve conflicts between my Outlook and my iPhone, I am told that the system can't access the server and conflicts can't be resolved.  This error message commenced with IOS 5 and one could expect it to be resolved by now. 

  • ERS - Payment method not on the invoice

    Hi All, In the process of creating invoices using ERS, the payment method from the vendor master will not be defaulted on the invoice. Is there any way, may be a usereixt/badi, to default the first payment method given in the vendor master on the inv

  • When edit in photoshop, the edited image is added to the catalog in a duplicate of the same volume..

    Ok, this is realy strange... I edit in photoshop a cr2 file from a canon 20d Once done with the edit, i clic save in photoshop The file is saved as a tif but, in the folder view in the library, i now have 2 instances of the same volume... In the firs

  • V570: can't boot Windows 8 install DVD

    I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been